Repair and Diagnosis (Single Page)

You are viewing the full "tree" of links on one page. This can load slowly, but is easier to search. The same page can appear multiple times under a different folder, that is why the page is so large.
View "split tree" where inner folders are split out. where inner links are on separate pages.

Expand All (for easy ctrl-f) Collapse All

• Quick Lookups
  • Common Specs & Procedures
    • Specifications Index
  • DTC Index
    • Anti-Lock/Traction Control
    • Electronic Power Steering
      • Without ESP, BAS & SPS
      • With ESP, BAS & SPS
      • With ABS, ASR, ETS & SPS
    • Keyless Entry Systems - SL500, SL600
    • Engine Performance DTCS
      • SL320
        • SL320 (1994-1996)
        • SL320 (1997)
      • SL500
        • SL500 (1996-1999)
        • SL500 (2001-2002)
        • DI ENGINE 119 (description only)
        • LH ENGINE 119 (description only)
      • SL600
        • SL600 (with test)
        • DI ENGINE 120 (description only)
        • LH ENGINE 120 (description only)
    • HVAC DTCS
      • SL500 (1998-1999)
      • SL500 (2000-2001)
      • SL320, SL500, SL600 (1990-2002)
    • Restraint DTCS
      • SL320, SL500 (1996)
      • SL320, SL500 (1997)
      • SL500 (1998)
      • SL500 (1999)
      • SL500, SL600 (2000)
      • SL500, SL600 (2001)
  • Electrical Component Locations
    • Diagnostic Connector (DLC) Locations
      • Domestic Cars
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Domestic Light Trucks & Vans
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Imported Cars & Trucks
        • ACURA
        • AUDI
        • BENTLEY
        • BMW
        • DAIHATSU
        • CHRYSLER Group LLC
        • FERRARI
        • Ford Motor Co.
        • General Motors
        • HONDA
        • HYUNDAI
        • INFINITI
        • ISUZU
        • Jaguar
        • KIA
        • Land Rover
        • LEXUS
        • MAZDA
        • MERCEDES-BENZ
        • MITSUBISHI
        • NISSAN
        • PEUGEOT
        • PORSCHE
        • RENAULT
        • Rolls-ROYCE
        • SAAB
        • SUBARU
        • SUZUKI
        • TOYOTA
        • VOLKSWAGEN
        • VOLVO
    • Electrical Component Locator
      • Buzzers, Relays & Timers
      • Circuit Protection Devices
      • Control Units
      • Motors
      • Sending Units & Sensors
      • Solenoids & Solenoid Valves
      • Switches
      • Miscellaneous
      • Component Location Graphics
  • Fluids
  • Technical Bulletins
    • Campaigns
    • Safety Recalls
    • Technical Service Bulletins
  • Tire Fitment
  • Wiring Diagrams
    • OEM Connector End Views -- 129 Chassis
      • Connector End Views
        • 5-Speed AT/Engine Connector End View (X22/5)
        • AAC [KLA] Control And Operating Unit Connector End View (N22)
        • AAC/TAC [KLA/TAU] Center And Side Air Outlet Control System Connector End View (N18/2)
        • ABS Control Module Connector End View (N30)
        • ABS Hydraulic Unit Connector End View (A7)
        • ABS/ASR Control Module Connector End View (N30/1)
        • AC Wiring Harness And Engine Wiring Harness Connector End View (X85/1)
        • Accelerator Pedal Sensor Connector End View (B37)
        • ADS Comfort/Sport Switch Connector End View (S45/1)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/5)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/6)
        • ADS/Engine-Chassis Connector End View (X33/15)
        • ADS/Suspension Control Unit Connector End View (N51)
        • Air Injection Relay Connector End View (K17)
        • Amplifier For Sound System Connector End View (N40/3)
        • ASD Control Module Connector End View (N30/2)
        • ASR/SPS [PML] Control Unit Connector End View (N47-1)
        • ATA [EDW] Control Unit Connector End View (N26)
        • Automatic Antenna Connector End View (M11)
        • Automatic Transmission/Engine Connector (8-Pin) Connector End View (X22/2)
        • BAS Control Unit Connector End View (N48)
        • Base Module (GM) Connector End View (N16/1)
        • CC/ISC [TPM/LLR] Actuator Connector End View (M16/2)
        • CD Player With Changer (In Trunk) Connector End View (A2/6)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (K24)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (M14/1)
        • Cockpit/Module Box Separation Point (18-Pin) Connector End View (X35/7)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/15)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/16)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/26)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/63)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/7)
        • Combination Relay (Turn Signal Indicators With Trailer Hitch, Heated Rear Window, Wiper Motor, ATA [EDW]) Connector End View (N10/2)
        • Combination Relay (Turn Signal Indicators, Heated Rear Window, Wiper Motor) Connector End View (N10)
        • Combination Switch Connector End View (S4)
        • Comfort Shift Relay Connector End View (H7)
        • Comfort Shift Relay Connector End View (K24)
        • Control Unit Box/Engine Separation Point Connector End View (X35/63)
        • Cruise Control (CC [TPM])/Idle Speed Control (ISC [LLR]) Control Unit Connector End View (N4/3)
        • CTEL Transmitter-Receiver Junction Box (12-Pole) Connector End View (X39/11)
        • CTEL Transmitter-Receiver/Voice Activation Module Connector End View (A35/10)
        • DAS [FBS] Radio Frequency/Infrared Control Unit Connector End View (N54/4)
        • Data Link Connector End View (X11/4)
        • Daytime Running Lamp Control Unit Connector End View (N35)
        • DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/3)
        • Diagnosis II Test Connector End View (X11/22)
        • Diagnostic Module (OBD I) Connector End View (N59)
        • Diagnostic Module (OBD II) Connector End View (N59/1)
        • Dome Lamp With Shut-Off Delay And Reading Lamp Connector End View (E15)
        • Drive Authorization System Infrared Control Unit Connector End View (N54/1)
        • E-Call/Taillamp Wiring Harness Connector End View (X18/32)
        • EA/CC/ISC [EFP/TPM/LLR] Actuator Connector End View (M16/1)
        • EA/CC/ISC [EFP/TPM/LLR] Control Unit Connector End View (N4/1)
        • Electrically Adjustable Inside Rearview Mirror With Memory Connector End View (M21/3)
        • Electronic Mirror Dimming Connector End View (H7)
        • Emergency Tensioning Retractor (ETR [GUS]) With Airbag (AB) Control Unit Connector End View (N2/2)
        • Engine Separation Point Connector End View (X26/2)
        • Engine Systems Control Unit (ESCU [MAS]) Connector End View (N16)
        • ESP Yaw Rate Sensor Connector End View (N64)
        • ESP, SPS [PML] And BAS Control Unit Connector End View (N47-5)
        • ETC [EGS] Control Unit Connector End View (N15/3)
        • ETS/SPS [PML] Control Unit Connector End View (N47-2)
        • Fanfare Horn Relay Connector End View (K39)
        • Front ATA [EDW]/Rear ATA [EDW] Connector (4-Pin) Connector End View (X42)
        • Front Axle Level Sensor Connector End View (B22/2)
        • Fuel Pump Relay Connector End View (K27)
        • Gear Recognition Switch (Voltage Coded) Connector End View (S16/10)
        • Hands-Free System, Radio/Telephone Speaker Selection Relay Connector End View (A35/2)
        • Hazard Warning Flasher And CL [ZV] Switch Group Connector End View (S6)
        • HeadLamp Cleaning System (HCS [SRA]) Relay Connector End View (K2)
        • HeadLamp Harness Connector End View (X24)
        • Headlamp Range Adjustment Control Unit Connector End View (N71)
        • Heated Rear Window Switch Connector End View (S14)
        • Heating Systems, Automatic Heater, Tempmatic, Automatic Air Conditioning (HEAT [HAU], TAC [TAU], AAC [KLA])/Interior Connector (12-Pin) Connector End View (X85/2)
        • HFM-SFI [HFM] Control Unit Connector End View (N3/4)
        • Hot Film Mass Air Flow Sensor Connector End View (B2/5)
        • Hot Film Mass Air Flow Sensor Connector End View (M16/2)
        • Hot Wire Mass Air Flow Sensor Connector End View (B2/2)
        • Ignition/Starter Switch Connector End View (N16/1)
        • Ignition/Starter Switch Connector End View (S2/1)
        • Immobilizer Relay Connector End View (K38)
        • In-Car Temperature Sensor Connector End View (B10/4)
        • Infrared Remote Central Locking (IRCL [IFZ]) Control Unit Connector End View (N54)
        • Injection System Control Unit Connector End View (N3)
        • Instrument Cluster Connector End View (A1)
        • Interior And Taillamp Wiring Harness Connector (12-Pin) Connector End View (X18)
        • Interior/Engine Connector (12-Pin) Connector End View (X26)
        • Interior/Taillamp Harness Connector End View (X18/3)
        • Interior/Transmission Connector End View (X26/12)
        • Kickdown Switch (2nd Transmission Mode) Connector End View (S16/7)
        • Kickdown Switch Connector End View (S16/6)
        • Lamp Monitoring Unit Connector End View (N7)
        • Left DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/4)
        • Left EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Right Of Engine Connector End View (M16/4)
        • Left Electrically Adjustable And Heated Outside Mirror Connector End View (M21/1)
        • Left Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/7)
        • Left Front ESA Switch Group (With Memory) Connector End View (S91)
        • Left Front Lamp Unit Connector End View (E1)
        • Left Front Power Window Motor Connector End View (M10/3)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/1)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Left Front Seat Adjustment Control Unit With Memory Connector End View (N32/1)
        • Left Front Seat Contacting Strip Connector End View (X55/3)
        • Left Front Seat Heater Switch Connector End View (S51/1)
        • Left Headlamp Wiper Motor Connector End View (M6/2)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/6)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/7)
        • Left Hot Wire MAF Sensor, Right Side Of Engine Connector End View (B2/3)
        • Left ME-SFI [ME] Control Unit Connector End View (N3/11)
        • Left O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/5)
        • Left O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/3)
        • Left Taillamp Connector End View (E3)
        • Left Turn Signal Lamp Connector End View (E6/1)
        • LH-SFI [LH] Control Unit Connector End View (N3/1)
        • Manual Transmission/Engine Connector (4-Pin) Connector End View (X22/4)
        • MB-Info And Breakdown Assistance Button Group Connector End View (S93/6)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 1)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 2)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. A)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. B)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. C)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. D)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. E)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. F)
        • Module Box Separation Point/Taillamp Wiring Harness Connector End View (X35/15)
        • Module Box/Engine Separation Point Connector End View (X35/26)
        • Module Box/Taillamp Wiring Harness Separation Point (13-Pin) Connector End View (X35/16)
        • MSC [ESL] Control Unit (With Memory) Connector End View (N32/9)
        • Multifunction Block Connector Connector End View (X30/1)
        • O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/1)
        • O2 Sensor Heater Downstream Of TWC [KAT] Relay Connector End View (K35)
        • O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/2)
        • Outside Mirror Switch With Mirror Fold-In/Fold-Out Facility Connector End View (S50/1)
        • Outside/Inside Rearview Mirror Switch Connector End View (S50)
        • Overvoltage Protection Relay, Circuit 87E/87L/30a (9-Pin) (Series K1/1) Connector End View (K1/2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 1)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. X, Conn. Z)
        • Power Soft Top Control Unit Connector End View (N52, Conn. Y)
        • Radio Connector End View (A2, Conn. 1)
        • Radio Connector End View (A2, Conn. A, Conn. B)
        • Radio Control Panel Connector End View (A2/4)
        • Rear Axle Level Sensor Connector End View (B22/3)
        • Rear Axle Level Sensor Connector End View (X33/9)
        • Rear Axle Multiple Circuit Junction Connector End View (X62/8)
        • Receiver/Amplifier (In Trunk) Connector End View (A2/3)
        • Right DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/5)
        • Right EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Left Of Engine Connector End View (M16/3)
        • Right Electrically Adjustable And Heated Outside Mirror Connector End View (M21/2)
        • Right Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/6)
        • Right Front ESA Switch Group (With Memory) Connector End View (S92)
        • Right Front Lamp Unit Connector End View (E2)
        • Right Front Power Window Motor Connector End View (M10/4)
        • Right Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Right Front Seat Adjustment Control Unit With Memory Connector End View (N32/2)
        • Right Front Seat Contacting Strip Connector End View (X55/4)
        • Right Front Seat Heater Switch Connector End View (S51/2)
        • Right Headlamp Wiper Motor Connector End View (M6/3)
        • Right Hot Wire MAF Sensor, Left Side Of Engine Connector End View (B2/4)
        • Right ME-SFI [ME] Control Unit Connector End View (N3/12)
        • Right O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/6)
        • Right O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/4)
        • Right Taillamp Connector End View (E4)
        • Right Turn Signal Lamp Connector End View (E6/2)
        • Roll Bar (RB [URB]) Control Unit - Crash Deployment Connector End View (N53)
        • Rotary Light Switch Connector End View (S1)
        • Seat Belt Warning Module Connector End View (N2/4)
        • SRS Test Connector (10-Pin) Connector End View (X11/13)
        • Starter Lock-Out And Back-Up Lamp Switch Connector End View (S16/1)
        • Starter Lock-Out And Back-Up Lamp Switch/Selector Lever Position Recognition Connector End View (S16/3)
        • Starter Lockout Relay Connector End View (K38/3)
        • Starter Wiring Harness Connector (5-Pin) Connector End View (X27)
        • Steering Angle Sensor Connector End View (N49)
        • Steering Column Adjustment Control Unit/Motor Connector (8-Pin) Connector End View (X54/7)
        • Telephone Control (Eyeglass Compartment) Connector End View (A35/3)
        • Telephone Handset Connector End View (A34/1)
        • Telephone Transmitter/Receiver Connector End View (A34)
        • Telephone Transmitter/Receiver Connector End View (A35)
        • Temperature Sensor Connector End View (B10/4)
        • Traction System Hydraulic Unit Connector End View (A7/3)
        • Transmission Control Unit (TCU) (5-Speed Automatic) Connector End View (N15/1)
        • Transmission Mode 'B' Engagement Switch Connector End View (S16/8)
        • Transmitter/Receiver Operating Unit/Plug Distributor Separation Point (12-Pin) Connector End View (X39/10)
        • Wiper Motor Connector End View (X88/2)
        • Wiper System Relay Connector End View (K26)
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Accessories & Equipment
  • Accessories Control Systems
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
  • Anti-Theft Systems
    • Anti-Theft & Central Locking System -- 129 Chassis
      • Basic Knowledge
        • Infrared remote control for central locking with drive authorization system stage X, function - GF80.30-P-0002A
          • Notes
          • Infrared remote control for central locking with drive authorization system stage X, location of components - GF80.30-P-0002-01A
        • Function of drive authorization system stage X - GF80.30-P-2002A
        • Remote control key with transponder, purpose/design/function - GF80.30-P-4001A
        • Purpose of drive authorization system (DAS) infrared control module - GF80.30-P-4003-01B
        • Transponder, location/purpose/design/function - GF80.30-P-4006A
        • Transponder coil, location/purpose/function - GF80.30-P-4007A
        • Anti-theft alarm (ATA), location of components - GF80.50-P-0001-02D
        • Activating anti-theft alarm, function - GF80.50-P-2002
          • Activating anti-theft alarm, function - GF80.50-P-2002F
          • Activating anti-theft alarm (ATA), function - GF80.50-P-2002H
        • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003F
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003H
        • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004
          • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004F
          • Tripping of anti-theft alarm (ATA), function - GF80.50-P-2004H
      • Testing & Repair
        • Testing and repair work: Passenger cars: Central locking, convenience feature, drive authorization system - AR80.00-Z-9129AA
        • Checking batteries for infrared remote control key - AR80.30-P-4205CA
        • Removing, installing batteries for infrared remote control key - AR80.30-P-4210CA
        • Synchronizing infrared remote control signal - AR80.30-P-4215CA
        • Removing and installing folding key in infrared remote control key - AR80.30-P-4220CA
        • Removing and installing front door infrared remote control receiver - AR80.30-P-4305C
        • Removing and installing infrared remote central locking function indicator for front door - AR80.30-P-4310C
        • Removing and installing trunk lid IR receiver (A26/3) - AR80.30-P-4350C
        • Removing and installing infrared drive authorization system control module - AR80.30-P-4500C
        • Removing and installing transponder coil - AR80.30-P-4515CA
        • Checking remote control key batteries - AR80.35-P-4205G
        • Replacing batteries for remote control key - AR80.35-P-4210G
        • Synchronizing transmission signal of remote control - AR80.35-P-4215G
        • Removing, installing folding key in remote control key - AR80.35-P-4220G
        • Removing and installing control module for radio frequency remote control - AR80.35-P-4500C
        • Removing and installing ATA alarm signal siren - AR80.50-P-9840C
      • Repair & Adjustments
        • Function description of central locking - RA80001290010X(80-010)
        • Checking function of central locking - RA80001290090X(80-090)
        • Checking electrical function of central locking - RA80001290104X(80-104)
        • Checking pneumatic function of the supply pump - RA80001290108X(80-108)
        • Checking electrical function of the actuator - RA80001290112X(80-112)
        • Checking pneumatic function of the actuator - RA80001290116X(80-116)
        • Checking central locking for leaks - RA80001290120X(80-120)
        • Checking pneumatic line for leaks - RA80001290125X(80-125)
        • Removing, installing and checking switchover valve - venting central locking on driver's door Y65/1, and passenger door Y65/2 (vehicles up to 12/93) - RA80001290130X(80-130)
        • Removing and installing actuator (S47, S48, S49) - RA80001290215X(80-215)
        • Removing and installing tank flap element - RA80001290230X(80-230)
        • Removing and installing supply pump (M14/1, M14/2) - RA80001290270X(80-270)
        • Function description of interior central locking - RA80001290300X(80-300)
        • Checking function of interior central locking - RA80001290305X(80-305)
        • Checking electrical function of interior central locking - RA80001290310X(80-310)
        • Removing, installing and checking the interior central locking switch (S85) - RA80001290312X(80-312)
        • Checking interior central locking for leaks - RA80001290320X(80-320)
        • Removing and installing glove box/spectacles compartment element - RA80001290350X(80-350)
        • Removing and installing front door pocket element - RA80001290355X(80-355)
        • Removing and installing rear door pocket element - RA80001290360X(80-360)
        • Removing and installing center stowage compartment element - RA80001290365X(80-365)
        • Removing and installing cassette compartment element - RA80001290370X(80-370)
        • Removing and installing rear luggage compartment element - RA80001290375X(80-375)
        • Function description of infrared remote control - RA80001290400X(80-400)
        • Checking signal from infrared remote control key - RA80001290421X(80-421)
        • Removing and installing infrared remote control module (N54) - RA80001290440X(80-440)
        • Function diagram of central locking - RA80001290900X(80-900)
        • Function diagram of interior central locking - RA80001290910X(80-910)
    • Anti-Theft Systems
      • Description & Operation
      • Programming
        • Anti-Theft Control Module
      • Trouble Shooting
        • Anti-Theft System Inoperative
        • Anti-Theft System Cannot Be Armed With Remote Transmitter
        • Lights & Horn Do Not Operate When Activating Alarm
        • Anti-Theft Indicator Inoperative
        • Anti-Theft System Does Not Trigger When Front Door Is Opened
        • Anti-Theft System Does Not Trigger When Trunk Is Opened
        • Anti-Theft System Does Not Trigger When Hood Is Opened
        • Anti-Theft Horn Inoperative
        • Anti-Theft Lights Inoperative
        • Anti-Theft System Cannot Be Turned Off With Remote Transmitter
        • Anti-Theft System Does Not Trigger When Vehicle Is Towed
      • Function Tests
        • Anti-Theft Status Indicator Light
        • Left Door
          • Activate Anti-Theft System Using Left Door
        • Right Door
          • Activate Anti-Theft System Using Right Door
        • Engine Hood
          • Activate Anti-Theft System Using Hood
        • Trunk Lid
          • Activate Anti-Theft System Using Trunk Lid
        • Anti-Tow Protection
          • Activate Anti-Tow Protection
          • De-Activate Anti-Tow Protection
      • Self-Diagnostic System
        • Retrieving & Clearing Codes
      • System Tests
        • Notes
        • Test Preparation
        • Test 1: Anti-Theft Control Module
        • Test 3.0: Central Locking System "Open" Signal
        • Test 3.1: Central Locking System "Close" Signal
        • Test 6: Door Contact Switches
        • Test 7: Trunk Lid Microswitch
        • Test 8: Engine Hood Switch
        • Test 11: Ignition Switch Alarm Circuit
        • Test 13: Alarm Horn
        • Test 14: Diagnosis Output
        • Test 16: Headlight Alarm Circuit
        • Test 17: Taillight Alarm Circuit
        • Test 19: Anti-Theft Status Indicator Light
        • Test 20: Anti-Tow Protection Switch Activation
        • Test 23: Anti-Tow Protection Sensor
        • Test 24: Anti-Tow Protection Switch Actual Values
      • Removal & Installation
      • Wiring Diagrams
    • Doors & Windows -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Doors - AR72.00-Z-9129AA
        • Removing and installing door liner on front door - AR72.10-P-1000A
        • Removing and installing power window motor in front door - AR72.29-P-1860A
      • Repair & Adjustments
        • Removal, installation and adjustment of driver's door - RA72001290050X(72-050)
        • Removal and installation of door liner - RA72001290100X(72-100)
        • Disassembly and assembly of door liner - RA72001290103X(72-103)
        • Removal and installation of inner rail - RA72001290160X(72-160)
        • Removal and installation of outer rail - RA72001290170X(72-170)
        • Removal and installation of window lift - RA72001290181X(72-181)
        • Removal and installation of crank window - RA72001290190X(72-190)
        • Adjustment of crank windows - RA72001290195X(72-195)
        • Removal and installation of window guide, front - RA72001290200X(72-200)
        • Removal and installation of door holder - RA72001290210X(72-210)
        • Removal and installation of door sealing frame - RA72001290220X(72-220)
        • Removal and installation of inside door control - RA72001290230X(72-230)
        • Removal and installation of outside door handle - RA72001290240X(72-240)
        • Removal and installation of door lock - RA72001290250X(72-250)
        • Removal and installation of striker eye - RA72001290260X(72-260)
  • Collision/Avoidance
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
  • Communication Devices
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
  • Cruise Control Systems
    • Throttle Control, Speed Control Systems -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9104AB
        • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9113AB
        • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9119AB
        • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9120AB
        • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9129AA
        • Adjusting throttle/accelerator control - AR30.10-P-1010
          • Adjusting throttle control - AR30.10-P-1010BA
          • Adjust throttle control - AR30.10-P-1010D
          • Adjusting throttle control - AR30.10-P-1010EA
            • Notes
            • Turning connecting rod - AR30.10-P-1010-01E
          • Adjusting throttle control - AR30.10-P-1010EB
          • Adjusting accelerator control - AR30.10-P-1010EC
          • Adjusting throttle control - AR30.10-P-1010F
          • Adjusting accelerator control - AR30.10-P-1010FA
        • Removing and installing throttle control cable - AR30.10-P-3400
          • Removing and installing throttle control cable - AR30.10-P-3400D
          • Removing and installing throttle control cable - AR30.10-P-3400E
          • Removing and installing throttle control cable - AR30.10-P-3400EA
          • Removing and installing throttle control cable - AR30.10-P-3400F
        • Remove/install accelerator pedal - AR30.12-P-1321D
        • Removing and installing firewall pivot point with accelerator pedal lever - AR30.12-P-3022D
        • Removing and installing electronic accelerator actuator with throttle valve body/flap connection - AR30.20-P-1262
          • Remove/install electronic accelerator actuator with flap connection - AR30.20-P-1262A
          • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262E
          • Removing and installing electronic accelerator with throttle valve body - AR30.20-P-1262EA
          • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262F
          • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262FA
        • Removing and installing idle speed control (ISC) actuator - AR30.22-P-1152D
      • Repair & Adjustments
        • Removing and installing potentiometer of electronic accelerator pedal - RA30001041156X(30-1156)
        • Removing and installing actuator of electronic accelerator pedal/ Tempomat cruise control - RA30001041262X(30-1262)
        • Removing and installing accelerator pedal - RA30001041321X(30-1321)
          • Removing and installing accelerator pedal - RA30001041321X(30-1321)
          • Removing and Installing Accelerator Pedal - RA30001191321X(30-1321)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA3000104TA00X
        • Removing and Installing Firewall Bearing Point with Accelerator Pedal Lever - RA30001190012X(30-0012)
          • Removing and Installing Firewall Bearing Point with Accelerator Pedal Lever - RA30001190012X(30-0012)
          • Removing and installing fire wall pivot point with accelerator lever - RA30001040012X(30-0012)
        • Removing and Installing Bowden Cable - RA30001190025X(30-0025)
          • Removing and installing Bowden cable - RA30001040025X(30-0025)
          • Removing and Installing Bowden Cable - RA30001190025X(30-0025)
        • Removing and Installing Electronic Accelerator Pedal/ Cruise Control Actuator - RA30001190472X(30-0472)
        • Removing and Installing Electronic Accelerator Pedal Potentiometer - RA30001190566X(30-0566)
        • Adjusting Throttle Control - RA30001191010X(30-1010)
          • Adjusting throttle control - RA30001041010X(30-1010)
          • Adjusting Throttle Control - RA30001191010X(30-1010)
        • Technical Modifications Engine 119 Combustion KE Injection - RA3000119TA00X
        • Functional description (for manual transmission version valid up to May 93) - RA30001240500X(30-500)
        • Testing with adapter - RA30001240504X(30-504)
        • Testing reference resistor - RA30001240506X(30-506)
        • Removal and installation of cruise control actuator - RA30001240541X(30-541)
        • Removal and installation of push-button switch - RA30001240545X(30-545)
        • Adjusting connecting rod or control cable - RA30001240561X(30-561)
        • Removal and installation of cruise control amplifier - RA30001240565X(30-565)
        • Removal and installation of cruise control reference resistor - RA30001240566X(30-566)
        • Removal and installation of switch on clutch pedal (up to May 93) - RA30001240575X(30-575)
        • Layout of connectors - RA30001240579X(30-579)
        • Programmed repair - Tempomat/cruise control - RA3000124PR00X
        • Technical revisions - Cruise control/Tempomat - Models 124, 129, 140, 201 - RA3000124TA00X
        • Electronic accelerator pedal, Tempomat cruise control/idle speed control - RA3000FLH0010X(30-0010)
          • Electronic accelerator pedal, Tempomat cruise control/idle speed control - RA3000FLH0010X(30-0010)
            • A: Location of components
            • B: Block diagram electronic accelerator pedal
            • C: Function of electronic accelerator pedal
            • D: Block diagram Tempomat cruise control/idle speed control
            • E: Function of Tempomat cruise control/idle speed control (engines 104, 119 in model 140)
            • F: Function of idle speed control
            • G: Notes regarding towing vehicle, test and repair work
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3A010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3B010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3C010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3D010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3E010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3F010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3G010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3H010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3I010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3J010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3K010X(30-0010)
          • Design and operation of electronic accelerator pedal (ASR) - RA3000KE3L010X(30-0010)
          • Notes on towing as well as test and adjustment work - RA3000TPM0010X(30-0010)
        • Design and operation of accelerator control - RA3000KE30001X(30-0001)
        • General - RA3000TPM0000X(30-0000)
        • Brief description - RA3000TPM0002X(30-0002)
        • Location of components - RA3000TPM0004X(30-0004)
        • Function description - RA3000TPM0006X(30-0006)
        • Individual functions - RA3000TPM0008X(30-0008)
        • Wiring diagrams - RA300A1240580X(30-580)
          • Wiring diagrams - RA300A1240580X(30-580)
          • Wiring diagrams - RA30011240580X(30-580)
      • Component Modifications
        • Bell crank of right-hand steering/left-hand steering standardized - BT30.10-P-0001-01A
        • Return spring between fulcrum lever and accelerator control lever modified - BT30.10-P-0002-01A
        • Anti-twist lock of WOT stop enlarged - BT30.10-P-0003-01A
  • Entertainment Systems
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
  • Exterior Lights
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
  • Gauges & Instrument Panels
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
    • Instrument Panels - Cl500, CLK320, CLK430, S320, S420, S430, S500 & SL500
      • Description
        • Cl & S Class
        • SL Class
      • Operation
        • Abs Malfunction Indicator Light
        • Airbag Off Indicator Light
        • BAS/Esp Malfunction Indicator Light
          • SL Class
        • Brake Pad Wear Indicator Light
          • SL Class
        • Brake Warning Light
        • Check Engine Indicator Light
        • Electronic Stability Program (Esp) Warning Light
        • Exterior Light Failure Indicator Light
          • Notes
          • SL Class
        • Flexible System Service (FSS) Indicator
          • CL & S Class
          • SL Class
        • Headlight Switch
        • Low Engine Oil & Coolant Warning
        • Low Fuel & Fuel Cap Placement Warning Light
        • Roll Bar Warning Light
          • SL Class
        • Supplemental Restraint System (SRS) Warning Light
      • Programming
        • Resetting Flexible System Service (FSS) Indicator
          • CL & S Class
          • SL Class
        • Enabling Code Function For Radio
          • Notes
          • SL Class
        • Reactivating Steering Angle Sensor
      • System Tests
      • Removal & Installation
        • Notes
        • Light Module
          • Notes
          • Removal & Installation (CL Class)
          • Removal & Installation (S Class)
        • Instrument Cluster
          • Removal & Installation (CL & S Class)
          • Removal & Installation (SL Class)
  • Headlights
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
  • Heated Glass/Defoggers
    • Windows -- 129 Chassis
      • Safety Precautions
        • Risk of injury caused by slipping when clamping blade in the multicutter and by glass splinters when cutting out bonded windows - AS67.00-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Windows - AR67.00-Z-9129AA
        • Remove/install windshield - AR67.10-P-1000C
          • Notes
          • Cutting out windshield with cutting blades - AR67.10-P-1000-01C
          • Prepare window for installation - AR67.10-P-1000-03P
          • Aligning windshield in body opening - AR67.10-P-1000-04C
          • Preparing glue cartridge - AR67.10-P-1000-07K
          • Prepare glue cartridge - AR67.10-P-1000-07P
          • Apply adhesive material - AR67.10-P-1000-08P
        • Install windshield - AR67.10-P-1503
          • Prepare body flange for installation of window - AR67.10-P-1501-01CA
          • Prepare body flange for installation of window - AR67.10-P-1501-01P
          • Install windshield - AR67.10-P-1503-01C
        • Remove/install rear window - AR67.20-P-2000
          • Remove/install rear window - AR67.20-P-2000C
            • Notes
            • Cutting out rear window with cutter - AR67.20-P-2000-02C
            • Aligning rear window in body opening - AR67.20-P-2000-04C
            • Install rear window - AR67.20-P-2000-05C
          • Remove/install rear window - AR67.20-P-2000CA
            • Notes
            • Replacing rubber spacers - AR67.20-P-2000-03C
            • Aligning rear window in body opening - AR67.20-P-2000-04CA
        • Remove/install side window - AR67.30-P-2305C
          • Notes
          • Inserting side window - AR67.30-P-2305-03C
        • Cutting out side window with cutting blade - AR67.30-P-4050-01C
  • Horns
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
  • Ignition Switch/Steering Lock
    • Anti-Theft & Central Locking System -- 129 Chassis
      • Basic Knowledge
        • Infrared remote control for central locking with drive authorization system stage X, function - GF80.30-P-0002A
          • Notes
          • Infrared remote control for central locking with drive authorization system stage X, location of components - GF80.30-P-0002-01A
        • Function of drive authorization system stage X - GF80.30-P-2002A
        • Remote control key with transponder, purpose/design/function - GF80.30-P-4001A
        • Purpose of drive authorization system (DAS) infrared control module - GF80.30-P-4003-01B
        • Transponder, location/purpose/design/function - GF80.30-P-4006A
        • Transponder coil, location/purpose/function - GF80.30-P-4007A
        • Anti-theft alarm (ATA), location of components - GF80.50-P-0001-02D
        • Activating anti-theft alarm, function - GF80.50-P-2002
          • Activating anti-theft alarm, function - GF80.50-P-2002F
          • Activating anti-theft alarm (ATA), function - GF80.50-P-2002H
        • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003F
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003H
        • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004
          • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004F
          • Tripping of anti-theft alarm (ATA), function - GF80.50-P-2004H
      • Testing & Repair
        • Testing and repair work: Passenger cars: Central locking, convenience feature, drive authorization system - AR80.00-Z-9129AA
        • Checking batteries for infrared remote control key - AR80.30-P-4205CA
        • Removing, installing batteries for infrared remote control key - AR80.30-P-4210CA
        • Synchronizing infrared remote control signal - AR80.30-P-4215CA
        • Removing and installing folding key in infrared remote control key - AR80.30-P-4220CA
        • Removing and installing front door infrared remote control receiver - AR80.30-P-4305C
        • Removing and installing infrared remote central locking function indicator for front door - AR80.30-P-4310C
        • Removing and installing trunk lid IR receiver (A26/3) - AR80.30-P-4350C
        • Removing and installing infrared drive authorization system control module - AR80.30-P-4500C
        • Removing and installing transponder coil - AR80.30-P-4515CA
        • Checking remote control key batteries - AR80.35-P-4205G
        • Replacing batteries for remote control key - AR80.35-P-4210G
        • Synchronizing transmission signal of remote control - AR80.35-P-4215G
        • Removing, installing folding key in remote control key - AR80.35-P-4220G
        • Removing and installing control module for radio frequency remote control - AR80.35-P-4500C
        • Removing and installing ATA alarm signal siren - AR80.50-P-9840C
      • Repair & Adjustments
        • Function description of central locking - RA80001290010X(80-010)
        • Checking function of central locking - RA80001290090X(80-090)
        • Checking electrical function of central locking - RA80001290104X(80-104)
        • Checking pneumatic function of the supply pump - RA80001290108X(80-108)
        • Checking electrical function of the actuator - RA80001290112X(80-112)
        • Checking pneumatic function of the actuator - RA80001290116X(80-116)
        • Checking central locking for leaks - RA80001290120X(80-120)
        • Checking pneumatic line for leaks - RA80001290125X(80-125)
        • Removing, installing and checking switchover valve - venting central locking on driver's door Y65/1, and passenger door Y65/2 (vehicles up to 12/93) - RA80001290130X(80-130)
        • Removing and installing actuator (S47, S48, S49) - RA80001290215X(80-215)
        • Removing and installing tank flap element - RA80001290230X(80-230)
        • Removing and installing supply pump (M14/1, M14/2) - RA80001290270X(80-270)
        • Function description of interior central locking - RA80001290300X(80-300)
        • Checking function of interior central locking - RA80001290305X(80-305)
        • Checking electrical function of interior central locking - RA80001290310X(80-310)
        • Removing, installing and checking the interior central locking switch (S85) - RA80001290312X(80-312)
        • Checking interior central locking for leaks - RA80001290320X(80-320)
        • Removing and installing glove box/spectacles compartment element - RA80001290350X(80-350)
        • Removing and installing front door pocket element - RA80001290355X(80-355)
        • Removing and installing rear door pocket element - RA80001290360X(80-360)
        • Removing and installing center stowage compartment element - RA80001290365X(80-365)
        • Removing and installing cassette compartment element - RA80001290370X(80-370)
        • Removing and installing rear luggage compartment element - RA80001290375X(80-375)
        • Function description of infrared remote control - RA80001290400X(80-400)
        • Checking signal from infrared remote control key - RA80001290421X(80-421)
        • Removing and installing infrared remote control module (N54) - RA80001290440X(80-440)
        • Function diagram of central locking - RA80001290900X(80-900)
        • Function diagram of interior central locking - RA80001290910X(80-910)
    • Steering -- 129 Chassis
      • General Information
        • Evaluating steering rack when repairing accident vehicles - AH46.20-P-9409-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Steering - AR46.00-Z-9129AA
        • Removing and installing steering wheel - AR46.10-P-0100
          • Removing and installing steering wheel - AR46.10-P-0100A
            • Notes
            • Installation of replacement steering wheel - AR46.10-P-0100-01A
          • Removing and installing steering wheel - AR46.10-P-0100B
        • Removing and installing spring contact - AR46.10-P-0200A
          • Notes
          • Set the clock spring contact to center position - AR46.10-P-0200-01A
        • Removing and installing steering angle sensor - AR46.10-P-0300
          • Removing and installing steering angle sensor - AR46.10-P-0300A
            • Notes
            • Activating steering angle sensor - AR46.10-P-0300-01A
          • Removing and installing steering angle sensor - AR46.10-P-0300B
        • Removing and installing jacket tube - AR46.10-P-0400A
        • Dismantling and assembling rigid jacket tube - AR46.10-P-0500A
          • Notes
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01C
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01E
          • Dismantling and assembling inner jacket tube - AR46.10-P-0500-02C
        • Dismantling and assembling electrically adjustable jacket tube - AR46.10-P-0600A
          • Notes
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01A
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01B
          • Removing and installing lower bracket for jacket tube - AR46.10-P-0600-02A
          • Removing and installing motor for longitudinal steering column adjustment - AR46.10-P-0600-03A
          • Removing and installing jacket tube pressure element - AR46.10-P-0600-04A
        • Removing and installing lock cylinder - AR46.10-P-0800
          • Removing and installing lock cylinder - AR46.10-P-0800A
          • Removing and installing lock cylinder - AR46.10-P-0800C
        • Removing and installing steering lock - AR46.10-P-0900A
          • Notes
          • Unlock steering lock - AR46.10-P-0900-01A
        • Adjusting steering gear in vehicle - AR46.20-P-0100A
          • Notes
          • Adjusting friction torque of steering gear - AR46.20-P-0100-01A
        • Replacing sealing ring in lower steering gear cover - AR46.20-P-0200A
        • Removing and installing steering gear - AR46.20-P-0500B
          • Notes
          • Placing steering gear in center position - AR46.20-P-0500-01A
        • Fill power steering pump and bleed - AR46.30-P-0010
          • Fill power steering pump and bleed - AR46.30-P-0010A
          • Fill power steering pump and bleed - AR46.30-P-0010B
        • Checking oil pressure of power steering pump - AR46.30-P-0100
          • Checking oil pressure in power steering pump - AR46.30-P-0100A
          • Checking oil pressure of power steering pump - AR46.30-P-0100GH
        • Removing and installing power steering pump - AR46.30-P-0500
          • Removing and installing power steering pump - AR46.30-P-0500A
          • Removing and installing power steering pump - AR46.30-P-0500B
        • Remove/install drag link - AR46.40-P-0100A
        • Removing and installing tie rod - AR46.40-P-0200A
        • Remove/install steering idler arm, replacing plain rubber mount - AR46.40-P-0300A
      • Maintenance
        • Check and correct power steering fluid level - AP46.00-P-4611
          • Checking and adjusting oil level in power steering - AP46.00-P-4611BA
          • Check and correct power steering fluid level - AP46.00-P-4611BB
        • Inspect play of track rod and drag link joints, inspect rubber boots - AP46.00-P-4653BA
        • Check tie rod and center link for play - AP46.40-P-4650-01BA
      • Repair & Adjustments
        • Adjusting steering gear in vehicle - RA46001243230X(46-3230)
        • Removing and installing drag link - RA46001246177X(46-6177)
        • Removing and installing tie rod - RA46001247007X(46-7007)
        • Removing and installing contact spiral - RA46001248300X(46-8300)
        • Removal and installation of steering wheel - RA46001260610X(46-610)
        • Steering gear survey - RA4600FBL0001X(46-0001)
          • Steering gear survey - RA4600FBL0001X(46-0001)
          • Survey of steering gears - RA46097650001X(46-0001)
        • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Survey of power steering pumps (LHP)/tandem pumps (TANP) - RA46097650002X(46-0002)
        • Steering wheel survey - RA4600FBL0003X(46-0003)
        • General - RA4600FBL0005X(46-0005)
        • Functional survey - RA4600FBL0006X(46-0006)
        • Design and function of steering gear - RA4600FBL0010X(46-0010)
        • Design and function of electrical components in PARAMETER STEERING - RA4600FBL0020X(46-0020)
        • Design and function of power steering pump - RA4600FBL0050X(46-0050)
        • Design and function of tandem pump - RA4600FBL0060X(46-0060)
        • Function of electrically adjustable jacket tube - RA4600FBL0615X(46-0615)
        • Function of manually adjustable jacket tube - RA4600FBL0616X(46-0616)
        • Function of contact spiral between steering column tube and steering wheel - RA4600FBL0617X(46-0617)
        • Checking and adjusting friction torque of steering gear - RA46097650120X(46-0120)
        • Replacing steering gear when performing repairs to vehicle involved in accident - RA46097650140X(46-0140)
        • Removing and installing parameter steering (PML) P-valve (Y10) - RA46097650231X(46-0231)
        • Removing, installing and checking bearing cover with pitman arm shaft - RA46097650232X(46-0232)
        • Disassembling and assembling pitman arm shaft/bearing cover - RA46097650233X(46-0233)
        • Removing and installing adjusting screw - RA46097650234X(46-0234)
        • Removing, installing and checking play compensator - RA46097650235X(46 - 0235)
        • Removing and installing steering shaft/bearing cover, replacing radial seal ring - RA46097650236X(46-0236)
        • Removing, installing and checking control valve - RA46097650238X(46 - 0238)
        • Filling and bleeding the power steering pump/tandem pump - RA46097650715X(46-0715)
        • Technical modifications -steering gear 765.9 Models 124, 129, 140, 201, 202 and power steering pumps - RA4609765TA00X
        • Disassembling and assembling power steering pump/tandem pump - RA46A97650730X(46-0730)
        • Tandem pump models 67, 167 - RA46C97650730X(C.)
      • Component Modifications
        • 2nd version of steering lock - BT46.10-P-0001-01A
        • 3rd version of steering lock - BT46.10-P-0002-01A
        • 4th version of steering lock - BT46.10-P-0003-01A
        • 5th version of steering lock - BT46.10-P-0004-01A
  • Infotainment
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
  • Interior/Exterior Trim
    • Detachable Body Components -- 129 Chassis
      • General Information
        • General information on repair to detachable plastic components - AH88.00-P-1000-01A
      • Testing & Repair
        • Repairing plastic detachable body components - AR88.00-P-1000A
          • Notes
          • Using plastic repair box - AR88.00-P-1000-01A
        • Testing and repair work: Passenger cars: Detachable body components, exterior flaps - AR88.00-Z-9129AA
        • Removing and installing trunk lid remote control - AR88.50-P-5035C
        • Removing and installing pneumatic element for putting up trunk lid - AR88.50-P-5037C
        • Removing and installing remote trunk lid release switch - AR88.50-P-5040C
        • Removing and installing molding on side window - AR88.85-P-3000C
        • Removing and installing trim surround on glass roof - AR88.85-P-3001C
      • Repair & Adjustments
        • Removal and installation of front fenders - RA88001290100X(88-100)
        • Removal and installation of inner fender in front fender - RA88001290130X(88-130)
        • Removal and installation of inner fender in rear fender - RA88001290140X(88-140)
        • Removal and installation of front bumper - RA88001290200X(88-200)
        • Removal and installation of rear bumper - RA88001290220X(88-220)
        • Removal and installation of engine hood - RA88001290300X(88-300)
        • Adjustment of engine hood - RA88001290302X(88-302)
        • Removal and installation of engine hood hinges - RA88001290306X(88-306)
        • Removal and installation of control cable for engine hood - RA88001290310X(88-310)
        • Removal and installation of radiator grille - RA88001290400X(88-400)
        • Removal and installation of trunk lid - RA88001290500X(88-500)
        • Removal and installation of push button lock, trunk lid lock and locking eye - RA88001290502X(88-502)
        • Attaching type rating plate to trunk lid - RA88001290505X(88-505)
        • Removal and installation of hinge lever on trunk lid and top compartment cover - RA88001290512X(88-512)
        • Removal and installation of top compartment cover - RA88001290600X(88-600)
        • Renewal of covering on top compartment cover - RA88001290610X(88-610)
        • Removal and installation of tank flap - RA88001290700X(88-700)
        • Removal and installation of panelings on doors and fenders - RA88001290810X(88-810)
        • Removal and installation of panelling on main frame member - RA88001290830X(88-830)
        • Removal and installation of panelling on front pillar - RA88001290850X(88-850)
        • Removal and installation of outside mirror - RA88001290905X(88-905)
        • Replacement of covering on roll bar - RA88001290930X(88-930)
    • Interior Equipment -- 129 Chassis
      • Basic Knowledge
        • Garage door opener, function - GF68.05-P-0001A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Interior equipment - AR68.00-Z-9129AA
        • Removing, installing garage door opener - AR68.05-P-2000C
        • Cutting out switch openings in cover - AR68.20-P-2030C
          • Notes
          • Milling switch opening - AR68.20-P-2030-01C
        • Removing and installing paneling on glass roof - AR68.30-P-4370C
        • Removing and installing sun shade on glass roof - AR68.50-P-0200C
      • Repair & Adjustments
        • Removal and installation of instrument panel - RA68001290100X(68-100)
        • Removal and installation of loudspeaker covers, left and right - RA68001290105X(68-105)
        • Removal and installation of side air nozzles - RA68001290110X(68-110)
        • Removal and installation of center air nozzle - RA68001290115X(68-115)
        • Removal and installation of glove compartment cover - RA68001290120X(68-120)
        • Removal and installation of lock cylinder for glove compartment - RA68001290125X(68-125)
        • Removal and installation of lock on glove compartment - RA68001290130X(68-130)
        • Removal and installation of glove compartment - RA68001290140X(68-140)
        • Removal and installation of cover below instrument panel - RA68001290150X(68-150)
          • A. Cover on driver's side
          • B. Cover on passenger's side
          • A. Driver's side
          • B. Passenger side
        • Removal and installation of compartment for spectacles - RA68001290155X(68-155)
        • Removal and installation of center console - RA68001290200X(68-200)
        • Removal and installation of cover for compartment in center console - RA68001290210X(68-210)
        • Removal and installation of cassette compartment and ashtray housing - RA68001290220X(68-220)
        • Removal and installation of gear shift lever cover - RA68001290230X(68-230)
        • Removal and installation of armrest - RA68001290240X(68-240)
        • Removal and installation of window molding on side of windshield - RA68001290400X(68-400)
        • Removal and installation of molding above windshield - RA68001290410X(68-410)
        • Removal and installation of window molding on coupe roof, side and rear - RA68001290420X(68-420)
        • Removal and installation of window molding at top of windshield - RA68001290425X(68-425)
        • Removal and installation of headliner on coupe roof - RA68001290430X(68-430)
        • Removal and installation of rear side wall - RA68001290455X(68-455)
        • Removal and installation of luggage shelf - RA68001290472X(68-472)
        • Removal and installation of ornamental frame for rear window on coupe roof - RA68001290560X(68-560)
        • Removal and installation of ornamental frame for side window on coupe roof - RA68001290570X(68-570)
  • Interior/Illumination Lights
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
  • Mirrors
    • Detachable Body Components -- 129 Chassis
      • General Information
        • General information on repair to detachable plastic components - AH88.00-P-1000-01A
      • Testing & Repair
        • Repairing plastic detachable body components - AR88.00-P-1000A
          • Notes
          • Using plastic repair box - AR88.00-P-1000-01A
        • Testing and repair work: Passenger cars: Detachable body components, exterior flaps - AR88.00-Z-9129AA
        • Removing and installing trunk lid remote control - AR88.50-P-5035C
        • Removing and installing pneumatic element for putting up trunk lid - AR88.50-P-5037C
        • Removing and installing remote trunk lid release switch - AR88.50-P-5040C
        • Removing and installing molding on side window - AR88.85-P-3000C
        • Removing and installing trim surround on glass roof - AR88.85-P-3001C
      • Repair & Adjustments
        • Removal and installation of front fenders - RA88001290100X(88-100)
        • Removal and installation of inner fender in front fender - RA88001290130X(88-130)
        • Removal and installation of inner fender in rear fender - RA88001290140X(88-140)
        • Removal and installation of front bumper - RA88001290200X(88-200)
        • Removal and installation of rear bumper - RA88001290220X(88-220)
        • Removal and installation of engine hood - RA88001290300X(88-300)
        • Adjustment of engine hood - RA88001290302X(88-302)
        • Removal and installation of engine hood hinges - RA88001290306X(88-306)
        • Removal and installation of control cable for engine hood - RA88001290310X(88-310)
        • Removal and installation of radiator grille - RA88001290400X(88-400)
        • Removal and installation of trunk lid - RA88001290500X(88-500)
        • Removal and installation of push button lock, trunk lid lock and locking eye - RA88001290502X(88-502)
        • Attaching type rating plate to trunk lid - RA88001290505X(88-505)
        • Removal and installation of hinge lever on trunk lid and top compartment cover - RA88001290512X(88-512)
        • Removal and installation of top compartment cover - RA88001290600X(88-600)
        • Renewal of covering on top compartment cover - RA88001290610X(88-610)
        • Removal and installation of tank flap - RA88001290700X(88-700)
        • Removal and installation of panelings on doors and fenders - RA88001290810X(88-810)
        • Removal and installation of panelling on main frame member - RA88001290830X(88-830)
        • Removal and installation of panelling on front pillar - RA88001290850X(88-850)
        • Removal and installation of outside mirror - RA88001290905X(88-905)
        • Replacement of covering on roll bar - RA88001290930X(88-930)
    • Interior Equipment -- 129 Chassis
      • Basic Knowledge
        • Garage door opener, function - GF68.05-P-0001A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Interior equipment - AR68.00-Z-9129AA
        • Removing, installing garage door opener - AR68.05-P-2000C
        • Cutting out switch openings in cover - AR68.20-P-2030C
          • Notes
          • Milling switch opening - AR68.20-P-2030-01C
        • Removing and installing paneling on glass roof - AR68.30-P-4370C
        • Removing and installing sun shade on glass roof - AR68.50-P-0200C
      • Repair & Adjustments
        • Removal and installation of instrument panel - RA68001290100X(68-100)
        • Removal and installation of loudspeaker covers, left and right - RA68001290105X(68-105)
        • Removal and installation of side air nozzles - RA68001290110X(68-110)
        • Removal and installation of center air nozzle - RA68001290115X(68-115)
        • Removal and installation of glove compartment cover - RA68001290120X(68-120)
        • Removal and installation of lock cylinder for glove compartment - RA68001290125X(68-125)
        • Removal and installation of lock on glove compartment - RA68001290130X(68-130)
        • Removal and installation of glove compartment - RA68001290140X(68-140)
        • Removal and installation of cover below instrument panel - RA68001290150X(68-150)
          • A. Cover on driver's side
          • B. Cover on passenger's side
          • A. Driver's side
          • B. Passenger side
        • Removal and installation of compartment for spectacles - RA68001290155X(68-155)
        • Removal and installation of center console - RA68001290200X(68-200)
        • Removal and installation of cover for compartment in center console - RA68001290210X(68-210)
        • Removal and installation of cassette compartment and ashtray housing - RA68001290220X(68-220)
        • Removal and installation of gear shift lever cover - RA68001290230X(68-230)
        • Removal and installation of armrest - RA68001290240X(68-240)
        • Removal and installation of window molding on side of windshield - RA68001290400X(68-400)
        • Removal and installation of molding above windshield - RA68001290410X(68-410)
        • Removal and installation of window molding on coupe roof, side and rear - RA68001290420X(68-420)
        • Removal and installation of window molding at top of windshield - RA68001290425X(68-425)
        • Removal and installation of headliner on coupe roof - RA68001290430X(68-430)
        • Removal and installation of rear side wall - RA68001290455X(68-455)
        • Removal and installation of luggage shelf - RA68001290472X(68-472)
        • Removal and installation of ornamental frame for rear window on coupe roof - RA68001290560X(68-560)
        • Removal and installation of ornamental frame for side window on coupe roof - RA68001290570X(68-570)
    • Power Mirrors
      • Description & Operation
      • System Tests
      • Removal & Installation
        • Notes
        • Outside Mirror
          • Removal & Installation
        • Outside Mirror Glass
          • Removal & Installation
        • Outside Mirror Motor
          • Removal & Installation
      • Wiring Diagrams
  • Seats
    • Power Seats
      • Description & Operation
      • Programming
        • Memory Seats
        • Enabling Code Function For Radio
        • Reactivating Steering Angle Sensor
      • Removal & Installation
        • Notes
        • Backrest Motor
          • Notes
          • Removal & Installation
        • Backrest Cushion
          • Removal & Installation
        • Forward/Rearward Motor
          • Removal & Installation
        • Front Height Motor
          • Removal & Installation
        • Front Seat
          • Removal & Installation
        • Front Seat Cushion
          • Removal & Installation
        • Headrest Motor
          • Notes
          • Removal & Installation
        • Rear Height Motor
          • Removal & Installation
      • Wiring Diagrams
    • Seats, Restraint Systems -- 129 Chassis
      • General Information
        • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002
          • Important instructions for performing repair, body and welding work on vehicles with airbags and emergency tensioning retractors - AH91.00-P-0002-01A
          • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002-01B
        • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006
          • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006-01A
          • Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B
      • User Information
        • Confirmation for deactivation of airbag - OV91.60-P-0001-01A
      • Basic Knowledge
        • Electric seat adjustment (ESA), function - GF91.29-P-0004AA
        • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02A
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02B
        • Front emergency tensioning retractor, function - GF91.40-P-4000
          • Front emergency tensioning retractor, design - GF91.40-P-4000-02A
          • Front emergency tensioning retractor, function - GF91.40-P-4000-03A
        • Triggering mechanism of supplemental restraint system (SRS) - GF91.60-P-0002-08F
      • Safety Precautions
        • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001
          • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01A
          • Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Seats, bunks, restraint systems - AR91.00-Z-9129AA
        • Removing and installing control valve for multi-contour seat - AR91.25-P-1710C
        • Removing and installing air cushions in multi-contour backrest - AR91.25-P-1740C
        • Removing and installing multi-contour seat air cushions - AR91.25-P-1770C
        • Removing and installing drive for horizontal seat adjustment - AR91.29-P-1300A
        • Removing and installing drive for seat height adjustment - AR91.29-P-1421
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421A
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421B
        • Removing and installing front seat backrest motor - AR91.29-P-1431A
        • Removing and installing front seat head restraint motor - AR91.29-P-1432A
        • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001G
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001H
        • Reactivating passenger airbag after deactivation - AR91.60-P-0002
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002G
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002H
        • Removing and installing front passenger seat occupied recognition sensor - AR91.60-P-0720C
      • Repair & Adjustments
        • (91-830)
          • Testing function of roll-over bar - RA91001240830X(91-830)
          • Testing roll-over bar for proper function - RA91001290830X(91-830)
        • (91-860)
          • Removal and installation of left and right rear axle switches - RA91001240860X(91-860)
          • Removing and installing left and right rear axle switches up to 05/95 - RA91001290860X(91-860)
        • Function description, front seats - RA91001290010X(91-010)
        • Removing and installing front seat head restraints - RA91001290052X(91-052)
        • Removing and installing adjustment mechanism for head restraint and upper belt guide fitting - RA91001290053X(91-053)
        • Removing and installing front seat cushion and backrest cushion - RA91001290055X(91-055)
        • Converting mount at front of front seat cushion - RA91001290057X(91-057)
        • Removing and installing covering on side of backrest frame - RA91001290060X(91-060)
        • Removing and installing covering on rear of front seat backrest - RA91001290065X(91-065)
        • Removing and installing side covering on outside of seat cushion frame - RA91001290070X(91-070)
        • Removing and installing cover on upper belt guide fitting - RA91001290075X(91-075)
        • Removing and installing front seat - RA91001290100X(91-100)
        • Removing and installing seat rail - RA91001290120X(91-120)
        • Removing and installing gear with spindle for forward/backward seat adjustment mechanism - RA91001290122X(91-122)
        • Removing and installing gear for seat height adjustment, front - RA91001290123X(91-123)
        • Removing and installing gear for seat height adjustment, rear - RA91001290124X(91-124)
        • Removing and installing gear for backrest adjustment - RA91001290125X(91-125)
        • Removing and installing backrest lock on front seat - RA91001290130X(91-130)
        • Repairing damaged female threads on seat frame - RA91001290140X(91-140)
        • Checking front seat frame following accident - RA91001290151X(91-151)
        • Removing and installing control cables for backrest lock - RA91001290155X(91-155)
        • Removing and installing cover on front seat cushion - RA91001290180X(91-180)
        • Removing and installing cover on front seat backrest cushion - RA91001290182X(91-182)
        • Removing and installing rear seat - RA91001290200X(91-200)
        • Removing and installing emergency tensioning retractors - RA91001290502X(91-502)
        • Seat belt replacement regulations - RA91001290550X(91-550)
        • Removing and installing ETR control module or ETR with airbag control module - RA91001290622X(91-622)
        • Instructions for replacing seat belts - RA91001290625X(91-625)
        • Removing and installing emergency tensioning retractor (ETR) - RA91001290630X(91-630)
        • Removing and installing airbag unit in steering wheel - RA91001290660X(91-660)
        • Removing and installing side airbag unit - RA91001290690X(91-690)
        • Removing and installing side airbag sensor - RA91001290710X(91-710)
        • Function description of roll-over bar - RA91001290800X(91-800)
        • Safety regulations for roll-over bars - RA91001290820X(91-820)
        • Removing and installing roll-over bar crash actuated trigger module up to 05/95 - RA91001290840X(91-840)
        • Removing and installing soft top control module - RA91001290841X(91-841)
        • Removing and installing roll-over bar convenience switch - RA91001290880X(91-880)
        • Removing and installing roll-over bar - RA91001290900X(91-900)
        • Adjusting roll-over bar - RA91001290920X(91-920)
        • Description of operation of airbag with ETR and side airbag - RA9100129A600X(91-600)
        • Safety precautions for airbag, side airbag and emergency tensioning retractor - RA9100129A610X(91-610)
          • Notes
          • A: General
          • B. Shipping airbag, side airbag and emergency tensioning retractor units
          • C. Storing airbag, side airbag and emergency tensioning retractor units
          • D. Installation and removal of airbag, side airbag and emergency tensioning retractor units
          • E. Rendering airbag, side airbag and ETR units unusable
          • F. Disposing of faulty components of restraint system
          • G. Important instructions for performing repair, body and welding work
        • Removing, installing passenger airbag unit - RA9100129A680X(91-680)
          • Passenger airbag unit (up to approx. 08/95)
          • B. Passenger airbag unit (as of approx. 09/95)
        • Technical modifications, group 91 - RA9100129TA00X
        • Technical modifications, group 91 - RA9100129TA01X
      • Component Modifications
        • Discontinuation of control module and rear axle switch (roll bar) - BT91.59-P-0001-01A
  • Steering Column Switches
    • Steering -- 129 Chassis
      • General Information
        • Evaluating steering rack when repairing accident vehicles - AH46.20-P-9409-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Steering - AR46.00-Z-9129AA
        • Removing and installing steering wheel - AR46.10-P-0100
          • Removing and installing steering wheel - AR46.10-P-0100A
            • Notes
            • Installation of replacement steering wheel - AR46.10-P-0100-01A
          • Removing and installing steering wheel - AR46.10-P-0100B
        • Removing and installing spring contact - AR46.10-P-0200A
          • Notes
          • Set the clock spring contact to center position - AR46.10-P-0200-01A
        • Removing and installing steering angle sensor - AR46.10-P-0300
          • Removing and installing steering angle sensor - AR46.10-P-0300A
            • Notes
            • Activating steering angle sensor - AR46.10-P-0300-01A
          • Removing and installing steering angle sensor - AR46.10-P-0300B
        • Removing and installing jacket tube - AR46.10-P-0400A
        • Dismantling and assembling rigid jacket tube - AR46.10-P-0500A
          • Notes
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01C
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01E
          • Dismantling and assembling inner jacket tube - AR46.10-P-0500-02C
        • Dismantling and assembling electrically adjustable jacket tube - AR46.10-P-0600A
          • Notes
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01A
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01B
          • Removing and installing lower bracket for jacket tube - AR46.10-P-0600-02A
          • Removing and installing motor for longitudinal steering column adjustment - AR46.10-P-0600-03A
          • Removing and installing jacket tube pressure element - AR46.10-P-0600-04A
        • Removing and installing lock cylinder - AR46.10-P-0800
          • Removing and installing lock cylinder - AR46.10-P-0800A
          • Removing and installing lock cylinder - AR46.10-P-0800C
        • Removing and installing steering lock - AR46.10-P-0900A
          • Notes
          • Unlock steering lock - AR46.10-P-0900-01A
        • Adjusting steering gear in vehicle - AR46.20-P-0100A
          • Notes
          • Adjusting friction torque of steering gear - AR46.20-P-0100-01A
        • Replacing sealing ring in lower steering gear cover - AR46.20-P-0200A
        • Removing and installing steering gear - AR46.20-P-0500B
          • Notes
          • Placing steering gear in center position - AR46.20-P-0500-01A
        • Fill power steering pump and bleed - AR46.30-P-0010
          • Fill power steering pump and bleed - AR46.30-P-0010A
          • Fill power steering pump and bleed - AR46.30-P-0010B
        • Checking oil pressure of power steering pump - AR46.30-P-0100
          • Checking oil pressure in power steering pump - AR46.30-P-0100A
          • Checking oil pressure of power steering pump - AR46.30-P-0100GH
        • Removing and installing power steering pump - AR46.30-P-0500
          • Removing and installing power steering pump - AR46.30-P-0500A
          • Removing and installing power steering pump - AR46.30-P-0500B
        • Remove/install drag link - AR46.40-P-0100A
        • Removing and installing tie rod - AR46.40-P-0200A
        • Remove/install steering idler arm, replacing plain rubber mount - AR46.40-P-0300A
      • Maintenance
        • Check and correct power steering fluid level - AP46.00-P-4611
          • Checking and adjusting oil level in power steering - AP46.00-P-4611BA
          • Check and correct power steering fluid level - AP46.00-P-4611BB
        • Inspect play of track rod and drag link joints, inspect rubber boots - AP46.00-P-4653BA
        • Check tie rod and center link for play - AP46.40-P-4650-01BA
      • Repair & Adjustments
        • Adjusting steering gear in vehicle - RA46001243230X(46-3230)
        • Removing and installing drag link - RA46001246177X(46-6177)
        • Removing and installing tie rod - RA46001247007X(46-7007)
        • Removing and installing contact spiral - RA46001248300X(46-8300)
        • Removal and installation of steering wheel - RA46001260610X(46-610)
        • Steering gear survey - RA4600FBL0001X(46-0001)
          • Steering gear survey - RA4600FBL0001X(46-0001)
          • Survey of steering gears - RA46097650001X(46-0001)
        • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Survey of power steering pumps (LHP)/tandem pumps (TANP) - RA46097650002X(46-0002)
        • Steering wheel survey - RA4600FBL0003X(46-0003)
        • General - RA4600FBL0005X(46-0005)
        • Functional survey - RA4600FBL0006X(46-0006)
        • Design and function of steering gear - RA4600FBL0010X(46-0010)
        • Design and function of electrical components in PARAMETER STEERING - RA4600FBL0020X(46-0020)
        • Design and function of power steering pump - RA4600FBL0050X(46-0050)
        • Design and function of tandem pump - RA4600FBL0060X(46-0060)
        • Function of electrically adjustable jacket tube - RA4600FBL0615X(46-0615)
        • Function of manually adjustable jacket tube - RA4600FBL0616X(46-0616)
        • Function of contact spiral between steering column tube and steering wheel - RA4600FBL0617X(46-0617)
        • Checking and adjusting friction torque of steering gear - RA46097650120X(46-0120)
        • Replacing steering gear when performing repairs to vehicle involved in accident - RA46097650140X(46-0140)
        • Removing and installing parameter steering (PML) P-valve (Y10) - RA46097650231X(46-0231)
        • Removing, installing and checking bearing cover with pitman arm shaft - RA46097650232X(46-0232)
        • Disassembling and assembling pitman arm shaft/bearing cover - RA46097650233X(46-0233)
        • Removing and installing adjusting screw - RA46097650234X(46-0234)
        • Removing, installing and checking play compensator - RA46097650235X(46 - 0235)
        • Removing and installing steering shaft/bearing cover, replacing radial seal ring - RA46097650236X(46-0236)
        • Removing, installing and checking control valve - RA46097650238X(46 - 0238)
        • Filling and bleeding the power steering pump/tandem pump - RA46097650715X(46-0715)
        • Technical modifications -steering gear 765.9 Models 124, 129, 140, 201, 202 and power steering pumps - RA4609765TA00X
        • Disassembling and assembling power steering pump/tandem pump - RA46A97650730X(46-0730)
        • Tandem pump models 67, 167 - RA46C97650730X(C.)
      • Component Modifications
        • 2nd version of steering lock - BT46.10-P-0001-01A
        • 3rd version of steering lock - BT46.10-P-0002-01A
        • 4th version of steering lock - BT46.10-P-0003-01A
        • 5th version of steering lock - BT46.10-P-0004-01A
  • Window Motors & Regulators
    • Doors & Windows -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Doors - AR72.00-Z-9129AA
        • Removing and installing door liner on front door - AR72.10-P-1000A
        • Removing and installing power window motor in front door - AR72.29-P-1860A
      • Repair & Adjustments
        • Removal, installation and adjustment of driver's door - RA72001290050X(72-050)
        • Removal and installation of door liner - RA72001290100X(72-100)
        • Disassembly and assembly of door liner - RA72001290103X(72-103)
        • Removal and installation of inner rail - RA72001290160X(72-160)
        • Removal and installation of outer rail - RA72001290170X(72-170)
        • Removal and installation of window lift - RA72001290181X(72-181)
        • Removal and installation of crank window - RA72001290190X(72-190)
        • Adjustment of crank windows - RA72001290195X(72-195)
        • Removal and installation of window guide, front - RA72001290200X(72-200)
        • Removal and installation of door holder - RA72001290210X(72-210)
        • Removal and installation of door sealing frame - RA72001290220X(72-220)
        • Removal and installation of inside door control - RA72001290230X(72-230)
        • Removal and installation of outside door handle - RA72001290240X(72-240)
        • Removal and installation of door lock - RA72001290250X(72-250)
        • Removal and installation of striker eye - RA72001290260X(72-260)
    • Windows -- 129 Chassis
      • Safety Precautions
        • Risk of injury caused by slipping when clamping blade in the multicutter and by glass splinters when cutting out bonded windows - AS67.00-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Windows - AR67.00-Z-9129AA
        • Remove/install windshield - AR67.10-P-1000C
          • Notes
          • Cutting out windshield with cutting blades - AR67.10-P-1000-01C
          • Prepare window for installation - AR67.10-P-1000-03P
          • Aligning windshield in body opening - AR67.10-P-1000-04C
          • Preparing glue cartridge - AR67.10-P-1000-07K
          • Prepare glue cartridge - AR67.10-P-1000-07P
          • Apply adhesive material - AR67.10-P-1000-08P
        • Install windshield - AR67.10-P-1503
          • Prepare body flange for installation of window - AR67.10-P-1501-01CA
          • Prepare body flange for installation of window - AR67.10-P-1501-01P
          • Install windshield - AR67.10-P-1503-01C
        • Remove/install rear window - AR67.20-P-2000
          • Remove/install rear window - AR67.20-P-2000C
            • Notes
            • Cutting out rear window with cutter - AR67.20-P-2000-02C
            • Aligning rear window in body opening - AR67.20-P-2000-04C
            • Install rear window - AR67.20-P-2000-05C
          • Remove/install rear window - AR67.20-P-2000CA
            • Notes
            • Replacing rubber spacers - AR67.20-P-2000-03C
            • Aligning rear window in body opening - AR67.20-P-2000-04CA
        • Remove/install side window - AR67.30-P-2305C
          • Notes
          • Inserting side window - AR67.30-P-2305-03C
        • Cutting out side window with cutting blade - AR67.30-P-4050-01C
  • Wiper/Washer Systems
    • Electrical System - Body -- 129 Chassis
      • General Information
        • Notes on fiber optic cable - AH82.70-P-0001-02A
      • Basic Knowledge
        • Digital data bus (D2B), function - GF82.00-P-0001A
        • Data transfer, function - GF82.00-P-2000A
        • Wake-up, function - GF82.00-P-2001A
        • Fiber optic cable, location/function - GF82.00-P-4000
          • Fiber optic cable, location - GF82.00-P-4000-01D
          • Fiber optic cable, function - GF82.00-P-4000-04A
        • Headlamp range control (HRC), function - GF82.10-P-0001A
          • Notes
          • Headlamp range adjustment (HRA), location of components - GF82.10-P-0001-01C
        • Electrical system - xenon headlamps, location of components - GF82.10-P-0002-01A
        • Xenon headlamp, location/function - GF82.10-P-2001A
        • Rain sensor, location/purpose/design/function - GF82.30-P-4103F
        • Emergency call (E-CALL), function - GF82.95-P-0003A
          • Notes
          • Emergency call (E-call), location of components - GF82.95-P-0003-01AA
          • Emergency call (E-call) system, block diagram - GF82.95-P-0003-02A
        • Location finding, function - GF82.95-P-3000B
      • Safety Precautions
        • Risk of death, Risk of explosion/Risk of fire, Risk of injury & Risk of poisoning - AS82.10-Z-0001-01A
        • Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. - AS82.30-Z-0001-01A
      • Self-Diagnostic System
        • TELE AID emergency call system control module version coding - AD82.95-P-2000-05A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
        • Removing and installing bulbs of headlamp unit - AR82.10-P-1201
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201A
          • Remove/install bulbs of headlamp unit - AR82.10-P-1201D
          • Removing and installing bulbs of headlamp unit - AR82.10-P-1201E
        • Remove/install lamp unit lens - AR82.10-P-1820
          • Remove/install lamp unit lens - AR82.10-P-1820A
          • Remove/install lamp unit lens - AR82.10-P-1820B
        • Removing and installing lens for fog lamp - AR82.10-P-1821
          • Removing and installing lens for fog lamp - AR82.10-P-1821A
          • Removing and installing fog lamp lens - AR82.10-P-1821C
        • Removing and installing bulb for fog lamp - AR82.10-P-1825A
        • Removing and installing fog lamp reflector - AR82.10-P-1830A
        • Removing and installing headlamp reflector - AR82.10-P-2850
          • Removing and installing headlamp reflector - AR82.10-P-2850A
          • Remove/install headlamp reflector - AR82.10-P-2850B
        • Checking pneumatic headlamp range adjustment - AR82.10-P-4011A
          • Notes
          • Checking vacuum system of headlamp range adjustment - AR82.10-P-4011-01A
        • Checking positioning element travel - AR82.10-P-4012-02A
        • Removing and installing headlamp range adjustment control module - AR82.10-P-4081
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081A
          • Removing and installing headlamp range adjustment control module - AR82.10-P-4081B
        • Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
        • Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
        • Removing and installing rear axle headlamp range adjustment sensor - AR82.10-P-4084B
        • Removing and installing actuator in headlamp unit - AR82.10-P-4301A
        • Remove/install control unit with ignition unit (xenon headlamps) - AR82.10-P-4631C
        • Removing and installing headlamp unit - AR82.10-P-4730
          • Removing and installing headlamp unit - AR82.10-P-4730A
          • Remove/install lamp unit - AR82.10-P-4730B
        • Removing and installing tail lamp - AR82.10-P-4905EA
        • Removing and installing fog lamp - AR82.10-P-5103G
        • Removing and installing license plate lamp - AR82.10-P-5161EA
        • Removing and installing center high-mounted stop lamp - AR82.10-P-5375
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375A
          • Removing and installing center high-mounted stop lamp - AR82.10-P-5375B
        • Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A
        • Removing and installing headlamp wiper motor - AR82.15-P-5500A
        • Removing and installing front dome lamp - AR82.20-P-0110A
        • Removing and installing bulb for ashtray illumination - AR82.20-P-0130A
        • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
          • Removing and installing bulb of front turn signal lamp - AR82.25-P-1202EA
        • Removing and installing rubber of wiper blade - AR82.30-P-6250E
        • Adjusting wiper system - AR82.30-P-6400-01A
        • Removing and installing wiper motor - AR82.30-P-6800B
          • Notes
          • Basic setting of wiper gear head - AR82.30-P-6800-02E
        • Removing and installing wiper linkage - AR82.30-P-7600A
        • Remove/install rain sensor - AR82.30-P-7700F
        • Removing and installing radio - AR82.60-P-7502
          • Removing and installing radio - AR82.60-P-7502A
            • Notes
            • Coding radio - AR82.60-P-7502-01C
          • Remove/install radio - AR82.60-P-7502EA
            • Notes
            • Coding radio - AR82.60-P-7502-01A
          • Removing and installing radio - AR82.60-P-7502EB
            • Notes
            • Enter radio code - AR82.60-P-7502-01M
        • Removing and installing navigation processor (APS) - AR82.61-P-7410
          • Removing and installing navigation processor (APS) - AR82.61-P-7410F
          • Removing and installing navigation processor (APS) - AR82.61-P-7410G
        • Removing and installing APS radio and navigation operating unit - AR82.61-P-7412B
        • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474D
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474E
          • Removing and installing antenna for global positioning system (GPS) on vehicles with APS - AR82.61-P-7474F
        • Removing and installing traffic data memory - AR82.61-P-7483A
        • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720A
          • Removing and installing loudspeaker amplifier control module - AR82.62-P-7720C
        • Removing and installing receiver/amplifier control module - AR82.62-P-7721A
        • Removing and installing loudspeakers in instrument panel - AR82.62-P-7833B
        • Removing and installing loudspeaker in side paneling (rear) - AR82.62-P-7837A
        • Removing and installing bass speaker - AR82.62-P-7839A
        • Removing and installing loudspeakers in front doors - AR82.62-P-7845A
        • Removing and installing automatic antenna - AR82.62-P-8105
          • Removing and installing automatic antenna - AR82.62-P-8105A
          • Removing and installing automatic antenna - AR82.62-P-8105EA
        • Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
        • Removing and installing RF antenna lead - AR82.62-P-8221A
        • Removing and installing CD player with changer - AR82.64-P-7507D
        • Removing, installing fiber optic cable - AR82.70-P-0004D
          • Notes
          • Remove, install fiber optic cable module - AR82.70-P-0004-01A
        • Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010AA
        • Removing and installing cellular telephone interface - AR82.70-P-7379EEE
        • Removing and installing transmitter/receiver - AR82.70-P-8911
          • Removing and installing CTEL transmitter and receiver - AR82.70-P-8911B
          • Removing and installing transmitter/receiver - AR82.70-P-8911BB
          • Removing and installing transmitter-receiver unit - AR82.70-P-8911Z
        • Removing and installing handset in stowage compartment armrest - AR82.70-P-8914A
        • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915C
          • Removing and installing handset in armrest or stowage compartment - AR82.70-P-8915CC
        • Removing and installing handset on center console - AR82.70-P-8916AA
        • Removing and installing bracket/cradle for cellular telephone - AR82.70-P-8918
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918D
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918DD
          • Removing and installing cradle for cellular telephone - AR82.70-P-8918F
          • Removing and installing bracket for cellular telephone - AR82.70-P-8918FF
        • Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920D
        • Removing and installing antenna - AR82.70-P-8951Z
        • Removing and installing hands-free system speaker - AR82.70-P-8968A
        • Removing and installing hands-free system microphone - AR82.70-P-8969Z
        • Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C
          • Notes
          • Cover fiber optic cable - AR82.95-P-0005-01A
        • Removing and installing emergency call system control module - AR82.95-P-0008
          • Removing and installing emergency call system control module - AR82.95-P-0008F
          • Removing and installing emergency call system control module - AR82.95-P-0008H
        • Authorization for TELE AID - AR82.95-P-0011
          • Authorization for TELE AID - AR82.95-P-0011A
          • Carry out authorization for TELE AID - AR82.95-P-0011B
      • Maintenance
        • Check and correct headlamp adjustment - AP82.10-P-8260A
          • Notes
          • Set low beam - AP82.10-P-8260-01A
          • Adjusting low beam - AP82.10-P-8260-01B
          • Check setting of high beam - AP82.10-P-8260-02A
          • Set or inspect fog lamps - AP82.10-P-8260-04A
      • Retrofitting & Conversion
        • Activating unit code for APS - AN82.61-P-1000-01A
      • Component Modifications
        • MB radio - BT82.60-P-9309-01C
        • Modified bracket for transmitter-receiver unit/telephone handset - BT82.70-P-9403
          • Modified bracket for transmitter-receiver unit - BT82.70-P-9403-02A
          • Modified telephone handset - BT82.70-P-9403-03A
• Body & Frame
  • Door Locks
    • Anti-Theft & Central Locking System -- 129 Chassis
      • Basic Knowledge
        • Infrared remote control for central locking with drive authorization system stage X, function - GF80.30-P-0002A
          • Notes
          • Infrared remote control for central locking with drive authorization system stage X, location of components - GF80.30-P-0002-01A
        • Function of drive authorization system stage X - GF80.30-P-2002A
        • Remote control key with transponder, purpose/design/function - GF80.30-P-4001A
        • Purpose of drive authorization system (DAS) infrared control module - GF80.30-P-4003-01B
        • Transponder, location/purpose/design/function - GF80.30-P-4006A
        • Transponder coil, location/purpose/function - GF80.30-P-4007A
        • Anti-theft alarm (ATA), location of components - GF80.50-P-0001-02D
        • Activating anti-theft alarm, function - GF80.50-P-2002
          • Activating anti-theft alarm, function - GF80.50-P-2002F
          • Activating anti-theft alarm (ATA), function - GF80.50-P-2002H
        • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003F
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003H
        • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004
          • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004F
          • Tripping of anti-theft alarm (ATA), function - GF80.50-P-2004H
      • Testing & Repair
        • Testing and repair work: Passenger cars: Central locking, convenience feature, drive authorization system - AR80.00-Z-9129AA
        • Checking batteries for infrared remote control key - AR80.30-P-4205CA
        • Removing, installing batteries for infrared remote control key - AR80.30-P-4210CA
        • Synchronizing infrared remote control signal - AR80.30-P-4215CA
        • Removing and installing folding key in infrared remote control key - AR80.30-P-4220CA
        • Removing and installing front door infrared remote control receiver - AR80.30-P-4305C
        • Removing and installing infrared remote central locking function indicator for front door - AR80.30-P-4310C
        • Removing and installing trunk lid IR receiver (A26/3) - AR80.30-P-4350C
        • Removing and installing infrared drive authorization system control module - AR80.30-P-4500C
        • Removing and installing transponder coil - AR80.30-P-4515CA
        • Checking remote control key batteries - AR80.35-P-4205G
        • Replacing batteries for remote control key - AR80.35-P-4210G
        • Synchronizing transmission signal of remote control - AR80.35-P-4215G
        • Removing, installing folding key in remote control key - AR80.35-P-4220G
        • Removing and installing control module for radio frequency remote control - AR80.35-P-4500C
        • Removing and installing ATA alarm signal siren - AR80.50-P-9840C
      • Repair & Adjustments
        • Function description of central locking - RA80001290010X(80-010)
        • Checking function of central locking - RA80001290090X(80-090)
        • Checking electrical function of central locking - RA80001290104X(80-104)
        • Checking pneumatic function of the supply pump - RA80001290108X(80-108)
        • Checking electrical function of the actuator - RA80001290112X(80-112)
        • Checking pneumatic function of the actuator - RA80001290116X(80-116)
        • Checking central locking for leaks - RA80001290120X(80-120)
        • Checking pneumatic line for leaks - RA80001290125X(80-125)
        • Removing, installing and checking switchover valve - venting central locking on driver's door Y65/1, and passenger door Y65/2 (vehicles up to 12/93) - RA80001290130X(80-130)
        • Removing and installing actuator (S47, S48, S49) - RA80001290215X(80-215)
        • Removing and installing tank flap element - RA80001290230X(80-230)
        • Removing and installing supply pump (M14/1, M14/2) - RA80001290270X(80-270)
        • Function description of interior central locking - RA80001290300X(80-300)
        • Checking function of interior central locking - RA80001290305X(80-305)
        • Checking electrical function of interior central locking - RA80001290310X(80-310)
        • Removing, installing and checking the interior central locking switch (S85) - RA80001290312X(80-312)
        • Checking interior central locking for leaks - RA80001290320X(80-320)
        • Removing and installing glove box/spectacles compartment element - RA80001290350X(80-350)
        • Removing and installing front door pocket element - RA80001290355X(80-355)
        • Removing and installing rear door pocket element - RA80001290360X(80-360)
        • Removing and installing center stowage compartment element - RA80001290365X(80-365)
        • Removing and installing cassette compartment element - RA80001290370X(80-370)
        • Removing and installing rear luggage compartment element - RA80001290375X(80-375)
        • Function description of infrared remote control - RA80001290400X(80-400)
        • Checking signal from infrared remote control key - RA80001290421X(80-421)
        • Removing and installing infrared remote control module (N54) - RA80001290440X(80-440)
        • Function diagram of central locking - RA80001290900X(80-900)
        • Function diagram of interior central locking - RA80001290910X(80-910)
    • Anti-Theft Systems
      • Description & Operation
      • Programming
        • Anti-Theft Control Module
      • Trouble Shooting
        • Anti-Theft System Inoperative
        • Anti-Theft System Cannot Be Armed With Remote Transmitter
        • Lights & Horn Do Not Operate When Activating Alarm
        • Anti-Theft Indicator Inoperative
        • Anti-Theft System Does Not Trigger When Front Door Is Opened
        • Anti-Theft System Does Not Trigger When Trunk Is Opened
        • Anti-Theft System Does Not Trigger When Hood Is Opened
        • Anti-Theft Horn Inoperative
        • Anti-Theft Lights Inoperative
        • Anti-Theft System Cannot Be Turned Off With Remote Transmitter
        • Anti-Theft System Does Not Trigger When Vehicle Is Towed
      • Function Tests
        • Anti-Theft Status Indicator Light
        • Left Door
          • Activate Anti-Theft System Using Left Door
        • Right Door
          • Activate Anti-Theft System Using Right Door
        • Engine Hood
          • Activate Anti-Theft System Using Hood
        • Trunk Lid
          • Activate Anti-Theft System Using Trunk Lid
        • Anti-Tow Protection
          • Activate Anti-Tow Protection
          • De-Activate Anti-Tow Protection
      • Self-Diagnostic System
        • Retrieving & Clearing Codes
      • System Tests
        • Notes
        • Test Preparation
        • Test 1: Anti-Theft Control Module
        • Test 3.0: Central Locking System "Open" Signal
        • Test 3.1: Central Locking System "Close" Signal
        • Test 6: Door Contact Switches
        • Test 7: Trunk Lid Microswitch
        • Test 8: Engine Hood Switch
        • Test 11: Ignition Switch Alarm Circuit
        • Test 13: Alarm Horn
        • Test 14: Diagnosis Output
        • Test 16: Headlight Alarm Circuit
        • Test 17: Taillight Alarm Circuit
        • Test 19: Anti-Theft Status Indicator Light
        • Test 20: Anti-Tow Protection Switch Activation
        • Test 23: Anti-Tow Protection Sensor
        • Test 24: Anti-Tow Protection Switch Actual Values
      • Removal & Installation
      • Wiring Diagrams
    • Doors & Windows -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Doors - AR72.00-Z-9129AA
        • Removing and installing door liner on front door - AR72.10-P-1000A
        • Removing and installing power window motor in front door - AR72.29-P-1860A
      • Repair & Adjustments
        • Removal, installation and adjustment of driver's door - RA72001290050X(72-050)
        • Removal and installation of door liner - RA72001290100X(72-100)
        • Disassembly and assembly of door liner - RA72001290103X(72-103)
        • Removal and installation of inner rail - RA72001290160X(72-160)
        • Removal and installation of outer rail - RA72001290170X(72-170)
        • Removal and installation of window lift - RA72001290181X(72-181)
        • Removal and installation of crank window - RA72001290190X(72-190)
        • Adjustment of crank windows - RA72001290195X(72-195)
        • Removal and installation of window guide, front - RA72001290200X(72-200)
        • Removal and installation of door holder - RA72001290210X(72-210)
        • Removal and installation of door sealing frame - RA72001290220X(72-220)
        • Removal and installation of inside door control - RA72001290230X(72-230)
        • Removal and installation of outside door handle - RA72001290240X(72-240)
        • Removal and installation of door lock - RA72001290250X(72-250)
        • Removal and installation of striker eye - RA72001290260X(72-260)
  • Exterior Body Panels
    • Body - 129 Chassis
      • Repair & Adjustments
        • Joint gap dimensions on hoods, doors and lids - RA60001290070X(60-070)
        • Mounting modular cross members on Celette straightening bench - RA60001290105X(60-105)
        • Functional description of Celette straightening set 429.300 - RA60001290110X(60-110)
        • Examples for setting up Celette modular cross supports and Celette straightening set 429.300 - RA60001290120X(60-120)
        • Examples of layout prior to placing vehicle on Celette straightening bench - RA60001290130X(60-130)
        • Lifting vehicle onto Celette straightening bench - RA60001290135X(60-135)
        • Mounting frame on straightening bench - RA60001290150X(60-150)
        • Functional description of frame angle set - RA60001290160X(60-160)
        • Safety measures prior to arc welding - RA60001290200X(60-200)
    • Body Noises, Noise Insulation -- 129 Chassis
      • Repair & Adjustments
        • Body noises - General - RA94001290100X(94-100)
    • Detachable Body Components -- 129 Chassis
      • General Information
        • General information on repair to detachable plastic components - AH88.00-P-1000-01A
      • Testing & Repair
        • Repairing plastic detachable body components - AR88.00-P-1000A
          • Notes
          • Using plastic repair box - AR88.00-P-1000-01A
        • Testing and repair work: Passenger cars: Detachable body components, exterior flaps - AR88.00-Z-9129AA
        • Removing and installing trunk lid remote control - AR88.50-P-5035C
        • Removing and installing pneumatic element for putting up trunk lid - AR88.50-P-5037C
        • Removing and installing remote trunk lid release switch - AR88.50-P-5040C
        • Removing and installing molding on side window - AR88.85-P-3000C
        • Removing and installing trim surround on glass roof - AR88.85-P-3001C
      • Repair & Adjustments
        • Removal and installation of front fenders - RA88001290100X(88-100)
        • Removal and installation of inner fender in front fender - RA88001290130X(88-130)
        • Removal and installation of inner fender in rear fender - RA88001290140X(88-140)
        • Removal and installation of front bumper - RA88001290200X(88-200)
        • Removal and installation of rear bumper - RA88001290220X(88-220)
        • Removal and installation of engine hood - RA88001290300X(88-300)
        • Adjustment of engine hood - RA88001290302X(88-302)
        • Removal and installation of engine hood hinges - RA88001290306X(88-306)
        • Removal and installation of control cable for engine hood - RA88001290310X(88-310)
        • Removal and installation of radiator grille - RA88001290400X(88-400)
        • Removal and installation of trunk lid - RA88001290500X(88-500)
        • Removal and installation of push button lock, trunk lid lock and locking eye - RA88001290502X(88-502)
        • Attaching type rating plate to trunk lid - RA88001290505X(88-505)
        • Removal and installation of hinge lever on trunk lid and top compartment cover - RA88001290512X(88-512)
        • Removal and installation of top compartment cover - RA88001290600X(88-600)
        • Renewal of covering on top compartment cover - RA88001290610X(88-610)
        • Removal and installation of tank flap - RA88001290700X(88-700)
        • Removal and installation of panelings on doors and fenders - RA88001290810X(88-810)
        • Removal and installation of panelling on main frame member - RA88001290830X(88-830)
        • Removal and installation of panelling on front pillar - RA88001290850X(88-850)
        • Removal and installation of outside mirror - RA88001290905X(88-905)
        • Replacement of covering on roll bar - RA88001290930X(88-930)
    • Doors & Windows -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Doors - AR72.00-Z-9129AA
        • Removing and installing door liner on front door - AR72.10-P-1000A
        • Removing and installing power window motor in front door - AR72.29-P-1860A
      • Repair & Adjustments
        • Removal, installation and adjustment of driver's door - RA72001290050X(72-050)
        • Removal and installation of door liner - RA72001290100X(72-100)
        • Disassembly and assembly of door liner - RA72001290103X(72-103)
        • Removal and installation of inner rail - RA72001290160X(72-160)
        • Removal and installation of outer rail - RA72001290170X(72-170)
        • Removal and installation of window lift - RA72001290181X(72-181)
        • Removal and installation of crank window - RA72001290190X(72-190)
        • Adjustment of crank windows - RA72001290195X(72-195)
        • Removal and installation of window guide, front - RA72001290200X(72-200)
        • Removal and installation of door holder - RA72001290210X(72-210)
        • Removal and installation of door sealing frame - RA72001290220X(72-220)
        • Removal and installation of inside door control - RA72001290230X(72-230)
        • Removal and installation of outside door handle - RA72001290240X(72-240)
        • Removal and installation of door lock - RA72001290250X(72-250)
        • Removal and installation of striker eye - RA72001290260X(72-260)
    • Substructure -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Substructure - AR61.00-Z-9129AA
        • Detach/attach lower engine compartment paneling - AR61.20-P-1105AB
      • Repair & Adjustments
        • Frame reference drawing - RA61001290050X(61-050)
  • Exterior/Interior Trim
    • Detachable Body Components -- 129 Chassis
      • General Information
        • General information on repair to detachable plastic components - AH88.00-P-1000-01A
      • Testing & Repair
        • Repairing plastic detachable body components - AR88.00-P-1000A
          • Notes
          • Using plastic repair box - AR88.00-P-1000-01A
        • Testing and repair work: Passenger cars: Detachable body components, exterior flaps - AR88.00-Z-9129AA
        • Removing and installing trunk lid remote control - AR88.50-P-5035C
        • Removing and installing pneumatic element for putting up trunk lid - AR88.50-P-5037C
        • Removing and installing remote trunk lid release switch - AR88.50-P-5040C
        • Removing and installing molding on side window - AR88.85-P-3000C
        • Removing and installing trim surround on glass roof - AR88.85-P-3001C
      • Repair & Adjustments
        • Removal and installation of front fenders - RA88001290100X(88-100)
        • Removal and installation of inner fender in front fender - RA88001290130X(88-130)
        • Removal and installation of inner fender in rear fender - RA88001290140X(88-140)
        • Removal and installation of front bumper - RA88001290200X(88-200)
        • Removal and installation of rear bumper - RA88001290220X(88-220)
        • Removal and installation of engine hood - RA88001290300X(88-300)
        • Adjustment of engine hood - RA88001290302X(88-302)
        • Removal and installation of engine hood hinges - RA88001290306X(88-306)
        • Removal and installation of control cable for engine hood - RA88001290310X(88-310)
        • Removal and installation of radiator grille - RA88001290400X(88-400)
        • Removal and installation of trunk lid - RA88001290500X(88-500)
        • Removal and installation of push button lock, trunk lid lock and locking eye - RA88001290502X(88-502)
        • Attaching type rating plate to trunk lid - RA88001290505X(88-505)
        • Removal and installation of hinge lever on trunk lid and top compartment cover - RA88001290512X(88-512)
        • Removal and installation of top compartment cover - RA88001290600X(88-600)
        • Renewal of covering on top compartment cover - RA88001290610X(88-610)
        • Removal and installation of tank flap - RA88001290700X(88-700)
        • Removal and installation of panelings on doors and fenders - RA88001290810X(88-810)
        • Removal and installation of panelling on main frame member - RA88001290830X(88-830)
        • Removal and installation of panelling on front pillar - RA88001290850X(88-850)
        • Removal and installation of outside mirror - RA88001290905X(88-905)
        • Replacement of covering on roll bar - RA88001290930X(88-930)
    • Interior Equipment -- 129 Chassis
      • Basic Knowledge
        • Garage door opener, function - GF68.05-P-0001A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Interior equipment - AR68.00-Z-9129AA
        • Removing, installing garage door opener - AR68.05-P-2000C
        • Cutting out switch openings in cover - AR68.20-P-2030C
          • Notes
          • Milling switch opening - AR68.20-P-2030-01C
        • Removing and installing paneling on glass roof - AR68.30-P-4370C
        • Removing and installing sun shade on glass roof - AR68.50-P-0200C
      • Repair & Adjustments
        • Removal and installation of instrument panel - RA68001290100X(68-100)
        • Removal and installation of loudspeaker covers, left and right - RA68001290105X(68-105)
        • Removal and installation of side air nozzles - RA68001290110X(68-110)
        • Removal and installation of center air nozzle - RA68001290115X(68-115)
        • Removal and installation of glove compartment cover - RA68001290120X(68-120)
        • Removal and installation of lock cylinder for glove compartment - RA68001290125X(68-125)
        • Removal and installation of lock on glove compartment - RA68001290130X(68-130)
        • Removal and installation of glove compartment - RA68001290140X(68-140)
        • Removal and installation of cover below instrument panel - RA68001290150X(68-150)
          • A. Cover on driver's side
          • B. Cover on passenger's side
          • A. Driver's side
          • B. Passenger side
        • Removal and installation of compartment for spectacles - RA68001290155X(68-155)
        • Removal and installation of center console - RA68001290200X(68-200)
        • Removal and installation of cover for compartment in center console - RA68001290210X(68-210)
        • Removal and installation of cassette compartment and ashtray housing - RA68001290220X(68-220)
        • Removal and installation of gear shift lever cover - RA68001290230X(68-230)
        • Removal and installation of armrest - RA68001290240X(68-240)
        • Removal and installation of window molding on side of windshield - RA68001290400X(68-400)
        • Removal and installation of molding above windshield - RA68001290410X(68-410)
        • Removal and installation of window molding on coupe roof, side and rear - RA68001290420X(68-420)
        • Removal and installation of window molding at top of windshield - RA68001290425X(68-425)
        • Removal and installation of headliner on coupe roof - RA68001290430X(68-430)
        • Removal and installation of rear side wall - RA68001290455X(68-455)
        • Removal and installation of luggage shelf - RA68001290472X(68-472)
        • Removal and installation of ornamental frame for rear window on coupe roof - RA68001290560X(68-560)
        • Removal and installation of ornamental frame for side window on coupe roof - RA68001290570X(68-570)
  • Frames, Subframes & Crossmembers
    • Frame, Trailer Operation -- 129 Chassis
      • General Information
        • Notes on installing a trailer coupling - AH31.10-P-1000-02B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Frame, trailer operation - AR31.00-Z-9129AA
        • Removing and installing trailer coupling - AR31.10-P-8000T
    • Substructure -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Substructure - AR61.00-Z-9129AA
        • Detach/attach lower engine compartment paneling - AR61.20-P-1105AB
      • Repair & Adjustments
        • Frame reference drawing - RA61001290050X(61-050)
  • Ignition Switch/Steering Lock
    • Anti-Theft & Central Locking System -- 129 Chassis
      • Basic Knowledge
        • Infrared remote control for central locking with drive authorization system stage X, function - GF80.30-P-0002A
          • Notes
          • Infrared remote control for central locking with drive authorization system stage X, location of components - GF80.30-P-0002-01A
        • Function of drive authorization system stage X - GF80.30-P-2002A
        • Remote control key with transponder, purpose/design/function - GF80.30-P-4001A
        • Purpose of drive authorization system (DAS) infrared control module - GF80.30-P-4003-01B
        • Transponder, location/purpose/design/function - GF80.30-P-4006A
        • Transponder coil, location/purpose/function - GF80.30-P-4007A
        • Anti-theft alarm (ATA), location of components - GF80.50-P-0001-02D
        • Activating anti-theft alarm, function - GF80.50-P-2002
          • Activating anti-theft alarm, function - GF80.50-P-2002F
          • Activating anti-theft alarm (ATA), function - GF80.50-P-2002H
        • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003F
          • Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003H
        • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004
          • Triggering anti-theft alarm (ATA), function - GF80.50-P-2004F
          • Tripping of anti-theft alarm (ATA), function - GF80.50-P-2004H
      • Testing & Repair
        • Testing and repair work: Passenger cars: Central locking, convenience feature, drive authorization system - AR80.00-Z-9129AA
        • Checking batteries for infrared remote control key - AR80.30-P-4205CA
        • Removing, installing batteries for infrared remote control key - AR80.30-P-4210CA
        • Synchronizing infrared remote control signal - AR80.30-P-4215CA
        • Removing and installing folding key in infrared remote control key - AR80.30-P-4220CA
        • Removing and installing front door infrared remote control receiver - AR80.30-P-4305C
        • Removing and installing infrared remote central locking function indicator for front door - AR80.30-P-4310C
        • Removing and installing trunk lid IR receiver (A26/3) - AR80.30-P-4350C
        • Removing and installing infrared drive authorization system control module - AR80.30-P-4500C
        • Removing and installing transponder coil - AR80.30-P-4515CA
        • Checking remote control key batteries - AR80.35-P-4205G
        • Replacing batteries for remote control key - AR80.35-P-4210G
        • Synchronizing transmission signal of remote control - AR80.35-P-4215G
        • Removing, installing folding key in remote control key - AR80.35-P-4220G
        • Removing and installing control module for radio frequency remote control - AR80.35-P-4500C
        • Removing and installing ATA alarm signal siren - AR80.50-P-9840C
      • Repair & Adjustments
        • Function description of central locking - RA80001290010X(80-010)
        • Checking function of central locking - RA80001290090X(80-090)
        • Checking electrical function of central locking - RA80001290104X(80-104)
        • Checking pneumatic function of the supply pump - RA80001290108X(80-108)
        • Checking electrical function of the actuator - RA80001290112X(80-112)
        • Checking pneumatic function of the actuator - RA80001290116X(80-116)
        • Checking central locking for leaks - RA80001290120X(80-120)
        • Checking pneumatic line for leaks - RA80001290125X(80-125)
        • Removing, installing and checking switchover valve - venting central locking on driver's door Y65/1, and passenger door Y65/2 (vehicles up to 12/93) - RA80001290130X(80-130)
        • Removing and installing actuator (S47, S48, S49) - RA80001290215X(80-215)
        • Removing and installing tank flap element - RA80001290230X(80-230)
        • Removing and installing supply pump (M14/1, M14/2) - RA80001290270X(80-270)
        • Function description of interior central locking - RA80001290300X(80-300)
        • Checking function of interior central locking - RA80001290305X(80-305)
        • Checking electrical function of interior central locking - RA80001290310X(80-310)
        • Removing, installing and checking the interior central locking switch (S85) - RA80001290312X(80-312)
        • Checking interior central locking for leaks - RA80001290320X(80-320)
        • Removing and installing glove box/spectacles compartment element - RA80001290350X(80-350)
        • Removing and installing front door pocket element - RA80001290355X(80-355)
        • Removing and installing rear door pocket element - RA80001290360X(80-360)
        • Removing and installing center stowage compartment element - RA80001290365X(80-365)
        • Removing and installing cassette compartment element - RA80001290370X(80-370)
        • Removing and installing rear luggage compartment element - RA80001290375X(80-375)
        • Function description of infrared remote control - RA80001290400X(80-400)
        • Checking signal from infrared remote control key - RA80001290421X(80-421)
        • Removing and installing infrared remote control module (N54) - RA80001290440X(80-440)
        • Function diagram of central locking - RA80001290900X(80-900)
        • Function diagram of interior central locking - RA80001290910X(80-910)
    • Steering -- 129 Chassis
      • General Information
        • Evaluating steering rack when repairing accident vehicles - AH46.20-P-9409-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Steering - AR46.00-Z-9129AA
        • Removing and installing steering wheel - AR46.10-P-0100
          • Removing and installing steering wheel - AR46.10-P-0100A
            • Notes
            • Installation of replacement steering wheel - AR46.10-P-0100-01A
          • Removing and installing steering wheel - AR46.10-P-0100B
        • Removing and installing spring contact - AR46.10-P-0200A
          • Notes
          • Set the clock spring contact to center position - AR46.10-P-0200-01A
        • Removing and installing steering angle sensor - AR46.10-P-0300
          • Removing and installing steering angle sensor - AR46.10-P-0300A
            • Notes
            • Activating steering angle sensor - AR46.10-P-0300-01A
          • Removing and installing steering angle sensor - AR46.10-P-0300B
        • Removing and installing jacket tube - AR46.10-P-0400A
        • Dismantling and assembling rigid jacket tube - AR46.10-P-0500A
          • Notes
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01C
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01E
          • Dismantling and assembling inner jacket tube - AR46.10-P-0500-02C
        • Dismantling and assembling electrically adjustable jacket tube - AR46.10-P-0600A
          • Notes
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01A
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01B
          • Removing and installing lower bracket for jacket tube - AR46.10-P-0600-02A
          • Removing and installing motor for longitudinal steering column adjustment - AR46.10-P-0600-03A
          • Removing and installing jacket tube pressure element - AR46.10-P-0600-04A
        • Removing and installing lock cylinder - AR46.10-P-0800
          • Removing and installing lock cylinder - AR46.10-P-0800A
          • Removing and installing lock cylinder - AR46.10-P-0800C
        • Removing and installing steering lock - AR46.10-P-0900A
          • Notes
          • Unlock steering lock - AR46.10-P-0900-01A
        • Adjusting steering gear in vehicle - AR46.20-P-0100A
          • Notes
          • Adjusting friction torque of steering gear - AR46.20-P-0100-01A
        • Replacing sealing ring in lower steering gear cover - AR46.20-P-0200A
        • Removing and installing steering gear - AR46.20-P-0500B
          • Notes
          • Placing steering gear in center position - AR46.20-P-0500-01A
        • Fill power steering pump and bleed - AR46.30-P-0010
          • Fill power steering pump and bleed - AR46.30-P-0010A
          • Fill power steering pump and bleed - AR46.30-P-0010B
        • Checking oil pressure of power steering pump - AR46.30-P-0100
          • Checking oil pressure in power steering pump - AR46.30-P-0100A
          • Checking oil pressure of power steering pump - AR46.30-P-0100GH
        • Removing and installing power steering pump - AR46.30-P-0500
          • Removing and installing power steering pump - AR46.30-P-0500A
          • Removing and installing power steering pump - AR46.30-P-0500B
        • Remove/install drag link - AR46.40-P-0100A
        • Removing and installing tie rod - AR46.40-P-0200A
        • Remove/install steering idler arm, replacing plain rubber mount - AR46.40-P-0300A
      • Maintenance
        • Check and correct power steering fluid level - AP46.00-P-4611
          • Checking and adjusting oil level in power steering - AP46.00-P-4611BA
          • Check and correct power steering fluid level - AP46.00-P-4611BB
        • Inspect play of track rod and drag link joints, inspect rubber boots - AP46.00-P-4653BA
        • Check tie rod and center link for play - AP46.40-P-4650-01BA
      • Repair & Adjustments
        • Adjusting steering gear in vehicle - RA46001243230X(46-3230)
        • Removing and installing drag link - RA46001246177X(46-6177)
        • Removing and installing tie rod - RA46001247007X(46-7007)
        • Removing and installing contact spiral - RA46001248300X(46-8300)
        • Removal and installation of steering wheel - RA46001260610X(46-610)
        • Steering gear survey - RA4600FBL0001X(46-0001)
          • Steering gear survey - RA4600FBL0001X(46-0001)
          • Survey of steering gears - RA46097650001X(46-0001)
        • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Survey of power steering pumps (LHP)/tandem pumps (TANP) - RA46097650002X(46-0002)
        • Steering wheel survey - RA4600FBL0003X(46-0003)
        • General - RA4600FBL0005X(46-0005)
        • Functional survey - RA4600FBL0006X(46-0006)
        • Design and function of steering gear - RA4600FBL0010X(46-0010)
        • Design and function of electrical components in PARAMETER STEERING - RA4600FBL0020X(46-0020)
        • Design and function of power steering pump - RA4600FBL0050X(46-0050)
        • Design and function of tandem pump - RA4600FBL0060X(46-0060)
        • Function of electrically adjustable jacket tube - RA4600FBL0615X(46-0615)
        • Function of manually adjustable jacket tube - RA4600FBL0616X(46-0616)
        • Function of contact spiral between steering column tube and steering wheel - RA4600FBL0617X(46-0617)
        • Checking and adjusting friction torque of steering gear - RA46097650120X(46-0120)
        • Replacing steering gear when performing repairs to vehicle involved in accident - RA46097650140X(46-0140)
        • Removing and installing parameter steering (PML) P-valve (Y10) - RA46097650231X(46-0231)
        • Removing, installing and checking bearing cover with pitman arm shaft - RA46097650232X(46-0232)
        • Disassembling and assembling pitman arm shaft/bearing cover - RA46097650233X(46-0233)
        • Removing and installing adjusting screw - RA46097650234X(46-0234)
        • Removing, installing and checking play compensator - RA46097650235X(46 - 0235)
        • Removing and installing steering shaft/bearing cover, replacing radial seal ring - RA46097650236X(46-0236)
        • Removing, installing and checking control valve - RA46097650238X(46 - 0238)
        • Filling and bleeding the power steering pump/tandem pump - RA46097650715X(46-0715)
        • Technical modifications -steering gear 765.9 Models 124, 129, 140, 201, 202 and power steering pumps - RA4609765TA00X
        • Disassembling and assembling power steering pump/tandem pump - RA46A97650730X(46-0730)
        • Tandem pump models 67, 167 - RA46C97650730X(C.)
      • Component Modifications
        • 2nd version of steering lock - BT46.10-P-0001-01A
        • 3rd version of steering lock - BT46.10-P-0002-01A
        • 4th version of steering lock - BT46.10-P-0003-01A
        • 5th version of steering lock - BT46.10-P-0004-01A
  • Mirrors
    • Detachable Body Components -- 129 Chassis
      • General Information
        • General information on repair to detachable plastic components - AH88.00-P-1000-01A
      • Testing & Repair
        • Repairing plastic detachable body components - AR88.00-P-1000A
          • Notes
          • Using plastic repair box - AR88.00-P-1000-01A
        • Testing and repair work: Passenger cars: Detachable body components, exterior flaps - AR88.00-Z-9129AA
        • Removing and installing trunk lid remote control - AR88.50-P-5035C
        • Removing and installing pneumatic element for putting up trunk lid - AR88.50-P-5037C
        • Removing and installing remote trunk lid release switch - AR88.50-P-5040C
        • Removing and installing molding on side window - AR88.85-P-3000C
        • Removing and installing trim surround on glass roof - AR88.85-P-3001C
      • Repair & Adjustments
        • Removal and installation of front fenders - RA88001290100X(88-100)
        • Removal and installation of inner fender in front fender - RA88001290130X(88-130)
        • Removal and installation of inner fender in rear fender - RA88001290140X(88-140)
        • Removal and installation of front bumper - RA88001290200X(88-200)
        • Removal and installation of rear bumper - RA88001290220X(88-220)
        • Removal and installation of engine hood - RA88001290300X(88-300)
        • Adjustment of engine hood - RA88001290302X(88-302)
        • Removal and installation of engine hood hinges - RA88001290306X(88-306)
        • Removal and installation of control cable for engine hood - RA88001290310X(88-310)
        • Removal and installation of radiator grille - RA88001290400X(88-400)
        • Removal and installation of trunk lid - RA88001290500X(88-500)
        • Removal and installation of push button lock, trunk lid lock and locking eye - RA88001290502X(88-502)
        • Attaching type rating plate to trunk lid - RA88001290505X(88-505)
        • Removal and installation of hinge lever on trunk lid and top compartment cover - RA88001290512X(88-512)
        • Removal and installation of top compartment cover - RA88001290600X(88-600)
        • Renewal of covering on top compartment cover - RA88001290610X(88-610)
        • Removal and installation of tank flap - RA88001290700X(88-700)
        • Removal and installation of panelings on doors and fenders - RA88001290810X(88-810)
        • Removal and installation of panelling on main frame member - RA88001290830X(88-830)
        • Removal and installation of panelling on front pillar - RA88001290850X(88-850)
        • Removal and installation of outside mirror - RA88001290905X(88-905)
        • Replacement of covering on roll bar - RA88001290930X(88-930)
    • Interior Equipment -- 129 Chassis
      • Basic Knowledge
        • Garage door opener, function - GF68.05-P-0001A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Interior equipment - AR68.00-Z-9129AA
        • Removing, installing garage door opener - AR68.05-P-2000C
        • Cutting out switch openings in cover - AR68.20-P-2030C
          • Notes
          • Milling switch opening - AR68.20-P-2030-01C
        • Removing and installing paneling on glass roof - AR68.30-P-4370C
        • Removing and installing sun shade on glass roof - AR68.50-P-0200C
      • Repair & Adjustments
        • Removal and installation of instrument panel - RA68001290100X(68-100)
        • Removal and installation of loudspeaker covers, left and right - RA68001290105X(68-105)
        • Removal and installation of side air nozzles - RA68001290110X(68-110)
        • Removal and installation of center air nozzle - RA68001290115X(68-115)
        • Removal and installation of glove compartment cover - RA68001290120X(68-120)
        • Removal and installation of lock cylinder for glove compartment - RA68001290125X(68-125)
        • Removal and installation of lock on glove compartment - RA68001290130X(68-130)
        • Removal and installation of glove compartment - RA68001290140X(68-140)
        • Removal and installation of cover below instrument panel - RA68001290150X(68-150)
          • A. Cover on driver's side
          • B. Cover on passenger's side
          • A. Driver's side
          • B. Passenger side
        • Removal and installation of compartment for spectacles - RA68001290155X(68-155)
        • Removal and installation of center console - RA68001290200X(68-200)
        • Removal and installation of cover for compartment in center console - RA68001290210X(68-210)
        • Removal and installation of cassette compartment and ashtray housing - RA68001290220X(68-220)
        • Removal and installation of gear shift lever cover - RA68001290230X(68-230)
        • Removal and installation of armrest - RA68001290240X(68-240)
        • Removal and installation of window molding on side of windshield - RA68001290400X(68-400)
        • Removal and installation of molding above windshield - RA68001290410X(68-410)
        • Removal and installation of window molding on coupe roof, side and rear - RA68001290420X(68-420)
        • Removal and installation of window molding at top of windshield - RA68001290425X(68-425)
        • Removal and installation of headliner on coupe roof - RA68001290430X(68-430)
        • Removal and installation of rear side wall - RA68001290455X(68-455)
        • Removal and installation of luggage shelf - RA68001290472X(68-472)
        • Removal and installation of ornamental frame for rear window on coupe roof - RA68001290560X(68-560)
        • Removal and installation of ornamental frame for side window on coupe roof - RA68001290570X(68-570)
    • Power Mirrors
      • Description & Operation
      • System Tests
      • Removal & Installation
        • Notes
        • Outside Mirror
          • Removal & Installation
        • Outside Mirror Glass
          • Removal & Installation
        • Outside Mirror Motor
          • Removal & Installation
      • Wiring Diagrams
  • Seats
    • Power Seats
      • Description & Operation
      • Programming
        • Memory Seats
        • Enabling Code Function For Radio
        • Reactivating Steering Angle Sensor
      • Removal & Installation
        • Notes
        • Backrest Motor
          • Notes
          • Removal & Installation
        • Backrest Cushion
          • Removal & Installation
        • Forward/Rearward Motor
          • Removal & Installation
        • Front Height Motor
          • Removal & Installation
        • Front Seat
          • Removal & Installation
        • Front Seat Cushion
          • Removal & Installation
        • Headrest Motor
          • Notes
          • Removal & Installation
        • Rear Height Motor
          • Removal & Installation
      • Wiring Diagrams
    • Seats, Restraint Systems -- 129 Chassis
      • General Information
        • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002
          • Important instructions for performing repair, body and welding work on vehicles with airbags and emergency tensioning retractors - AH91.00-P-0002-01A
          • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002-01B
        • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006
          • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006-01A
          • Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B
      • User Information
        • Confirmation for deactivation of airbag - OV91.60-P-0001-01A
      • Basic Knowledge
        • Electric seat adjustment (ESA), function - GF91.29-P-0004AA
        • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02A
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02B
        • Front emergency tensioning retractor, function - GF91.40-P-4000
          • Front emergency tensioning retractor, design - GF91.40-P-4000-02A
          • Front emergency tensioning retractor, function - GF91.40-P-4000-03A
        • Triggering mechanism of supplemental restraint system (SRS) - GF91.60-P-0002-08F
      • Safety Precautions
        • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001
          • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01A
          • Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Seats, bunks, restraint systems - AR91.00-Z-9129AA
        • Removing and installing control valve for multi-contour seat - AR91.25-P-1710C
        • Removing and installing air cushions in multi-contour backrest - AR91.25-P-1740C
        • Removing and installing multi-contour seat air cushions - AR91.25-P-1770C
        • Removing and installing drive for horizontal seat adjustment - AR91.29-P-1300A
        • Removing and installing drive for seat height adjustment - AR91.29-P-1421
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421A
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421B
        • Removing and installing front seat backrest motor - AR91.29-P-1431A
        • Removing and installing front seat head restraint motor - AR91.29-P-1432A
        • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001G
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001H
        • Reactivating passenger airbag after deactivation - AR91.60-P-0002
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002G
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002H
        • Removing and installing front passenger seat occupied recognition sensor - AR91.60-P-0720C
      • Repair & Adjustments
        • (91-830)
          • Testing function of roll-over bar - RA91001240830X(91-830)
          • Testing roll-over bar for proper function - RA91001290830X(91-830)
        • (91-860)
          • Removal and installation of left and right rear axle switches - RA91001240860X(91-860)
          • Removing and installing left and right rear axle switches up to 05/95 - RA91001290860X(91-860)
        • Function description, front seats - RA91001290010X(91-010)
        • Removing and installing front seat head restraints - RA91001290052X(91-052)
        • Removing and installing adjustment mechanism for head restraint and upper belt guide fitting - RA91001290053X(91-053)
        • Removing and installing front seat cushion and backrest cushion - RA91001290055X(91-055)
        • Converting mount at front of front seat cushion - RA91001290057X(91-057)
        • Removing and installing covering on side of backrest frame - RA91001290060X(91-060)
        • Removing and installing covering on rear of front seat backrest - RA91001290065X(91-065)
        • Removing and installing side covering on outside of seat cushion frame - RA91001290070X(91-070)
        • Removing and installing cover on upper belt guide fitting - RA91001290075X(91-075)
        • Removing and installing front seat - RA91001290100X(91-100)
        • Removing and installing seat rail - RA91001290120X(91-120)
        • Removing and installing gear with spindle for forward/backward seat adjustment mechanism - RA91001290122X(91-122)
        • Removing and installing gear for seat height adjustment, front - RA91001290123X(91-123)
        • Removing and installing gear for seat height adjustment, rear - RA91001290124X(91-124)
        • Removing and installing gear for backrest adjustment - RA91001290125X(91-125)
        • Removing and installing backrest lock on front seat - RA91001290130X(91-130)
        • Repairing damaged female threads on seat frame - RA91001290140X(91-140)
        • Checking front seat frame following accident - RA91001290151X(91-151)
        • Removing and installing control cables for backrest lock - RA91001290155X(91-155)
        • Removing and installing cover on front seat cushion - RA91001290180X(91-180)
        • Removing and installing cover on front seat backrest cushion - RA91001290182X(91-182)
        • Removing and installing rear seat - RA91001290200X(91-200)
        • Removing and installing emergency tensioning retractors - RA91001290502X(91-502)
        • Seat belt replacement regulations - RA91001290550X(91-550)
        • Removing and installing ETR control module or ETR with airbag control module - RA91001290622X(91-622)
        • Instructions for replacing seat belts - RA91001290625X(91-625)
        • Removing and installing emergency tensioning retractor (ETR) - RA91001290630X(91-630)
        • Removing and installing airbag unit in steering wheel - RA91001290660X(91-660)
        • Removing and installing side airbag unit - RA91001290690X(91-690)
        • Removing and installing side airbag sensor - RA91001290710X(91-710)
        • Function description of roll-over bar - RA91001290800X(91-800)
        • Safety regulations for roll-over bars - RA91001290820X(91-820)
        • Removing and installing roll-over bar crash actuated trigger module up to 05/95 - RA91001290840X(91-840)
        • Removing and installing soft top control module - RA91001290841X(91-841)
        • Removing and installing roll-over bar convenience switch - RA91001290880X(91-880)
        • Removing and installing roll-over bar - RA91001290900X(91-900)
        • Adjusting roll-over bar - RA91001290920X(91-920)
        • Description of operation of airbag with ETR and side airbag - RA9100129A600X(91-600)
        • Safety precautions for airbag, side airbag and emergency tensioning retractor - RA9100129A610X(91-610)
          • Notes
          • A: General
          • B. Shipping airbag, side airbag and emergency tensioning retractor units
          • C. Storing airbag, side airbag and emergency tensioning retractor units
          • D. Installation and removal of airbag, side airbag and emergency tensioning retractor units
          • E. Rendering airbag, side airbag and ETR units unusable
          • F. Disposing of faulty components of restraint system
          • G. Important instructions for performing repair, body and welding work
        • Removing, installing passenger airbag unit - RA9100129A680X(91-680)
          • Passenger airbag unit (up to approx. 08/95)
          • B. Passenger airbag unit (as of approx. 09/95)
        • Technical modifications, group 91 - RA9100129TA00X
        • Technical modifications, group 91 - RA9100129TA01X
      • Component Modifications
        • Discontinuation of control module and rear axle switch (roll bar) - BT91.59-P-0001-01A
  • Sun Roof/T-Top/Convertible Top
    • Sliding Roof, Soft Top -- 129 Chassis
      • General Information
        • Notes on hardtop - AH77.30-P-1000-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Sliding roof, soft top, top attachments - AR77.00-Z-9129AA
        • Removing and installing base in soft top compartment - AR77.30-P-2000A
        • Remove/install roof window on glass roof - AR77.50-P-1000C
          • Notes
          • Cutting out roof panel with cutting blade - AR77.50-P-1000-01C
          • Preparing roof opening for inserting glass panel - AR77.50-P-1000-02C
          • Preparing roof panel for inserting glass panel - AR77.50-P-1000-03C
          • Inserting glass panel supports at roof opening - AR77.50-P-1000-04C
          • Aligning roof panel in roof opening - AR77.50-P-1000-05C
          • Apply glue to roof cutout - AR77.50-P-1000-06C
          • Inserting glass panel - AR77.50-P-1000-07C
        • Checking, adjusting gap between hard top and windshield molding strip - AR77.50-P-4400A
        • Sealing rail on hard top - AR77.50-P-4500A
      • Repair & Adjustments
        • Function description of roadster top, coupe roof - RA77001290010X(77-010)
        • Removal and installation of top - RA77001290300X(77-300)
        • Adjustment of top - RA77001290303X(77-303)
        • Replacing front top covering - RA77001290305X(77-305)
        • Replacing rear top covering - RA77001290310X(77-310)
        • Replacing headliner - RA77001290315X(77-315)
        • Removal and installation of center catches, left and right - RA77001290320X(77-320)
        • Removal and installation of hydraulic cylinder for center catches - RA77001290324X(77-324)
        • Removal and installation of rear catches, left and right - RA77001290325X(77-325)
        • Removal and installation of hydraulic cylinders for rear catches - RA77001290328X(77-328)
        • Removal and installation of front catches on left and right - RA77001290330X(77-330)
        • Removal and installation of hydraulic cylinders for front catches - RA77001290335X(77-335)
        • Removal and installation of hydraulic unit - RA77001290350X(77-350)
        • Removal and installation of hydraulic cylinders for top actuation - RA77001290355X(77-355)
        • Removal and installation of hydraulic cylinder for soft top bow - RA77001290360X(77-360)
        • Removal and installation of hydraulic cylinder for top compartment cover - RA77001290370X(77-370)
        • Removal and installation of valve blocks - RA77001290380X(77-380)
        • Renewing solenoid valves - RA77001290385X(77-385)
        • Removal and installation of limit switch, roll bar down - RA77001290400X(77-400)
        • Removal and installation of limit switch, top compartment cover open - RA77001290405X(77-405)
        • Removal and installation of limit switch, side window down - RA77001290410X(77-410)
        • Removal, installation and adjustment of limit switch, top up (differential operation) - RA77001290415X(77-415)
        • Adjustment of coupe roof - RA77001290420X(77-420)
        • Removal, installation and adjustment of limit switch for top in top compartment - RA77001290425X(77-425)
        • Adjusting glass roof - RA77001290430X(77-430)
        • Removal, installation and adjustment of limit switch, cloth holding brace up position - RA77001290435X(77-435)
        • Removal, installation and adjustment of limit switch, top compartment cover closed and locked - RA77001290440X(77-440)
        • Removal, installation and adjustment of limit switch - top locked at front (only possible with top tester produced by Bara-Electronic) - RA77001290443X(77-443)
        • Removal, installation and adjustment of limit switch, cloth holding brace closed and locked - RA77001290445X(77-445)
        • Removal and installation of control unit for top - RA77001290450X(77-450)
  • Towing Systems
    • Frame, Trailer Operation -- 129 Chassis
      • General Information
        • Notes on installing a trailer coupling - AH31.10-P-1000-02B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Frame, trailer operation - AR31.00-Z-9129AA
        • Removing and installing trailer coupling - AR31.10-P-8000T
  • Windows
    • Doors & Windows -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Doors - AR72.00-Z-9129AA
        • Removing and installing door liner on front door - AR72.10-P-1000A
        • Removing and installing power window motor in front door - AR72.29-P-1860A
      • Repair & Adjustments
        • Removal, installation and adjustment of driver's door - RA72001290050X(72-050)
        • Removal and installation of door liner - RA72001290100X(72-100)
        • Disassembly and assembly of door liner - RA72001290103X(72-103)
        • Removal and installation of inner rail - RA72001290160X(72-160)
        • Removal and installation of outer rail - RA72001290170X(72-170)
        • Removal and installation of window lift - RA72001290181X(72-181)
        • Removal and installation of crank window - RA72001290190X(72-190)
        • Adjustment of crank windows - RA72001290195X(72-195)
        • Removal and installation of window guide, front - RA72001290200X(72-200)
        • Removal and installation of door holder - RA72001290210X(72-210)
        • Removal and installation of door sealing frame - RA72001290220X(72-220)
        • Removal and installation of inside door control - RA72001290230X(72-230)
        • Removal and installation of outside door handle - RA72001290240X(72-240)
        • Removal and installation of door lock - RA72001290250X(72-250)
        • Removal and installation of striker eye - RA72001290260X(72-260)
    • Windows -- 129 Chassis
      • Safety Precautions
        • Risk of injury caused by slipping when clamping blade in the multicutter and by glass splinters when cutting out bonded windows - AS67.00-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Windows - AR67.00-Z-9129AA
        • Remove/install windshield - AR67.10-P-1000C
          • Notes
          • Cutting out windshield with cutting blades - AR67.10-P-1000-01C
          • Prepare window for installation - AR67.10-P-1000-03P
          • Aligning windshield in body opening - AR67.10-P-1000-04C
          • Preparing glue cartridge - AR67.10-P-1000-07K
          • Prepare glue cartridge - AR67.10-P-1000-07P
          • Apply adhesive material - AR67.10-P-1000-08P
        • Install windshield - AR67.10-P-1503
          • Prepare body flange for installation of window - AR67.10-P-1501-01CA
          • Prepare body flange for installation of window - AR67.10-P-1501-01P
          • Install windshield - AR67.10-P-1503-01C
        • Remove/install rear window - AR67.20-P-2000
          • Remove/install rear window - AR67.20-P-2000C
            • Notes
            • Cutting out rear window with cutter - AR67.20-P-2000-02C
            • Aligning rear window in body opening - AR67.20-P-2000-04C
            • Install rear window - AR67.20-P-2000-05C
          • Remove/install rear window - AR67.20-P-2000CA
            • Notes
            • Replacing rubber spacers - AR67.20-P-2000-03C
            • Aligning rear window in body opening - AR67.20-P-2000-04CA
        • Remove/install side window - AR67.30-P-2305C
          • Notes
          • Inserting side window - AR67.30-P-2305-03C
        • Cutting out side window with cutting blade - AR67.30-P-4050-01C
• Brakes
  • Mechanical - Hydraulic
    • Brakes - Pneumatic System -- 129 Chassis
      • General Information
        • Notes on brake servo - AH43.20-P-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Brakes - pneumatic system and auxiliary brakes - AR43.00-Z-9129AA
        • Checking check valve - AR43.10-P-0023A
        • Connecting and disconnecting tester at brake booster - AR43.10-P-0024-01A
        • Check brake booster - AR43.10-P-0325A
        • Removing and installing brake booster - AR43.10-P-0350A
      • Repair & Adjustments
        • Notes on accident prevention on brake roller dynamometers - RA302DFK0009X(42 - 0009)
    • Brakes -- 129 Chassis
      • General Information
        • Notes on repairs to brake system - AH42.00-P-0003-01A
        • Notes on installing brake pad wear sensor contact sensors - AH42.10-P-0003-01A
        • Notes on brake components - AH42.10-P-9406
          • Notes on installing brake hoses - AH42.10-P-9406-01A
          • Notes on externally invisible brake fluid loss - AH42.10-P-9406-02A
          • Notes if piston or cylinder bore are damaged on fixed or floating caliper - AH42.10-P-9406-03A
          • Notes on installation of brake discs - AH42.10-P-9406-04A
        • Brake fluid notes - AH42.50-P-0001-01A
      • Basic Knowledge
        • Friction brake foot controls/parking brake, function - GF42.20-P-1000A
        • Braking Assistant (BAS), function - GF42.31-P-0001A
          • Notes
          • Brake Assist (BAS): Driver Information - GF42.31-P-0001-01A
          • Brake Assist (BAS), arrangement of components - GF42.31-P-0001-02A
        • BAS brake application, function - GF42.31-P-2000A
        • BAS function in normal operation - GF42.31-P-3000A
        • BAS pressure increase function - GF42.31-P-3100A
        • BAS pressure reduction function - GF42.31-P-3200A
        • Electronic Traction Support (ETS) function - GF42.35-P-0001A
          • Notes
          • Electronic traction system (ETS), task/benefits - GF42.35-P-0001-02A
          • Electronic traction system (ETS), function survey - GF42.35-P-0001-04A
        • Function of ETS control module - GF42.35-P-4500-01A
        • Acceleration slip regulation (ASR V/ETS), location of electrical/electronic components - GF42.40-P-0005-03A
        • ASR drive torque control circuit, function - GF42.40-P-2100A
        • Location/purpose/design/function of ASR V/ETS hydraulic unit - GF42.40-P-4000A
          • Notes
          • Design ASR V/ETS hydraulic unit - GF42.40-P-4000-01A
          • ASR V/ETS hydraulic unit, function - GF42.40-P-4000-02A
        • Electronic stability program (ESP), function - GF42.45-P-0001A
          • Notes
          • Electronic stability program (ESP), location of hydraulic components - GF42.45-P-0001-02A
          • Electronic stability program (ESP), location of electrical components - GF42.45-P-0001-03A
        • ESP brake moment control circuit, function - GF42.45-P-2000A
      • Safety Precautions
        • Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid - AS42.50-Z-0001-01A
        • Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. - AS42.50-Z-0002-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Brakes - hydraulic and mechanical systems - AR42.00-Z-9129AA
        • Bleed brake system. - AR42.10-P-0010A
          • Notes
          • Actuation of brake master cylinder switchover valve - AR42.10-P-0010-01A
          • Risk of poisoning Risk of injury - AR42.10-P-0010-02A
          • Carrying out bleeding operation Risk of poisoning Risk of injury - AR42.10-P-0010-02B
          • Risk of poisoning Risk of injury - AR42.10-P-0010-02E
        • Replacing brake hoses - AR42.10-P-0013A
        • Test brake system with pressure tester for leaks - AR42.10-P-0015A
        • Removing and installing mechanical stop lamp switch - AR42.10-P-0040A
        • Removing and installing front brake caliper - AR42.10-P-0070AM
        • Removing and installing rear brake caliper - AR42.10-P-0080AM
        • Check brake system for leaks - AR42.10-P-0100-01A
        • Repairing fixed caliper on front axle - AR42.10-P-0150A
        • Repairing fixed caliper on rear axle - AR42.10-P-0151A
        • Remove/install brake disc - AR42.10-P-0220A
          • Notes
          • Withdrawing roll pins on front wheel hub Device for withdrawing the roll pin on the front wheel hub - AR42.10-P-0220-01A
        • Cleaning brake discs with cleaning pads - AR42.10-P-0260A
        • Removing and installing stepped tandem master brake cylinder - AR42.10-P-0310A
        • Repairing stepped tandem brake master cylinder - AR42.10-P-0315A
          • Notes
          • Dismantling stepped tandem brake master cylinder - AR42.10-P-0315-01A
          • Assembling stepped tandem brake master cylinder - AR42.10-P-0315-02A
        • Remove/check/install front axle brake pads - AR42.10-P-1600DM
        • Removing, checking and installing rear axle brake pads - AR42.10-P-1700AM
        • Remove/install parking brake pedal assembly - AR42.20-P-0510A
        • Remove/install front brake cable - AR42.20-P-0520A
        • Removing and installing rear brake control cable - AR42.20-P-0525A
        • Removing and installing brake shoes of parking brake - AR42.20-P-0530A
        • Adjust parking brake - AR42.20-P-0540A
        • Removing and installing front left or right rpm sensor - AR42.30-P-0712A
        • Removing and installing BAS control module - AR42.31-P-6001A
        • Removing and installing BAS diaphragm travel sensor - AR42.31-P-6002A
        • Removing and installing ETS/ASR/ESP hydraulic unit - AR42.40-P-0816A
        • Remove/install left or right rear axle speed sensor - AR42.40-P-0820A
        • Removing and installing ESP charging pump - AR42.45-P-0818A
        • Removing and installing ESP charge plunger unit - AR42.45-P-0819A
      • Repair & Adjustments
        • Important information on repairs - RA42001240702X(42-0702)
        • Removal and installation of hydraulic unit (A7) - RA42001240705X(42-0705)
        • Removal and installation of ABS control unit - RA42001240708X(42-0708)
        • Removal and installation of relays for solenoid valve and charge/return pump - RA42001240710X(42-0710)
        • Removal and installation of overvoltage protection/basic module - RA42001240711X(42-0711)
        • Removal and installation of front wheel-speed sensors - RA42001240712X(42-0712)
        • Removal and installation of rear wheel-speed sensor - RA42001240714X(42-0714)
        • Function and test of 5, 7 and 9-pin relays Overvoltage protection from 09/85 - RA42001240725X(42-0725)
        • Test instructions for ABS tester with fault memory Part No. 124 589 22 21 00 - RA42001240730X(42-0730)
        • Design and function of anti-lock braking system - RA4200124A700X(42-0700)
          • Design and function of anti-lock braking system - RA4200124A700X(42-0700)
            • A: General
            • B: Driving with ABS
            • C: Location of components
          • Design and function of anti-lock braking system - RA4200124B700X(42-0700)
            • D. Overall function
            • E. Hydraulics
            • F. Electronics
          • Design and function of anti-lock braking system - RA4200124C700X(42-0700)
            • G. Revised brake-force distribution between front and rear axles Model 124.036 from 02/93, 129.076 and 140.04/05/07
        • Notes for towing, or test and repair work, and handling ASR components on vehicles following an accident - RA42001400810X(42-0810)
        • Removal and installation of ASR hydraulic unit (A7/3) - RA42001400816X(42-0816)
        • Removal and installation of ASR pressurizing pump (M15) - RA42001400818X(42-0818)
        • Removal and installation of accumulator - RA42001400819X(42-0819)
        • Removal and installation of left or right rear axle speed sensors (L6/3, L6/4) - RA42001400820X(42-0820)
        • Removal and installation of ASR control unit (N30/1) - RA42001400821X(42-0821)
        • Test program - ASR II electrics/electronics - RA42001400822X(42-0822)
        • Test program - ASR II hydraulics - RA42001400824X(42-0824)
        • Design and function of acceleration skid control ASR II - RA4200140A800X(42-0800)
        • F. Location of hydraulic components - RA4200140B800X
        • Technical modifications - RA4200140TA00X
        • Technical modifications - RA4200202TA00X
      • Component Modifications
        • Brake hose connection on brake pipe modified - BT42.10-P-0001-01A
        • Modified front axle brake discs - BT42.10-P-9406-01A
        • Parking brake pedal assembly modified - BT42.20-P-0510-01A
    • Disc
      • Identification
      • Description & Operation
      • Bleeding Brake System
        • Notes
        • Brake System Application
        • Bleeding Procedure
          • Procedure A
          • Procedure B
          • Procedure C
      • Adjustments
        • Stoplight Switch
        • Parking Brake Adjustment Procedure Direction
        • Parking Brake
          • Notes
          • Procedure A
          • Procedure B
          • Procedure C
          • Procedure D
        • PRELOADING Automatic Parking Brake Cable Adjuster
          • C-Class, CLK & E-Class Vehicles
          • CL, ML & S-Class Vehicles
        • Wheel Bearings
          • Notes
          • Front Wheel Bearings
          • Rear Wheel Bearings
      • Testing
        • Brake Fluid Loss
        • Brake Warning Light
      • Removal & Installation
        • Notes
        • Front Caliper Application
        • Front Disc Brake Pads (Fixed Caliper)
          • Removal & Installation
        • Front Disc Brake Pads (Floating Caliper)
          • Removal & Installation
        • Rear Disc Brake Pads (Fixed Caliper)
          • Notes
          • Removal & Installation
        • Disc Brake Caliper
          • Removal
          • Installation
        • Disc Brake Rotor
          • Removal & Installation
        • Master Cylinder
          • Notes
          • Removal
          • Installation
        • Parking Brake Linings
          • Notes
          • Removal
          • Installation
        • Brake Booster
          • Removal & Installation
      • Overhaul
        • Notes
        • Servicing Precautions
          • Aluminum Pistons
          • Brake Calipers
          • Chrome Pistons
          • 4-Piston Fixed Calipers
        • Fixed Caliper (Front Axle)
        • Fixed Caliper (Rear Axle)
        • Floating Caliper (Front Axle)
        • Master Cylinder
        • Brake Booster
      • Torque Specifications
      • Disc Brake Specifications
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
    • Pedal Assembly -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Pedal assembly - AR29.00-Z-9129AA
        • Removal and installation of foot controls - AR29.10-P-0300A
        • Dismantling and assembling foot controls - AR29.10-P-0350A
• Drivelines & Axles
  • Axle Shafts
    • Axle Shafts - Rear - 126, 129, 140, 202, 208, 209 & 210 Chassis
      • Model Identification
      • Description & Operation
      • Removal, Disassembly, Reassembly & Installation
        • Rear Axle Shafts
          • Notes
          • Removal
          • Disassembly
          • Inspection
          • Reassembly
          • Installation
        • CV Joint Grease Quantity
      • Torque Specifications
    • Front Axle -- 129 Chassis
      • Repair & Adjustments
        • Technical data - RA33001240010X(33-0010)
        • Removing and installing front axle halves - RA33001240200X(33-0200)
        • Adjusting wheel bearing play - RA33001240300X(33-0300)
        • Removing and installing front wheel hub - RA33001240310X(33-0310)
        • Replacing front wheel hub - RA33001240320X(33-0320)
        • Removing and installing steering knuckle - RA33001240400X(33-0400)
        • Removing and installing steering knuckle arm - RA33001240420X(33-0420)
        • Checking supporting joint of steering knuckle mounting - RA33001240425X(33-0425)
        • Replacing boot for supporting joint of steering knuckle mounting - RA33001240430X(33 - 0430)
        • Replacing supporting joint - RA33001240440X(33-0440)
        • Replacing control arm mounting - RA33001240526X(33-0526)
        • RA3300124PR00X
        • Technical modifications front axle Models 124, 129, 201 - RA3300124TA00X
    • Rear Axle -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Rear axle - AR35.00-Z-9129AA
        • Removing and installing complete rear axle - AR35.10-P-0010C
          • Notes
          • Removing and installing bracket for ADS level controller - AR35.10-P-0010-01A
        • Removing, installing front and rear rubber mount of rear axle mount - AR35.10-P-0040C
          • Notes
          • Removing and installing front rubber mounts of rear axle mounting - AR35.10-P-0040-02D
          • Removing and installing rear rubber mounts of rear axle mounting - AR35.10-P-0040-03E
        • Removing, installing rear rubber mount for center assembly mount in rear axle carrier - AR35.10-P-0050C
          • Notes
          • Install front differential mount - AR35.10-P-0050-01A
          • Removing and installing rear rubber mounts of rear axle center assembly mounting - AR35.10-P-0050-02C
          • Checking installed position of center assembly in rear axle carrier - AR35.10-P-0050-03C
          • Supporting rear axle with wooden blocks - AR35.10-P-0050-04A
        • Remove/install camber strut - AR35.20-P-0110B
          • Notes
          • Inserting sleeve for camber strut in wheel carrier - AR35.20-P-0110-02A
        • Remove/install radius rod - AR35.20-P-0111B
          • Notes
          • Inserting sleeve for tensile strut in wheel carrier - AR35.20-P-0111-01A
        • Remove/install tie rod and replacement of rubber mount - AR35.20-P-0112B
          • Notes
          • Removal and installation of track rod rubber mount - AR35.20-P-0112-01B
        • Remove/install torque strut - AR35.20-P-0113B
          • Notes
          • Inserting sleeve for torque strut in wheel carrier - AR35.20-P-0113-01A
        • Remove/install spring link, replace rubber mount - AR35.20-P-0114B
          • Notes
          • Remove/install spring link rubber mount - AR35.20-P-0114-01B
          • Removing and installing guide rail at spring link - AR35.20-P-0114-02A
        • Remove/install wheel carrier - AR35.20-P-0115B
        • Removing, installing supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116B
          • Notes
          • Remove/install supporting joint on wheel carrier - AR35.20-P-0116-01B
        • Remove/install rear axle shaft flange and angular ball bearing - AR35.20-P-0130B
          • Notes
          • Pulling rear axle shaft flange out and in (wheel carrier installed) - AR35.20-P-0130-01A
          • Pulling out and drawing in rear-axle shaft flange (wheel carrier installed) - AR35.20-P-0130-01B
          • Pull bearing inner race off rear axle shaft flange - AR35.20-P-0130-02A
          • Remove/install double-row angular ball bearing in wheel carrier - AR35.20-P-0130-03A
          • Pulling jammed rear axle shaft flange out and in (wheel carrier removed) - AR35.20-P-0130-04GH
        • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115
          • Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03B
        • Remove/install rear axle shaft - AR35.30-P-0620A
        • Remove/install inside CV joint or rubber boots on rear axle shaft - AR35.30-P-0660A
          • Notes
          • Installing end cover and cup seal on joint ring - AR35.30-P-0660-01A
          • Inner constant-velocity joint on rear halfshaft, extraction and pressing on - AR35.30-P-0660-02A
          • Inner constant-velocity joint - Dismantling, inspecting for wear, assembly - AR35.30-P-0660-03A
        • Remove/install rear axle differential - AR35.31-P-0520C
        • Connecting flange components - AR35.31-P-0540
          • Detaching, mounting connecting flange circlip - AR35.31-P-0540-01A
          • Pulling off and pressing on grooved ball bearing connecting flange - AR35.31-P-0540-04A
        • Clamping differential housing - AR35.31-P-0560-01A
        • Bleeding ASD hydraulic system - AR35.41-P-0519C
        • Repairing ASD ring cylinder - AR35.41-P-0545
          • Repairing ASD ring cylinder - AR35.41-P-0545C
            • Notes
            • Removing and installing ASD hydraulic pipe on rear axle center assembly - AR35.41-P-0545-01C
            • Removing and installing ring cylinder - AR35.41-P-0545-02C
            • Installing oil deflector in rear axle housing - AR35.41-P-0545-03C
            • Repairing ring cylinder - AR35.41-P-0545-04C
          • Repairing ASD ring cylinder - AR35.41-P-0545D
            • Notes
            • Repairing ring cylinder - AR35.41-P-0545-04D
        • Dismantling and assembling ASD differential - AR35.41-P-0560C
          • Notes
          • Driving out and driving in ASD differential pin and roll pin - AR35.41-P-0560-02C
          • Removing and installing differential bevel gears with spherical washers - AR35.41-P-0560-03C
          • Removing and installing differential side gears with friction washers - AR35.41-P-0560-04C
          • Checking friction torque of ASD differential - AR35.41-P-0560-05C
      • Repair & Adjustments
        • Distinguishing features and installation survey for rear axle center piece in models 129 and 140 - RA3500HMV0500X(35-500)
        • Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMV0550X(35-550)
        • Repairing differential - RA3500HMV0560X(35-560)
        • Technical modifications Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMVTA00X
      • Component Modifications
        • Increased core diameter of rear rubber mounts in rear axle cross member - BT35.10-P-0001-01A
        • Stiffer spring link rubber mounts - BT35.20-P-0001-01A
        • Standardization of spring link rubber mounts - BT35.20-P-0002-01A
        • Diameter of wheel carrier holes modified - BT35.20-P-0005-01A
        • Bolted connection of torque strut to wheel carrier modified - BT35.20-P-0006-01A
        • Bolted connection of camber strut to wheel carrier modified - BT35.20-P-0007-01A
        • Bolted connection of tensile strut to wheel carrier modified - BT35.20-P-0008-01A
        • Bolted connection of track rod to wheel carrier revised - BT35.20-P-0009-01A
        • Rear axle shaft strengthened at ball cage k - BT35.30-P-0001-01A
        • Rear axle shaft diameter increased - BT35.30-P-0002-01A
        • Modified rear axle shaft rubber boot and hose clamp - BT35.30-P-0003-01A
        • Centered rear axle shaft and connecting flange - BT35.30-P-0004-01A
        • Rear axle shafts with forged centers (without core hole bore) - BT35.30-P-0005-01A
        • Modified front mounting of rear axle center assembly - BT35.31-P-0001-01A
        • Tapped hole of speed sensor on rear axle housing moved - BT35.31-P-0004-01A
        • Balancing of differential housing - BT35.31-P-0006
          • Balancing of differential housing - BT35.31-P-0006-01B
          • Balancing of differential housing - BT35.31-P-0006-01C
        • Connecting flange with centering - BT35.31-P-0009-01A
        • Routing of ASD ring cylinder and hydraulic pipe modified - BT35.41-P-0002-01A
  • Differentials & Drive Axles
    • Axle Shafts - Rear - 126, 129, 140, 202, 208, 209 & 210 Chassis
      • Model Identification
      • Description & Operation
      • Removal, Disassembly, Reassembly & Installation
        • Rear Axle Shafts
          • Notes
          • Removal
          • Disassembly
          • Inspection
          • Reassembly
          • Installation
        • CV Joint Grease Quantity
      • Torque Specifications
    • Front Axle -- 129 Chassis
      • Repair & Adjustments
        • Technical data - RA33001240010X(33-0010)
        • Removing and installing front axle halves - RA33001240200X(33-0200)
        • Adjusting wheel bearing play - RA33001240300X(33-0300)
        • Removing and installing front wheel hub - RA33001240310X(33-0310)
        • Replacing front wheel hub - RA33001240320X(33-0320)
        • Removing and installing steering knuckle - RA33001240400X(33-0400)
        • Removing and installing steering knuckle arm - RA33001240420X(33-0420)
        • Checking supporting joint of steering knuckle mounting - RA33001240425X(33-0425)
        • Replacing boot for supporting joint of steering knuckle mounting - RA33001240430X(33 - 0430)
        • Replacing supporting joint - RA33001240440X(33-0440)
        • Replacing control arm mounting - RA33001240526X(33-0526)
        • RA3300124PR00X
        • Technical modifications front axle Models 124, 129, 201 - RA3300124TA00X
    • Rear Axle -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Rear axle - AR35.00-Z-9129AA
        • Removing and installing complete rear axle - AR35.10-P-0010C
          • Notes
          • Removing and installing bracket for ADS level controller - AR35.10-P-0010-01A
        • Removing, installing front and rear rubber mount of rear axle mount - AR35.10-P-0040C
          • Notes
          • Removing and installing front rubber mounts of rear axle mounting - AR35.10-P-0040-02D
          • Removing and installing rear rubber mounts of rear axle mounting - AR35.10-P-0040-03E
        • Removing, installing rear rubber mount for center assembly mount in rear axle carrier - AR35.10-P-0050C
          • Notes
          • Install front differential mount - AR35.10-P-0050-01A
          • Removing and installing rear rubber mounts of rear axle center assembly mounting - AR35.10-P-0050-02C
          • Checking installed position of center assembly in rear axle carrier - AR35.10-P-0050-03C
          • Supporting rear axle with wooden blocks - AR35.10-P-0050-04A
        • Remove/install camber strut - AR35.20-P-0110B
          • Notes
          • Inserting sleeve for camber strut in wheel carrier - AR35.20-P-0110-02A
        • Remove/install radius rod - AR35.20-P-0111B
          • Notes
          • Inserting sleeve for tensile strut in wheel carrier - AR35.20-P-0111-01A
        • Remove/install tie rod and replacement of rubber mount - AR35.20-P-0112B
          • Notes
          • Removal and installation of track rod rubber mount - AR35.20-P-0112-01B
        • Remove/install torque strut - AR35.20-P-0113B
          • Notes
          • Inserting sleeve for torque strut in wheel carrier - AR35.20-P-0113-01A
        • Remove/install spring link, replace rubber mount - AR35.20-P-0114B
          • Notes
          • Remove/install spring link rubber mount - AR35.20-P-0114-01B
          • Removing and installing guide rail at spring link - AR35.20-P-0114-02A
        • Remove/install wheel carrier - AR35.20-P-0115B
        • Removing, installing supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116B
          • Notes
          • Remove/install supporting joint on wheel carrier - AR35.20-P-0116-01B
        • Remove/install rear axle shaft flange and angular ball bearing - AR35.20-P-0130B
          • Notes
          • Pulling rear axle shaft flange out and in (wheel carrier installed) - AR35.20-P-0130-01A
          • Pulling out and drawing in rear-axle shaft flange (wheel carrier installed) - AR35.20-P-0130-01B
          • Pull bearing inner race off rear axle shaft flange - AR35.20-P-0130-02A
          • Remove/install double-row angular ball bearing in wheel carrier - AR35.20-P-0130-03A
          • Pulling jammed rear axle shaft flange out and in (wheel carrier removed) - AR35.20-P-0130-04GH
        • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115
          • Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03B
        • Remove/install rear axle shaft - AR35.30-P-0620A
        • Remove/install inside CV joint or rubber boots on rear axle shaft - AR35.30-P-0660A
          • Notes
          • Installing end cover and cup seal on joint ring - AR35.30-P-0660-01A
          • Inner constant-velocity joint on rear halfshaft, extraction and pressing on - AR35.30-P-0660-02A
          • Inner constant-velocity joint - Dismantling, inspecting for wear, assembly - AR35.30-P-0660-03A
        • Remove/install rear axle differential - AR35.31-P-0520C
        • Connecting flange components - AR35.31-P-0540
          • Detaching, mounting connecting flange circlip - AR35.31-P-0540-01A
          • Pulling off and pressing on grooved ball bearing connecting flange - AR35.31-P-0540-04A
        • Clamping differential housing - AR35.31-P-0560-01A
        • Bleeding ASD hydraulic system - AR35.41-P-0519C
        • Repairing ASD ring cylinder - AR35.41-P-0545
          • Repairing ASD ring cylinder - AR35.41-P-0545C
            • Notes
            • Removing and installing ASD hydraulic pipe on rear axle center assembly - AR35.41-P-0545-01C
            • Removing and installing ring cylinder - AR35.41-P-0545-02C
            • Installing oil deflector in rear axle housing - AR35.41-P-0545-03C
            • Repairing ring cylinder - AR35.41-P-0545-04C
          • Repairing ASD ring cylinder - AR35.41-P-0545D
            • Notes
            • Repairing ring cylinder - AR35.41-P-0545-04D
        • Dismantling and assembling ASD differential - AR35.41-P-0560C
          • Notes
          • Driving out and driving in ASD differential pin and roll pin - AR35.41-P-0560-02C
          • Removing and installing differential bevel gears with spherical washers - AR35.41-P-0560-03C
          • Removing and installing differential side gears with friction washers - AR35.41-P-0560-04C
          • Checking friction torque of ASD differential - AR35.41-P-0560-05C
      • Repair & Adjustments
        • Distinguishing features and installation survey for rear axle center piece in models 129 and 140 - RA3500HMV0500X(35-500)
        • Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMV0550X(35-550)
        • Repairing differential - RA3500HMV0560X(35-560)
        • Technical modifications Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMVTA00X
      • Component Modifications
        • Increased core diameter of rear rubber mounts in rear axle cross member - BT35.10-P-0001-01A
        • Stiffer spring link rubber mounts - BT35.20-P-0001-01A
        • Standardization of spring link rubber mounts - BT35.20-P-0002-01A
        • Diameter of wheel carrier holes modified - BT35.20-P-0005-01A
        • Bolted connection of torque strut to wheel carrier modified - BT35.20-P-0006-01A
        • Bolted connection of camber strut to wheel carrier modified - BT35.20-P-0007-01A
        • Bolted connection of tensile strut to wheel carrier modified - BT35.20-P-0008-01A
        • Bolted connection of track rod to wheel carrier revised - BT35.20-P-0009-01A
        • Rear axle shaft strengthened at ball cage k - BT35.30-P-0001-01A
        • Rear axle shaft diameter increased - BT35.30-P-0002-01A
        • Modified rear axle shaft rubber boot and hose clamp - BT35.30-P-0003-01A
        • Centered rear axle shaft and connecting flange - BT35.30-P-0004-01A
        • Rear axle shafts with forged centers (without core hole bore) - BT35.30-P-0005-01A
        • Modified front mounting of rear axle center assembly - BT35.31-P-0001-01A
        • Tapped hole of speed sensor on rear axle housing moved - BT35.31-P-0004-01A
        • Balancing of differential housing - BT35.31-P-0006
          • Balancing of differential housing - BT35.31-P-0006-01B
          • Balancing of differential housing - BT35.31-P-0006-01C
        • Connecting flange with centering - BT35.31-P-0009-01A
        • Routing of ASD ring cylinder and hydraulic pipe modified - BT35.41-P-0002-01A
  • Driveshaft & Universal Joints
    • Propeller Shaft -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Propeller shaft - AR41.00-Z-9129AA
        • Removing and installing propeller shaft - AR41.10-P-0050A
          • Notes
          • Connect sections of propeller shaft - AR41.10-P-0050-05DA
          • Release guide sleeves in flexible couplings - AR41.10-P-0050-09DA
        • Measure propeller shaft alignment using mechanical propeller shaft articulated angle measuring device - AR41.10-P-0085A
          • Notes
          • Measure absolute angle at transmission - AR41.10-P-0085-01A
          • Measure absolute angle of front and rear propeller shaft - AR41.10-P-0085-02A
          • Measure absolute angle at rear axle housing - AR41.10-P-0085-03A
          • Calculate, correct articulation angle of propeller shaft - AR41.10-P-0085-04A
        • Removal and installation of propeller shaft intermediate bearing and replacement of grooved ball bearing - AR41.10-P-0100DA
          • Notes
          • Pulling off rubber mount with grooved ball bearing and front protective cap - AR41.10-P-0100-01DA
          • Pressing grooved ball bearing out and in at rubber mount of propeller shaft - AR41.10-P-0100-02DA
          • Mounting new protective cap on grooved ball bearing - AR41.10-P-0100-04DA
          • Pressing rubber mount with grooved ball bearing onto joint fork - AR41.10-P-0100-05DA
        • Replacing centering sleeve - AR41.10-P-0200DA
          • Notes
          • Removal of centering sleeve - AR41.10-P-0200-02DA
          • Pressing in centering sleeve - AR41.10-P-0200-03DA
      • Repair & Adjustments
        • Removal and installation of propeller shaft front axle on 4MATIC - RA41001070060X(41-060)
        • Balancing rear propeller shaft on vehicle model 124 - RA41001070080X(41-080)
        • Measuring propeller shaft alignment with mechanical propeller shaft articulation angle meter - RA41001070085X(41-085)
        • Removal and installation of propeller shaft intermediate bearing and renewing of grooved ball bearing - RA41001070100X(41-100)
        • Renewing centering sleeve - RA41001070200X(41-200)
        • D. Model 124 - RA4100107B050X
        • F. Model 201 - RA4100107C050X
        • Technical modifications Propeller shaft - RA4100107TA00X
      • Component Modifications
        • Clamp connection of propeller shaft - BT41.10-P-9110-01DA
        • Propeller shaft intermediate bearing - BT41.10-P-9208-01DA
  • Wheel Hubs
    • Front Axle -- 129 Chassis
      • Repair & Adjustments
        • Technical data - RA33001240010X(33-0010)
        • Removing and installing front axle halves - RA33001240200X(33-0200)
        • Adjusting wheel bearing play - RA33001240300X(33-0300)
        • Removing and installing front wheel hub - RA33001240310X(33-0310)
        • Replacing front wheel hub - RA33001240320X(33-0320)
        • Removing and installing steering knuckle - RA33001240400X(33-0400)
        • Removing and installing steering knuckle arm - RA33001240420X(33-0420)
        • Checking supporting joint of steering knuckle mounting - RA33001240425X(33-0425)
        • Replacing boot for supporting joint of steering knuckle mounting - RA33001240430X(33 - 0430)
        • Replacing supporting joint - RA33001240440X(33-0440)
        • Replacing control arm mounting - RA33001240526X(33-0526)
        • RA3300124PR00X
        • Technical modifications front axle Models 124, 129, 201 - RA3300124TA00X
    • Rear Axle -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Rear axle - AR35.00-Z-9129AA
        • Removing and installing complete rear axle - AR35.10-P-0010C
          • Notes
          • Removing and installing bracket for ADS level controller - AR35.10-P-0010-01A
        • Removing, installing front and rear rubber mount of rear axle mount - AR35.10-P-0040C
          • Notes
          • Removing and installing front rubber mounts of rear axle mounting - AR35.10-P-0040-02D
          • Removing and installing rear rubber mounts of rear axle mounting - AR35.10-P-0040-03E
        • Removing, installing rear rubber mount for center assembly mount in rear axle carrier - AR35.10-P-0050C
          • Notes
          • Install front differential mount - AR35.10-P-0050-01A
          • Removing and installing rear rubber mounts of rear axle center assembly mounting - AR35.10-P-0050-02C
          • Checking installed position of center assembly in rear axle carrier - AR35.10-P-0050-03C
          • Supporting rear axle with wooden blocks - AR35.10-P-0050-04A
        • Remove/install camber strut - AR35.20-P-0110B
          • Notes
          • Inserting sleeve for camber strut in wheel carrier - AR35.20-P-0110-02A
        • Remove/install radius rod - AR35.20-P-0111B
          • Notes
          • Inserting sleeve for tensile strut in wheel carrier - AR35.20-P-0111-01A
        • Remove/install tie rod and replacement of rubber mount - AR35.20-P-0112B
          • Notes
          • Removal and installation of track rod rubber mount - AR35.20-P-0112-01B
        • Remove/install torque strut - AR35.20-P-0113B
          • Notes
          • Inserting sleeve for torque strut in wheel carrier - AR35.20-P-0113-01A
        • Remove/install spring link, replace rubber mount - AR35.20-P-0114B
          • Notes
          • Remove/install spring link rubber mount - AR35.20-P-0114-01B
          • Removing and installing guide rail at spring link - AR35.20-P-0114-02A
        • Remove/install wheel carrier - AR35.20-P-0115B
        • Removing, installing supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116B
          • Notes
          • Remove/install supporting joint on wheel carrier - AR35.20-P-0116-01B
        • Remove/install rear axle shaft flange and angular ball bearing - AR35.20-P-0130B
          • Notes
          • Pulling rear axle shaft flange out and in (wheel carrier installed) - AR35.20-P-0130-01A
          • Pulling out and drawing in rear-axle shaft flange (wheel carrier installed) - AR35.20-P-0130-01B
          • Pull bearing inner race off rear axle shaft flange - AR35.20-P-0130-02A
          • Remove/install double-row angular ball bearing in wheel carrier - AR35.20-P-0130-03A
          • Pulling jammed rear axle shaft flange out and in (wheel carrier removed) - AR35.20-P-0130-04GH
        • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115
          • Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03B
        • Remove/install rear axle shaft - AR35.30-P-0620A
        • Remove/install inside CV joint or rubber boots on rear axle shaft - AR35.30-P-0660A
          • Notes
          • Installing end cover and cup seal on joint ring - AR35.30-P-0660-01A
          • Inner constant-velocity joint on rear halfshaft, extraction and pressing on - AR35.30-P-0660-02A
          • Inner constant-velocity joint - Dismantling, inspecting for wear, assembly - AR35.30-P-0660-03A
        • Remove/install rear axle differential - AR35.31-P-0520C
        • Connecting flange components - AR35.31-P-0540
          • Detaching, mounting connecting flange circlip - AR35.31-P-0540-01A
          • Pulling off and pressing on grooved ball bearing connecting flange - AR35.31-P-0540-04A
        • Clamping differential housing - AR35.31-P-0560-01A
        • Bleeding ASD hydraulic system - AR35.41-P-0519C
        • Repairing ASD ring cylinder - AR35.41-P-0545
          • Repairing ASD ring cylinder - AR35.41-P-0545C
            • Notes
            • Removing and installing ASD hydraulic pipe on rear axle center assembly - AR35.41-P-0545-01C
            • Removing and installing ring cylinder - AR35.41-P-0545-02C
            • Installing oil deflector in rear axle housing - AR35.41-P-0545-03C
            • Repairing ring cylinder - AR35.41-P-0545-04C
          • Repairing ASD ring cylinder - AR35.41-P-0545D
            • Notes
            • Repairing ring cylinder - AR35.41-P-0545-04D
        • Dismantling and assembling ASD differential - AR35.41-P-0560C
          • Notes
          • Driving out and driving in ASD differential pin and roll pin - AR35.41-P-0560-02C
          • Removing and installing differential bevel gears with spherical washers - AR35.41-P-0560-03C
          • Removing and installing differential side gears with friction washers - AR35.41-P-0560-04C
          • Checking friction torque of ASD differential - AR35.41-P-0560-05C
      • Repair & Adjustments
        • Distinguishing features and installation survey for rear axle center piece in models 129 and 140 - RA3500HMV0500X(35-500)
        • Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMV0550X(35-550)
        • Repairing differential - RA3500HMV0560X(35-560)
        • Technical modifications Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMVTA00X
      • Component Modifications
        • Increased core diameter of rear rubber mounts in rear axle cross member - BT35.10-P-0001-01A
        • Stiffer spring link rubber mounts - BT35.20-P-0001-01A
        • Standardization of spring link rubber mounts - BT35.20-P-0002-01A
        • Diameter of wheel carrier holes modified - BT35.20-P-0005-01A
        • Bolted connection of torque strut to wheel carrier modified - BT35.20-P-0006-01A
        • Bolted connection of camber strut to wheel carrier modified - BT35.20-P-0007-01A
        • Bolted connection of tensile strut to wheel carrier modified - BT35.20-P-0008-01A
        • Bolted connection of track rod to wheel carrier revised - BT35.20-P-0009-01A
        • Rear axle shaft strengthened at ball cage k - BT35.30-P-0001-01A
        • Rear axle shaft diameter increased - BT35.30-P-0002-01A
        • Modified rear axle shaft rubber boot and hose clamp - BT35.30-P-0003-01A
        • Centered rear axle shaft and connecting flange - BT35.30-P-0004-01A
        • Rear axle shafts with forged centers (without core hole bore) - BT35.30-P-0005-01A
        • Modified front mounting of rear axle center assembly - BT35.31-P-0001-01A
        • Tapped hole of speed sensor on rear axle housing moved - BT35.31-P-0004-01A
        • Balancing of differential housing - BT35.31-P-0006
          • Balancing of differential housing - BT35.31-P-0006-01B
          • Balancing of differential housing - BT35.31-P-0006-01C
        • Connecting flange with centering - BT35.31-P-0009-01A
        • Routing of ASD ring cylinder and hydraulic pipe modified - BT35.41-P-0002-01A
• Electrical
  • Body Electrical
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
    • OEM Connector End Views -- 129 Chassis
      • Connector End Views
        • 5-Speed AT/Engine Connector End View (X22/5)
        • AAC [KLA] Control And Operating Unit Connector End View (N22)
        • AAC/TAC [KLA/TAU] Center And Side Air Outlet Control System Connector End View (N18/2)
        • ABS Control Module Connector End View (N30)
        • ABS Hydraulic Unit Connector End View (A7)
        • ABS/ASR Control Module Connector End View (N30/1)
        • AC Wiring Harness And Engine Wiring Harness Connector End View (X85/1)
        • Accelerator Pedal Sensor Connector End View (B37)
        • ADS Comfort/Sport Switch Connector End View (S45/1)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/5)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/6)
        • ADS/Engine-Chassis Connector End View (X33/15)
        • ADS/Suspension Control Unit Connector End View (N51)
        • Air Injection Relay Connector End View (K17)
        • Amplifier For Sound System Connector End View (N40/3)
        • ASD Control Module Connector End View (N30/2)
        • ASR/SPS [PML] Control Unit Connector End View (N47-1)
        • ATA [EDW] Control Unit Connector End View (N26)
        • Automatic Antenna Connector End View (M11)
        • Automatic Transmission/Engine Connector (8-Pin) Connector End View (X22/2)
        • BAS Control Unit Connector End View (N48)
        • Base Module (GM) Connector End View (N16/1)
        • CC/ISC [TPM/LLR] Actuator Connector End View (M16/2)
        • CD Player With Changer (In Trunk) Connector End View (A2/6)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (K24)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (M14/1)
        • Cockpit/Module Box Separation Point (18-Pin) Connector End View (X35/7)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/15)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/16)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/26)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/63)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/7)
        • Combination Relay (Turn Signal Indicators With Trailer Hitch, Heated Rear Window, Wiper Motor, ATA [EDW]) Connector End View (N10/2)
        • Combination Relay (Turn Signal Indicators, Heated Rear Window, Wiper Motor) Connector End View (N10)
        • Combination Switch Connector End View (S4)
        • Comfort Shift Relay Connector End View (H7)
        • Comfort Shift Relay Connector End View (K24)
        • Control Unit Box/Engine Separation Point Connector End View (X35/63)
        • Cruise Control (CC [TPM])/Idle Speed Control (ISC [LLR]) Control Unit Connector End View (N4/3)
        • CTEL Transmitter-Receiver Junction Box (12-Pole) Connector End View (X39/11)
        • CTEL Transmitter-Receiver/Voice Activation Module Connector End View (A35/10)
        • DAS [FBS] Radio Frequency/Infrared Control Unit Connector End View (N54/4)
        • Data Link Connector End View (X11/4)
        • Daytime Running Lamp Control Unit Connector End View (N35)
        • DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/3)
        • Diagnosis II Test Connector End View (X11/22)
        • Diagnostic Module (OBD I) Connector End View (N59)
        • Diagnostic Module (OBD II) Connector End View (N59/1)
        • Dome Lamp With Shut-Off Delay And Reading Lamp Connector End View (E15)
        • Drive Authorization System Infrared Control Unit Connector End View (N54/1)
        • E-Call/Taillamp Wiring Harness Connector End View (X18/32)
        • EA/CC/ISC [EFP/TPM/LLR] Actuator Connector End View (M16/1)
        • EA/CC/ISC [EFP/TPM/LLR] Control Unit Connector End View (N4/1)
        • Electrically Adjustable Inside Rearview Mirror With Memory Connector End View (M21/3)
        • Electronic Mirror Dimming Connector End View (H7)
        • Emergency Tensioning Retractor (ETR [GUS]) With Airbag (AB) Control Unit Connector End View (N2/2)
        • Engine Separation Point Connector End View (X26/2)
        • Engine Systems Control Unit (ESCU [MAS]) Connector End View (N16)
        • ESP Yaw Rate Sensor Connector End View (N64)
        • ESP, SPS [PML] And BAS Control Unit Connector End View (N47-5)
        • ETC [EGS] Control Unit Connector End View (N15/3)
        • ETS/SPS [PML] Control Unit Connector End View (N47-2)
        • Fanfare Horn Relay Connector End View (K39)
        • Front ATA [EDW]/Rear ATA [EDW] Connector (4-Pin) Connector End View (X42)
        • Front Axle Level Sensor Connector End View (B22/2)
        • Fuel Pump Relay Connector End View (K27)
        • Gear Recognition Switch (Voltage Coded) Connector End View (S16/10)
        • Hands-Free System, Radio/Telephone Speaker Selection Relay Connector End View (A35/2)
        • Hazard Warning Flasher And CL [ZV] Switch Group Connector End View (S6)
        • HeadLamp Cleaning System (HCS [SRA]) Relay Connector End View (K2)
        • HeadLamp Harness Connector End View (X24)
        • Headlamp Range Adjustment Control Unit Connector End View (N71)
        • Heated Rear Window Switch Connector End View (S14)
        • Heating Systems, Automatic Heater, Tempmatic, Automatic Air Conditioning (HEAT [HAU], TAC [TAU], AAC [KLA])/Interior Connector (12-Pin) Connector End View (X85/2)
        • HFM-SFI [HFM] Control Unit Connector End View (N3/4)
        • Hot Film Mass Air Flow Sensor Connector End View (B2/5)
        • Hot Film Mass Air Flow Sensor Connector End View (M16/2)
        • Hot Wire Mass Air Flow Sensor Connector End View (B2/2)
        • Ignition/Starter Switch Connector End View (N16/1)
        • Ignition/Starter Switch Connector End View (S2/1)
        • Immobilizer Relay Connector End View (K38)
        • In-Car Temperature Sensor Connector End View (B10/4)
        • Infrared Remote Central Locking (IRCL [IFZ]) Control Unit Connector End View (N54)
        • Injection System Control Unit Connector End View (N3)
        • Instrument Cluster Connector End View (A1)
        • Interior And Taillamp Wiring Harness Connector (12-Pin) Connector End View (X18)
        • Interior/Engine Connector (12-Pin) Connector End View (X26)
        • Interior/Taillamp Harness Connector End View (X18/3)
        • Interior/Transmission Connector End View (X26/12)
        • Kickdown Switch (2nd Transmission Mode) Connector End View (S16/7)
        • Kickdown Switch Connector End View (S16/6)
        • Lamp Monitoring Unit Connector End View (N7)
        • Left DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/4)
        • Left EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Right Of Engine Connector End View (M16/4)
        • Left Electrically Adjustable And Heated Outside Mirror Connector End View (M21/1)
        • Left Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/7)
        • Left Front ESA Switch Group (With Memory) Connector End View (S91)
        • Left Front Lamp Unit Connector End View (E1)
        • Left Front Power Window Motor Connector End View (M10/3)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/1)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Left Front Seat Adjustment Control Unit With Memory Connector End View (N32/1)
        • Left Front Seat Contacting Strip Connector End View (X55/3)
        • Left Front Seat Heater Switch Connector End View (S51/1)
        • Left Headlamp Wiper Motor Connector End View (M6/2)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/6)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/7)
        • Left Hot Wire MAF Sensor, Right Side Of Engine Connector End View (B2/3)
        • Left ME-SFI [ME] Control Unit Connector End View (N3/11)
        • Left O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/5)
        • Left O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/3)
        • Left Taillamp Connector End View (E3)
        • Left Turn Signal Lamp Connector End View (E6/1)
        • LH-SFI [LH] Control Unit Connector End View (N3/1)
        • Manual Transmission/Engine Connector (4-Pin) Connector End View (X22/4)
        • MB-Info And Breakdown Assistance Button Group Connector End View (S93/6)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 1)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 2)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. A)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. B)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. C)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. D)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. E)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. F)
        • Module Box Separation Point/Taillamp Wiring Harness Connector End View (X35/15)
        • Module Box/Engine Separation Point Connector End View (X35/26)
        • Module Box/Taillamp Wiring Harness Separation Point (13-Pin) Connector End View (X35/16)
        • MSC [ESL] Control Unit (With Memory) Connector End View (N32/9)
        • Multifunction Block Connector Connector End View (X30/1)
        • O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/1)
        • O2 Sensor Heater Downstream Of TWC [KAT] Relay Connector End View (K35)
        • O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/2)
        • Outside Mirror Switch With Mirror Fold-In/Fold-Out Facility Connector End View (S50/1)
        • Outside/Inside Rearview Mirror Switch Connector End View (S50)
        • Overvoltage Protection Relay, Circuit 87E/87L/30a (9-Pin) (Series K1/1) Connector End View (K1/2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 1)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. X, Conn. Z)
        • Power Soft Top Control Unit Connector End View (N52, Conn. Y)
        • Radio Connector End View (A2, Conn. 1)
        • Radio Connector End View (A2, Conn. A, Conn. B)
        • Radio Control Panel Connector End View (A2/4)
        • Rear Axle Level Sensor Connector End View (B22/3)
        • Rear Axle Level Sensor Connector End View (X33/9)
        • Rear Axle Multiple Circuit Junction Connector End View (X62/8)
        • Receiver/Amplifier (In Trunk) Connector End View (A2/3)
        • Right DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/5)
        • Right EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Left Of Engine Connector End View (M16/3)
        • Right Electrically Adjustable And Heated Outside Mirror Connector End View (M21/2)
        • Right Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/6)
        • Right Front ESA Switch Group (With Memory) Connector End View (S92)
        • Right Front Lamp Unit Connector End View (E2)
        • Right Front Power Window Motor Connector End View (M10/4)
        • Right Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Right Front Seat Adjustment Control Unit With Memory Connector End View (N32/2)
        • Right Front Seat Contacting Strip Connector End View (X55/4)
        • Right Front Seat Heater Switch Connector End View (S51/2)
        • Right Headlamp Wiper Motor Connector End View (M6/3)
        • Right Hot Wire MAF Sensor, Left Side Of Engine Connector End View (B2/4)
        • Right ME-SFI [ME] Control Unit Connector End View (N3/12)
        • Right O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/6)
        • Right O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/4)
        • Right Taillamp Connector End View (E4)
        • Right Turn Signal Lamp Connector End View (E6/2)
        • Roll Bar (RB [URB]) Control Unit - Crash Deployment Connector End View (N53)
        • Rotary Light Switch Connector End View (S1)
        • Seat Belt Warning Module Connector End View (N2/4)
        • SRS Test Connector (10-Pin) Connector End View (X11/13)
        • Starter Lock-Out And Back-Up Lamp Switch Connector End View (S16/1)
        • Starter Lock-Out And Back-Up Lamp Switch/Selector Lever Position Recognition Connector End View (S16/3)
        • Starter Lockout Relay Connector End View (K38/3)
        • Starter Wiring Harness Connector (5-Pin) Connector End View (X27)
        • Steering Angle Sensor Connector End View (N49)
        • Steering Column Adjustment Control Unit/Motor Connector (8-Pin) Connector End View (X54/7)
        • Telephone Control (Eyeglass Compartment) Connector End View (A35/3)
        • Telephone Handset Connector End View (A34/1)
        • Telephone Transmitter/Receiver Connector End View (A34)
        • Telephone Transmitter/Receiver Connector End View (A35)
        • Temperature Sensor Connector End View (B10/4)
        • Traction System Hydraulic Unit Connector End View (A7/3)
        • Transmission Control Unit (TCU) (5-Speed Automatic) Connector End View (N15/1)
        • Transmission Mode 'B' Engagement Switch Connector End View (S16/8)
        • Transmitter/Receiver Operating Unit/Plug Distributor Separation Point (12-Pin) Connector End View (X39/10)
        • Wiper Motor Connector End View (X88/2)
        • Wiper System Relay Connector End View (K26)
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
  • Charging Systems
    • Electrical System - Engine -- 129 Chassis
      • General Information
        • Notes on avoiding damage to ignition system - AH15.10-P-0002
          • Notes on avoiding damage to ignition system - AH15.10-P-0002-01D
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01E
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01F
        • General notes on contactless high voltage distribution - AH15.10-P-1002
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WA
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WD
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WE
        • General notes on testing contactless high voltage distribution - AH15.10-P-1003-01W
      • Safety Precautions
        • Risk of death caused by contact with parts conducting high voltages. - AS15.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9104AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9113AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9119AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9120AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9129AA
        • Remove, install camshaft Hall sensor - AR15.10-P-2000A
        • Test rotorless high voltage distribution - AR15.10-P-3000
          • Test rotorless high voltage distribution - AR15.10-P-3000WA
          • Test rotorless high voltage distribution - AR15.10-P-3000WD
          • Test rotorless high voltage distribution - AR15.10-P-3000WE
        • Replacing ignition cables with M3 cable screw - AR15.12-P-0512G
        • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928E
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928F
        • Removing and installing ignition coils - AR15.12-P-2003
          • Remove/install ignition coils - AR15.12-P-2003A
          • Removing and installing ignition coils - AR15.12-P-2003E
          • Removing and installing ignition coils - AR15.12-P-2003EA
          • Removing and installing ignition coils - AR15.12-P-2003F
          • Removing and installing ignition coils - AR15.12-P-2003FA
          • Remove/install ignition coils - AR15.12-P-2003G
        • Removing and installing crankshaft position sensor - AR15.12-P-2133
          • Remove/install crankshaft position sensor - AR15.12-P-2133A
          • Removing and installing crankshaft position sensor - AR15.12-P-2133E
          • Removing and installing crankshaft position sensor - AR15.12-P-2133EA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133F
          • Removing and installing crankshaft position sensor - AR15.12-P-2133FA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133G
        • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143
          • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143E
            • Notes
            • Checking, adjusting clearance of camshaft position sensor/camshaft sprocket segment - AR15.12-P-2143-01A
          • Removing and installing, adjustable camshaft position sensor - AR15.12-P-2143G
        • Replacing knock sensor - AR15.12-P-2183G
        • Remove/install knock sensors - AR15.12-P-2184
          • Remove/install knock sensors - AR15.12-P-2184A
          • Remove/install knock sensors - AR15.12-P-2184E
          • Remove/install knock sensors - AR15.12-P-2184EA
          • Remove/install knock sensors - AR15.12-P-2184F
        • Servicing wiring harness - AR15.18-P-0500A
        • Removing and installing starter - AR15.30-P-7100
          • Removing and installing starter - AR15.30-P-7100C
          • Remove starter, install - AR15.30-P-7100CS
          • Removing and installing starter - AR15.30-P-7100EC
        • Prerequisites for testing alternator - AR15.40-P-5009C
        • Checking regulation voltage of alternator - AR15.40-P-5010C
        • Testing alternator charging current - AR15.40-P-5011C
        • Removing and installing generator - AR15.40-P-5032
          • Removing and installing generator - AR15.40-P-5032CA
          • Removing and installing generator - AR15.40-P-5032CS
          • Remove and install generator - AR15.40-P-5032CT
        • Remove/install generator pulleys - AR15.40-P-5710
          • Removing and installing the generator poly-V-pulley - AR15.40-P-5710CS
          • Remove/install generator belt pulley - AR15.40-P-5710GF
        • Removing and installing regulator of generator - AR15.40-P-5760CS
        • Test diodes of generator - AR15.40-P-9301-02EA
      • Maintenance
        • Replace spark plugs - AP15.10-P-1580
          • Replace spark plugs - AP15.10-P-1580AC
          • Replace spark plugs - AP15.10-P-1580CA
      • Retrofitting & Conversion
        • Retrofitting smaller poly V-belt pulley and aluminum fan wheel - AN15.40-P-5700CS
      • Repair & Adjustments
        • Replacing ignition cables with M3 cable screw - RA15001040512X(15-0512)
        • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing Spark Plugs - RA15001191031X(15-1031)
        • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and Installing Ignition Coils - RA15001192001X(15-2001)
        • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and Installing EZL/AKR Control Unit - RA15001192093X(15-2093)
        • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and Installing Crankshaft Position Sensor - RA15001192133X(15-2133)
        • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and Installing Camshaft Position Sensor - RA15001192143X(15-2143)
        • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
          • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
        • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing Knock Sensors - RA15001192183X(15-2183)
          • Removing and Installing EZL/AKR Resistance Trimming Coupling - RA15001192153X(15-2153)
        • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and Installing Engine Systems Control Unit (MAS) - RA15001192193X(15-2193)
        • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and Installing High Voltage Distributor - RA15001193010X(15-3010)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA15001045TA00X
        • Replacing Ignition Cables with M3 Cable Screw - RA15001191476X(15-1476)
        • Technical Modifications Engine 119 Combustion KE Injection - RA1500119TA00X
        • Notes regarding working on breakerless ignition system - RA1500FLH0010X(15-0010)
        • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3A020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3B020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3C020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3D020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3E020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3F020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3I020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3K020X(15-0020)
        • Function of breakerless transistorized ignition system without series resistors with hybrid ignition control unit (TSZ) - RA1500KE20015X(15-0015)
        • Engine systems control unit (MAS) - RA1500KE30030X(15-0030)
        • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3B025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3C025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3D025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3E025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3F025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3G025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3H025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3I025X(15-0025)
          • RA1500KE3J025X
      • Component Modifications
        • High voltage distributor cap, high voltage distributor rotor - BT15.12-P-0001-01A
        • High voltage distributor rotor with stiffening ribs - BT15.12-P-0002-01A
    • Generators & Regulators
      • Description
      • Adjustments
      • Trouble Shooting
      • On-Vehicle Testing
        • Wiring Continuity
        • Generator Output
        • Voltage Regulator Control
      • Removal & Installation
        • Generator
          • Removal & Installation (E300)
          • Removal & Installation (Except E300)
        • Voltage Regulator
          • Removal & Installation
      • Overhaul
      • Torque Specifications
      • Wiring Diagrams
    • Generators & Regulators - 129 Chassis
      • Identification
      • Description
      • Adjustments
        • Notes
        • Drive Belt Routing
      • Trouble Shooting
        • Preliminary Inspection
      • Service Precautions
        • Battery Disconnect/Connect
          • Disconnect Procedures
          • Connect Procedures
        • Basic Programming
          • Notes
          • Normalizing Power Windows
          • Normalizing Memory Power Seats, Steering Column & Outside Mirror
          • Normalizing Tilting/Sliding Roof
          • Setting Time
      • Testing
      • Retrieving & Erasing Diagnostic Trouble Codes
        • Notes
        • Retrieving Diagnostic Trouble Codes
        • Clearing Diagnostic Trouble Codes
        • Fault Code Diagnosis Equipment Connection
      • On-Vehicle Testing
        • Wiring Continuity
        • Generator Output
        • Voltage Regulator Control
        • Diode Test
      • Removal & Installation
        • Generator
          • Notes
          • Removal & Installation
        • Voltage Regulator
          • Notes
          • Removal & Installation (Compact Generator)
          • Removal & Installation (Bowl-Type Generator)
      • Torque Specifications
      • Wiring Diagrams
  • Component Locations
    • Diagnostic Connector (DLC) Locations
      • Domestic Cars
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Domestic Light Trucks & Vans
        • CHRYSLER Group LLC
        • Ford Motor Co.
        • General Motors
      • Imported Cars & Trucks
        • ACURA
        • AUDI
        • BENTLEY
        • BMW
        • DAIHATSU
        • CHRYSLER Group LLC
        • FERRARI
        • Ford Motor Co.
        • General Motors
        • HONDA
        • HYUNDAI
        • INFINITI
        • ISUZU
        • Jaguar
        • KIA
        • Land Rover
        • LEXUS
        • MAZDA
        • MERCEDES-BENZ
        • MITSUBISHI
        • NISSAN
        • PEUGEOT
        • PORSCHE
        • RENAULT
        • Rolls-ROYCE
        • SAAB
        • SUBARU
        • SUZUKI
        • TOYOTA
        • VOLKSWAGEN
        • VOLVO
    • Electrical Component Locator
      • Buzzers, Relays & Timers
      • Circuit Protection Devices
      • Control Units
      • Motors
      • Sending Units & Sensors
      • Solenoids & Solenoid Valves
      • Switches
      • Miscellaneous
      • Component Location Graphics
  • Fuses & Circuit Breakers
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
  • Gauges
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
    • Instrument Panels - Cl500, CLK320, CLK430, S320, S420, S430, S500 & SL500
      • Description
        • Cl & S Class
        • SL Class
      • Operation
        • Abs Malfunction Indicator Light
        • Airbag Off Indicator Light
        • BAS/Esp Malfunction Indicator Light
          • SL Class
        • Brake Pad Wear Indicator Light
          • SL Class
        • Brake Warning Light
        • Check Engine Indicator Light
        • Electronic Stability Program (Esp) Warning Light
        • Exterior Light Failure Indicator Light
          • Notes
          • SL Class
        • Flexible System Service (FSS) Indicator
          • CL & S Class
          • SL Class
        • Headlight Switch
        • Low Engine Oil & Coolant Warning
        • Low Fuel & Fuel Cap Placement Warning Light
        • Roll Bar Warning Light
          • SL Class
        • Supplemental Restraint System (SRS) Warning Light
      • Programming
        • Resetting Flexible System Service (FSS) Indicator
          • CL & S Class
          • SL Class
        • Enabling Code Function For Radio
          • Notes
          • SL Class
        • Reactivating Steering Angle Sensor
      • System Tests
      • Removal & Installation
        • Notes
        • Light Module
          • Notes
          • Removal & Installation (CL Class)
          • Removal & Installation (S Class)
        • Instrument Cluster
          • Removal & Installation (CL & S Class)
          • Removal & Installation (SL Class)
  • Horns
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
  • Motors, Switches, Relays
    • Electrical System, Equipment & Instructions -- 129 Chassis
      • General Information
        • Notes on battery - AH54.10-P-0001-01A
      • Basic Knowledge
        • CAN data bus, function - GF54.00-P-0005A
          • Notes
          • CAN data bus data telegram - GF54.00-P-0005-01A
          • CAN data bus specification - GF54.00-P-0005-02A
          • CAN data bus fault recognition - GF54.00-P-0005-03A
          • CAN data bus applications - GF54.00-P-0005-04A
        • Fuse and relay box, build condition - GF54.15-P-0800CS
        • Fuse and relay box, fuse assignment relay holder - GF54.15-P-1255-18CS
        • Bulb failure indicator light, function - GF54.15-P-1520CS
        • Instrument cluster (IC), function - GF54.30-P-0002A
          • Notes
          • Instrument cluster (IC), block diagram - GF54.30-P-0002-01A
          • Instrument cluster (IC), location of components - GF54.30-P-0002-04A
        • Charge indicator lamp, exterior lamp failure - GF54.30-P-3007A
        • Instrument/display illumination, location/task/function - GF54.30-P-3008A
      • Safety Precautions
        • Risk of explosion from gas. Risk of poisoning and burns from swallowing battery electrolyte. Risk of injury to eyes and skin as result of caustic burns from battery electrolyte or from handling damaged lead-acid batteries. - AS54.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9129AA
        • Disconnect/connect battery's ground cable - AR54.10-P-0003A
        • Removing and installing battery - AR54.10-P-0005EA
        • Treatment of battery if vehicle taken out of service - AR54.10-P-0006EA
        • Check quiescent current consumption - AR54.10-P-1030AB
          • Notes
          • Preparing test with quiescent current retention device - AR54.10-P-1030-01AB
          • Preparing test without quiescent current retention device - AR54.10-P-1030-02AB
          • Testing quiescent current - AR54.10-P-1030-03AB
          • Testing quiescent current - AR54.10-P-1030-03CS
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04AB
          • Determining circuit with increased quiescent current consumption - AR54.10-P-1030-04CS
          • Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06AB
        • Check battery; - AR54.10-P-1129-01A
        • Charge battery - AR54.10-P-1130Z
        • Removing and installing fuse and relay box - AR54.15-P-1255
          • Removing and installing fuse and relay box - AR54.15-P-1255CS
          • Removing and installing fuse and relay box - AR54.15-P-1255CT
            • Notes
            • Disconnecting wiring at the fuse boxes or fuse blocks - AR54.15-P-1255-01CT
        • Removing and installing relays and control modules - AR54.15-P-1300CS
          • Notes
          • Removing and installing control modules - AR54.15-P-1300-02CS
        • Removing and installing daytime running lamp relay - AR54.15-P-9998CS
        • Repairing wiring harness using soldered terminal sleeve - AR54.18-P-0100-02A
        • Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
          • Notes
          • Checking wiring harness - AR54.18-P-0600-01A
        • Removing and installing control module box - AR54.20-P-1257CS
        • Removing and installing blower motor for module box - AR54.20-P-2350CS
        • Removing and installing blower motor for control module box - AR54.20-P-2351CS
        • Removing, installing module box - AR54.20-P-2360CS
        • Flashing control unit - AR54.21-P-0012-06A
        • Removing and installing combination switch - AR54.25-P-2800CS
        • Removing and installing switch in center console - AR54.25-P-3190CS
        • Removing and installing instrument cluster - AR54.30-P-6015EA
          • Notes
          • Withdrawing instrument cluster - AR54.30-P-6015-01Z
        • Removing and installing instrument cluster housing - AR54.30-P-6031CS
        • Removing and installing electronic plate - AR54.30-P-6040CS
        • Removing and installing bulbs in instrument cluster - AR54.30-P-6049CS
        • Checking exterior lamp failure indicator - AR54.30-P-6070CS
        • Removing and installing display instruments in instrument cluster - AR54.30-P-6111CS
        • Removing and installing outside temperature sensor - AR54.30-P-6341
          • Removing and installing outside temperature sensor - AR54.30-P-6341CS
          • Removing and installing outside temperature sensor - AR54.30-P-6341CT
      • Repair & Adjustments
        • Function of trip computer - RA54001070415X(54-415)
        • Information for troubleshooting - RA54001070418X(54-418)
        • Checking function of trip computer - RA54001070420X(54-420)
        • Adapting fuel consumption display - RA54001070424X(54-424)
        • Removing and installing trip computer keyboard - RA54001070430X(54-430)
        • Removing and installing trip computer control unit with display, models 129 and 140 - RA54001070433X(54-433)
        • Renewing bulbs in keyboard and display unit - RA54001070439X(54-439)
      • Miscellaneous Notes
        • Dispose of battery - OS54.10-P-0001-01Z
    • OEM Connector End Views -- 129 Chassis
      • Connector End Views
        • 5-Speed AT/Engine Connector End View (X22/5)
        • AAC [KLA] Control And Operating Unit Connector End View (N22)
        • AAC/TAC [KLA/TAU] Center And Side Air Outlet Control System Connector End View (N18/2)
        • ABS Control Module Connector End View (N30)
        • ABS Hydraulic Unit Connector End View (A7)
        • ABS/ASR Control Module Connector End View (N30/1)
        • AC Wiring Harness And Engine Wiring Harness Connector End View (X85/1)
        • Accelerator Pedal Sensor Connector End View (B37)
        • ADS Comfort/Sport Switch Connector End View (S45/1)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/5)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/6)
        • ADS/Engine-Chassis Connector End View (X33/15)
        • ADS/Suspension Control Unit Connector End View (N51)
        • Air Injection Relay Connector End View (K17)
        • Amplifier For Sound System Connector End View (N40/3)
        • ASD Control Module Connector End View (N30/2)
        • ASR/SPS [PML] Control Unit Connector End View (N47-1)
        • ATA [EDW] Control Unit Connector End View (N26)
        • Automatic Antenna Connector End View (M11)
        • Automatic Transmission/Engine Connector (8-Pin) Connector End View (X22/2)
        • BAS Control Unit Connector End View (N48)
        • Base Module (GM) Connector End View (N16/1)
        • CC/ISC [TPM/LLR] Actuator Connector End View (M16/2)
        • CD Player With Changer (In Trunk) Connector End View (A2/6)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (K24)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (M14/1)
        • Cockpit/Module Box Separation Point (18-Pin) Connector End View (X35/7)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/15)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/16)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/26)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/63)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/7)
        • Combination Relay (Turn Signal Indicators With Trailer Hitch, Heated Rear Window, Wiper Motor, ATA [EDW]) Connector End View (N10/2)
        • Combination Relay (Turn Signal Indicators, Heated Rear Window, Wiper Motor) Connector End View (N10)
        • Combination Switch Connector End View (S4)
        • Comfort Shift Relay Connector End View (H7)
        • Comfort Shift Relay Connector End View (K24)
        • Control Unit Box/Engine Separation Point Connector End View (X35/63)
        • Cruise Control (CC [TPM])/Idle Speed Control (ISC [LLR]) Control Unit Connector End View (N4/3)
        • CTEL Transmitter-Receiver Junction Box (12-Pole) Connector End View (X39/11)
        • CTEL Transmitter-Receiver/Voice Activation Module Connector End View (A35/10)
        • DAS [FBS] Radio Frequency/Infrared Control Unit Connector End View (N54/4)
        • Data Link Connector End View (X11/4)
        • Daytime Running Lamp Control Unit Connector End View (N35)
        • DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/3)
        • Diagnosis II Test Connector End View (X11/22)
        • Diagnostic Module (OBD I) Connector End View (N59)
        • Diagnostic Module (OBD II) Connector End View (N59/1)
        • Dome Lamp With Shut-Off Delay And Reading Lamp Connector End View (E15)
        • Drive Authorization System Infrared Control Unit Connector End View (N54/1)
        • E-Call/Taillamp Wiring Harness Connector End View (X18/32)
        • EA/CC/ISC [EFP/TPM/LLR] Actuator Connector End View (M16/1)
        • EA/CC/ISC [EFP/TPM/LLR] Control Unit Connector End View (N4/1)
        • Electrically Adjustable Inside Rearview Mirror With Memory Connector End View (M21/3)
        • Electronic Mirror Dimming Connector End View (H7)
        • Emergency Tensioning Retractor (ETR [GUS]) With Airbag (AB) Control Unit Connector End View (N2/2)
        • Engine Separation Point Connector End View (X26/2)
        • Engine Systems Control Unit (ESCU [MAS]) Connector End View (N16)
        • ESP Yaw Rate Sensor Connector End View (N64)
        • ESP, SPS [PML] And BAS Control Unit Connector End View (N47-5)
        • ETC [EGS] Control Unit Connector End View (N15/3)
        • ETS/SPS [PML] Control Unit Connector End View (N47-2)
        • Fanfare Horn Relay Connector End View (K39)
        • Front ATA [EDW]/Rear ATA [EDW] Connector (4-Pin) Connector End View (X42)
        • Front Axle Level Sensor Connector End View (B22/2)
        • Fuel Pump Relay Connector End View (K27)
        • Gear Recognition Switch (Voltage Coded) Connector End View (S16/10)
        • Hands-Free System, Radio/Telephone Speaker Selection Relay Connector End View (A35/2)
        • Hazard Warning Flasher And CL [ZV] Switch Group Connector End View (S6)
        • HeadLamp Cleaning System (HCS [SRA]) Relay Connector End View (K2)
        • HeadLamp Harness Connector End View (X24)
        • Headlamp Range Adjustment Control Unit Connector End View (N71)
        • Heated Rear Window Switch Connector End View (S14)
        • Heating Systems, Automatic Heater, Tempmatic, Automatic Air Conditioning (HEAT [HAU], TAC [TAU], AAC [KLA])/Interior Connector (12-Pin) Connector End View (X85/2)
        • HFM-SFI [HFM] Control Unit Connector End View (N3/4)
        • Hot Film Mass Air Flow Sensor Connector End View (B2/5)
        • Hot Film Mass Air Flow Sensor Connector End View (M16/2)
        • Hot Wire Mass Air Flow Sensor Connector End View (B2/2)
        • Ignition/Starter Switch Connector End View (N16/1)
        • Ignition/Starter Switch Connector End View (S2/1)
        • Immobilizer Relay Connector End View (K38)
        • In-Car Temperature Sensor Connector End View (B10/4)
        • Infrared Remote Central Locking (IRCL [IFZ]) Control Unit Connector End View (N54)
        • Injection System Control Unit Connector End View (N3)
        • Instrument Cluster Connector End View (A1)
        • Interior And Taillamp Wiring Harness Connector (12-Pin) Connector End View (X18)
        • Interior/Engine Connector (12-Pin) Connector End View (X26)
        • Interior/Taillamp Harness Connector End View (X18/3)
        • Interior/Transmission Connector End View (X26/12)
        • Kickdown Switch (2nd Transmission Mode) Connector End View (S16/7)
        • Kickdown Switch Connector End View (S16/6)
        • Lamp Monitoring Unit Connector End View (N7)
        • Left DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/4)
        • Left EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Right Of Engine Connector End View (M16/4)
        • Left Electrically Adjustable And Heated Outside Mirror Connector End View (M21/1)
        • Left Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/7)
        • Left Front ESA Switch Group (With Memory) Connector End View (S91)
        • Left Front Lamp Unit Connector End View (E1)
        • Left Front Power Window Motor Connector End View (M10/3)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/1)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Left Front Seat Adjustment Control Unit With Memory Connector End View (N32/1)
        • Left Front Seat Contacting Strip Connector End View (X55/3)
        • Left Front Seat Heater Switch Connector End View (S51/1)
        • Left Headlamp Wiper Motor Connector End View (M6/2)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/6)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/7)
        • Left Hot Wire MAF Sensor, Right Side Of Engine Connector End View (B2/3)
        • Left ME-SFI [ME] Control Unit Connector End View (N3/11)
        • Left O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/5)
        • Left O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/3)
        • Left Taillamp Connector End View (E3)
        • Left Turn Signal Lamp Connector End View (E6/1)
        • LH-SFI [LH] Control Unit Connector End View (N3/1)
        • Manual Transmission/Engine Connector (4-Pin) Connector End View (X22/4)
        • MB-Info And Breakdown Assistance Button Group Connector End View (S93/6)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 1)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 2)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. A)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. B)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. C)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. D)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. E)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. F)
        • Module Box Separation Point/Taillamp Wiring Harness Connector End View (X35/15)
        • Module Box/Engine Separation Point Connector End View (X35/26)
        • Module Box/Taillamp Wiring Harness Separation Point (13-Pin) Connector End View (X35/16)
        • MSC [ESL] Control Unit (With Memory) Connector End View (N32/9)
        • Multifunction Block Connector Connector End View (X30/1)
        • O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/1)
        • O2 Sensor Heater Downstream Of TWC [KAT] Relay Connector End View (K35)
        • O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/2)
        • Outside Mirror Switch With Mirror Fold-In/Fold-Out Facility Connector End View (S50/1)
        • Outside/Inside Rearview Mirror Switch Connector End View (S50)
        • Overvoltage Protection Relay, Circuit 87E/87L/30a (9-Pin) (Series K1/1) Connector End View (K1/2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 1)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. X, Conn. Z)
        • Power Soft Top Control Unit Connector End View (N52, Conn. Y)
        • Radio Connector End View (A2, Conn. 1)
        • Radio Connector End View (A2, Conn. A, Conn. B)
        • Radio Control Panel Connector End View (A2/4)
        • Rear Axle Level Sensor Connector End View (B22/3)
        • Rear Axle Level Sensor Connector End View (X33/9)
        • Rear Axle Multiple Circuit Junction Connector End View (X62/8)
        • Receiver/Amplifier (In Trunk) Connector End View (A2/3)
        • Right DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/5)
        • Right EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Left Of Engine Connector End View (M16/3)
        • Right Electrically Adjustable And Heated Outside Mirror Connector End View (M21/2)
        • Right Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/6)
        • Right Front ESA Switch Group (With Memory) Connector End View (S92)
        • Right Front Lamp Unit Connector End View (E2)
        • Right Front Power Window Motor Connector End View (M10/4)
        • Right Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Right Front Seat Adjustment Control Unit With Memory Connector End View (N32/2)
        • Right Front Seat Contacting Strip Connector End View (X55/4)
        • Right Front Seat Heater Switch Connector End View (S51/2)
        • Right Headlamp Wiper Motor Connector End View (M6/3)
        • Right Hot Wire MAF Sensor, Left Side Of Engine Connector End View (B2/4)
        • Right ME-SFI [ME] Control Unit Connector End View (N3/12)
        • Right O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/6)
        • Right O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/4)
        • Right Taillamp Connector End View (E4)
        • Right Turn Signal Lamp Connector End View (E6/2)
        • Roll Bar (RB [URB]) Control Unit - Crash Deployment Connector End View (N53)
        • Rotary Light Switch Connector End View (S1)
        • Seat Belt Warning Module Connector End View (N2/4)
        • SRS Test Connector (10-Pin) Connector End View (X11/13)
        • Starter Lock-Out And Back-Up Lamp Switch Connector End View (S16/1)
        • Starter Lock-Out And Back-Up Lamp Switch/Selector Lever Position Recognition Connector End View (S16/3)
        • Starter Lockout Relay Connector End View (K38/3)
        • Starter Wiring Harness Connector (5-Pin) Connector End View (X27)
        • Steering Angle Sensor Connector End View (N49)
        • Steering Column Adjustment Control Unit/Motor Connector (8-Pin) Connector End View (X54/7)
        • Telephone Control (Eyeglass Compartment) Connector End View (A35/3)
        • Telephone Handset Connector End View (A34/1)
        • Telephone Transmitter/Receiver Connector End View (A34)
        • Telephone Transmitter/Receiver Connector End View (A35)
        • Temperature Sensor Connector End View (B10/4)
        • Traction System Hydraulic Unit Connector End View (A7/3)
        • Transmission Control Unit (TCU) (5-Speed Automatic) Connector End View (N15/1)
        • Transmission Mode 'B' Engagement Switch Connector End View (S16/8)
        • Transmitter/Receiver Operating Unit/Plug Distributor Separation Point (12-Pin) Connector End View (X39/10)
        • Wiper Motor Connector End View (X88/2)
        • Wiper System Relay Connector End View (K26)
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
  • Starter
    • Electrical System - Engine -- 129 Chassis
      • General Information
        • Notes on avoiding damage to ignition system - AH15.10-P-0002
          • Notes on avoiding damage to ignition system - AH15.10-P-0002-01D
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01E
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01F
        • General notes on contactless high voltage distribution - AH15.10-P-1002
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WA
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WD
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WE
        • General notes on testing contactless high voltage distribution - AH15.10-P-1003-01W
      • Safety Precautions
        • Risk of death caused by contact with parts conducting high voltages. - AS15.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9104AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9113AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9119AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9120AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9129AA
        • Remove, install camshaft Hall sensor - AR15.10-P-2000A
        • Test rotorless high voltage distribution - AR15.10-P-3000
          • Test rotorless high voltage distribution - AR15.10-P-3000WA
          • Test rotorless high voltage distribution - AR15.10-P-3000WD
          • Test rotorless high voltage distribution - AR15.10-P-3000WE
        • Replacing ignition cables with M3 cable screw - AR15.12-P-0512G
        • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928E
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928F
        • Removing and installing ignition coils - AR15.12-P-2003
          • Remove/install ignition coils - AR15.12-P-2003A
          • Removing and installing ignition coils - AR15.12-P-2003E
          • Removing and installing ignition coils - AR15.12-P-2003EA
          • Removing and installing ignition coils - AR15.12-P-2003F
          • Removing and installing ignition coils - AR15.12-P-2003FA
          • Remove/install ignition coils - AR15.12-P-2003G
        • Removing and installing crankshaft position sensor - AR15.12-P-2133
          • Remove/install crankshaft position sensor - AR15.12-P-2133A
          • Removing and installing crankshaft position sensor - AR15.12-P-2133E
          • Removing and installing crankshaft position sensor - AR15.12-P-2133EA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133F
          • Removing and installing crankshaft position sensor - AR15.12-P-2133FA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133G
        • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143
          • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143E
            • Notes
            • Checking, adjusting clearance of camshaft position sensor/camshaft sprocket segment - AR15.12-P-2143-01A
          • Removing and installing, adjustable camshaft position sensor - AR15.12-P-2143G
        • Replacing knock sensor - AR15.12-P-2183G
        • Remove/install knock sensors - AR15.12-P-2184
          • Remove/install knock sensors - AR15.12-P-2184A
          • Remove/install knock sensors - AR15.12-P-2184E
          • Remove/install knock sensors - AR15.12-P-2184EA
          • Remove/install knock sensors - AR15.12-P-2184F
        • Servicing wiring harness - AR15.18-P-0500A
        • Removing and installing starter - AR15.30-P-7100
          • Removing and installing starter - AR15.30-P-7100C
          • Remove starter, install - AR15.30-P-7100CS
          • Removing and installing starter - AR15.30-P-7100EC
        • Prerequisites for testing alternator - AR15.40-P-5009C
        • Checking regulation voltage of alternator - AR15.40-P-5010C
        • Testing alternator charging current - AR15.40-P-5011C
        • Removing and installing generator - AR15.40-P-5032
          • Removing and installing generator - AR15.40-P-5032CA
          • Removing and installing generator - AR15.40-P-5032CS
          • Remove and install generator - AR15.40-P-5032CT
        • Remove/install generator pulleys - AR15.40-P-5710
          • Removing and installing the generator poly-V-pulley - AR15.40-P-5710CS
          • Remove/install generator belt pulley - AR15.40-P-5710GF
        • Removing and installing regulator of generator - AR15.40-P-5760CS
        • Test diodes of generator - AR15.40-P-9301-02EA
      • Maintenance
        • Replace spark plugs - AP15.10-P-1580
          • Replace spark plugs - AP15.10-P-1580AC
          • Replace spark plugs - AP15.10-P-1580CA
      • Retrofitting & Conversion
        • Retrofitting smaller poly V-belt pulley and aluminum fan wheel - AN15.40-P-5700CS
      • Repair & Adjustments
        • Replacing ignition cables with M3 cable screw - RA15001040512X(15-0512)
        • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing Spark Plugs - RA15001191031X(15-1031)
        • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and Installing Ignition Coils - RA15001192001X(15-2001)
        • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and Installing EZL/AKR Control Unit - RA15001192093X(15-2093)
        • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and Installing Crankshaft Position Sensor - RA15001192133X(15-2133)
        • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and Installing Camshaft Position Sensor - RA15001192143X(15-2143)
        • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
          • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
        • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing Knock Sensors - RA15001192183X(15-2183)
          • Removing and Installing EZL/AKR Resistance Trimming Coupling - RA15001192153X(15-2153)
        • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and Installing Engine Systems Control Unit (MAS) - RA15001192193X(15-2193)
        • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and Installing High Voltage Distributor - RA15001193010X(15-3010)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA15001045TA00X
        • Replacing Ignition Cables with M3 Cable Screw - RA15001191476X(15-1476)
        • Technical Modifications Engine 119 Combustion KE Injection - RA1500119TA00X
        • Notes regarding working on breakerless ignition system - RA1500FLH0010X(15-0010)
        • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3A020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3B020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3C020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3D020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3E020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3F020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3I020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3K020X(15-0020)
        • Function of breakerless transistorized ignition system without series resistors with hybrid ignition control unit (TSZ) - RA1500KE20015X(15-0015)
        • Engine systems control unit (MAS) - RA1500KE30030X(15-0030)
        • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3B025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3C025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3D025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3E025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3F025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3G025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3H025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3I025X(15-0025)
          • RA1500KE3J025X
      • Component Modifications
        • High voltage distributor cap, high voltage distributor rotor - BT15.12-P-0001-01A
        • High voltage distributor rotor with stiffening ribs - BT15.12-P-0002-01A
  • Wiring Diagrams
    • OEM Connector End Views -- 129 Chassis
      • Connector End Views
        • 5-Speed AT/Engine Connector End View (X22/5)
        • AAC [KLA] Control And Operating Unit Connector End View (N22)
        • AAC/TAC [KLA/TAU] Center And Side Air Outlet Control System Connector End View (N18/2)
        • ABS Control Module Connector End View (N30)
        • ABS Hydraulic Unit Connector End View (A7)
        • ABS/ASR Control Module Connector End View (N30/1)
        • AC Wiring Harness And Engine Wiring Harness Connector End View (X85/1)
        • Accelerator Pedal Sensor Connector End View (B37)
        • ADS Comfort/Sport Switch Connector End View (S45/1)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/5)
        • ADS Connector, Front/Rear Suspension Connector End View (X33/6)
        • ADS/Engine-Chassis Connector End View (X33/15)
        • ADS/Suspension Control Unit Connector End View (N51)
        • Air Injection Relay Connector End View (K17)
        • Amplifier For Sound System Connector End View (N40/3)
        • ASD Control Module Connector End View (N30/2)
        • ASR/SPS [PML] Control Unit Connector End View (N47-1)
        • ATA [EDW] Control Unit Connector End View (N26)
        • Automatic Antenna Connector End View (M11)
        • Automatic Transmission/Engine Connector (8-Pin) Connector End View (X22/2)
        • BAS Control Unit Connector End View (N48)
        • Base Module (GM) Connector End View (N16/1)
        • CC/ISC [TPM/LLR] Actuator Connector End View (M16/2)
        • CD Player With Changer (In Trunk) Connector End View (A2/6)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (K24)
        • Central Locking (CL [ZV]) And Vacuum Supply Pump Connector End View (M14/1)
        • Cockpit/Module Box Separation Point (18-Pin) Connector End View (X35/7)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/15)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/16)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/26)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/63)
        • Cockpit/Module Or Control Unit Box Separation Point Connector End View (X35/7)
        • Combination Relay (Turn Signal Indicators With Trailer Hitch, Heated Rear Window, Wiper Motor, ATA [EDW]) Connector End View (N10/2)
        • Combination Relay (Turn Signal Indicators, Heated Rear Window, Wiper Motor) Connector End View (N10)
        • Combination Switch Connector End View (S4)
        • Comfort Shift Relay Connector End View (H7)
        • Comfort Shift Relay Connector End View (K24)
        • Control Unit Box/Engine Separation Point Connector End View (X35/63)
        • Cruise Control (CC [TPM])/Idle Speed Control (ISC [LLR]) Control Unit Connector End View (N4/3)
        • CTEL Transmitter-Receiver Junction Box (12-Pole) Connector End View (X39/11)
        • CTEL Transmitter-Receiver/Voice Activation Module Connector End View (A35/10)
        • DAS [FBS] Radio Frequency/Infrared Control Unit Connector End View (N54/4)
        • Data Link Connector End View (X11/4)
        • Daytime Running Lamp Control Unit Connector End View (N35)
        • DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/3)
        • Diagnosis II Test Connector End View (X11/22)
        • Diagnostic Module (OBD I) Connector End View (N59)
        • Diagnostic Module (OBD II) Connector End View (N59/1)
        • Dome Lamp With Shut-Off Delay And Reading Lamp Connector End View (E15)
        • Drive Authorization System Infrared Control Unit Connector End View (N54/1)
        • E-Call/Taillamp Wiring Harness Connector End View (X18/32)
        • EA/CC/ISC [EFP/TPM/LLR] Actuator Connector End View (M16/1)
        • EA/CC/ISC [EFP/TPM/LLR] Control Unit Connector End View (N4/1)
        • Electrically Adjustable Inside Rearview Mirror With Memory Connector End View (M21/3)
        • Electronic Mirror Dimming Connector End View (H7)
        • Emergency Tensioning Retractor (ETR [GUS]) With Airbag (AB) Control Unit Connector End View (N2/2)
        • Engine Separation Point Connector End View (X26/2)
        • Engine Systems Control Unit (ESCU [MAS]) Connector End View (N16)
        • ESP Yaw Rate Sensor Connector End View (N64)
        • ESP, SPS [PML] And BAS Control Unit Connector End View (N47-5)
        • ETC [EGS] Control Unit Connector End View (N15/3)
        • ETS/SPS [PML] Control Unit Connector End View (N47-2)
        • Fanfare Horn Relay Connector End View (K39)
        • Front ATA [EDW]/Rear ATA [EDW] Connector (4-Pin) Connector End View (X42)
        • Front Axle Level Sensor Connector End View (B22/2)
        • Fuel Pump Relay Connector End View (K27)
        • Gear Recognition Switch (Voltage Coded) Connector End View (S16/10)
        • Hands-Free System, Radio/Telephone Speaker Selection Relay Connector End View (A35/2)
        • Hazard Warning Flasher And CL [ZV] Switch Group Connector End View (S6)
        • HeadLamp Cleaning System (HCS [SRA]) Relay Connector End View (K2)
        • HeadLamp Harness Connector End View (X24)
        • Headlamp Range Adjustment Control Unit Connector End View (N71)
        • Heated Rear Window Switch Connector End View (S14)
        • Heating Systems, Automatic Heater, Tempmatic, Automatic Air Conditioning (HEAT [HAU], TAC [TAU], AAC [KLA])/Interior Connector (12-Pin) Connector End View (X85/2)
        • HFM-SFI [HFM] Control Unit Connector End View (N3/4)
        • Hot Film Mass Air Flow Sensor Connector End View (B2/5)
        • Hot Film Mass Air Flow Sensor Connector End View (M16/2)
        • Hot Wire Mass Air Flow Sensor Connector End View (B2/2)
        • Ignition/Starter Switch Connector End View (N16/1)
        • Ignition/Starter Switch Connector End View (S2/1)
        • Immobilizer Relay Connector End View (K38)
        • In-Car Temperature Sensor Connector End View (B10/4)
        • Infrared Remote Central Locking (IRCL [IFZ]) Control Unit Connector End View (N54)
        • Injection System Control Unit Connector End View (N3)
        • Instrument Cluster Connector End View (A1)
        • Interior And Taillamp Wiring Harness Connector (12-Pin) Connector End View (X18)
        • Interior/Engine Connector (12-Pin) Connector End View (X26)
        • Interior/Taillamp Harness Connector End View (X18/3)
        • Interior/Transmission Connector End View (X26/12)
        • Kickdown Switch (2nd Transmission Mode) Connector End View (S16/7)
        • Kickdown Switch Connector End View (S16/6)
        • Lamp Monitoring Unit Connector End View (N7)
        • Left DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/4)
        • Left EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Right Of Engine Connector End View (M16/4)
        • Left Electrically Adjustable And Heated Outside Mirror Connector End View (M21/1)
        • Left Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/7)
        • Left Front ESA Switch Group (With Memory) Connector End View (S91)
        • Left Front Lamp Unit Connector End View (E1)
        • Left Front Power Window Motor Connector End View (M10/3)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/1)
        • Left Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Left Front Seat Adjustment Control Unit With Memory Connector End View (N32/1)
        • Left Front Seat Contacting Strip Connector End View (X55/3)
        • Left Front Seat Heater Switch Connector End View (S51/1)
        • Left Headlamp Wiper Motor Connector End View (M6/2)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/6)
        • Left Hot Film MAF Sensor (Right Side Of Engine) Connector End View (B2/7)
        • Left Hot Wire MAF Sensor, Right Side Of Engine Connector End View (B2/3)
        • Left ME-SFI [ME] Control Unit Connector End View (N3/11)
        • Left O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/5)
        • Left O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/3)
        • Left Taillamp Connector End View (E3)
        • Left Turn Signal Lamp Connector End View (E6/1)
        • LH-SFI [LH] Control Unit Connector End View (N3/1)
        • Manual Transmission/Engine Connector (4-Pin) Connector End View (X22/4)
        • MB-Info And Breakdown Assistance Button Group Connector End View (S93/6)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 1)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. 2)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. A)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. B)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. C)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. D)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. E)
        • ME-SFI [ME] Control Unit Connector End View (N3/10, Conn. F)
        • Module Box Separation Point/Taillamp Wiring Harness Connector End View (X35/15)
        • Module Box/Engine Separation Point Connector End View (X35/26)
        • Module Box/Taillamp Wiring Harness Separation Point (13-Pin) Connector End View (X35/16)
        • MSC [ESL] Control Unit (With Memory) Connector End View (N32/9)
        • Multifunction Block Connector Connector End View (X30/1)
        • O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/1)
        • O2 Sensor Heater Downstream Of TWC [KAT] Relay Connector End View (K35)
        • O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/2)
        • Outside Mirror Switch With Mirror Fold-In/Fold-Out Facility Connector End View (S50/1)
        • Outside/Inside Rearview Mirror Switch Connector End View (S50)
        • Overvoltage Protection Relay, Circuit 87E/87L/30a (9-Pin) (Series K1/1) Connector End View (K1/2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 1)
        • Power Soft Top Control Unit Connector End View (N52, Conn. 2)
        • Power Soft Top Control Unit Connector End View (N52, Conn. X, Conn. Z)
        • Power Soft Top Control Unit Connector End View (N52, Conn. Y)
        • Radio Connector End View (A2, Conn. 1)
        • Radio Connector End View (A2, Conn. A, Conn. B)
        • Radio Control Panel Connector End View (A2/4)
        • Rear Axle Level Sensor Connector End View (B22/3)
        • Rear Axle Level Sensor Connector End View (X33/9)
        • Rear Axle Multiple Circuit Junction Connector End View (X62/8)
        • Receiver/Amplifier (In Trunk) Connector End View (A2/3)
        • Right DI/AKC [EZL/AKR] Switching Unit Connector End View (N1/5)
        • Right EA/CC/ISC [EFP/TPM/LLR] Actuator, Positioned on Left Of Engine Connector End View (M16/3)
        • Right Electrically Adjustable And Heated Outside Mirror Connector End View (M21/2)
        • Right Front Axle Multiple Circuit Junction Connector, Major Assembly Compartment Connector End View (X62/6)
        • Right Front ESA Switch Group (With Memory) Connector End View (S92)
        • Right Front Lamp Unit Connector End View (E2)
        • Right Front Power Window Motor Connector End View (M10/4)
        • Right Front Power Window Switch, Front Center Console Connector End View (S21/2)
        • Right Front Seat Adjustment Control Unit With Memory Connector End View (N32/2)
        • Right Front Seat Contacting Strip Connector End View (X55/4)
        • Right Front Seat Heater Switch Connector End View (S51/2)
        • Right Headlamp Wiper Motor Connector End View (M6/3)
        • Right Hot Wire MAF Sensor, Left Side Of Engine Connector End View (B2/4)
        • Right ME-SFI [ME] Control Unit Connector End View (N3/12)
        • Right O2 Sensor Downstream Of TWC [KAT] Connector End View (G3/6)
        • Right O2 Sensor Upstream Of TWC [KAT] Connector End View (G3/4)
        • Right Taillamp Connector End View (E4)
        • Right Turn Signal Lamp Connector End View (E6/2)
        • Roll Bar (RB [URB]) Control Unit - Crash Deployment Connector End View (N53)
        • Rotary Light Switch Connector End View (S1)
        • Seat Belt Warning Module Connector End View (N2/4)
        • SRS Test Connector (10-Pin) Connector End View (X11/13)
        • Starter Lock-Out And Back-Up Lamp Switch Connector End View (S16/1)
        • Starter Lock-Out And Back-Up Lamp Switch/Selector Lever Position Recognition Connector End View (S16/3)
        • Starter Lockout Relay Connector End View (K38/3)
        • Starter Wiring Harness Connector (5-Pin) Connector End View (X27)
        • Steering Angle Sensor Connector End View (N49)
        • Steering Column Adjustment Control Unit/Motor Connector (8-Pin) Connector End View (X54/7)
        • Telephone Control (Eyeglass Compartment) Connector End View (A35/3)
        • Telephone Handset Connector End View (A34/1)
        • Telephone Transmitter/Receiver Connector End View (A34)
        • Telephone Transmitter/Receiver Connector End View (A35)
        • Temperature Sensor Connector End View (B10/4)
        • Traction System Hydraulic Unit Connector End View (A7/3)
        • Transmission Control Unit (TCU) (5-Speed Automatic) Connector End View (N15/1)
        • Transmission Mode 'B' Engagement Switch Connector End View (S16/8)
        • Transmitter/Receiver Operating Unit/Plug Distributor Separation Point (12-Pin) Connector End View (X39/10)
        • Wiper Motor Connector End View (X88/2)
        • Wiper System Relay Connector End View (K26)
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Engine Mechanical
  • Accessory Drive Belts
    • Air Compressor, Belt Drives -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9104AB
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9113AB
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9119AB
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9120AB
        • Removing and installing poly V-belt - AR13.22-P-1202
          • Removing and installing poly V-belt - AR13.22-P-1202AO
          • Remove, install poly V-belt - AR13.22-P-1202B
        • Poly V-belt running diagram - AR13.22-P-3902
          • Poly V-belt running diagram - AR13.22-P-3902-02AO
          • Running diagram of poly V-belt - AR13.22-P-3902-02B
        • Remove/install poly-V belt tensioning device - AR13.25-P-3200B
      • Maintenance
        • Check condition of poly V-belt; to do so, gradually turn the engine. - AP13.22-P-1351-02C
      • Repair & Adjustments
        • Removing and installing poly V-belt - RA13001041200X(13-1200)
        • Checking poly V-belt, typical types of damage - RA13001041230X(13-1230)
        • Poly V-belt, running diagrams, dimensions - RA13001041240X(13-1240)
        • Removing and installing tensioning device - RA1300104320XX(13-3200)
        • Removing and installing belt pulley of tensioning device (2nd version) - RA13001043250X(13-3250)
        • Removing and installing guide pulley - RA13001043460X(13-3460)
          • Removing and installing guide pulley - RA13001043460X(13-3460)
          • Removing and installing guide pulley - RA13001203460X(13-3460)
        • Removing and installing shock absorber of tensioning device - RA13001044000X(13-4000)
        • Removing and installing carrier of air pump/generator, models 202, 210 - RA13001044200X(13-4200)
        • Removing and installing poly V-belt - RA13001193420X(13-3420)
        • Examining poly V-belt, damage patterns - RA13001193430X(13-3430)
          • Examining poly V-belt, damage patterns - RA13001193430X(13-3430)
          • Examining poly V-belt, typical damage - RA13001203430X(13-3430)
        • Poly V-belts, running diagrams, dimensions - RA13001193440X(13-3440)
        • Removing and installing tensioning device - RA13001193450X(13-3450)
          • Removing and installing tensioning device - RA13001193450X(13-3450)
          • Removing and installing tensioning device - RA13001203450X(13-3450)
        • Inspecting tensioning device (1st version) - RA13001193452X(13-3452)
        • Technical modifications Engine 120 Mechanical II - RA1300120TA00X
    • Drive Belt Routing
      • Drive Belt Routing
        • Belt Adjustment
  • Auxiliary Emission Control Systems
    • Emission Control System Visual Inspection Procedures - General Information
      • * Please Read This First *
      • Emission Control Labels
      • Emission Control Visual Inspection
        • Notes
        • Positive Crankcase Ventilation (PCV)
        • Thermostatic Air Cleaner (TAC)
        • Fuel Evaporative System (EVAP)
        • Catalytic Converters
          • Oxidation Catalyst (OC)
          • Three-Way Catalyst (TWC)
          • Three-Way Catalyst + Oxidation Catalyst (TWC + OC)
        • Fill Pipe RESTRICTOR (Fr)
        • Exhaust Gas RECIRCULATION (EGR) System
          • Single Diaphragm EGR Valve
          • Dual Diaphragm EGR Valve
          • Positive Backpressure EGR (BP/EGR) Valve
          • Negative Backpressure EGR (BP/EGR) Valve
          • Digital EGR Valve
          • Integrated Electronic EGR Valve
        • Spark Controls (SPK)
        • Air Injection System (AIS)
          • Air Pump Injection System (AP)
          • Pulsed Secondary Air Injection (PAIR) System
        • Oxygen Sensor (O2)
        • Computerized Engine Controls (CEC)
        • Early Fuel Evaporation (EFE)
        • Emission Maintenance Reminder Light (EMR) (If Equipped)
        • Malfunction Indicator Light (Mil)
    • Exhaust Manifolds, Emission Control -- 129 Chassis
      • Testing & Repair
        • Remove/install the oxygen sensor - AR14.00-P-5303
          • Remove/install an oxygen sensor - AR14.00-P-5303AB
          • Remove/install an oxygen sensor - AR14.00-P-5303D
          • Remove/install the oxygen sensor - AR14.00-P-5303E
          • Remove/install an oxygen sensor - AR14.00-P-5303EA
          • Remove/install the oxygen sensor - AR14.00-P-5303F
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9104AB
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9113AB
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9119AB
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9120AB
        • Remove/install exhaust manifold - AR14.10-P-3915
          • Remove/install exhaust manifold - AR14.10-P-3915AA
          • Remove/install exhaust manifold - AR14.10-P-3915GH
        • Remove/install left exhaust manifold - AR14.10-P-3930E
        • Removing and installing front left exhaust manifold - AR14.10-P-3960F
        • Removing and installing rear left exhaust manifold - AR14.10-P-3990F
        • Removing and installing right exhaust manifold - AR14.10-P-4005E
        • Removing and installing front right exhaust manifold - AR14.10-P-4035F
        • Removing and installing rear right exhaust manifold - AR14.10-P-4065F
        • Remove/install exhaust gas recirculation valve - AR14.20-P-7662
          • Remove/install exhaust gas recirculation valve - AR14.20-P-7662A
          • Removing and installing exhaust gas recirculation valve - AR14.20-P-7662E
          • Removing and installing exhaust gas recirculation valve - AR14.20-P-7662F
        • Removing and installing air pump - AR14.30-P-7251
          • Remove/install air pump - AR14.30-P-7251AA
          • Removing and installing air pump - AR14.30-P-7251D
          • Removing and installing air pump - AR14.30-P-7251E
          • Removing and installing secondary air pump - AR14.30-P-7251EA
          • Removing and installing air pump - AR14.30-P-7251F
        • Removing and installing air pump belt pulley - AR14.30-P-7252
          • Removing and installing air pump belt pulley - AR14.30-P-7252D
          • Removing and installing air pump belt pulley - AR14.30-P-7252F
        • Removing and installing electromagnetic coupling - AR14.30-P-7264D
      • Repair & Adjustments
        • Removing and installing intake manifold, replacing gasket - RA14001041310X(14-1310)
          • Removing and installing intake manifold, replacing gasket - RA14001041310X(14-1310)
          • Removing and Installing Intake Manifold; Replacing Gasket - RA14001191310X(14-1310)
        • Replacing intake manifold (intake manifold removed) - RA14001041346X(14-1346)
          • Replacing intake manifold (intake manifold removed) - RA14001041346X(14-1346)
          • Replacing Intake Manifold (Intake Manifold Removed) - RA14001191346X(14-1346)
        • Removing and installing exhaust manifold - RA14001043915X(14-3915)
          • Removing and installing exhaust manifold - RA14001043915X(14-3915)
          • Removing and Installing Exhaust Manifold - RA14001193915X(14-3915)
        • Removing and installing air pump - RA14001047251X(14-7251)
          • Removing and installing air pump - RA14001047251X(14-7251)
          • Removing and Installing Air Pump - RA14001197251X(14-7251)
        • Removing and installing electromagnetic clutch - RA14001047264X(14-7264)
          • Removing and installing electromagnetic clutch - RA14001047264X(14-7264)
          • Removing and Installing Electromagnetic Coupling - RA14001197264X(14-7264)
        • Removing and installing air pump switchover valve - RA14001047305X(14-7305)
          • Removing and installing air pump switchover valve - RA14001047305X(14-7305)
          • Removing and Installing Air Pump Switchover Valve - RA14001197305X(14-7305)
        • Removing and installing exhaust gas recirculation valve - RA14001047662X(14-7662)
          • Removing and installing exhaust gas recirculation valve - RA14001047662X(14-7662)
          • Removing and Installing Exhaust Gas Recirculation Switchover Valve (only , ) - RA14001197662X(14-7662)
        • Removing and installing exhaust gas recirculation switchover valve - RA14001047692X(14-7692)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA1400104TA00X
        • Technical Modifications Engine 119 Combustion KE Injection - RA1400119TA00X
        • Intake manifold - RA1400FLH0010X(14-0010)
          • Intake manifold - RA1400FLH0010X(14-0010)
          • Intake Manifold - RA1400HFM0010X(14-0010)
          • Intake manifold - RA1400KE20010X(14-0010)
        • Exhaust manifold - RA1400FLH0020X(14-0020)
          • Exhaust manifold - RA1400FLH0020X(14-0020)
          • Exhaust Manifold - RA1400HFM0020X(14-0020)
          • Exhaust manifold - RA1400KE20020X(14-0020)
        • Emissions control system - RA1400KE2A030X(14-0030)
          • Emissions control system - RA1400KE2A030X(14-0030)
          • Emissions control system - RA1400KE2B030X(14-0030)
          • Emissions control system - RA1400KE2C030X(14-0030)
          • Emissions control system - RA1400KE2D030X(14-0030)
          • Emissions control system - RA1400KE2G030X(14-0030)
      • Component Modifications
        • Exhaust manifold modified - BT14.10-P-0001-01A
        • Bolts of exhaust manifold modified - BT14.10-P-0002-01A
        • Material of exhaust manifold modified - BT14.10-P-0003-01A
        • Exhaust manifold in a double-wall design - BT14.10-P-9404-01G
        • Spacer ring of belt pulley - BT14.30-P-0001-01A
        • Material of air pump carrier modified - BT14.30-P-0002
          • Material of air pump carrier modified - BT14.30-P-0002-01A
          • Material of air pump carrier modified - BT14.30-P-0002-01B
        • Fit washer of air pump attachment modified - BT14.30-P-0003-01A
        • Diameter of air pump belt pulley modified - BT14.30-P-0004-01A
        • Air pump discontinued - BT14.30-P-9404-01D
  • Blowers, Superchargers & Turbochargers
    • Air Intake, Turbo Charging -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9104AB
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9113AB
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9119AB
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9120AB
        • Removing and installing air cleaner - AR09.10-P-1050
          • Removing and installing air cleaner - AR09.10-P-1050D
          • Removing/Installing Air Filter - AR09.10-P-1050E
          • Removing and installing air cleaner - AR09.10-P-1050F
        • Removing and installing air cleaner cross pipe - AR09.10-P-8031G
        • Removing and installing intake scoop - AR09.10-P-8221
          • Removing and installing intake air scoop - AR09.10-P-8221D
          • Removing and installing intake scoop - AR09.10-P-8221EB
          • Removing and installing intake scoop - AR09.10-P-8221FA
        • Removing and installing intake manifold - AR09.20-P-1310
          • Remove/install intake manifold - AR09.20-P-1310A
            • Notes
            • Intake manifold connection diagram - AR09.20-P-1310-01AC
            • Intake manifold connection diagram - AR09.20-P-1310-01AU
          • Removing and installing intake manifold - AR09.20-P-1310D
            • Notes
            • Connecting diagram of intake manifold - AR09.20-P-1310-01DA
            • Removing and installing ram manifold - AR09.20-P-1310-02DA
          • Removing and installing intake manifold - AR09.20-P-1310E
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01E
            • Tightening diagram for attaching intake manifold - AR09.20-P-1310-03E
            • Replacing intake manifold - AR09.20-P-1310-04E
          • Removing and installing intake manifold - AR09.20-P-1310EA
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01EA
            • Replacing intake manifold - AR09.20-P-1310-04EA
          • Removing and installing intake manifold - AR09.20-P-1310F
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01F
          • Removing and installing intake manifold - AR09.20-P-1310FA
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01FA
        • Removing and installing resonance flap - AR09.20-P-1791D
      • Repair & Adjustments
        • Removing and installing air cleaner - RA09001040015X(09-0015)
          • Removing and installing air cleaner - RA09001040015X(09-0015)
          • Removing and Installing Air Cleaner - RA09001190015X(09-0015)
          • Cyclonic separator - RA0900KE20015X(09-0015)
        • Removing and installing intake air scoop - RA09001040060X(09-0060)
          • Removing and installing intake air scoop - RA09001040060X(09-0060)
          • Removing and Installing Intake Air Scoop - RA09001190060X(09-0060)
        • Technical Modifications Engine 119 Combustion KE Injection - RA0900119TA00X
        • Air cleaner - RA0900KE20010X(09-0010)
      • Component Modifications
        • Metal intermediate flange replaces rubber intermediate flange - BT09.20-P-0001-01A
        • Intake manifold with mount for intake noise muffler - BT09.20-P-0003-01A
  • Cooling Fan
    • Electric Cooling Fans
      • Identification
      • Testing
      • Removal & Installation
        • * Please Read This First*
        • Cooling Fan
          • Engine 112.947 In Chassis 170.465 & Engine 112.960 In Chassis 170.466
          • Engine 113.981 In Chassis 163.174
          • Engine 611.960 In Chassis 202.133/134/193/194; Engine 611.961 In Chassis 210.006/007/206/606 & Engine 612.961 In Chassis 210.016/216/616
        • Viscous Fan Clutch
          • Engine 111 In Model 124, 170, 202, 210, 208 & 163
          • Engine 112 In Models 129, 163.154, 202, 210 & 463; Engine 113 In Models 129, 163.172, 202, 208 & 210
          • Engine 120 In Models 129 & 140
        • Viscous Fan Coupling
          • Engine 601, 604 In Model 202 & Engine 604 In Model 210
          • Engine 602.982, 605, 606.912/962 In Model 210; Engine 605 & 606 In Model 124; Engine 605 In Model 202 & Engine 606.961 In Model 140
        • Fan Shroud Assembly
          • Engine 111 In Models 124, 170, 202, 208, 210 & 163; Engines 602.982, 604, 605 & 606 In Model 210; Engine 111, 604, & 605 In Model 202; Engine 111, 605, & 606 In Model 124 & Engine 606 In Model 140
          • Engine 111.958 In Chassis 170.444 & Engine 111.983 In Chassis 170.449
          • Engine 112 In Models 215 & 220; Engine 112 In Model 220
          • Engine 120 In Models 129 & 140
      • Fluid Capacities
      • Torque Specifications
      • Wiring Diagrams
    • Electric Cooling Fans - 129, 208 & 210 Chassis
      • Model Identification
      • Description & Operation
      • Drain, Fill & Bleeding Cooling System
        • Notes
        • Draining & Filling Cooling System
        • Bleeding Coolant System
      • Testing
      • Trouble Shooting
        • Auxiliary Fans
        • Auxiliary Fan Does Not Run
        • Viscous Fan Clutch
      • Removal & Installation
        • Auxiliary Fans Assembly
          • Notes
          • Removal & Installation (129.068 Chassis)
          • Removal & Installation (208 Chassis)
          • Removal & Installation (210 Chassis)
        • Cooling Fan & Viscous Fan Clutch
          • Notes
          • Removal
          • Installation
        • Radiator
          • Notes
          • Removal (Chassis 129)
          • Installation
      • Torque Specifications
      • Special Tools
      • Wiring Diagrams
    • Electric Cooling Fans - Wiring Diagrams
      • Wiring Diagrams
  • Cooling System (Mechanical)
    • Cooling Specifications
      • Identification
      • Specifications
        • Engine Series 104
          • Models 124 & 202
          • Models 129 & 140
          • Models 210 & 463
        • Engine Series 111
          • Models 202, 124, 210, 208, & 170
          • Models 203 & 163
        • Engine Series 112 & 113
          • Models 170, 202, 208, & 210
          • Models 203, 220, 129, & 463
          • Models 163, 210, 208, 202, 215, 220, &163
          • Models 129 & 463
        • Engine Series 119
          • Models 129 & 140
          • Models 124 & 210
        • Engine Series 120
          • Models 129 & 140
        • Engine Series 601, 602, & 603
          • Engines 601.911/921 & 601.912
          • Engines 601.913 & 602.911/961
          • Engines 602.912, 603.913/960/962/963 & 602.930
          • Engines 602.931 & 602.938/939/942/946/947
          • Engines 602.962 & 602.982
          • Engines 602.983 & 603.931/972
          • Engines 603.961/970/971 & 603.996
        • Engine Series 604, 605 & 606
          • Modification Notes
          • Engines 604.910/915 & 604.912/917
          • Engines 605.910/960/962, 605.911 & 605.912
          • Engines 606.910, 606.912, 606.962, 606.964 & 606.961
        • Engine Series 611
          • Engines 611.960, 611.961 & 611.962
        • Engine Series 612
          • Engines 612.961, 612.962 & 612.963
        • Engine Series 613
          • Engines 613.960 & 613.961
        • Engine Series 628
          • Engines 628.960, 628.962 In 463
    • Drive Belt Routing
      • Drive Belt Routing
        • Belt Adjustment
    • Engine Cooling System -- 129 Chassis
      • General Information
        • Notes on coolant - AH20.00-N-2080-01A
        • Notes on coolant level - AH20.00-P-1142-01V
        • Notes on viscous fan clutch - AH20.40-P-0001-01AO
      • Basic Knowledge
        • Reservoir cap, location/design/function - GF20.30-P-1000A
          • Notes
          • Reservoir cap, function - GF20.30-P-1000-01A
      • Safety Precautions
        • Risk of injury - AS20.00-Z-0001-01A
      • Testing & Repair
        • Inspect cooling system for leaks - AR20.00-P-1010HA
        • Checking the shift point of the cooling system - AR20.00-P-1020AO
        • Drain/fill in coolant - AR20.00-P-1142HA
          • Notes
          • Bleed cooling system - AR20.00-P-1142-06GA
        • Testing and repair work: Passenger cars: Engine cooling system - AR20.00-Z-9113AB
        • Testing and repair work: Passenger cars: Engine cooling system - AR20.00-Z-9120AB
        • Remove/install coolant pump - AR20.10-P-1271B
        • Testing coolant thermostat - AR20.10-P-2455AV
        • Remove/install coolant thermostat - AR20.10-P-2460B
        • Remove/install radiator - AR20.20-P-3865AV
        • Test cooling system cap - AR20.30-P-4300
          • Test cooling system cap - AR20.30-P-4300FV
          • Test cooling system cap - AR20.30-P-4300HA
        • Test coolant gage - AR20.30-P-4460A
        • Removing and installing overflow tank - AR20.30-P-4540AO
        • Removing and installing viscous fan clutch - AR20.40-P-5660
          • Removing and installing viscous fan clutch - AR20.40-P-5660AO
          • Remove/install viscous fan clutch - AR20.40-P-5660C
        • Removing and installing fan shroud - AR20.40-P-6800AO
      • Maintenance
        • Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration - AP20.00-P-2010Z
        • Replace coolant - AP20.00-P-2080A
      • Repair & Adjustments
        • Switching points in cooling system - RA20001040020X(20-0020)
          • Switching points in cooling system - RA20001040020X(20-0020)
          • Switching points in cooling system - RA20001190020X(20-0020)
        • Coolant circuit - RA20001040050X(20-0050)
          • Coolant circuit - RA20001040050X(20-0050)
          • Coolant circuit and engine cooling - RA20001200050X(20-0050)
        • Operation of engine off cooling - RA20001040060X(20-0060)
        • Draining, pouring in coolant - anti-freeze protection table - RA20001040100X(20-0100)
          • Draining, pouring in coolant - anti-freeze protection table - RA20001040100X(20-0100)
          • Draining, pouring in coolant - Anti-freeze protection table - RA20001190100X(20-0100)
          • Draining coolant, filling in - Anti-freeze table - RA20001200100X(20-0100)
        • Flushing cooling and heating system - RA20001040150X(20-0150)
          • Flushing cooling and heating system - RA20001040150X(20-0150)
          • Notes on coolant hoses - RA20001190150X(20-0150)
        • Removing oil in cooling and heating system - RA20001040160X(20-0160)
          • Removing oil in cooling and heating system - RA20001040160X(20-0160)
          • Removing oil in cooling and heating system - RA20001190160X(20-0160)
        • Testing cooling system for leaks - RA20001040170X(20-0170)
          • Testing cooling system for leaks - RA20001040170X(20-0170)
          • Testing cooling system for leaks - RA20001190170X(20-0170)
        • Removing and installing coolant thermostat - RA20001041100X(20-1100)
          • Removing and installing coolant thermostat - RA20001041100X(20-1100)
          • Removing and installing coolant thermostat - RA20001191100X(20-1100)
          • Removing and installing coolant thermostat - RA20001201100X(20-1100)
        • Replacing connection pipe from cylinder head coolant pump - RA20001042110X(20-2110)
        • Sealing coolant pump - RA20001042250X(20-2250)
        • Retrofitting coolant pump drain pipe - RA20001042255X(20-2255)
        • Removing and installing coolant pipe from heat exchanger to coolant pump - RA20001042300X(20-2300)
        • Temperature-controlled viscous fan clutch - RA20001043120X(20-3100)
        • Removing and installing viscous fan clutch - RA20001043120X(20-3120)
          • Removing and installing viscous fan clutch - RA20001043120X(20-3120)
          • Removing and installing viscous fan clutch - RA20001193120X(20-3120)
        • Removing and installing, adjusting fan shroud - RA20001043400X(20-3400)
          • Removing and installing, adjusting fan shroud - RA20001043400X(20-3400)
          • Removing, installing and adjusting fan cowl - RA20001203400X(20-3400)
        • Testing cooling system pressure cap - RA2000104430X(20-4300)
          • Testing cooling system pressure cap - RA2000104430X(20-4300)
          • Testing cooling system cap - RA20001194300X(20-4300)
        • Function of electrical coolant level indicator - RA20001044450X(20-4450)
        • Removing and installing coolant pump - RA20001192100X(20-2100)
          • Removing and installing coolant pump - RA20001192100X(20-2100)
          • Removing and installing coolant pump - RA20001202100X(20-2100)
          • Removing and installing coolant pump - RA200A1042100X(20-2100)
        • Removing and installing bearing bracket of viscous fan clutch - RA20001193140X(20-3140)
          • Removing and installing bearing bracket of viscous fan clutch - RA20001193140X(20-3140)
          • Removing and installing bearing bracket of viscous fan clutch - RA200A1043140X(20-3140)
        • A20-4200 Removing and installing radiator - RA20001194200X
        • Electrical function of coolant level indicator - RA2000119440X(20-4400)
        • Removing and installing expansion reservoir - RA20001194500X(20-4500)
          • Removing and installing expansion reservoir - RA20001194500X(20-4500)
          • Removing and installing expansion tank - RA20001204500X(20-4500)
          • Removing and installing expansion reservoir - RA200B1044500X(20-4500)
        • Removing and installing overflow reservoir - RA20001194540X(20-4540)
          • Removing and installing overflow reservoir - RA20001194540X(20-4540)
          • Removing and installing overflow reservoir - RA200B1044540X(20-4540)
        • Technical modifications Engine 119 Mechanical III - RA2000119TA00X
        • Removing and installing coolant thermostat housing - RA20001201120X(20-1120)
        • Removing and installing radiator - RA20001204200X(20-4200)
          • Removing and installing radiator - RA20001204200X(20-4200)
          • Removing and installing radiator - RA200B1044200X(20-4200)
        • Technical modifications Engine 120 Mechanical II - RA2000120TA00X
  • Exhaust
    • Exhaust Manifolds, Emission Control -- 129 Chassis
      • Testing & Repair
        • Remove/install the oxygen sensor - AR14.00-P-5303
          • Remove/install an oxygen sensor - AR14.00-P-5303AB
          • Remove/install an oxygen sensor - AR14.00-P-5303D
          • Remove/install the oxygen sensor - AR14.00-P-5303E
          • Remove/install an oxygen sensor - AR14.00-P-5303EA
          • Remove/install the oxygen sensor - AR14.00-P-5303F
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9104AB
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9113AB
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9119AB
        • Testing and repair work: Passenger cars: Exhaust manifold, engine brake, emission control system - AR14.00-Z-9120AB
        • Remove/install exhaust manifold - AR14.10-P-3915
          • Remove/install exhaust manifold - AR14.10-P-3915AA
          • Remove/install exhaust manifold - AR14.10-P-3915GH
        • Remove/install left exhaust manifold - AR14.10-P-3930E
        • Removing and installing front left exhaust manifold - AR14.10-P-3960F
        • Removing and installing rear left exhaust manifold - AR14.10-P-3990F
        • Removing and installing right exhaust manifold - AR14.10-P-4005E
        • Removing and installing front right exhaust manifold - AR14.10-P-4035F
        • Removing and installing rear right exhaust manifold - AR14.10-P-4065F
        • Remove/install exhaust gas recirculation valve - AR14.20-P-7662
          • Remove/install exhaust gas recirculation valve - AR14.20-P-7662A
          • Removing and installing exhaust gas recirculation valve - AR14.20-P-7662E
          • Removing and installing exhaust gas recirculation valve - AR14.20-P-7662F
        • Removing and installing air pump - AR14.30-P-7251
          • Remove/install air pump - AR14.30-P-7251AA
          • Removing and installing air pump - AR14.30-P-7251D
          • Removing and installing air pump - AR14.30-P-7251E
          • Removing and installing secondary air pump - AR14.30-P-7251EA
          • Removing and installing air pump - AR14.30-P-7251F
        • Removing and installing air pump belt pulley - AR14.30-P-7252
          • Removing and installing air pump belt pulley - AR14.30-P-7252D
          • Removing and installing air pump belt pulley - AR14.30-P-7252F
        • Removing and installing electromagnetic coupling - AR14.30-P-7264D
      • Repair & Adjustments
        • Removing and installing intake manifold, replacing gasket - RA14001041310X(14-1310)
          • Removing and installing intake manifold, replacing gasket - RA14001041310X(14-1310)
          • Removing and Installing Intake Manifold; Replacing Gasket - RA14001191310X(14-1310)
        • Replacing intake manifold (intake manifold removed) - RA14001041346X(14-1346)
          • Replacing intake manifold (intake manifold removed) - RA14001041346X(14-1346)
          • Replacing Intake Manifold (Intake Manifold Removed) - RA14001191346X(14-1346)
        • Removing and installing exhaust manifold - RA14001043915X(14-3915)
          • Removing and installing exhaust manifold - RA14001043915X(14-3915)
          • Removing and Installing Exhaust Manifold - RA14001193915X(14-3915)
        • Removing and installing air pump - RA14001047251X(14-7251)
          • Removing and installing air pump - RA14001047251X(14-7251)
          • Removing and Installing Air Pump - RA14001197251X(14-7251)
        • Removing and installing electromagnetic clutch - RA14001047264X(14-7264)
          • Removing and installing electromagnetic clutch - RA14001047264X(14-7264)
          • Removing and Installing Electromagnetic Coupling - RA14001197264X(14-7264)
        • Removing and installing air pump switchover valve - RA14001047305X(14-7305)
          • Removing and installing air pump switchover valve - RA14001047305X(14-7305)
          • Removing and Installing Air Pump Switchover Valve - RA14001197305X(14-7305)
        • Removing and installing exhaust gas recirculation valve - RA14001047662X(14-7662)
          • Removing and installing exhaust gas recirculation valve - RA14001047662X(14-7662)
          • Removing and Installing Exhaust Gas Recirculation Switchover Valve (only , ) - RA14001197662X(14-7662)
        • Removing and installing exhaust gas recirculation switchover valve - RA14001047692X(14-7692)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA1400104TA00X
        • Technical Modifications Engine 119 Combustion KE Injection - RA1400119TA00X
        • Intake manifold - RA1400FLH0010X(14-0010)
          • Intake manifold - RA1400FLH0010X(14-0010)
          • Intake Manifold - RA1400HFM0010X(14-0010)
          • Intake manifold - RA1400KE20010X(14-0010)
        • Exhaust manifold - RA1400FLH0020X(14-0020)
          • Exhaust manifold - RA1400FLH0020X(14-0020)
          • Exhaust Manifold - RA1400HFM0020X(14-0020)
          • Exhaust manifold - RA1400KE20020X(14-0020)
        • Emissions control system - RA1400KE2A030X(14-0030)
          • Emissions control system - RA1400KE2A030X(14-0030)
          • Emissions control system - RA1400KE2B030X(14-0030)
          • Emissions control system - RA1400KE2C030X(14-0030)
          • Emissions control system - RA1400KE2D030X(14-0030)
          • Emissions control system - RA1400KE2G030X(14-0030)
      • Component Modifications
        • Exhaust manifold modified - BT14.10-P-0001-01A
        • Bolts of exhaust manifold modified - BT14.10-P-0002-01A
        • Material of exhaust manifold modified - BT14.10-P-0003-01A
        • Exhaust manifold in a double-wall design - BT14.10-P-9404-01G
        • Spacer ring of belt pulley - BT14.30-P-0001-01A
        • Material of air pump carrier modified - BT14.30-P-0002
          • Material of air pump carrier modified - BT14.30-P-0002-01A
          • Material of air pump carrier modified - BT14.30-P-0002-01B
        • Fit washer of air pump attachment modified - BT14.30-P-0003-01A
        • Diameter of air pump belt pulley modified - BT14.30-P-0004-01A
        • Air pump discontinued - BT14.30-P-9404-01D
    • Exhaust System -- 129 Chassis
      • General Information
        • Notes on installation position and suspension of rear muffler - AH49.10-P-1000
          • Notes on installation position and suspension of rear muffler - AH49.10-P-1000-02A
          • Notes on installation position and suspension of rear muffler - AH49.10-P-1000-02B
        • Paying attention to installation of threaded plate - AH49.10-P-9409-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Exhaust system - AR49.00-Z-9104AB
        • Testing and repair work: Passenger cars: Exhaust system - AR49.00-Z-9113AB
        • Testing and repair work: Passenger cars: Exhaust system - AR49.00-Z-9119AB
        • Testing and repair work: Passenger cars: Exhaust system - AR49.00-Z-9120AB
        • Replacing center and rear muffler - AR49.10-P-4940F
        • Removing and installing catalytic converter or front exhaust system - AR49.10-P-5531
          • Removing and installing catalytic converter or front exhaust system - AR49.10-P-5531AB
            • Notes
            • Replace the rivet nuts in the exhaust manifold. - AR49.10-P-5531-01DA
          • Removing and installing three way catalytic converter or front exhaust system - AR49.10-P-5531D
          • Remove / install catalytic converter and front exhaust system - AR49.10-P-5531E
          • Remove and installing catalytic converter or front exhaust system - AR49.10-P-5531EA
          • Remove and installing catalytic converter or front exhaust system - AR49.10-P-5531F
        • Removing and installing exhaust system complete - AR49.10-P-7000
          • Removing and installing exhaust system complete - AR49.10-P-7000AB
          • Removing and installing exhaust system complete - AR49.10-P-7000D
          • Removing and installing exhaust system complete - AR49.10-P-7000E
          • Removing and installing exhaust system complete - AR49.10-P-7000F
        • Remove / install exhaust system from flange connection - AR49.10-P-7280FA
      • Repair & Adjustments
        • Removing and installing exhaust system as from flanged connection - RA49001040045X(49-0045)
          • Removing and installing exhaust system as from flanged connection - engine 104
          • Removing and Installing Exhaust System Downstream of Flanged Joint - engine 119
        • Removing and installing catalytic converter/front exhaust system - RA49001040170X(49-0170)
          • Removing and installing catalytic converter/front exhaust system - engine 104
          • Removing and Installing Catalytic Converter or Front Exhaust System - engine 119
        • Removing and installing exhaust system completely - RA49001047000X(49-7000)
          • Removing and installing exhaust system completely - engine 104
          • Removing and Installing Exhaust System Complete - engine 119
        • Catalytic converter - RA4900FLH0005X(49-0005)
          • Catalytic converter - LH-SFI
          • Catalytic Converter - HFM-SFI
        • Exhaust system - RA4900FKG0010X(49-0010)
          • Exhaust system
            • A. Engine 104
            • B. Engine 119
            • C. Engine 120
          • Exhaust system -
            • Overview
          • Exhaust System -
            • A: Model 124
            • B: Model 129
            • C: Model 140
            • D: Model 202
        • General notes regarding vehicles with catalytic converter - RA4900FLH0025X(49-0025)
        • Catalytic converter - RA4900KE30015X(49-0015)
        • Testing catalytic converter temperature warning system - RA4900KE30020X(49-0020)
      • Component Modifications
        • Catalytic converter coating modified - BT49.10-P-0001-01A
        • Front exhaust pipes and catalytic converter - BT49.10-P-9404
          • Modified front exhaust pipes - BT49.10-P-9404-01D
          • Shape and cross section of catalytic converter modified - BT49.10-P-9404-02D
      • Miscellaneous Notes
        • Notes on disposing of catalytic converters - OS49.10-P-1000-01A
  • Fuel System
    • Fuel System -- 129 Chassis
      • Basic Knowledge
        • Fuel pump assembly overview - GF47.20-P-0025-02A
        • Purge control valve, location/task/design/function - GF47.30-P-4030L
      • Safety Precautions
        • Risk of explosion caused by fuel Igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel. - AS47.00-Z-0001-01A
      • Testing & Repair
        • Removing and installing fuel cooler - AR47.00-P-3061F
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9104AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9113AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9119AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9120AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9129AA
        • Draining and filling fuel tank - AR47.10-P-4001F
        • Remove/install fuel tank - AR47.10-P-4100
          • Remove/install fuel tank - AR47.10-P-4100D
            • Notes
            • Removing fuel tank - AR47.10-P-4100-01DD
          • Removing and installing fuel tank - AR47.10-P-4100FA
        • Removing and installing fuel gauge sensor - AR47.10-P-7000FA
        • Removing and installing guide funnel - AR47.10-P-7571D
        • Remove/install fuel pump - AR47.20-P-5710MA
        • Removing and installing fuel pumps - AR47.20-P-5713
          • Removing and installing fuel pumps - AR47.20-P-5713B
          • Removing and installing fuel pumps - AR47.20-P-5713D
          • Removing and installing fuel pumps - AR47.20-P-5713F
        • Removing and installing check valve for fuel pump - AR47.20-P-5820
          • Removing and installing check valve for fuel pump - AR47.20-P-5820D
          • Removing and installing check valve for fuel pump - AR47.20-P-5820F
        • Removing and installing activated charcoal filter - AR47.30-P-8212
          • Removing and installing activated charcoal filter - AR47.30-P-8212B
            • Notes
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01DH
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01DJ
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01EC
          • Removing and installing activated charcoal canister - AR47.30-P-8212D
            • Notes
            • Connecting diagram of evaporation emission control system - AR47.30-P-8212-01DA
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01EA
            • Function diagram of evaporative emission control system - AR47.30-P-8212-01EB
          • Removing and installing activated charcoal canister - AR47.30-P-8212FA
            • Notes
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01FA
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01FB
        • Removing and installing safety valve - AR47.31-P-8022B
        • Remove shutoff valve, install - AR47.31-P-8023B
      • Repair & Adjustments
        • Removing and installing fuel tank - RA47001044100X(47-4100)
          • Removing and installing fuel tank - RA47001044100X(47-4100)
          • Removing and Installing Fuel Tank - RA47001194100X(47-4100)
          • Removing and installing fuel tank - RA47LH1044100X(47-4100)
        • Removing and installing fuel gauge sending unit - RA47001047000X(47-7000)
          • Removing and installing fuel gauge sending unit - RA47001047000X(47-7000)
          • Removing and Installing Fuel Gauge Sending Unit - RA7001197000X(47-7000)
          • Removing and installing fuel gauge sending unit - RA47LH1047000X(47-7000)
        • Removing and installing guide funnel - RA47001047571X(47-7571)
          • Removing and installing guide funnel - RA47001047571X(47-7571)
          • Removing and Installing Guide Funnel - RA47001197571X(47-7571)
          • Removing and installing guide funnel - RA47LH1047571X(47-7571)
        • Removing and installing charcoal canister - RA47001048212X(47-8212)
          • Removing and installing charcoal canister - RA47001048212X(47-8212)
          • Removing and Installing Activated Charcoal Canister - RA47001198212X(47-8212)
          • Removing and installing activated charcoal filter - RA47LH1048212X(47-8212)
        • Removing and installing regeneration switchover valve (fuel evaporation) - RA47001048252X(47-8252)
          • Removing and installing regeneration switchover valve (fuel evaporation) - RA47001048252X(47-8252)
          • Removing and Installing Regeneration Switchover Valve (Fuel Evaporation Control System) - RA47001198252X(47-8252)
          • Removing and installing regeneration switchover valve (fuel evaporation) - RA47LH1048252X(47-8252)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA4700104TA00X
        • Fuel cooler - RA4700FLH0005X(47-0005)
          • Fuel cooler - RA4700FLH0005X(47-0005)
          • Fuel cooler - RA4700KE30005X(47-0005)
        • Fuel tank with splash bowl - RA4700FLH0010X(47-0010)
          • Fuel tank with splash bowl - RA4700FLH0010X(47-0010)
          • Fuel Gauge Sender - RA4700HFM0010X(47-0010)
          • Fuel tank with splash bowl - RA4700KE30010X(47-0010)
        • Fuel gauge sensor - RA4700FLH0020X(47-0020)
          • Fuel gauge sensor - RA4700FLH0020X(47-0020)
          • Fuel Tank - RA4700HFM0020X(47-0020)
          • Fuel gauge sensor - RA4700KE30020X(47-0020)
        • Fuel tank positive and negative ventilation system - RA4700FLH0030X(47-0030)
          • Fuel tank positive and negative ventilation system - RA4700FLH0030X(47-0030)
          • Function Diagram of Fuel Evaporation Control System - RA4700HFM0030X(47-0030)
          • Fuel tank air admission and ventilation - RA4700KE30030K(47-0030)
        • Fuel evaporation control system - RA4700FLH0200X(47-0200)
          • Fuel evaporation control system - RA4700FLH0200X(47-0200)
          • Fuel evaporation system - RA4700KE30200X(47-0200)
        • Function of Fuel Evaporation Control System - RA4700HFM0040X(47-0040)
        • Removing and installing, replacing fuel cooler - RA47LH1043061X(47-3061)
        • Removing and installing fuel expansion tank (models with skibag) - RA47LH1048021X(47-8021)
      • Component Modifications
        • Lever sender replaces immersed pipe sender - BT47.10-P-0001-01A
        • Screw spindle pump replaces double fuel pump unit - BT47.20-P-0001-01A
      • Miscellaneous Notes
        • Disposing of fuel tanks - OS47.10-P-0001-01A
    • Mixture Formation -- Component Modifications -- 129 Chassis
      • Component Modifications
        • LH-SFI fuel injection valves modified - BT07.03-P-0001-01A
        • O-ring at fuel injection valve modified - BT07.03-P-0002-02A
        • LH-SFI variable reference resistor modified - BT07.41-P-0001-01A
    • Mixture Formation -- General Information -- 129 Chassis
      • General Information
        • Notes on actuations - AH07.00-P-3000
          • References to test conditions for engine testing and adjusting work - AH07.00-P-3000-01A
          • Notes on actual value screens - AH07.00-P-3000-02WA
          • Notes on actuations - AH07.00-P-3000-03WA
        • Notes regarding test conditions when testing engine output and exhaust gas - AH07.00-P-3003-01A
        • Notes on engine tests - AH07.00-P-3004
          • Notes on compression test - AH07.00-P-3004-01WA
          • Notes on smooth engine running test - AH07.00-P-3004-02WA
          • Notes on ignition circuit shutoff test - AH07.00-P-3004-03WA
    • Mixture Formation -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model Designation, Installation Survey - RA07031190001X(07.3-0001)
          • Model and components survey - RA0703KE10001X(07.3-0001)
        • Location of components - RA07031040005X(07.3-0005)
          • Location of components - RA07031040005X(07.3-0005)
          • Location of Components - RA07031190005X(07.3-0005)
        • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and Installing Starting Valve - RA07031191606X(07.3-1606)
        • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Conducting Fuel Quantity Comparison Measurement - RA07031191609X(07.3-1609)
        • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Testing, Adjusting Zero Position of Air Flow Sensor Plate - RA07031191612X(07.3-1612)
        • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and Installing KE Resistance Trimming Plug - RA07031191652X(07.3-1652)
        • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing Seal for Control Plunger - RA07031191660X(07.3-1660)
        • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and Installing Air Flow Sensor Plate - RA07031191665X(07.3-1665)
        • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and Installing Mixture Control Unit - RA07031191668X(07.3-1668)
        • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and Installing Diaphragm Pressure Regulator - RA07031191669X(07.3-1669)
        • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and Installing Fuel Distributor - RA07031191674X(07.3-1674)
        • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and Installing Fuel Accumulator - RA07031191683X(07.3-1683)
        • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and Installing Air Flow Sensor - RA07031191686X(07.3-1686)
        • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and Installing Coolant Temperature Sensor - RA07031191687X(07.3-1687)
        • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and Installing Overvoltage Protection - RA07031191688X(07.3-1688)
        • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and Installing Throttle Valve Switch - RA07031191689X(07.3-1689)
        • Removing and installing microswitch - RA07031041690X(07.3-1690)
        • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and Installing Intake Air Temperature Sensor - RA07031191691X(07.3-1691)
        • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191698X(07.3-1692)
        • Replacing vehicle speed Hall-effect sensor - RA07031041693X(07.3-1693)
        • Removing and installing CIS-E control unit - RA07031041698X(07.3-1698)
        • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and Installing Idle Speed Adjuster - RA07031192118X(07.3-2118)
        • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing Oxygen Sensor - RA07031195303X(07.3-5303)
        • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and Installing Fuel Filter - RA07031195563X(07.3-5563)
        • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and Installing Fuel Pumps - RA07031195713X(07.3-5713)
        • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and Installing Fuel Pump Set - RA07031195770X(07.3-5770)
        • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing Check Valve for Fuel Pump - RA07031195820X(07.3-5820)
        • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and Installing Rubber Pads for Fuel Pump Set - RA07031195860X(07.3-5860)
        • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and Installing Throttle Valve Assembly - RA07031196210X(07.3-6210)
        • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing Injection Valves - RA07031196500X(07.3-6500)
        • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and Installing Injection Valves - RA07031196520X(07.3-6520)
        • Programmed Repairs Engine 104 Combustion CIS-E Injection - RA0703104PR00X
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA0703104TA00X
        • KE Function Diagram - RA07031190003X(07.3-0003)
        • Technical Modifications Engine 119 Injection Combustion KE - RA0703119TA00X
        • Vehicle features - RA0703KE10004X(07.3-0004)
        • Function diagram KE injection system - RA0703KE10010X(07.3-0010)
        • Location of components - RA0703KE10015X(07.3-0015)
        • Influencing parameters at KE control unit - RA0703KE10020X(07.3-0020)
        • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation (continuation) - RA0703KE2E030X(07.3-0030)
        • Fuel supply - RA0703KE1B030X(B.)
        • Mixture formation - RA0703KE1C030X(C.)
        • Functions in the KE control unit - RA0703KE1D030X(D.)
        • Start devices - RA0703KE2F030X(F.)
        • Idle speed devices - RA0703KE2G030X(G.)
        • Installation survey - RA07041040001X(07.4-0001)
        • Removing and installing diaphragm pressure regulator - RA07041041450X(07.4-1450)
        • Removing and installing fuel distributor with injection valves - RA07041041451X(07.4-1451)
        • Removing and installing protective grille at air mass sensor - RA07041041452X(07.4-1452)
        • Removing and installing hot wire air mass sensor - RA07041041453X(07.4-1453)
        • Removing and installing LH resistance trimming plug - RA07041041459X(07.4-1459)
        • Removing and installing coolant temperature sensor - RA07041041462X(07.4-1462)
        • Removing and installing intake air temperature sensor - RA07041041465X(07.4-1465)
        • Removing and installing LH control unit - RA07041041470X(07.4-1470)
        • Replacing oxygen sensor - RA07041045303X(07.4-5303)
        • Removing and installing fuel filter - RA07041045563X(07.4-5563)
        • Removing and installing fuel pumps - RA07041045750X(07.4-5750)
        • Removing and installing fuel pump pack - RA07041045770X(07.4-5770)
        • Replacing check valve for fuel pumps - RA07041045820X(07.4-5820)
        • Removing and installing rubber blocks for fuel pump pack - RA07041045860X(07.4-5860)
        • Removing and installing injection valves - RA07041046520X(07.4-6520)
        • Renewing isolating sleeves and rubber rings (for injection valves) - RA07041046572X(07.4-6572)
        • Programmed repairs - RA0704104PR00X
        • Technical modifications - RA0704104TA00X
        • Vehicle features - RA0704FLH0004X(07.4-0004)
        • Function diagram - RA0704FLH0010X(07.4-0010)
        • Location of components - RA0704FLH0015X(07.4-0015)
        • Influencing parameters at control unit - RA0704FLH0020X(07.4-0020)
        • Design and function - RA0704FLH0030X(07.4-0030)
        • Vehicle Features - RA0705HFM004X(07.5-0004)
        • Function Diagram - RA0705HFM0010X(07.5-0010)
        • Location of Components - RA0705HFM0015X(07.5-0015)
        • Influencing Parameters at the Control Unit - RA0705HFM0020X(07.5-0020)
        • HFM Design and Function - RA0705HFM0030X(07.5-0030)
        • HFM Ignition System Design and Function - RA0705HFM0035X(07.5-0035)
    • Mixture Formation -- Self-Diagnostic System -- 129 Chassis
      • Self-Diagnostic System
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000B
          • Notes
          • Hot-film mass air flow sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-04B
          • Fault code description - ME-SFI - hot film mass air flow sensor - AD07.61-P-4000-01B
          • Pressure sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-06A
          • Fault code description - ME-SFI - pressure sensor - AD07.61-P-4000-02A
          • Intake air temperature sensor - ME-SFI gasoline injection - Testing electrical system - AD07.61-P-6000-05A
          • Fault code description - ME-SFI - intake air temperature sensor - AD07.61-P-4000-03A
          • Coolant temperature sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-08A
          • Fault code description - ME-SFI - coolant temperature sensor - AD07.61-P-4000-04A
          • Throttle valve actuator signal - ME-SFI idle speed control/electronic accelerator - Testing electrics - AD07.61-P-6002-03A
          • ME-SFI actual value potentiometer in the throttle valve actuator, fault code description - AD07.61-P-4000-48A
          • Right O sensor signal upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-11A
          • Fault code description - ME-SFI - oxygen sensor signal - AD07.61-P-4000-06A
          • O2 Fault code description - ME-SFI - ageing of oxygen sensor upstream of TWC - AD07.61-P-4000-07A
          • Right O2 sensor heating in front of the TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-13A
          • Oxygen sensor heating, fault code description ME-SFI - AD07.61-P-4000-08A
          • Oxygen sensor signal on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-15A
          • Oxygen sensor heating on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-17A
          • Left O2 sensor signal opstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-10A
          • Left O2 sensor heating upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-12A
          • Oxygen sensor signal on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-14A
          • Oxygen sensor heating on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-16A
          • Self-adaption of mixture formation to limit, fault code description ME-SFI - AD07.61-P-4000-09A
          • Fuel injection (Y62/1) - ME-SFI gasoline injection system - Timing electrical system - AD07.61-P-6000-18A
          • Fault code description - ME-SFI - fuel injectors - AD07.61-P-4000-10B
          • Fuel injector (Y62/2) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-19B
          • Fuel injector (Y62/3) - ME-SFI gasoline injection system - AD07.61-P-6000-20B
          • Fuel injector (Y62/4) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-21B
          • Fuel injector (Y62/5) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-22B
          • Fuel injector (Y62/6) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-23B
          • Fuel injector (Y62/7) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-38A
          • Fuel injector (Y62/8) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-39A
          • Primary voltage (T1/1) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-11A
          • Primary voltage (T1/2) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-12B
          • Primary voltage (T1/3) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-13B
          • Primary voltage (T1/4) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-14B
          • Primary voltage (T1/5) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-15B
          • Primary voltage (T1/6) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-16B
          • Primary voltage (T1/7) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-20A
          • Primary voltage (T1/8) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-21A
          • Ignitin voltage - ME-SFI ignition system - testing electrics - AD07.61-P-6001-17B
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01A
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01B
          • Fault code description - ME-SFI - misfires - AD07.61-P-4000-11B
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BA
          • Notes
          • Fault code description - ME-SFI - knock sensor - AD07.61-P-4000-12A
          • Crankshaft position sensor Checking Electrical components for the ME-SFI ignition system - AD07.61-P-6001-09B
          • Fault code description - ME-SFI - crankshaft position sensor - AD07.61-P-4000-13A
          • Camshaft Hall sensor - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-10B
          • Fault code description - ME-SFI - camshaft Hall sensor - AD07.61-P-4000-14A
          • EGR transducer - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-27B
          • Exhaust gas recirculation malfunction, fault code description ME-SFI - AD07.61-P-4000-50B
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-24B
          • Air pump switchover valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-25A
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-26A
          • ME-SFI secondary air injection malfunction - Fault code description - AD07.61-P-4000-15A
          • Fault code description - three-way catalytic converter effect too low - AD07.61-P-4000-16B
          • Purge control valve vacuum control - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-30A
          • Purge system - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-31A
          • Regeneration system leaking ME-SFI fault code description - AD07.61-P-4000-17A
          • Purge control valve activation - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-29A
          • Fault code description - ME-SFI - purge control valve - AD07.61-P-4000-19A
          • Activated charcoal canister shutoff valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-32A
          • Tank pressusre sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-33A
          • Fault code description for activated charcoal canister shutoff valve, ME-SFI - AD07.61-P-4000-20A
          • Fault code description for tank pressure sensor, ME-SFI - AD07.61-P-4000-21A
          • Fault code description - ME-SFI - vehicle speed signal - AD07.61-P-4000-23A
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01C
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01D
          • Fault code description - ME-SFI - idle speed control - AD07.61-P-4000-24A
          • Fault code description for oil pressure sensor for cylinder cut-out-system, ME-SFI - AD07.61-P-4000-58B
          • ME-SFI gasoline injection system electrical system, check ME-SFI control module terminal 30 - AD07.61-P-6000-01B
          • ME-SFI control module, terminal 87 - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-02B
          • ME-SFI control module voltage supply - Fault code description - AD07.61-P-4000-59A
          • Cruise control push button Checking the electrical components of cruise control with an ME variable speed limiter - AD07.61-P-6003-01E
          • CAN data bus - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-34A
          • Fault code description - ME-SFI - CAN faulty - AD07.61-P-4000-26A
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BB
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000C
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000CA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000F
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000FB
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FC
    • Mixture Formation -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Engine test and setting operations - AR07.00-P-3000
          • Engine test and setting operations - AR07.00-P-3000WA
          • Engine test and setting operations - AR07.00-P-3000WB
          • Engine test and setting operations - AR07.00-P-3000WC
        • Check and adjust engine - AR07.00-P-3001
          • Check and adjust engine - AR07.00-P-3001WA
          • Check and adjust engine - AR07.00-P-3001WB
        • Test, regulate idle speed - AR07.00-P-3002
          • Test, regulate idle speed - AR07.00-P-3002WA
          • Test, regulate idle speed - AR07.00-P-3002WB
        • Test engine performance and exhaust emissions - AR07.00-P-3003
          • Test engine performance and exhaust emissions - AR07.00-P-3003WA
          • Test engine performance and exhaust emissions - AR07.00-P-3003WB
        • Extension to testing, adjusting engine - AR07.00-P-3004
          • Extension to testing, adjusting engine - AR07.00-P-3004WA
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WB
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WC
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9104AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9113AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9119AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9120AB
        • Removing and installing fuel rail with injection valves - AR07.03-P-1450D
        • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451
          • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451A
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451E
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451F
        • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452E
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452F
        • Remove/install injection valves (ME-SFI) - AR07.03-P-6520
          • Remove/install injection valves (ME-SFI) - AR07.03-P-6520A
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520E
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520F
        • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521E
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521F
        • Removing and installing injection valves - AR07.03-P-6522D
        • Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) - AR07.03-P-6570E
        • Removing and installing hot film mass air flow sensor - AR07.07-P-1453
          • Removing and installing hot film mass air sensor - AR07.07-P-1453D
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453E
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453F
        • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AA
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AG
        • Removing and installing diaphragm pressure regulator - AR07.17-P-1450D
        • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451E
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451F
        • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452
          • Removing and installing diaphragm pressure regulator (ME) - AR07.17-P-1452E
          • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452F
        • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453E
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453F
        • Removing and installing HFM/LH-SFI variable reference resistor - AR07.41-P-1459
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459E
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459F
          • Removing, installing HFM-SFI variable reference resistor - AR07.51-P-1459D
  • Lubrication System
    • Lubrication, Oil Cooling -- 129 Chassis
      • Testing & Repair
        • Measuring oil consumption - AR18.00-P-0025
          • Measuring oil consumption - AR18.00-P-0025AO
            • Notes
            • Matching oil consumption to dipstick indication - AR18.00-P-0025-01AO
          • Measure oil consumption - AR18.00-P-0025AV
        • Testing oil pressure - AR18.00-P-1250
          • Testing oil pressure - AR18.00-P-1250AO
          • Check oil pressure - AR18.00-P-1250D
        • Check oil level - AR18.00-P-3035-01A
        • Testing and repair work: Passenger cars: Engine lubrication, engine oil cooling - AR18.00-Z-9113AB
        • Testing and repair work: Passenger cars: Engine lubrication, engine oil cooling - AR18.00-Z-9120AB
        • Replacing oil pump chain - AR18.10-P-2140
          • Replacing oil pump chain - AR18.10-P-2140AO
            • Notes
            • Separating oil pump chain - AR18.10-P-2140-01AO
            • Riveting oil pump chain - AR18.10-P-2140-02AO
          • Replace the oil pump chain - AR18.10-P-2140V
            • Notes
            • Separate oil pump chain - AR18.10-P-2140-01V
            • Rivet oil pump chain - AR18.10-P-2140-02V
        • Remove, install oil pressure relief valve - AR18.10-P-5031GV
        • Remove/install oil pump - AR18.10-P-6020B
        • Removing/installing the oil filter housing - AR18.20-P-3471B
        • Remove/install oil/water heat exchanger at oil filter - AR18.30-P-3481C
        • Remove/install oil dipstick guide tube - AR18.40-P-3510BV
        • Remove oil level sensor, install - AR18.40-P-5111A
      • Maintenance
        • Engine oil and filter change - AP18.00-P-0101
          • Engine oil and filter change - AP18.00-P-0101AA
            • Notes
            • Suction off engine oil - AP18.00-P-0101-02Z
            • Removing left air cleaner housing - AP18.00-P-0101-05F
            • Replacing oil filter cartridge, draining oil filter - AP18.00-P-0101-06EA
            • Replacing oil filter cartridge, draining oil filter - AP18.00-P-0101-06ED
          • Engine oil and filter change - AP18.00-P-0101AF
            • Notes
            • Replace oil filter element, drain oil filter - AP18.00-P-0101-06EF
      • Repair & Adjustments
        • Changing engine oil and filter - RA18001040020X(18-0020)
          • Changing engine oil and filter - RA18001040020X(18-0020)
          • Engine oil and filter change - RA18001200020X(18-0020)
        • Oil circuit - RA18001040050X(18-0050)
        • Testing oil pressure - RA18001040070X(18-0070)
          • Testing oil pressure - RA18001040070X(18-0070)
          • Testing oil pressure and oil pressure sensor - RA18001190070X(18-0070)
        • Measuring oil consumption - RA18001040250X(18-0250)
        • Operation of oil filter - RA18001041000X(18-1000)
        • Removing and installing oil filter - RA18001041100X(18-1100)
          • Removing and installing oil filter - RA18001041100X(18-1100)
          • Removing and installing oil filter housing - RA18001201100X(18-1100)
          • Removing and installing oil filter housing - RA180B1191100X(18-1100)
        • Removing and installing oil pipes (oil filter - air-to-oil cooler) - RA1800104112X(18-1120)
          • Removing and installing oil pipes (oil filter - air-to-oil cooler) - RA1800104112X(18-1120)
          • Removing and installing oil return check valve in oil filter - RA18001191120X(18-1120)
          • Removing and installing oil lines (oil filter housing - air-to-oil cooler) - RA18001201120X(18-1120)
        • Pressure-testing oil-to-coolant heat exchanger - RA18001041370X(18-1370)
        • Removing and installing oil pump - RA18001042100X(18-2100)
          • Removing and installing oil pump - RA18001042100X(18-2100)
          • Removing and installing oil pump - RA18001192100X(18-2100)
          • Removing and installing oil pump - RA18001202100X(18-2100)
        • Replacing and riveting oil pump chain - RA18001042120X(18-2120)
        • Removing and installing oil pressure relief valve in oil pump - RA18001042150X(18-2150)
          • Removing and installing oil pressure relief valve in oil pump - RA18001042150X(18-2150)
          • Removing and installing oil pressure relief valve (oil pump) - RA18001192150X(18-2150)
          • Removing and installing oil pressure relief valve - RA18001202150X(18-2150)
        • Removing and installing oil shield at crankshaft - RA18001042180X(18-2180)
        • Function of electrical oil level indicator - RA18001043100X(18-3100)
          • Function of electrical oil level indicator - RA18001043100X(18-3100)
          • Electrical function of oil level indicator - RA18001193100X(18-3100)
        • Removing and installing oil level sensor - RA18001043300X(18-3300)
          • Removing and installing oil level sensor - RA18001043300X(18-3300)
          • Removing and installing oil level sensor - RA18001193300X(18-3300)
          • Removing and installing oil level sensor - RA18001203300X(18-3300)
        • Testing oil level sensor - RA18001043320X(18-3320)
        • Checking dipstick and guide tube - RA18001043500X(18-3500)
        • Removing and installing oil spray nozzles for pistons - RA1800104400X(18-4000)
        • Removing and installing oil spray nozzle for timing chain, engine 104.94/99 - RA18001044100X(18-4100)
        • Replacing oil non-return valve of chain tensioner - RA18001044150X(18-4150)
        • Operation of oil pressure gauge - RA1800104A090X(18-0090)
          • Operation of oil pressure gauge - RA1800104A090X(18-0090)
          • Function of oil pressure indicator - RA18001190090X(18-0090)
        • Technical Modifications Engine 104 Mechanical III - RA1800104TA00X
        • Function of oil filter - RA18001191110X(18-1110)
        • Removing and installing air-to-oil cooler - RA18001191300X(18-1300)
          • Removing and installing air-to-oil cooler - RA18001191300X(18-1300)
          • Removing and installing air-to-oil cooler - RA18001201300X(18-1300)
          • Removing and installing air-to-oil cooler - RA180B1041300X(18-1300)
        • Technical modifications Engine 119 Mechanical III - RA1800119TA00X
        • Removing and installing dipstick guide tube - RA18001200023X(18-0023)
        • Function of oil pump (compound oil pump) - RA1800120200X(18-2000)
        • Technical modifications Engine 120 Mechanical II - RA1800120TA00X
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
  • Mechanical
    • Air Intake, Turbo Charging -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9104AB
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9113AB
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9119AB
        • Testing and repair work: Passenger cars: Air intake, supercharging - AR09.00-Z-9120AB
        • Removing and installing air cleaner - AR09.10-P-1050
          • Removing and installing air cleaner - AR09.10-P-1050D
          • Removing/Installing Air Filter - AR09.10-P-1050E
          • Removing and installing air cleaner - AR09.10-P-1050F
        • Removing and installing air cleaner cross pipe - AR09.10-P-8031G
        • Removing and installing intake scoop - AR09.10-P-8221
          • Removing and installing intake air scoop - AR09.10-P-8221D
          • Removing and installing intake scoop - AR09.10-P-8221EB
          • Removing and installing intake scoop - AR09.10-P-8221FA
        • Removing and installing intake manifold - AR09.20-P-1310
          • Remove/install intake manifold - AR09.20-P-1310A
            • Notes
            • Intake manifold connection diagram - AR09.20-P-1310-01AC
            • Intake manifold connection diagram - AR09.20-P-1310-01AU
          • Removing and installing intake manifold - AR09.20-P-1310D
            • Notes
            • Connecting diagram of intake manifold - AR09.20-P-1310-01DA
            • Removing and installing ram manifold - AR09.20-P-1310-02DA
          • Removing and installing intake manifold - AR09.20-P-1310E
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01E
            • Tightening diagram for attaching intake manifold - AR09.20-P-1310-03E
            • Replacing intake manifold - AR09.20-P-1310-04E
          • Removing and installing intake manifold - AR09.20-P-1310EA
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01EA
            • Replacing intake manifold - AR09.20-P-1310-04EA
          • Removing and installing intake manifold - AR09.20-P-1310F
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01F
          • Removing and installing intake manifold - AR09.20-P-1310FA
            • Notes
            • Connection diagram of intake manifold - AR09.20-P-1310-01FA
        • Removing and installing resonance flap - AR09.20-P-1791D
      • Repair & Adjustments
        • Removing and installing air cleaner - RA09001040015X(09-0015)
          • Removing and installing air cleaner - RA09001040015X(09-0015)
          • Removing and Installing Air Cleaner - RA09001190015X(09-0015)
          • Cyclonic separator - RA0900KE20015X(09-0015)
        • Removing and installing intake air scoop - RA09001040060X(09-0060)
          • Removing and installing intake air scoop - RA09001040060X(09-0060)
          • Removing and Installing Intake Air Scoop - RA09001190060X(09-0060)
        • Technical Modifications Engine 119 Combustion KE Injection - RA0900119TA00X
        • Air cleaner - RA0900KE20010X(09-0010)
      • Component Modifications
        • Metal intermediate flange replaces rubber intermediate flange - BT09.20-P-0001-01A
        • Intake manifold with mount for intake noise muffler - BT09.20-P-0003-01A
    • Complete Engine -- General Information -- 129 Chassis
      • General Information
        • General information on inspecting cylinder walls - AH01.00-P-0300-01A
        • Bolt diagram cylinder head cover - AH01.20-P-5014-04AO
        • Information for cylinder head - AH01.30-P-1000
          • Notes on application of sealant to cylinder head gasket - AH01.30-P-1000-04V
          • Information on cylinder head contact surface - AH01.30-P-1000-05A
          • Information for assigning the cylinder head gaskets - AH01.30-P-1000-06V
        • Notes on application of sealant - AH01.40-P-1000
          • Notes on application of sealant timing case cover - AH01.40-P-1000-01B
          • Notes application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06A
        • Notes on application of sealant oil pan - AH01.45-P-0001-01D
    • Complete Engine -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Engine and model survey - RA01001040010X(01-0010)
          • Engine and model survey - RA01001040010X(01-0010)
          • Engine and model survey - RA01001190010X(01-0010)
          • Engine and model survey - RA01001200010X(01-0010)
        • Warning instructions when hood open - RA01001040085X(01-0085)
        • Testing compression pressure - RA01001040100X(01-0100)
          • Testing compression pressure - RA01001040100X(01-0100)
          • Testing compression pressure - RA01001190100X(01-0100)
          • Testing compression pressure, hazard warnings - RA01001200100X(01-0100)
        • Cranking engine at front of crankshaft - RA01001040120X(01-0120)
          • Cranking engine at front of crankshaft - RA01001040120X(01-0120)
          • Cranking engine at front of crankshaft - RA01001200120X(01-0120)
        • Testing cylinders for leaks - RA01001040150X(01-0150)
          • Testing cylinders for leaks - RA01001040150X(01-0150)
          • Testing cylinders for leaks - RA01001190150X(01-0150)
          • Testing cylinders for leaks - RA01001200150X(01-0150)
        • Inspecting cylinders with inspection lamp, assessing - RA01001040200X(01-0200)
          • Inspecting cylinders with inspection lamp, assessing - RA01001040200X(01-0200)
          • Inspecting cylinders with light probe, assessing cylinders - RA01001190200X(01-0200)
          • Inspecting cylinders with inspection lamp, assessing - RA01001200200X(01-0200)
        • Function description of crankcase ventilation - RA01001040400X(01-0400)
          • Function description of crankcase ventilation - RA01001040400X(01-0400)
          • Function description of crankcase ventilation - RA01001190400X(01-0400)
        • Oil drain pipe in bottom of crankcase, arrangement - RA01001040430X(01-0430)
        • Notes regarding crankcase - RA01001041000X(01-1000)
          • Notes regarding crankcase - RA01001041000X(01-1000)
          • Notes on crankcase - RA01001191000X(01-1000)
        • Dimensions for pressing in straight pins in crankcase - RA01001041020X(01-1020)
        • Measuring, boring and honing cylinder bores - RA01001041100X(01-1100)
          • Measuring, boring and honing cylinder bores - RA01001041100X(01-1100)
          • Installing cylinder liners - RA01001191100X(01-1100)
          • Measuring cylinder bores - RA01001201100X(01-1100)
        • Facing contact surface of crankcase - RA01001041200X(01-1200)
          • Facing contact surface of crankcase - RA01001041200X(01-1200)
          • Facing crankcase mating surface - RA01001191200X(01-1200)
        • Repairing threaded bores for cylinder head bolts - RA01001041220X(01-1220)
        • Cleaning, sealing main oil galleries - RA01001041300X(01-1300)
        • Replacing core plugs in crankcase - RA01001041400X(01-1400)
        • Removing and installing timing case cover - RA01001042100X(01-2100)
          • Removing and installing timing case cover - RA01001042100X(01-2100)
          • Removing and installing timing case cover - RA01001192100X(01-2100)
        • Removing and installing front cover at top - RA01001042120X(01-2120)
          • Removing and installing front cover at top - RA01001042120X(01-2120)
          • Removing and installing front covers at top - RA01001192120X(01-2120)
        • Replacing radial shaft seal in front cover at top - RA01001042140X(01-2140)
          • Replacing radial shaft seal in front cover at top - RA01001042140X(01-2140)
          • Replacing radial shaft seals in front covers at top - RA01001192140X(01-2140)
          • Replacing radial seals in the front covers - RA01001202140X(01-2140)
        • Removing and installing end cover - RA01001042220X(01-2220)
          • Removing and installing end cover - RA01001042220X(01-2220)
          • Removing and installing end cover - RA01001192220X(01-2220)
          • Removing and installing end cover - RA01001202220X(01-2220)
        • Checking for leaks at rear of engine - RA01001042240X(01-2240)
          • Checking for leaks at rear of engine - RA01001042240X(01-2240)
          • Checking rear of engine for leaks when running - RA01001192240X(01-2240)
        • Examining, tightening cylinder head bolts - RA01001044050X(01-4050)
        • Repairing spark plug threads - RA01001044070X(01-4070)
          • Repairing spark plug threads - RA01001044070X(01-4070)
          • Repairing spark plug threads - RA01001194070X(01-4070)
        • Examining, facing contact surface of cylinder head - RA01001044180X(01-4180)
          • Examining, facing contact surface of cylinder head - RA01001044180X(01-4180)
          • Checking cylinder head mating surface, facing - RA01001194180X(01-4180)
          • Checking, machining cylinder head contact surface - RA01001204180X(01-4180)
        • Widening camshaft bearing bores (repair size) - RA01001044190X(01-4190)
        • Servicing threads for camshaft bearing cap bolts - RA01001044192X(01-4192)
        • Cleaning, sealing oil longitudinal galleries in cylinder head - RA01001044300X(01-4300)
        • Sealing air gallery in cylinder head - RA01001044400X(01-4400)
        • Removing and installing engine - RA0100104A300X(01-0300)
          • Removing and installing engine - RA0100104A300X(01-0300)
          • Removing and installing engine - RA0100119A300X(01-0300)
        • Removing and installing engine air admission housing (combination support) - RA0100104A420X(01-0420)
        • Removing and installing cylinder head cover - RA0100104A500X(01-0500)
          • Removing and installing cylinder head cover - RA0100104A500X(01-0500)
          • Removing and installing cylinder head cover - RA0100104C500X(01-0500)
          • Removing and installing cylinder head covers - RA01001190500X(01-0500)
        • Cranking engine with starter - RA0100104B110X(01-0110)
          • Cranking engine with starter - RA0100104B110X(01-0110)
          • Cranking engine with starter - RA01001190110X(01-0110)
          • Cranking engine with starter - RA01001200110X(01-0110)
        • Technical Modifications Engine 104 Mechanical I - RA0100104TA00X
        • Hazard warnings when hood opened - RA01001190080X(01-0080)
        • Measuring, honing and silicon-lapping cylinder bores - RA01001191120X(01-1120)
        • Repairing tapped holes for transmission mounting - RA01001191240X(01-1240)
        • Removing and installing driver on camshaft - RA01001192130X(01-2130)
        • Notes on cylinder heads - RA01001194000X(01-4000)
        • Removing and installing cylinder heads - RA01001194150X(01-4150)
          • Removing and installing cylinder heads - RA01001194150X(01-4150)
          • Removing and installing cylinder heads - RA01001204150X(01-4150)
          • Removing and installing cylinder head - RA010A1044150X(01-4150)
        • Technical modifications Engine 119 Mechanical I - RA0100119TA00X
        • Removing and installing ventilation pipe (crankcase ventilation) - RA01001200450X(01-0450)
        • Technical modifications Engine 120 Mechanical I - RA0100120TA00X
        • Removing and installing oil sump - RA010A1043100X(01-3100)
          • Removing and installing oil sump - RA010A1043100X(01-3100)
          • Removing and installing oil sump - RA010B1193100X(01-3100)
      • Component Modifications
        • Rear suspension eyes of engine strengthened - BT01.00-P-0001-01A
    • Complete Engine -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Inspecting cylinders with light probe - AR01.00-P-0200AU
        • Testing compression pressure - AR01.00-P-1200B
        • Inspect cylinders for leaks - AR01.00-P-1300HV
          • Notes
          • Firing order - AR01.00-P-1300-03HA
        • Disconnecting and connecting engine wiring harness - AR01.00-P-2410
          • Disconnecting, connecting engine wiring harness - AR01.00-P-2410AO
          • Disconnecting and connecting engine wiring harness - AR01.00-P-2410AV
        • Testing and repair work: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AR01.00-Z-9113AB
        • Testing and repair work: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AR01.00-Z-9120AB
        • Connecting compression tester - AR01.10-P-0010-01AV
        • Cranking engine with starter. - AR01.10-P-0110V
        • Removing and installing engine - AR01.10-P-2400
          • Remove, install engine - AR01.10-P-2400AO
          • Removing and installing engine - AR01.10-P-2400CB
        • Removing, installing cylinder head cover - AR01.20-P-5014
          • Removing, installing cylinder head cover - AR01.20-P-5014AO
            • Notes
            • Checking correct location of gasket of cylinder head cover - AR01.20-P-5014-01AO
            • Inspecting correct installation of locating pins of cylinder head cover - AR01.20-P-5014-05AO
          • Remove/install cylinder head cover - AR01.20-P-5014B
            • Notes
            • Ensure gasket of cylinder head cover is correctly installed - AR01.20-P-5014-01B
          • Remove/install cylinder head cover - AR01.20-P-5014BV
        • Repairing spark plug thread - AR01.30-P-5440BV
          • Notes
          • Tap thread in spark plug hole and screw in threaded insert - AR01.30-P-5440-01B
          • Caulk threaded insert - AR01.30-P-5440-02B
        • Remove/install top front cover - AR01.30-P-5703AO
          • Notes
          • Detach/attach front cover - AR01.30-P-5703-01AO
        • Remove/install cylinder head - AR01.30-P-5800B
          • Notes
          • Checking cylinder head bolts - AR01.30-P-5800-03B
          • Tightening instructions for cylinder head bolts - AR01.30-P-5800-07B
          • Slackening diagram for cylinder head bolts - AR01.30-P-5800-09B
        • Repairing threaded holes for cylinder head bolts - AR01.40-P-1220AO
        • Screw diagram for timing case cover - AR01.40-P-8000-01B
        • Detach/attach timing case cover - AR01.40-P-8000-03AO
        • Remove/install timing case cover - AR01.40-P-8000AO
        • Remove/install timing case cover - AR01.40-P-8000B
        • Examining rear of engine for signs of external oil leaks, determining - AR01.40-P-8913-01AO
        • Remove/install the end cover - AR01.40-P-8913B
        • Chamfer cylinder bores - AR01.40-P-9201-01A
        • Chamfering cylinder bores - AR01.40-P-9201-01AW
        • Measuring, boring and honing cylinder bores - AR01.40-P-9201AA
        • Measure cylinder bores - AR01.40-P-9202AV
        • Oil pan bolt diagram - AR01.45-P-7500-06F
        • Removing and installing oil pan - AR01.45-P-7500AO
        • Remove/install oil pan - AR01.45-P-7500FD
        • Removing and installing shield in oil pan - AR01.45-P-7510AO
        • Remove/install bottom part of oil pan - AR01.45-P-7555VA
    • Crank Assembly -- 129 Chassis
      • General Information
        • Installation notes for crankshaft radial shaft seals - AH03.20-P-0001-01AO
      • Basic Knowledge
        • Belt pulley/vibration damper arrangement - GF03.30-P-1600-01C
        • Flywheel, two-mass flywheel, driven plate arrangement - GF03.30-P-8001-01B
        • Driven plate design - GF03.30-P-8002-01AO
      • Testing & Repair
        • Testing and repair work: Passenger cars: Crank assembly - AR03.00-Z-9113AB
        • Testing and repair work: Passenger cars: Crank assembly - AR03.00-Z-9120AB
        • Piston removal and installation - AR03.10-P-7021AV
          • Notes
          • Assigning normal-size pistons to cylinder bore - AR03.10-P-7021-02AO
        • Remove/install piston rings - AR03.10-P-7311
          • Remove/install piston rings - AR03.10-P-7311AO
          • Remove/install piston rings - AR03.10-P-7311BV
            • Notes
            • Measure end clearance of piston rings - AR03.10-P-7311-01V
            • Measure piston ring end clearance - AR03.10-P-7311-02V
        • Replace front crankshaft radial seal ring - AR03.20-P-3000B
          • Notes
          • Install front crankshaft radial seal - AR03.20-P-3000-01B
        • Replacing rear crankshaft radial seal - AR03.20-P-3063
          • Replacing rear crankshaft radial seal - AR03.20-P-3063AO
            • Notes
            • Installing rear crankshaft radial seal - AR03.20-P-3063-01AO
          • Replace rear crankshaft radial sealing ring - AR03.20-P-3063B
            • Notes
            • Installing rear crankshaft radial seal - AR03.20-P-3063-01B
        • Remove/install crankshaft - AR03.20-P-4351BV
        • Remove/install belt pulley/vibration damper - AR03.30-P-1600C
        • Setting ring gear relevant to starter - AR03.30-P-4350AO
        • Removing and installing retaining lock for crankshaft/ring gear - AR03.30-P-5000
          • Removing and installing retaining lock for crankshaft/ring gear - AR03.30-P-5000AO
          • Remove/install retaining lock for crankshaft / ring gear - AR03.30-P-5000B
        • Remove/install flywheel / drive plate - AR03.30-P-8001C
        • Removing and installing driven plate - AR03.30-P-8003AO
        • Replacing ring gear of driven plate - AR03.30-P-8313AO
      • Repair & Adjustments
        • Removing and installing crankshaft - RA03001041800X(03-1800)
          • Removing and installing crankshaft - RA03001041800X(03-1800)
          • Removing and installing crankshaft - RA03001201800X(03-1800)
        • Checking, replacing and tightening conrod bolts - RA03001043100X(03-3100)
          • Checking, replacing and tightening conrod bolts - RA03001043100X(03-3100)
          • Checking, replacing and tightening conrod bolts - RA03001193100X(03-3100)
          • Checking, replacing, and tightening conrod bolts - RA03001203100X(03-3100)
        • Servicing, aligning and mounting conrod bearings - RA03001043130X(03-3130)
          • Servicing, aligning and mounting conrod bearings - RA03001043130X(03-3130)
          • Repairing and aligning conrod - RA03001193130X(03-3130)
          • Repairing and aligning conrod - RA03001203130X(03-3130)
        • Removing and installing pistons - RA03001043160X(03-3160)
          • Removing and installing pistons - RA03001043160X(03-3160)
          • Removing and installing pistons - RA03001193160X(03-3160)
          • Removing and installing pistons - RA03001203160X(03-3160)
        • Matching pistons and piston dimensions - RA03001043165X(03-3165)
          • Matching pistons and piston dimensions - RA03001043165X(03-3165)
          • Pistons, matching and dimensions - RA03001193165X(03-3165)
        • Replacing piston rings - RA03001043170X(03-3170)
          • Replacing piston rings - RA03001043170X(03-3170)
          • Replacing piston rings - RA03001193170X(03-3170)
        • Examining and repairing crankshaft - RA03001043180X(03-3180)
        • Crankshaft machining dimensions and identifications - RA03001043190X(03-3190)
        • Measuring crankshaft, fitting new bearings - RA03001043200X(03-3200)
          • Measuring crankshaft, fitting new bearings - RA03001043200X(03-3200)
          • Mounting crankshaft in bearings - RA03001203200X(03-3200)
          • Mounting crankshaft in bearings - RA030A1193200X(03-3200)
          • Mounting crankshaft in bearings - RA030B1193200X(03-3200)
        • Replacing front crankshaft radial seal - RA03001043240X(03-3240)
          • Replacing front crankshaft radial seal - RA03001043240X(03-3240)
          • Replacing front crankshaft radial seal - RA03001193240X(03-3240)
          • Replacing front crankshaft radial seal - RA03001203240X(03-3240)
        • Replacing rear crankshaft radial seal - RA03001043270X(03-3270)
          • Replacing rear crankshaft radial seal - RA03001043270X(03-3270)
          • Replacing rear crankshaft radial seal - RA03001193270X(03-3270)
        • Arrangement of belt pulley/vibration damper - RA03001043422X(03-3422)
        • Checking, correcting setting of TDC sensor - RA03001043450X(03-3450)
          • Checking, correcting setting of TDC sensor - RA03001043450X(03-3450)
          • Checking and correcting setting of TDC sensor - RA03001193450X(03-3450)
          • Checking, correcting setting of TDC sensor - RA03001203450X(03-3450)
        • Removing and installing driven plate with ring gear - RA03001044100X(03-4100)
          • Removing and installing driven plate with ring gear - RA03001044100X(03-4100)
          • Removing and installing driven plates - RA03001194100X(03-4100)
        • Function of two-mass flywheel - RA03001044600X(03-4600)
        • Removing and installing two-mass flywheel - RA03001044620X(03-4620)
        • Removing and installing needle bush in two-mass flywheel - RA03001044640X(03-4640)
        • Removing and installing retaining lock for crankshaft/ring gear - RA03001045000X(03-5000)
          • Removing and installing retaining lock for crankshaft/ring gear - RA03001045000X(03-5000)
          • Removing and installing retaining lock for crankshaft/ring gear - RA03001195000X(03-5000)
        • Removing and installing belt pulley of vibration damper and hub - RA03001193420X(03-3420)
          • Removing and installing belt pulley of vibration damper and hub - RA03001193420X(03-3420)
          • Removing and installing belt pulley/vibration damper - RA03001203420X(03-3420)
          • Removing and installing belt pulley/vibration damper - RA030A1043420X(03-3420)
        • Replacing ring gear - RA03001194300X(03-4300)
        • Adjusting clearance of ring gear to starter - RA03001194350X(03-4350)
        • Technical modifications Engine 119 Mechanical II - RA0300119TA00X
        • Technical modifications Engine 120 Mechanical I - RA0300120TA00X
    • Engine Suspension -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Engine suspension - AR22.00-Z-9113AB
        • Testing and repair work: Passenger cars: Engine suspension - AR22.00-Z-9120AB
        • Removing and installing engine mount - AR22.10-P-1100EV
        • Removing and installing rear engine mount - AR22.10-P-1160
          • Removing and installing rear engine mount - AR22.10-P-1160AO
          • Remove/install rear engine mount - AR22.10-P-1160V
        • Remove/install right engine support - AR22.10-P-4340EV
        • Removing, installing left engine support - AR22.10-P-4350EV
      • Repair & Adjustments
        • Removing and installing rear engine mount - RA22001042120X(22-2120)
          • Removing and installing rear engine mount - RA22001042120X(22-2120)
          • Removing and installing rear engine mount - RA2200119212X(22-2120)
        • Removing and installing engine carrier - RA22001042500X(22-2500)
          • Removing and installing engine carrier - RA22001042500X(22-2500)
          • Removing and installing engine carrier - RA22001192500X(22-2500)
          • Removing and installing engine carrier - RA22001202500X(22-2500)
        • Removing and installing front engine mounts - RA22001202110X(22-2110)
          • Removing and installing front engine mounts - RA22001202110X(22-2110)
          • Removing and installing front engine mounts - RA220A1042110X(22-2110)
          • Removing and installing front engine mounts - RA220B1192110X(22-2110)
    • Engine Timing -- Basic Knowledge -- 129 Chassis
      • Basic Knowledge
        • Design of chain tensioner - GF05.10-P-7801-01A
        • Timing chain drive, general - GF05.10-P-9611-01C
    • Engine Timing -- General Information -- 129 Chassis
      • General Information
        • General notes on timing, markings - AH05.10-P-1000-01A
        • Camshaft code number and assignment - AH05.20-N-0100-01A
        • Camshaft code number and assignment - AH05.20-P-0100-01AO
        • Notes on installing camshaft bearing bridge - AH05.20-P-2000-01AV
        • Marking of camshaft bearing caps - AH05.20-P-6992-01AO
    • Engine Timing -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Checking and replacing hydraulic valve clearance compensating elements (bucket tappets) - RA05001042110X(05-2110)
          • Checking and replacing hydraulic valve clearance compensating elements (bucket tappets) - RA05001042110X(05-2110)
          • Examining and replacing hydraulic valve clearance compensating elements (bucket tappets) - RA05001192110X(05-2110)
          • Checking and replacing hydraulic valve clearance compensation elements (bucket tappets) - RA05001202110X(05-2110)
        • Function of camshaft adjuster - RA05001042160X(05-2160)
          • Function of camshaft adjuster - RA05001042160X(05-2160)
          • Function of camshaft adjuster - RA05001202160X(05-2160)
        • Removing and installing camshaft adjuster - RA05001042170X(05-2170)
          • Removing and installing camshaft adjuster - RA05001042170X(05-2170)
          • Removing and installing camshaft adjuster - RA05001192170X(05-2170)
        • Armature and servo magnet at camshaft adjuster - RA05001042175X(05-2175)
          • Armature and servo magnet at camshaft adjuster - RA05001042175X(05-2175)
          • Armature and solenoid at camshaft adjuster - RA05001192175X(05-2175)
        • Removing and installing follower at camshaft - RA05001042178X(05-2178)
        • Matching bolts to camshaft - RA05001042180X(05-2180)
        • Matching camshaft adjuster parts - RA05001042190X(05-2190)
          • Matching camshaft adjuster parts - RA05001042190X(05-2190)
          • Matching parts of camshaft adjusters - RA05001192190X(05-2190)
        • Removing and installing camshafts - RA05001042200X(05-2200)
          • Removing and installing camshafts - RA05001042200X(05-2200)
          • Removing and installing camshafts - RA05001192200X(05-2200)
        • Matching camshafts and mounting - RA05001042210X(05-2210)
        • Replacing threaded bush in front of camshaft - RA05001042218X(05-2218)
        • Replacing end cover in camshafts - RA05001042220X(05-2220)
        • Checking basic position of camshafts - RA05001042230X(05-2230)
          • Checking basic position of camshafts - RA05001042230X(05-2230)
          • Checking, adjusting basic setting of camshafts - RA05001192230X(05-2230)
          • Checking basic setting of camshafts - RA05001202230X(05-2230)
        • Adjusting basic position of camshafts - RA05001042240X(05-2240)
          • Adjusting basic position of camshafts - RA05001042240X(05-2240)
          • Adjusting basic setting of camshafts - RA05001202240X(05-2240)
        • Removing and installing valve springs - RA05001042500X(05-2500)
          • Removing and installing valve springs - RA05001042500X(05-2500)
          • Removing and installing valve springs - RA05001192500X(05-2500)
        • Examining valve springs - RA05001042600X(05-2600)
          • Examining valve springs - RA05001042600X(05-2600)
          • Inspecting valve springs - RA05001192600X(05-2600)
        • Replacing valve stem seals - RA05001042700X(05-2700)
          • Replacing valve stem seals - RA05001042700X(05-2700)
          • Replacing valve stem seals - RA05001192700X(05-2700)
        • Checking valve guides - RA05001042845X(05-2845)
          • Checking valve guides - RA05001042845X(05-2845)
          • Checking valve guides - RA05001192845X(05-2845)
          • Checking valve guides - RA05001202845X(05-2845)
        • Replacing valve guides - RA05001042850X(05-2850)
          • Replacing valve guides - RA05001042850X(05-2850)
          • Replacing valve guides - RA05001192850X(05-2850)
        • Replacing valve seat rings - RA05001042900X(05-2900)
          • Replacing valve seat rings - RA05001042900X(05-2900)
          • Replacing valve seat rings - RA05001192900X(05-2900)
        • Machining valve seat rings - RA05001042910X(05-2910)
          • Machining valve seat rings - RA05001042910X(05-2910)
          • Machining valve seat rings - RA05001192910X(05-2910)
          • Machining valve seat rings - RA05001202910X(05-2910)
        • Removing and installing chain tensioner - RA05001043100X(05-3100)
          • Removing and installing chain tensioner - RA05001043100X(05-3100)
          • Removing and installing chain tensioner - RA05001193100X(05-3100)
          • Removing and installing chain tensioner - RA05001203100X(05-3100)
        • Replacing and riveting timing chain - RA05001043200X(05-3200)
          • Replacing and riveting timing chain - RA05001043200X(05-3200)
          • Replacing and riveting timing chain - RA05001193200X(05-3200)
        • Removing and installing tensioning rail - RA05001043300X(05-3300)
          • Removing and installing tensioning rail - RA05001043300X(05-3300)
          • Removing and installing tensioning rail - RA05001193300X(05-3300)
          • Removing and installing tensioning rail - RA05001203300X(05-3300)
        • Removing and installing guide rail in crankcase - RA05001043350X(05-3350)
          • Removing and installing guide rail in crankcase - RA05001043350X(05-3350)
          • Removing and installing guide rails at top of cylinder head - RA05001193350X(05-3350)
        • Removing and installing friction rail in crankcase - RA05001043360X(05-3360)
        • Removing and installing guide rail in cylinder head - RA05001043400X(05-3400)
          • Removing and installing guide rail in cylinder head - RA05001043400X(05-3400)
          • Removing and installing guide rail in crankcase - RA05001193400X(05-3400)
          • Removing and installing crankcase guide rail - RA05001203400X(05-3400)
        • Removing and installing guide sprocket, engine 104.98 - RA05001044400X(05-4400)
        • Removing and installing crankshaft sprocket - RA05001044600X(05-4600)
        • Technical Modifications Engine 104 Mechanical II - RA0500104TA00X
        • Checking timing of camshafts - RA05001192150X(05-2150)
          • Checking timing of camshafts - RA05001192150X(05-2150)
          • Checking camshaft timing - RA05001202150X(05-2150)
        • Removing and installing valves - RA05001192550X(05-2550)
        • Inspecting and machining valves - RA05001192800X(05-2800)
        • Removing and installing slide rails (arrangement) - RA05001193330X(05-3330)
        • Technical modifications Engine 119 Mechanical II - RA0500119TA00X
        • Removing and installing guide rails in cylinder heads - RA05001203450X(05-3450)
        • Removing, installing and sealing timing case guide rail - RA05001203500X(05-3500)
        • Technical modifications Engine 120 Mechanical II - RA0500120TA00X
      • Miscellaneous Notes
        • Disposal of sodium-filled valves - OS05.30-P-0001-01A
    • Engine Timing -- Safety Precautions -- 129 Chassis
      • Safety Precautions
        • Risk of explosion and poisoning - AS05.30-Z-0001-01A
    • Engine Timing -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Remove/install hydraulic valve clearance compensation elements - AR05.00-P-2011B
        • Testing and repair work: Passenger cars: Engine timing - AR05.00-Z-9113AB
        • Testing and repair work: Passenger cars: Engine timing - AR05.00-Z-9120AB
        • Check the engine valve timing - AR05.10-P-6858V
        • Replacing timing chain - AR05.10-P-7601
          • Replacing timing chain - AR05.10-P-7601AA
            • Notes
            • Separate timing chain - AR05.10-P-7601-01AV
            • Rivet timing chain - AR05.10-P-7601-02AV
            • Drawing in timing chain - AR05.10-P-7601-04AV
          • Replacing timing chain - AR05.10-P-7601AO
            • Notes
            • Separating timing chain - AR05.10-P-7601-01AO
            • Riveting timing chain - AR05.10-P-7601-02AO
          • Replacing timing chain - AR05.10-P-7601AV
        • Remove/install chain tensioner - AR05.10-P-7800C
        • Remove/install slide rail in timing case cover - AR05.10-P-8484V
        • Remove/install rocker arms - AR05.20-P-2340AU
        • Removing/installing the rocker arm shaft - AR05.20-P-2350AU
        • Set the basic position of camshafts - AR05.20-P-6020AU
        • Removing and installing camshafts - AR05.20-P-6992
          • Removing and installing camshafts - AR05.20-P-6992AO
            • Notes
            • Removing and installing camshafts at cylinder head - AR05.20-P-6992-09A
          • Remove/install camshafts - AR05.20-P-6992AU
        • Remove/install camshaft bearing bridge - AR05.20-P-7103
          • Remove/install camshaft bearing bridge - AR05.20-P-7103AU
          • Remove, install camshaft bearing bridge - AR05.20-P-7103AV
        • Removing and installing camshaft adjuster - AR05.20-P-7201AO
          • Notes
          • Removing camshaft adjuster from inlet camshaft - AR05.20-P-7201-01AO
          • Fitting camshaft adjuster to inlet camshaft - AR05.20-P-7201-02AO
        • Remove/install valve springs and / or valve stem seals - AR05.30-P-3500
          • Removing and installing valve springs and/or valve stem seals - AR05.30-P-3500AO
          • Remove/install valve springs and / or valve stem seals - AR05.30-P-3500B
            • Notes
            • Replace valve stem seals - AR05.30-P-3500-02A
        • Removing and installing valve springs and valve stem seals - AR05.30-P-3510-02AO
        • Remove/install valves - AR05.30-P-3511AV
        • Checking, removing and installing valve guides - AR05.30-P-3731
          • Checking, removing and installing valve guides - AR05.30-P-3731AO
            • Notes
            • Knocking out valve guide - AR05.30-P-3731-01AO
            • Reaming out basic bore to standard size I - AR05.30-P-3731-02AO
            • Inserting and checking valve guide - AR05.30-P-3731-03AO
            • Reaming out base bore to repair size I - AR05.30-P-3731-04AO
          • Check, remove, install valve guides - AR05.30-P-3731AV
            • Notes
            • Knocking out valve guide - AR05.30-P-3731-01AV
            • Insert valve guide, inspect - AR05.30-P-3731-03AV
            • Ream basic bore to repair stage I - AR05.30-P-3731-04AV
            • Inspect valve guides - AR05.30-P-3731-06AV
        • Replace valve seat rings - AR05.30-P-3831AV
        • Check valves - AR05.30-P-4201-01AV
  • Starter
    • Electrical System - Engine -- 129 Chassis
      • General Information
        • Notes on avoiding damage to ignition system - AH15.10-P-0002
          • Notes on avoiding damage to ignition system - AH15.10-P-0002-01D
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01E
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01F
        • General notes on contactless high voltage distribution - AH15.10-P-1002
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WA
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WD
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WE
        • General notes on testing contactless high voltage distribution - AH15.10-P-1003-01W
      • Safety Precautions
        • Risk of death caused by contact with parts conducting high voltages. - AS15.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9104AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9113AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9119AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9120AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9129AA
        • Remove, install camshaft Hall sensor - AR15.10-P-2000A
        • Test rotorless high voltage distribution - AR15.10-P-3000
          • Test rotorless high voltage distribution - AR15.10-P-3000WA
          • Test rotorless high voltage distribution - AR15.10-P-3000WD
          • Test rotorless high voltage distribution - AR15.10-P-3000WE
        • Replacing ignition cables with M3 cable screw - AR15.12-P-0512G
        • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928E
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928F
        • Removing and installing ignition coils - AR15.12-P-2003
          • Remove/install ignition coils - AR15.12-P-2003A
          • Removing and installing ignition coils - AR15.12-P-2003E
          • Removing and installing ignition coils - AR15.12-P-2003EA
          • Removing and installing ignition coils - AR15.12-P-2003F
          • Removing and installing ignition coils - AR15.12-P-2003FA
          • Remove/install ignition coils - AR15.12-P-2003G
        • Removing and installing crankshaft position sensor - AR15.12-P-2133
          • Remove/install crankshaft position sensor - AR15.12-P-2133A
          • Removing and installing crankshaft position sensor - AR15.12-P-2133E
          • Removing and installing crankshaft position sensor - AR15.12-P-2133EA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133F
          • Removing and installing crankshaft position sensor - AR15.12-P-2133FA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133G
        • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143
          • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143E
            • Notes
            • Checking, adjusting clearance of camshaft position sensor/camshaft sprocket segment - AR15.12-P-2143-01A
          • Removing and installing, adjustable camshaft position sensor - AR15.12-P-2143G
        • Replacing knock sensor - AR15.12-P-2183G
        • Remove/install knock sensors - AR15.12-P-2184
          • Remove/install knock sensors - AR15.12-P-2184A
          • Remove/install knock sensors - AR15.12-P-2184E
          • Remove/install knock sensors - AR15.12-P-2184EA
          • Remove/install knock sensors - AR15.12-P-2184F
        • Servicing wiring harness - AR15.18-P-0500A
        • Removing and installing starter - AR15.30-P-7100
          • Removing and installing starter - AR15.30-P-7100C
          • Remove starter, install - AR15.30-P-7100CS
          • Removing and installing starter - AR15.30-P-7100EC
        • Prerequisites for testing alternator - AR15.40-P-5009C
        • Checking regulation voltage of alternator - AR15.40-P-5010C
        • Testing alternator charging current - AR15.40-P-5011C
        • Removing and installing generator - AR15.40-P-5032
          • Removing and installing generator - AR15.40-P-5032CA
          • Removing and installing generator - AR15.40-P-5032CS
          • Remove and install generator - AR15.40-P-5032CT
        • Remove/install generator pulleys - AR15.40-P-5710
          • Removing and installing the generator poly-V-pulley - AR15.40-P-5710CS
          • Remove/install generator belt pulley - AR15.40-P-5710GF
        • Removing and installing regulator of generator - AR15.40-P-5760CS
        • Test diodes of generator - AR15.40-P-9301-02EA
      • Maintenance
        • Replace spark plugs - AP15.10-P-1580
          • Replace spark plugs - AP15.10-P-1580AC
          • Replace spark plugs - AP15.10-P-1580CA
      • Retrofitting & Conversion
        • Retrofitting smaller poly V-belt pulley and aluminum fan wheel - AN15.40-P-5700CS
      • Repair & Adjustments
        • Replacing ignition cables with M3 cable screw - RA15001040512X(15-0512)
        • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing Spark Plugs - RA15001191031X(15-1031)
        • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and Installing Ignition Coils - RA15001192001X(15-2001)
        • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and Installing EZL/AKR Control Unit - RA15001192093X(15-2093)
        • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and Installing Crankshaft Position Sensor - RA15001192133X(15-2133)
        • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and Installing Camshaft Position Sensor - RA15001192143X(15-2143)
        • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
          • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
        • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing Knock Sensors - RA15001192183X(15-2183)
          • Removing and Installing EZL/AKR Resistance Trimming Coupling - RA15001192153X(15-2153)
        • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and Installing Engine Systems Control Unit (MAS) - RA15001192193X(15-2193)
        • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and Installing High Voltage Distributor - RA15001193010X(15-3010)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA15001045TA00X
        • Replacing Ignition Cables with M3 Cable Screw - RA15001191476X(15-1476)
        • Technical Modifications Engine 119 Combustion KE Injection - RA1500119TA00X
        • Notes regarding working on breakerless ignition system - RA1500FLH0010X(15-0010)
        • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3A020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3B020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3C020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3D020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3E020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3F020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3I020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3K020X(15-0020)
        • Function of breakerless transistorized ignition system without series resistors with hybrid ignition control unit (TSZ) - RA1500KE20015X(15-0015)
        • Engine systems control unit (MAS) - RA1500KE30030X(15-0030)
        • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3B025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3C025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3D025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3E025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3F025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3G025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3H025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3I025X(15-0025)
          • RA1500KE3J025X
      • Component Modifications
        • High voltage distributor cap, high voltage distributor rotor - BT15.12-P-0001-01A
        • High voltage distributor rotor with stiffening ribs - BT15.12-P-0002-01A
• Engine Performance
  • Engine Controls - On-Vehicle Adjustments
    • Camshaft Position Sensor
      • 2.3L, 2.8L & 3.2L
        • Notes
        • Removal
        • Installation & Adjustment
    • Valve Clearance
    • Ignition Timing
    • Idle Speed & Mixture
      • Notes
      • Cold (Fast) Idle
    • Electronic Diesel Control (EDC)
      • TDC Sensor Bracket
        • Notes
        • Checking & Adjusting
  • Application
    • Introduction
      • Introduction
      • Model/Year VIN Code Applications
      • Engine Code Location
  • Emissions
    • Emission Applications
      • Emission Applications
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
  • Engine Control Systems
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
  • Fuel Delivery
    • Fuel System -- 129 Chassis
      • Basic Knowledge
        • Fuel pump assembly overview - GF47.20-P-0025-02A
        • Purge control valve, location/task/design/function - GF47.30-P-4030L
      • Safety Precautions
        • Risk of explosion caused by fuel Igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel. - AS47.00-Z-0001-01A
      • Testing & Repair
        • Removing and installing fuel cooler - AR47.00-P-3061F
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9104AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9113AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9119AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9120AB
        • Testing and repair work: Passenger cars: Fuel system - AR47.00-Z-9129AA
        • Draining and filling fuel tank - AR47.10-P-4001F
        • Remove/install fuel tank - AR47.10-P-4100
          • Remove/install fuel tank - AR47.10-P-4100D
            • Notes
            • Removing fuel tank - AR47.10-P-4100-01DD
          • Removing and installing fuel tank - AR47.10-P-4100FA
        • Removing and installing fuel gauge sensor - AR47.10-P-7000FA
        • Removing and installing guide funnel - AR47.10-P-7571D
        • Remove/install fuel pump - AR47.20-P-5710MA
        • Removing and installing fuel pumps - AR47.20-P-5713
          • Removing and installing fuel pumps - AR47.20-P-5713B
          • Removing and installing fuel pumps - AR47.20-P-5713D
          • Removing and installing fuel pumps - AR47.20-P-5713F
        • Removing and installing check valve for fuel pump - AR47.20-P-5820
          • Removing and installing check valve for fuel pump - AR47.20-P-5820D
          • Removing and installing check valve for fuel pump - AR47.20-P-5820F
        • Removing and installing activated charcoal filter - AR47.30-P-8212
          • Removing and installing activated charcoal filter - AR47.30-P-8212B
            • Notes
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01DH
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01DJ
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01EC
          • Removing and installing activated charcoal canister - AR47.30-P-8212D
            • Notes
            • Connecting diagram of evaporation emission control system - AR47.30-P-8212-01DA
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01EA
            • Function diagram of evaporative emission control system - AR47.30-P-8212-01EB
          • Removing and installing activated charcoal canister - AR47.30-P-8212FA
            • Notes
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01FA
            • Connection diagram of evaporative emission control system - AR47.30-P-8212-01FB
        • Removing and installing safety valve - AR47.31-P-8022B
        • Remove shutoff valve, install - AR47.31-P-8023B
      • Repair & Adjustments
        • Removing and installing fuel tank - RA47001044100X(47-4100)
          • Removing and installing fuel tank - RA47001044100X(47-4100)
          • Removing and Installing Fuel Tank - RA47001194100X(47-4100)
          • Removing and installing fuel tank - RA47LH1044100X(47-4100)
        • Removing and installing fuel gauge sending unit - RA47001047000X(47-7000)
          • Removing and installing fuel gauge sending unit - RA47001047000X(47-7000)
          • Removing and Installing Fuel Gauge Sending Unit - RA7001197000X(47-7000)
          • Removing and installing fuel gauge sending unit - RA47LH1047000X(47-7000)
        • Removing and installing guide funnel - RA47001047571X(47-7571)
          • Removing and installing guide funnel - RA47001047571X(47-7571)
          • Removing and Installing Guide Funnel - RA47001197571X(47-7571)
          • Removing and installing guide funnel - RA47LH1047571X(47-7571)
        • Removing and installing charcoal canister - RA47001048212X(47-8212)
          • Removing and installing charcoal canister - RA47001048212X(47-8212)
          • Removing and Installing Activated Charcoal Canister - RA47001198212X(47-8212)
          • Removing and installing activated charcoal filter - RA47LH1048212X(47-8212)
        • Removing and installing regeneration switchover valve (fuel evaporation) - RA47001048252X(47-8252)
          • Removing and installing regeneration switchover valve (fuel evaporation) - RA47001048252X(47-8252)
          • Removing and Installing Regeneration Switchover Valve (Fuel Evaporation Control System) - RA47001198252X(47-8252)
          • Removing and installing regeneration switchover valve (fuel evaporation) - RA47LH1048252X(47-8252)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA4700104TA00X
        • Fuel cooler - RA4700FLH0005X(47-0005)
          • Fuel cooler - RA4700FLH0005X(47-0005)
          • Fuel cooler - RA4700KE30005X(47-0005)
        • Fuel tank with splash bowl - RA4700FLH0010X(47-0010)
          • Fuel tank with splash bowl - RA4700FLH0010X(47-0010)
          • Fuel Gauge Sender - RA4700HFM0010X(47-0010)
          • Fuel tank with splash bowl - RA4700KE30010X(47-0010)
        • Fuel gauge sensor - RA4700FLH0020X(47-0020)
          • Fuel gauge sensor - RA4700FLH0020X(47-0020)
          • Fuel Tank - RA4700HFM0020X(47-0020)
          • Fuel gauge sensor - RA4700KE30020X(47-0020)
        • Fuel tank positive and negative ventilation system - RA4700FLH0030X(47-0030)
          • Fuel tank positive and negative ventilation system - RA4700FLH0030X(47-0030)
          • Function Diagram of Fuel Evaporation Control System - RA4700HFM0030X(47-0030)
          • Fuel tank air admission and ventilation - RA4700KE30030K(47-0030)
        • Fuel evaporation control system - RA4700FLH0200X(47-0200)
          • Fuel evaporation control system - RA4700FLH0200X(47-0200)
          • Fuel evaporation system - RA4700KE30200X(47-0200)
        • Function of Fuel Evaporation Control System - RA4700HFM0040X(47-0040)
        • Removing and installing, replacing fuel cooler - RA47LH1043061X(47-3061)
        • Removing and installing fuel expansion tank (models with skibag) - RA47LH1048021X(47-8021)
      • Component Modifications
        • Lever sender replaces immersed pipe sender - BT47.10-P-0001-01A
        • Screw spindle pump replaces double fuel pump unit - BT47.20-P-0001-01A
      • Miscellaneous Notes
        • Disposing of fuel tanks - OS47.10-P-0001-01A
    • Mixture Formation -- Component Modifications -- 129 Chassis
      • Component Modifications
        • LH-SFI fuel injection valves modified - BT07.03-P-0001-01A
        • O-ring at fuel injection valve modified - BT07.03-P-0002-02A
        • LH-SFI variable reference resistor modified - BT07.41-P-0001-01A
    • Mixture Formation -- General Information -- 129 Chassis
      • General Information
        • Notes on actuations - AH07.00-P-3000
          • References to test conditions for engine testing and adjusting work - AH07.00-P-3000-01A
          • Notes on actual value screens - AH07.00-P-3000-02WA
          • Notes on actuations - AH07.00-P-3000-03WA
        • Notes regarding test conditions when testing engine output and exhaust gas - AH07.00-P-3003-01A
        • Notes on engine tests - AH07.00-P-3004
          • Notes on compression test - AH07.00-P-3004-01WA
          • Notes on smooth engine running test - AH07.00-P-3004-02WA
          • Notes on ignition circuit shutoff test - AH07.00-P-3004-03WA
    • Mixture Formation -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model Designation, Installation Survey - RA07031190001X(07.3-0001)
          • Model and components survey - RA0703KE10001X(07.3-0001)
        • Location of components - RA07031040005X(07.3-0005)
          • Location of components - RA07031040005X(07.3-0005)
          • Location of Components - RA07031190005X(07.3-0005)
        • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and Installing Starting Valve - RA07031191606X(07.3-1606)
        • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Conducting Fuel Quantity Comparison Measurement - RA07031191609X(07.3-1609)
        • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Testing, Adjusting Zero Position of Air Flow Sensor Plate - RA07031191612X(07.3-1612)
        • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and Installing KE Resistance Trimming Plug - RA07031191652X(07.3-1652)
        • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing Seal for Control Plunger - RA07031191660X(07.3-1660)
        • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and Installing Air Flow Sensor Plate - RA07031191665X(07.3-1665)
        • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and Installing Mixture Control Unit - RA07031191668X(07.3-1668)
        • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and Installing Diaphragm Pressure Regulator - RA07031191669X(07.3-1669)
        • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and Installing Fuel Distributor - RA07031191674X(07.3-1674)
        • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and Installing Fuel Accumulator - RA07031191683X(07.3-1683)
        • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and Installing Air Flow Sensor - RA07031191686X(07.3-1686)
        • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and Installing Coolant Temperature Sensor - RA07031191687X(07.3-1687)
        • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and Installing Overvoltage Protection - RA07031191688X(07.3-1688)
        • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and Installing Throttle Valve Switch - RA07031191689X(07.3-1689)
        • Removing and installing microswitch - RA07031041690X(07.3-1690)
        • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and Installing Intake Air Temperature Sensor - RA07031191691X(07.3-1691)
        • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191698X(07.3-1692)
        • Replacing vehicle speed Hall-effect sensor - RA07031041693X(07.3-1693)
        • Removing and installing CIS-E control unit - RA07031041698X(07.3-1698)
        • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and Installing Idle Speed Adjuster - RA07031192118X(07.3-2118)
        • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing Oxygen Sensor - RA07031195303X(07.3-5303)
        • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and Installing Fuel Filter - RA07031195563X(07.3-5563)
        • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and Installing Fuel Pumps - RA07031195713X(07.3-5713)
        • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and Installing Fuel Pump Set - RA07031195770X(07.3-5770)
        • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing Check Valve for Fuel Pump - RA07031195820X(07.3-5820)
        • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and Installing Rubber Pads for Fuel Pump Set - RA07031195860X(07.3-5860)
        • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and Installing Throttle Valve Assembly - RA07031196210X(07.3-6210)
        • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing Injection Valves - RA07031196500X(07.3-6500)
        • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and Installing Injection Valves - RA07031196520X(07.3-6520)
        • Programmed Repairs Engine 104 Combustion CIS-E Injection - RA0703104PR00X
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA0703104TA00X
        • KE Function Diagram - RA07031190003X(07.3-0003)
        • Technical Modifications Engine 119 Injection Combustion KE - RA0703119TA00X
        • Vehicle features - RA0703KE10004X(07.3-0004)
        • Function diagram KE injection system - RA0703KE10010X(07.3-0010)
        • Location of components - RA0703KE10015X(07.3-0015)
        • Influencing parameters at KE control unit - RA0703KE10020X(07.3-0020)
        • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation (continuation) - RA0703KE2E030X(07.3-0030)
        • Fuel supply - RA0703KE1B030X(B.)
        • Mixture formation - RA0703KE1C030X(C.)
        • Functions in the KE control unit - RA0703KE1D030X(D.)
        • Start devices - RA0703KE2F030X(F.)
        • Idle speed devices - RA0703KE2G030X(G.)
        • Installation survey - RA07041040001X(07.4-0001)
        • Removing and installing diaphragm pressure regulator - RA07041041450X(07.4-1450)
        • Removing and installing fuel distributor with injection valves - RA07041041451X(07.4-1451)
        • Removing and installing protective grille at air mass sensor - RA07041041452X(07.4-1452)
        • Removing and installing hot wire air mass sensor - RA07041041453X(07.4-1453)
        • Removing and installing LH resistance trimming plug - RA07041041459X(07.4-1459)
        • Removing and installing coolant temperature sensor - RA07041041462X(07.4-1462)
        • Removing and installing intake air temperature sensor - RA07041041465X(07.4-1465)
        • Removing and installing LH control unit - RA07041041470X(07.4-1470)
        • Replacing oxygen sensor - RA07041045303X(07.4-5303)
        • Removing and installing fuel filter - RA07041045563X(07.4-5563)
        • Removing and installing fuel pumps - RA07041045750X(07.4-5750)
        • Removing and installing fuel pump pack - RA07041045770X(07.4-5770)
        • Replacing check valve for fuel pumps - RA07041045820X(07.4-5820)
        • Removing and installing rubber blocks for fuel pump pack - RA07041045860X(07.4-5860)
        • Removing and installing injection valves - RA07041046520X(07.4-6520)
        • Renewing isolating sleeves and rubber rings (for injection valves) - RA07041046572X(07.4-6572)
        • Programmed repairs - RA0704104PR00X
        • Technical modifications - RA0704104TA00X
        • Vehicle features - RA0704FLH0004X(07.4-0004)
        • Function diagram - RA0704FLH0010X(07.4-0010)
        • Location of components - RA0704FLH0015X(07.4-0015)
        • Influencing parameters at control unit - RA0704FLH0020X(07.4-0020)
        • Design and function - RA0704FLH0030X(07.4-0030)
        • Vehicle Features - RA0705HFM004X(07.5-0004)
        • Function Diagram - RA0705HFM0010X(07.5-0010)
        • Location of Components - RA0705HFM0015X(07.5-0015)
        • Influencing Parameters at the Control Unit - RA0705HFM0020X(07.5-0020)
        • HFM Design and Function - RA0705HFM0030X(07.5-0030)
        • HFM Ignition System Design and Function - RA0705HFM0035X(07.5-0035)
    • Mixture Formation -- Self-Diagnostic System -- 129 Chassis
      • Self-Diagnostic System
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000B
          • Notes
          • Hot-film mass air flow sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-04B
          • Fault code description - ME-SFI - hot film mass air flow sensor - AD07.61-P-4000-01B
          • Pressure sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-06A
          • Fault code description - ME-SFI - pressure sensor - AD07.61-P-4000-02A
          • Intake air temperature sensor - ME-SFI gasoline injection - Testing electrical system - AD07.61-P-6000-05A
          • Fault code description - ME-SFI - intake air temperature sensor - AD07.61-P-4000-03A
          • Coolant temperature sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-08A
          • Fault code description - ME-SFI - coolant temperature sensor - AD07.61-P-4000-04A
          • Throttle valve actuator signal - ME-SFI idle speed control/electronic accelerator - Testing electrics - AD07.61-P-6002-03A
          • ME-SFI actual value potentiometer in the throttle valve actuator, fault code description - AD07.61-P-4000-48A
          • Right O sensor signal upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-11A
          • Fault code description - ME-SFI - oxygen sensor signal - AD07.61-P-4000-06A
          • O2 Fault code description - ME-SFI - ageing of oxygen sensor upstream of TWC - AD07.61-P-4000-07A
          • Right O2 sensor heating in front of the TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-13A
          • Oxygen sensor heating, fault code description ME-SFI - AD07.61-P-4000-08A
          • Oxygen sensor signal on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-15A
          • Oxygen sensor heating on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-17A
          • Left O2 sensor signal opstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-10A
          • Left O2 sensor heating upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-12A
          • Oxygen sensor signal on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-14A
          • Oxygen sensor heating on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-16A
          • Self-adaption of mixture formation to limit, fault code description ME-SFI - AD07.61-P-4000-09A
          • Fuel injection (Y62/1) - ME-SFI gasoline injection system - Timing electrical system - AD07.61-P-6000-18A
          • Fault code description - ME-SFI - fuel injectors - AD07.61-P-4000-10B
          • Fuel injector (Y62/2) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-19B
          • Fuel injector (Y62/3) - ME-SFI gasoline injection system - AD07.61-P-6000-20B
          • Fuel injector (Y62/4) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-21B
          • Fuel injector (Y62/5) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-22B
          • Fuel injector (Y62/6) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-23B
          • Fuel injector (Y62/7) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-38A
          • Fuel injector (Y62/8) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-39A
          • Primary voltage (T1/1) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-11A
          • Primary voltage (T1/2) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-12B
          • Primary voltage (T1/3) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-13B
          • Primary voltage (T1/4) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-14B
          • Primary voltage (T1/5) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-15B
          • Primary voltage (T1/6) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-16B
          • Primary voltage (T1/7) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-20A
          • Primary voltage (T1/8) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-21A
          • Ignitin voltage - ME-SFI ignition system - testing electrics - AD07.61-P-6001-17B
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01A
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01B
          • Fault code description - ME-SFI - misfires - AD07.61-P-4000-11B
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BA
          • Notes
          • Fault code description - ME-SFI - knock sensor - AD07.61-P-4000-12A
          • Crankshaft position sensor Checking Electrical components for the ME-SFI ignition system - AD07.61-P-6001-09B
          • Fault code description - ME-SFI - crankshaft position sensor - AD07.61-P-4000-13A
          • Camshaft Hall sensor - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-10B
          • Fault code description - ME-SFI - camshaft Hall sensor - AD07.61-P-4000-14A
          • EGR transducer - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-27B
          • Exhaust gas recirculation malfunction, fault code description ME-SFI - AD07.61-P-4000-50B
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-24B
          • Air pump switchover valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-25A
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-26A
          • ME-SFI secondary air injection malfunction - Fault code description - AD07.61-P-4000-15A
          • Fault code description - three-way catalytic converter effect too low - AD07.61-P-4000-16B
          • Purge control valve vacuum control - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-30A
          • Purge system - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-31A
          • Regeneration system leaking ME-SFI fault code description - AD07.61-P-4000-17A
          • Purge control valve activation - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-29A
          • Fault code description - ME-SFI - purge control valve - AD07.61-P-4000-19A
          • Activated charcoal canister shutoff valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-32A
          • Tank pressusre sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-33A
          • Fault code description for activated charcoal canister shutoff valve, ME-SFI - AD07.61-P-4000-20A
          • Fault code description for tank pressure sensor, ME-SFI - AD07.61-P-4000-21A
          • Fault code description - ME-SFI - vehicle speed signal - AD07.61-P-4000-23A
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01C
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01D
          • Fault code description - ME-SFI - idle speed control - AD07.61-P-4000-24A
          • Fault code description for oil pressure sensor for cylinder cut-out-system, ME-SFI - AD07.61-P-4000-58B
          • ME-SFI gasoline injection system electrical system, check ME-SFI control module terminal 30 - AD07.61-P-6000-01B
          • ME-SFI control module, terminal 87 - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-02B
          • ME-SFI control module voltage supply - Fault code description - AD07.61-P-4000-59A
          • Cruise control push button Checking the electrical components of cruise control with an ME variable speed limiter - AD07.61-P-6003-01E
          • CAN data bus - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-34A
          • Fault code description - ME-SFI - CAN faulty - AD07.61-P-4000-26A
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BB
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000C
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000CA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000F
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000FB
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FC
    • Mixture Formation -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Engine test and setting operations - AR07.00-P-3000
          • Engine test and setting operations - AR07.00-P-3000WA
          • Engine test and setting operations - AR07.00-P-3000WB
          • Engine test and setting operations - AR07.00-P-3000WC
        • Check and adjust engine - AR07.00-P-3001
          • Check and adjust engine - AR07.00-P-3001WA
          • Check and adjust engine - AR07.00-P-3001WB
        • Test, regulate idle speed - AR07.00-P-3002
          • Test, regulate idle speed - AR07.00-P-3002WA
          • Test, regulate idle speed - AR07.00-P-3002WB
        • Test engine performance and exhaust emissions - AR07.00-P-3003
          • Test engine performance and exhaust emissions - AR07.00-P-3003WA
          • Test engine performance and exhaust emissions - AR07.00-P-3003WB
        • Extension to testing, adjusting engine - AR07.00-P-3004
          • Extension to testing, adjusting engine - AR07.00-P-3004WA
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WB
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WC
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9104AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9113AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9119AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9120AB
        • Removing and installing fuel rail with injection valves - AR07.03-P-1450D
        • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451
          • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451A
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451E
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451F
        • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452E
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452F
        • Remove/install injection valves (ME-SFI) - AR07.03-P-6520
          • Remove/install injection valves (ME-SFI) - AR07.03-P-6520A
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520E
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520F
        • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521E
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521F
        • Removing and installing injection valves - AR07.03-P-6522D
        • Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) - AR07.03-P-6570E
        • Removing and installing hot film mass air flow sensor - AR07.07-P-1453
          • Removing and installing hot film mass air sensor - AR07.07-P-1453D
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453E
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453F
        • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AA
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AG
        • Removing and installing diaphragm pressure regulator - AR07.17-P-1450D
        • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451E
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451F
        • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452
          • Removing and installing diaphragm pressure regulator (ME) - AR07.17-P-1452E
          • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452F
        • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453E
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453F
        • Removing and installing HFM/LH-SFI variable reference resistor - AR07.41-P-1459
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459E
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459F
          • Removing, installing HFM-SFI variable reference resistor - AR07.51-P-1459D
  • Ignition System
    • Electrical System - Engine -- 129 Chassis
      • General Information
        • Notes on avoiding damage to ignition system - AH15.10-P-0002
          • Notes on avoiding damage to ignition system - AH15.10-P-0002-01D
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01E
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01F
        • General notes on contactless high voltage distribution - AH15.10-P-1002
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WA
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WD
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WE
        • General notes on testing contactless high voltage distribution - AH15.10-P-1003-01W
      • Safety Precautions
        • Risk of death caused by contact with parts conducting high voltages. - AS15.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9104AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9113AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9119AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9120AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9129AA
        • Remove, install camshaft Hall sensor - AR15.10-P-2000A
        • Test rotorless high voltage distribution - AR15.10-P-3000
          • Test rotorless high voltage distribution - AR15.10-P-3000WA
          • Test rotorless high voltage distribution - AR15.10-P-3000WD
          • Test rotorless high voltage distribution - AR15.10-P-3000WE
        • Replacing ignition cables with M3 cable screw - AR15.12-P-0512G
        • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928E
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928F
        • Removing and installing ignition coils - AR15.12-P-2003
          • Remove/install ignition coils - AR15.12-P-2003A
          • Removing and installing ignition coils - AR15.12-P-2003E
          • Removing and installing ignition coils - AR15.12-P-2003EA
          • Removing and installing ignition coils - AR15.12-P-2003F
          • Removing and installing ignition coils - AR15.12-P-2003FA
          • Remove/install ignition coils - AR15.12-P-2003G
        • Removing and installing crankshaft position sensor - AR15.12-P-2133
          • Remove/install crankshaft position sensor - AR15.12-P-2133A
          • Removing and installing crankshaft position sensor - AR15.12-P-2133E
          • Removing and installing crankshaft position sensor - AR15.12-P-2133EA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133F
          • Removing and installing crankshaft position sensor - AR15.12-P-2133FA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133G
        • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143
          • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143E
            • Notes
            • Checking, adjusting clearance of camshaft position sensor/camshaft sprocket segment - AR15.12-P-2143-01A
          • Removing and installing, adjustable camshaft position sensor - AR15.12-P-2143G
        • Replacing knock sensor - AR15.12-P-2183G
        • Remove/install knock sensors - AR15.12-P-2184
          • Remove/install knock sensors - AR15.12-P-2184A
          • Remove/install knock sensors - AR15.12-P-2184E
          • Remove/install knock sensors - AR15.12-P-2184EA
          • Remove/install knock sensors - AR15.12-P-2184F
        • Servicing wiring harness - AR15.18-P-0500A
        • Removing and installing starter - AR15.30-P-7100
          • Removing and installing starter - AR15.30-P-7100C
          • Remove starter, install - AR15.30-P-7100CS
          • Removing and installing starter - AR15.30-P-7100EC
        • Prerequisites for testing alternator - AR15.40-P-5009C
        • Checking regulation voltage of alternator - AR15.40-P-5010C
        • Testing alternator charging current - AR15.40-P-5011C
        • Removing and installing generator - AR15.40-P-5032
          • Removing and installing generator - AR15.40-P-5032CA
          • Removing and installing generator - AR15.40-P-5032CS
          • Remove and install generator - AR15.40-P-5032CT
        • Remove/install generator pulleys - AR15.40-P-5710
          • Removing and installing the generator poly-V-pulley - AR15.40-P-5710CS
          • Remove/install generator belt pulley - AR15.40-P-5710GF
        • Removing and installing regulator of generator - AR15.40-P-5760CS
        • Test diodes of generator - AR15.40-P-9301-02EA
      • Maintenance
        • Replace spark plugs - AP15.10-P-1580
          • Replace spark plugs - AP15.10-P-1580AC
          • Replace spark plugs - AP15.10-P-1580CA
      • Retrofitting & Conversion
        • Retrofitting smaller poly V-belt pulley and aluminum fan wheel - AN15.40-P-5700CS
      • Repair & Adjustments
        • Replacing ignition cables with M3 cable screw - RA15001040512X(15-0512)
        • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing Spark Plugs - RA15001191031X(15-1031)
        • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and Installing Ignition Coils - RA15001192001X(15-2001)
        • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and Installing EZL/AKR Control Unit - RA15001192093X(15-2093)
        • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and Installing Crankshaft Position Sensor - RA15001192133X(15-2133)
        • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and Installing Camshaft Position Sensor - RA15001192143X(15-2143)
        • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
          • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
        • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing Knock Sensors - RA15001192183X(15-2183)
          • Removing and Installing EZL/AKR Resistance Trimming Coupling - RA15001192153X(15-2153)
        • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and Installing Engine Systems Control Unit (MAS) - RA15001192193X(15-2193)
        • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and Installing High Voltage Distributor - RA15001193010X(15-3010)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA15001045TA00X
        • Replacing Ignition Cables with M3 Cable Screw - RA15001191476X(15-1476)
        • Technical Modifications Engine 119 Combustion KE Injection - RA1500119TA00X
        • Notes regarding working on breakerless ignition system - RA1500FLH0010X(15-0010)
        • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3A020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3B020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3C020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3D020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3E020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3F020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3I020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3K020X(15-0020)
        • Function of breakerless transistorized ignition system without series resistors with hybrid ignition control unit (TSZ) - RA1500KE20015X(15-0015)
        • Engine systems control unit (MAS) - RA1500KE30030X(15-0030)
        • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3B025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3C025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3D025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3E025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3F025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3G025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3H025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3I025X(15-0025)
          • RA1500KE3J025X
      • Component Modifications
        • High voltage distributor cap, high voltage distributor rotor - BT15.12-P-0001-01A
        • High voltage distributor rotor with stiffening ribs - BT15.12-P-0002-01A
    • Mixture Formation -- Component Modifications -- 129 Chassis
      • Component Modifications
        • LH-SFI fuel injection valves modified - BT07.03-P-0001-01A
        • O-ring at fuel injection valve modified - BT07.03-P-0002-02A
        • LH-SFI variable reference resistor modified - BT07.41-P-0001-01A
    • Mixture Formation -- General Information -- 129 Chassis
      • General Information
        • Notes on actuations - AH07.00-P-3000
          • References to test conditions for engine testing and adjusting work - AH07.00-P-3000-01A
          • Notes on actual value screens - AH07.00-P-3000-02WA
          • Notes on actuations - AH07.00-P-3000-03WA
        • Notes regarding test conditions when testing engine output and exhaust gas - AH07.00-P-3003-01A
        • Notes on engine tests - AH07.00-P-3004
          • Notes on compression test - AH07.00-P-3004-01WA
          • Notes on smooth engine running test - AH07.00-P-3004-02WA
          • Notes on ignition circuit shutoff test - AH07.00-P-3004-03WA
    • Mixture Formation -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model Designation, Installation Survey - RA07031190001X(07.3-0001)
          • Model and components survey - RA0703KE10001X(07.3-0001)
        • Location of components - RA07031040005X(07.3-0005)
          • Location of components - RA07031040005X(07.3-0005)
          • Location of Components - RA07031190005X(07.3-0005)
        • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and Installing Starting Valve - RA07031191606X(07.3-1606)
        • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Conducting Fuel Quantity Comparison Measurement - RA07031191609X(07.3-1609)
        • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Testing, Adjusting Zero Position of Air Flow Sensor Plate - RA07031191612X(07.3-1612)
        • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and Installing KE Resistance Trimming Plug - RA07031191652X(07.3-1652)
        • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing Seal for Control Plunger - RA07031191660X(07.3-1660)
        • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and Installing Air Flow Sensor Plate - RA07031191665X(07.3-1665)
        • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and Installing Mixture Control Unit - RA07031191668X(07.3-1668)
        • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and Installing Diaphragm Pressure Regulator - RA07031191669X(07.3-1669)
        • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and Installing Fuel Distributor - RA07031191674X(07.3-1674)
        • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and Installing Fuel Accumulator - RA07031191683X(07.3-1683)
        • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and Installing Air Flow Sensor - RA07031191686X(07.3-1686)
        • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and Installing Coolant Temperature Sensor - RA07031191687X(07.3-1687)
        • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and Installing Overvoltage Protection - RA07031191688X(07.3-1688)
        • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and Installing Throttle Valve Switch - RA07031191689X(07.3-1689)
        • Removing and installing microswitch - RA07031041690X(07.3-1690)
        • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and Installing Intake Air Temperature Sensor - RA07031191691X(07.3-1691)
        • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191698X(07.3-1692)
        • Replacing vehicle speed Hall-effect sensor - RA07031041693X(07.3-1693)
        • Removing and installing CIS-E control unit - RA07031041698X(07.3-1698)
        • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and Installing Idle Speed Adjuster - RA07031192118X(07.3-2118)
        • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing Oxygen Sensor - RA07031195303X(07.3-5303)
        • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and Installing Fuel Filter - RA07031195563X(07.3-5563)
        • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and Installing Fuel Pumps - RA07031195713X(07.3-5713)
        • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and Installing Fuel Pump Set - RA07031195770X(07.3-5770)
        • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing Check Valve for Fuel Pump - RA07031195820X(07.3-5820)
        • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and Installing Rubber Pads for Fuel Pump Set - RA07031195860X(07.3-5860)
        • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and Installing Throttle Valve Assembly - RA07031196210X(07.3-6210)
        • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing Injection Valves - RA07031196500X(07.3-6500)
        • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and Installing Injection Valves - RA07031196520X(07.3-6520)
        • Programmed Repairs Engine 104 Combustion CIS-E Injection - RA0703104PR00X
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA0703104TA00X
        • KE Function Diagram - RA07031190003X(07.3-0003)
        • Technical Modifications Engine 119 Injection Combustion KE - RA0703119TA00X
        • Vehicle features - RA0703KE10004X(07.3-0004)
        • Function diagram KE injection system - RA0703KE10010X(07.3-0010)
        • Location of components - RA0703KE10015X(07.3-0015)
        • Influencing parameters at KE control unit - RA0703KE10020X(07.3-0020)
        • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation (continuation) - RA0703KE2E030X(07.3-0030)
        • Fuel supply - RA0703KE1B030X(B.)
        • Mixture formation - RA0703KE1C030X(C.)
        • Functions in the KE control unit - RA0703KE1D030X(D.)
        • Start devices - RA0703KE2F030X(F.)
        • Idle speed devices - RA0703KE2G030X(G.)
        • Installation survey - RA07041040001X(07.4-0001)
        • Removing and installing diaphragm pressure regulator - RA07041041450X(07.4-1450)
        • Removing and installing fuel distributor with injection valves - RA07041041451X(07.4-1451)
        • Removing and installing protective grille at air mass sensor - RA07041041452X(07.4-1452)
        • Removing and installing hot wire air mass sensor - RA07041041453X(07.4-1453)
        • Removing and installing LH resistance trimming plug - RA07041041459X(07.4-1459)
        • Removing and installing coolant temperature sensor - RA07041041462X(07.4-1462)
        • Removing and installing intake air temperature sensor - RA07041041465X(07.4-1465)
        • Removing and installing LH control unit - RA07041041470X(07.4-1470)
        • Replacing oxygen sensor - RA07041045303X(07.4-5303)
        • Removing and installing fuel filter - RA07041045563X(07.4-5563)
        • Removing and installing fuel pumps - RA07041045750X(07.4-5750)
        • Removing and installing fuel pump pack - RA07041045770X(07.4-5770)
        • Replacing check valve for fuel pumps - RA07041045820X(07.4-5820)
        • Removing and installing rubber blocks for fuel pump pack - RA07041045860X(07.4-5860)
        • Removing and installing injection valves - RA07041046520X(07.4-6520)
        • Renewing isolating sleeves and rubber rings (for injection valves) - RA07041046572X(07.4-6572)
        • Programmed repairs - RA0704104PR00X
        • Technical modifications - RA0704104TA00X
        • Vehicle features - RA0704FLH0004X(07.4-0004)
        • Function diagram - RA0704FLH0010X(07.4-0010)
        • Location of components - RA0704FLH0015X(07.4-0015)
        • Influencing parameters at control unit - RA0704FLH0020X(07.4-0020)
        • Design and function - RA0704FLH0030X(07.4-0030)
        • Vehicle Features - RA0705HFM004X(07.5-0004)
        • Function Diagram - RA0705HFM0010X(07.5-0010)
        • Location of Components - RA0705HFM0015X(07.5-0015)
        • Influencing Parameters at the Control Unit - RA0705HFM0020X(07.5-0020)
        • HFM Design and Function - RA0705HFM0030X(07.5-0030)
        • HFM Ignition System Design and Function - RA0705HFM0035X(07.5-0035)
    • Mixture Formation -- Self-Diagnostic System -- 129 Chassis
      • Self-Diagnostic System
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000B
          • Notes
          • Hot-film mass air flow sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-04B
          • Fault code description - ME-SFI - hot film mass air flow sensor - AD07.61-P-4000-01B
          • Pressure sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-06A
          • Fault code description - ME-SFI - pressure sensor - AD07.61-P-4000-02A
          • Intake air temperature sensor - ME-SFI gasoline injection - Testing electrical system - AD07.61-P-6000-05A
          • Fault code description - ME-SFI - intake air temperature sensor - AD07.61-P-4000-03A
          • Coolant temperature sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-08A
          • Fault code description - ME-SFI - coolant temperature sensor - AD07.61-P-4000-04A
          • Throttle valve actuator signal - ME-SFI idle speed control/electronic accelerator - Testing electrics - AD07.61-P-6002-03A
          • ME-SFI actual value potentiometer in the throttle valve actuator, fault code description - AD07.61-P-4000-48A
          • Right O sensor signal upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-11A
          • Fault code description - ME-SFI - oxygen sensor signal - AD07.61-P-4000-06A
          • O2 Fault code description - ME-SFI - ageing of oxygen sensor upstream of TWC - AD07.61-P-4000-07A
          • Right O2 sensor heating in front of the TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-13A
          • Oxygen sensor heating, fault code description ME-SFI - AD07.61-P-4000-08A
          • Oxygen sensor signal on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-15A
          • Oxygen sensor heating on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-17A
          • Left O2 sensor signal opstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-10A
          • Left O2 sensor heating upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-12A
          • Oxygen sensor signal on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-14A
          • Oxygen sensor heating on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-16A
          • Self-adaption of mixture formation to limit, fault code description ME-SFI - AD07.61-P-4000-09A
          • Fuel injection (Y62/1) - ME-SFI gasoline injection system - Timing electrical system - AD07.61-P-6000-18A
          • Fault code description - ME-SFI - fuel injectors - AD07.61-P-4000-10B
          • Fuel injector (Y62/2) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-19B
          • Fuel injector (Y62/3) - ME-SFI gasoline injection system - AD07.61-P-6000-20B
          • Fuel injector (Y62/4) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-21B
          • Fuel injector (Y62/5) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-22B
          • Fuel injector (Y62/6) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-23B
          • Fuel injector (Y62/7) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-38A
          • Fuel injector (Y62/8) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-39A
          • Primary voltage (T1/1) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-11A
          • Primary voltage (T1/2) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-12B
          • Primary voltage (T1/3) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-13B
          • Primary voltage (T1/4) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-14B
          • Primary voltage (T1/5) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-15B
          • Primary voltage (T1/6) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-16B
          • Primary voltage (T1/7) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-20A
          • Primary voltage (T1/8) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-21A
          • Ignitin voltage - ME-SFI ignition system - testing electrics - AD07.61-P-6001-17B
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01A
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01B
          • Fault code description - ME-SFI - misfires - AD07.61-P-4000-11B
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BA
          • Notes
          • Fault code description - ME-SFI - knock sensor - AD07.61-P-4000-12A
          • Crankshaft position sensor Checking Electrical components for the ME-SFI ignition system - AD07.61-P-6001-09B
          • Fault code description - ME-SFI - crankshaft position sensor - AD07.61-P-4000-13A
          • Camshaft Hall sensor - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-10B
          • Fault code description - ME-SFI - camshaft Hall sensor - AD07.61-P-4000-14A
          • EGR transducer - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-27B
          • Exhaust gas recirculation malfunction, fault code description ME-SFI - AD07.61-P-4000-50B
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-24B
          • Air pump switchover valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-25A
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-26A
          • ME-SFI secondary air injection malfunction - Fault code description - AD07.61-P-4000-15A
          • Fault code description - three-way catalytic converter effect too low - AD07.61-P-4000-16B
          • Purge control valve vacuum control - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-30A
          • Purge system - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-31A
          • Regeneration system leaking ME-SFI fault code description - AD07.61-P-4000-17A
          • Purge control valve activation - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-29A
          • Fault code description - ME-SFI - purge control valve - AD07.61-P-4000-19A
          • Activated charcoal canister shutoff valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-32A
          • Tank pressusre sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-33A
          • Fault code description for activated charcoal canister shutoff valve, ME-SFI - AD07.61-P-4000-20A
          • Fault code description for tank pressure sensor, ME-SFI - AD07.61-P-4000-21A
          • Fault code description - ME-SFI - vehicle speed signal - AD07.61-P-4000-23A
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01C
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01D
          • Fault code description - ME-SFI - idle speed control - AD07.61-P-4000-24A
          • Fault code description for oil pressure sensor for cylinder cut-out-system, ME-SFI - AD07.61-P-4000-58B
          • ME-SFI gasoline injection system electrical system, check ME-SFI control module terminal 30 - AD07.61-P-6000-01B
          • ME-SFI control module, terminal 87 - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-02B
          • ME-SFI control module voltage supply - Fault code description - AD07.61-P-4000-59A
          • Cruise control push button Checking the electrical components of cruise control with an ME variable speed limiter - AD07.61-P-6003-01E
          • CAN data bus - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-34A
          • Fault code description - ME-SFI - CAN faulty - AD07.61-P-4000-26A
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BB
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000C
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000CA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000F
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000FB
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FC
    • Mixture Formation -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Engine test and setting operations - AR07.00-P-3000
          • Engine test and setting operations - AR07.00-P-3000WA
          • Engine test and setting operations - AR07.00-P-3000WB
          • Engine test and setting operations - AR07.00-P-3000WC
        • Check and adjust engine - AR07.00-P-3001
          • Check and adjust engine - AR07.00-P-3001WA
          • Check and adjust engine - AR07.00-P-3001WB
        • Test, regulate idle speed - AR07.00-P-3002
          • Test, regulate idle speed - AR07.00-P-3002WA
          • Test, regulate idle speed - AR07.00-P-3002WB
        • Test engine performance and exhaust emissions - AR07.00-P-3003
          • Test engine performance and exhaust emissions - AR07.00-P-3003WA
          • Test engine performance and exhaust emissions - AR07.00-P-3003WB
        • Extension to testing, adjusting engine - AR07.00-P-3004
          • Extension to testing, adjusting engine - AR07.00-P-3004WA
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WB
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WC
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9104AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9113AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9119AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9120AB
        • Removing and installing fuel rail with injection valves - AR07.03-P-1450D
        • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451
          • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451A
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451E
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451F
        • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452E
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452F
        • Remove/install injection valves (ME-SFI) - AR07.03-P-6520
          • Remove/install injection valves (ME-SFI) - AR07.03-P-6520A
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520E
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520F
        • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521E
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521F
        • Removing and installing injection valves - AR07.03-P-6522D
        • Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) - AR07.03-P-6570E
        • Removing and installing hot film mass air flow sensor - AR07.07-P-1453
          • Removing and installing hot film mass air sensor - AR07.07-P-1453D
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453E
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453F
        • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AA
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AG
        • Removing and installing diaphragm pressure regulator - AR07.17-P-1450D
        • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451E
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451F
        • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452
          • Removing and installing diaphragm pressure regulator (ME) - AR07.17-P-1452E
          • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452F
        • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453E
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453F
        • Removing and installing HFM/LH-SFI variable reference resistor - AR07.41-P-1459
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459E
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459F
          • Removing, installing HFM-SFI variable reference resistor - AR07.51-P-1459D
  • Mode 6
    • Introduction
    • Mode 6
  • Remove, Overhaul & Install
    • Engine Controls - Removal, Overhaul & Installation
      • Introduction
      • 2.3L (Engine 111)
      • 2.8L V6 (Engine 112)
      • 2.8L & 3.2L I6 (Engine 104)
      • 4.3L & 5.0L (Engine 113)
      • 4.2L & 5.0L (Engine 119)
      • 3.0L Diesel (Engine 606)
  • Specifications
    • Engine Controls - Service & Adjustment Specifications
      • Introduction
      • Capacities
      • Quick-Service
        • Service Intervals & Specifications
      • Mechanical Checks
        • Engine Compression
        • Valve Clearance
      • Ignition System
        • Ignition Coil
        • Spark Plugs
        • Firing Order
        • Ignition Timing
      • Fuel System
        • Gasoline
        • Diesel
        • Idle Speed & Mixture
        • Fast Idle Speed
    • Firing Order & Cylinder Identification
      • Firing Order & Cylinder Identification
        • Notes
        • 4 Cylinder Engine
        • 5 Cylinder Engine
        • 6 Cylinder Engine
        • V6 Engine
        • V8 Engine
        • V12 Engine
  • System
    • Data Link Connector - Terminal Identification
      • Data Link Connector (X11/4)
        • Terminal Identification
    • DTC Index
      • Anti-Lock/Traction Control
      • Electronic Power Steering
        • Without ESP, BAS & SPS
        • With ESP, BAS & SPS
        • With ABS, ASR, ETS & SPS
      • Keyless Entry Systems - SL500, SL600
      • Engine Performance DTCS
        • SL320
          • SL320 (1994-1996)
          • SL320 (1997)
        • SL500
          • SL500 (1996-1999)
          • SL500 (2001-2002)
          • DI ENGINE 119 (description only)
          • LH ENGINE 119 (description only)
        • SL600
          • SL600 (with test)
          • DI ENGINE 120 (description only)
          • LH ENGINE 120 (description only)
      • HVAC DTCS
        • SL500 (1998-1999)
        • SL500 (2000-2001)
        • SL320, SL500, SL600 (1990-2002)
      • Restraint DTCS
        • SL320, SL500 (1996)
        • SL320, SL500 (1997)
        • SL500 (1998)
        • SL500 (1999)
        • SL500, SL600 (2000)
        • SL500, SL600 (2001)
    • Engine Controls - Self-Diagnostics With Codes
      • Introduction
      • Model Identification
      • Self-Diagnostic System
        • Notes
        • Engine Control Module (ECM)
          • Mixture Self-Adaptation
          • Throttle Valve Actuator Recognition
          • Vehicle Speed Sensor (VSS) Adaption (Up To 1/98)
          • Vehicle Speed Sensor (VSS) Adaption (As Of 2/98)
          • Performance/Speedometer Test
        • Check Engine Light
        • Version Coding
          • Notes
          • Automatic Coding
          • Manual Coding
        • Drive Authorization System (DAS)
        • Service Precautions
        • Retrieving Codes
          • Notes
          • Using Hand Held Tester (HHT)
          • Using Generic Scan Tool
        • Clearing Codes
      • How To Read Diagnostic Information
      • Component/Circuit Identification
      • ECM Connector Identification
      • Diagnostic Trouble Code Identification
        • Notes
        • Symptom Diagnostics
        • Fuel Injection System Tests
          • Fuel Injection System Test (Steps 1.0-1.2)
          • Fuel Injection System Test (Steps 2.0-2.2)
          • Fuel Injection System Test (Steps 3.0-4.0)
          • Fuel Injection System Test (Steps 4.1-4.3)
          • Fuel Injection System Test (Steps 5.0 & 5.1)
          • Fuel Injection System Test (Step 6.0)
          • Fuel Injection System Test (Step 7.0)
          • Fuel Injection System Test (Steps 8.0 & 8.1)
          • Fuel Injection System Test (Steps 8.2-10.0)
          • Fuel Injection System Test (Steps 11.0-12.0)
          • Fuel Injection System Test (Steps 13.0 & 14.0)
          • Fuel Injection System Test (Steps 15.0 & 16.0)
          • Fuel Injection System Test (Steps 17.0 & 18.0)
          • Fuel Injection System Test (Step 19.0)
          • Fuel Injection System Test (Step 20.0)
          • Fuel Injection System Test (Step 21.0)
          • Fuel Injection System Test (Step 22.0)
          • Fuel Injection System Test (Step 23.0)
          • Fuel Injection System Test (Step 24.0)
          • Fuel Injection System Test (Step 25.0)
          • Fuel Injection System Test (Steps 26.0 & 27.0)
          • Fuel Injection System Test (Step 28.0)
          • Fuel Injection System Test (Step 29.0)
          • Fuel Injection System Test (Steps 30.0 & 31.0)
          • Fuel Injection System Test (Steps 32.0 & 33.0)
          • Fuel Injection System Test (Steps 34.0-35.1)
          • Fuel Injection System Test (Steps 36.0-36.2)
          • Fuel Injection System Test (Steps 37.0 & 31.1)
          • Fuel Injection System Test (Steps 38.0-40.0)
        • Ignition System Tests
          • Notes
          • Ignition System Test (Steps 1.0 & 1.1)
          • Ignition System Test (Steps 1.2-2.2)
          • Ignition System Test (Steps 3.0 & 4.0)
          • Ignition System Test (Steps 5.0 & 6.0)
          • Ignition System Test (Steps 7.0 & 8.0)
          • Ignition System Test (Steps 9.0 & 10.0)
          • Ignition System Test (Steps 11.0 & 11.1)
          • Ignition System Test (Steps 12.0 & 12.1)
          • Ignition System Test (Steps 13.0-14.0)
          • Ignition System Test (Steps 14.1-15.1)
          • Ignition System Test (Steps 16.0-17.0)
          • Ignition System Test (Steps 17.1-18.1)
          • Ignition System Test (Steps 19.0-19.1)
          • Ignition System Test (Steps 20.0-20.1)
          • Ignition System Test (Step 21.0)
        • Electronic Accelerator Tests
          • Electronic Accelerator Test (Steps 1.0-2.0)
          • Electronic Accelerator Test (Steps 3.0 & 3.1)
          • Electronic Accelerator Test (Steps 4.0 & 5.0)
        • DTC Description
        • Cylinder Shutoff Tests
          • Notes
          • DTC P0520 Test
          • DTC P1183 & P1184 Test
          • DTC P1355 & P1356 Test
          • DTC P1357, P1358, P1359, P1360 & P1361 Test
          • DTC P1366 Test
          • DTC P1380 Test
          • DTC P1666 Test
        • Cruise Control Tests
        • Fuel Injector Tests
        • Fuel Pump Tests
        • Signal Pattern Identification
    • Engine Controls - System & Component Testing - Gasoline - C36, C43, C220, C230, C280, Cl500, CLK320, CLK430, E55, E320, E430, Ml55, Ml320, Ml430, S320, S420, S430, S500, SL320, SL500, SLK230,
      • Introduction
      • Engine/Year Application
      • Engine Sensors & Switches
        • Crankshaft Position Sensor
        • Intake Air Temperature Sensor
        • Engine Coolant Temperature Sensor
      • Fuel System
      • Ignition System
  • Testing & Diagnosis
    • Data Link Connector - Terminal Identification
      • Data Link Connector (X11/4)
        • Terminal Identification
    • DTC Index
      • Anti-Lock/Traction Control
      • Electronic Power Steering
        • Without ESP, BAS & SPS
        • With ESP, BAS & SPS
        • With ABS, ASR, ETS & SPS
      • Keyless Entry Systems - SL500, SL600
      • Engine Performance DTCS
        • SL320
          • SL320 (1994-1996)
          • SL320 (1997)
        • SL500
          • SL500 (1996-1999)
          • SL500 (2001-2002)
          • DI ENGINE 119 (description only)
          • LH ENGINE 119 (description only)
        • SL600
          • SL600 (with test)
          • DI ENGINE 120 (description only)
          • LH ENGINE 120 (description only)
      • HVAC DTCS
        • SL500 (1998-1999)
        • SL500 (2000-2001)
        • SL320, SL500, SL600 (1990-2002)
      • Restraint DTCS
        • SL320, SL500 (1996)
        • SL320, SL500 (1997)
        • SL500 (1998)
        • SL500 (1999)
        • SL500, SL600 (2000)
        • SL500, SL600 (2001)
    • Engine Controls - Self-Diagnostics With Codes
      • Introduction
      • Model Identification
      • Self-Diagnostic System
        • Notes
        • Engine Control Module (ECM)
          • Mixture Self-Adaptation
          • Throttle Valve Actuator Recognition
          • Vehicle Speed Sensor (VSS) Adaption (Up To 1/98)
          • Vehicle Speed Sensor (VSS) Adaption (As Of 2/98)
          • Performance/Speedometer Test
        • Check Engine Light
        • Version Coding
          • Notes
          • Automatic Coding
          • Manual Coding
        • Drive Authorization System (DAS)
        • Service Precautions
        • Retrieving Codes
          • Notes
          • Using Hand Held Tester (HHT)
          • Using Generic Scan Tool
        • Clearing Codes
      • How To Read Diagnostic Information
      • Component/Circuit Identification
      • ECM Connector Identification
      • Diagnostic Trouble Code Identification
        • Notes
        • Symptom Diagnostics
        • Fuel Injection System Tests
          • Fuel Injection System Test (Steps 1.0-1.2)
          • Fuel Injection System Test (Steps 2.0-2.2)
          • Fuel Injection System Test (Steps 3.0-4.0)
          • Fuel Injection System Test (Steps 4.1-4.3)
          • Fuel Injection System Test (Steps 5.0 & 5.1)
          • Fuel Injection System Test (Step 6.0)
          • Fuel Injection System Test (Step 7.0)
          • Fuel Injection System Test (Steps 8.0 & 8.1)
          • Fuel Injection System Test (Steps 8.2-10.0)
          • Fuel Injection System Test (Steps 11.0-12.0)
          • Fuel Injection System Test (Steps 13.0 & 14.0)
          • Fuel Injection System Test (Steps 15.0 & 16.0)
          • Fuel Injection System Test (Steps 17.0 & 18.0)
          • Fuel Injection System Test (Step 19.0)
          • Fuel Injection System Test (Step 20.0)
          • Fuel Injection System Test (Step 21.0)
          • Fuel Injection System Test (Step 22.0)
          • Fuel Injection System Test (Step 23.0)
          • Fuel Injection System Test (Step 24.0)
          • Fuel Injection System Test (Step 25.0)
          • Fuel Injection System Test (Steps 26.0 & 27.0)
          • Fuel Injection System Test (Step 28.0)
          • Fuel Injection System Test (Step 29.0)
          • Fuel Injection System Test (Steps 30.0 & 31.0)
          • Fuel Injection System Test (Steps 32.0 & 33.0)
          • Fuel Injection System Test (Steps 34.0-35.1)
          • Fuel Injection System Test (Steps 36.0-36.2)
          • Fuel Injection System Test (Steps 37.0 & 31.1)
          • Fuel Injection System Test (Steps 38.0-40.0)
        • Ignition System Tests
          • Notes
          • Ignition System Test (Steps 1.0 & 1.1)
          • Ignition System Test (Steps 1.2-2.2)
          • Ignition System Test (Steps 3.0 & 4.0)
          • Ignition System Test (Steps 5.0 & 6.0)
          • Ignition System Test (Steps 7.0 & 8.0)
          • Ignition System Test (Steps 9.0 & 10.0)
          • Ignition System Test (Steps 11.0 & 11.1)
          • Ignition System Test (Steps 12.0 & 12.1)
          • Ignition System Test (Steps 13.0-14.0)
          • Ignition System Test (Steps 14.1-15.1)
          • Ignition System Test (Steps 16.0-17.0)
          • Ignition System Test (Steps 17.1-18.1)
          • Ignition System Test (Steps 19.0-19.1)
          • Ignition System Test (Steps 20.0-20.1)
          • Ignition System Test (Step 21.0)
        • Electronic Accelerator Tests
          • Electronic Accelerator Test (Steps 1.0-2.0)
          • Electronic Accelerator Test (Steps 3.0 & 3.1)
          • Electronic Accelerator Test (Steps 4.0 & 5.0)
        • DTC Description
        • Cylinder Shutoff Tests
          • Notes
          • DTC P0520 Test
          • DTC P1183 & P1184 Test
          • DTC P1355 & P1356 Test
          • DTC P1357, P1358, P1359, P1360 & P1361 Test
          • DTC P1366 Test
          • DTC P1380 Test
          • DTC P1666 Test
        • Cruise Control Tests
        • Fuel Injector Tests
        • Fuel Pump Tests
        • Signal Pattern Identification
    • Engine Controls - System & Component Testing - Gasoline - C36, C43, C220, C230, C280, Cl500, CLK320, CLK430, E55, E320, E430, Ml55, Ml320, Ml430, S320, S420, S430, S500, SL320, SL500, SLK230,
      • Introduction
      • Engine/Year Application
      • Engine Sensors & Switches
        • Crankshaft Position Sensor
        • Intake Air Temperature Sensor
        • Engine Coolant Temperature Sensor
      • Fuel System
      • Ignition System
  • Theory and Operation
    • Engine Controls - Theory & Operation - Gasoline
      • Introduction
      • System Application
      • Air Induction System
        • Supercharger (2.3L Engine)
        • Resonance Intake Manifold
          • Notes
          • 3.2L Inline 6-Cylinder Engine
          • 2.8L V6, 3.2L V6, 4.3L V8 & 5.0L V8 (Engine 113.9) Engines
      • Computerized Engine Controls (Me-SFI System)
        • Notes
        • Input Devices
          • Engine Coolant Temperature (ECT) Sensor
          • Fuel Tank Pressure Sensor
          • Hot-Film Mass Airflow Sensor
          • Intake Manifold Pressure Sensor
          • Knock Sensor
          • Oil Level Switch
          • Pedal Value Sensor
          • Purge Monitoring Pressure Sensor
        • Output Devices
          • Activated Charcoal Canister Shut-Off Valve
          • AIR Pump Switchover Valve
          • Electronic Accelerator/Cruise Control/Idle Speed Control (EA/CC/ISC) Actuator
          • Purge Control Valve
      • Fuel System
        • Fuel Control (Me-SFI)
          • Maximum Engine Speed Limitation
          • Maximum Vehicle Speed Limitation
          • Safety Fuel Shutoff Function
      • Ignition System
        • Ignition Timing Control (Me-SFI)
          • 3.2L 6-Cylinder (Eng. 104), 4.2L V8 & 5.0L V8 (Eng. 119)
          • 2.8L V6, 3.2L V6, 4.3L V8 & 5.0L V8 (Eng. 113)
      • Emission Systems
        • Me-SFI System
          • Catalyst Warm-Up
          • Onboard Refueling Vapor Recovery (ORVR)
          • Secondary Air Injection (2.3L Supercharged)
      • Self-Diagnostic System
        • Me-SFI System
          • Malfunction Indicator Light (MIL)
      • Miscellaneous Controls
        • Me-SFI System
          • Transmission Overload Protection
  • Tune-Up
    • Electrical System - Engine -- 129 Chassis
      • General Information
        • Notes on avoiding damage to ignition system - AH15.10-P-0002
          • Notes on avoiding damage to ignition system - AH15.10-P-0002-01D
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01E
          • Notes on avoiding damage to the ignition system - AH15.10-P-0002-01F
        • General notes on contactless high voltage distribution - AH15.10-P-1002
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WA
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WD
          • General notes on contactless high voltage distribution - AH15.10-P-1002-01WE
        • General notes on testing contactless high voltage distribution - AH15.10-P-1003-01W
      • Safety Precautions
        • Risk of death caused by contact with parts conducting high voltages. - AS15.10-Z-0001-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9104AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9113AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9119AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9120AB
        • Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9129AA
        • Remove, install camshaft Hall sensor - AR15.10-P-2000A
        • Test rotorless high voltage distribution - AR15.10-P-3000
          • Test rotorless high voltage distribution - AR15.10-P-3000WA
          • Test rotorless high voltage distribution - AR15.10-P-3000WD
          • Test rotorless high voltage distribution - AR15.10-P-3000WE
        • Replacing ignition cables with M3 cable screw - AR15.12-P-0512G
        • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928E
          • Removing and installing high voltage distributor cap, high voltage distributor rotor - AR15.12-P-1928F
        • Removing and installing ignition coils - AR15.12-P-2003
          • Remove/install ignition coils - AR15.12-P-2003A
          • Removing and installing ignition coils - AR15.12-P-2003E
          • Removing and installing ignition coils - AR15.12-P-2003EA
          • Removing and installing ignition coils - AR15.12-P-2003F
          • Removing and installing ignition coils - AR15.12-P-2003FA
          • Remove/install ignition coils - AR15.12-P-2003G
        • Removing and installing crankshaft position sensor - AR15.12-P-2133
          • Remove/install crankshaft position sensor - AR15.12-P-2133A
          • Removing and installing crankshaft position sensor - AR15.12-P-2133E
          • Removing and installing crankshaft position sensor - AR15.12-P-2133EA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133F
          • Removing and installing crankshaft position sensor - AR15.12-P-2133FA
          • Removing and installing crankshaft position sensor - AR15.12-P-2133G
        • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143
          • Removing and installing, adjusting camshaft position sensor - AR15.12-P-2143E
            • Notes
            • Checking, adjusting clearance of camshaft position sensor/camshaft sprocket segment - AR15.12-P-2143-01A
          • Removing and installing, adjustable camshaft position sensor - AR15.12-P-2143G
        • Replacing knock sensor - AR15.12-P-2183G
        • Remove/install knock sensors - AR15.12-P-2184
          • Remove/install knock sensors - AR15.12-P-2184A
          • Remove/install knock sensors - AR15.12-P-2184E
          • Remove/install knock sensors - AR15.12-P-2184EA
          • Remove/install knock sensors - AR15.12-P-2184F
        • Servicing wiring harness - AR15.18-P-0500A
        • Removing and installing starter - AR15.30-P-7100
          • Removing and installing starter - AR15.30-P-7100C
          • Remove starter, install - AR15.30-P-7100CS
          • Removing and installing starter - AR15.30-P-7100EC
        • Prerequisites for testing alternator - AR15.40-P-5009C
        • Checking regulation voltage of alternator - AR15.40-P-5010C
        • Testing alternator charging current - AR15.40-P-5011C
        • Removing and installing generator - AR15.40-P-5032
          • Removing and installing generator - AR15.40-P-5032CA
          • Removing and installing generator - AR15.40-P-5032CS
          • Remove and install generator - AR15.40-P-5032CT
        • Remove/install generator pulleys - AR15.40-P-5710
          • Removing and installing the generator poly-V-pulley - AR15.40-P-5710CS
          • Remove/install generator belt pulley - AR15.40-P-5710GF
        • Removing and installing regulator of generator - AR15.40-P-5760CS
        • Test diodes of generator - AR15.40-P-9301-02EA
      • Maintenance
        • Replace spark plugs - AP15.10-P-1580
          • Replace spark plugs - AP15.10-P-1580AC
          • Replace spark plugs - AP15.10-P-1580CA
      • Retrofitting & Conversion
        • Retrofitting smaller poly V-belt pulley and aluminum fan wheel - AN15.40-P-5700CS
      • Repair & Adjustments
        • Replacing ignition cables with M3 cable screw - RA15001040512X(15-0512)
        • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing spark plugs - RA15001041031X(15-1031)
          • Replacing Spark Plugs - RA15001191031X(15-1031)
        • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and installing ignition coil - RA15001042001X(15-2001)
          • Removing and Installing Ignition Coils - RA15001192001X(15-2001)
        • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and installing EZL/AKR control unit - RA15001042093X(15-2093)
          • Removing and Installing EZL/AKR Control Unit - RA15001192093X(15-2093)
        • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and installing crankshaft position sensor - RA15001042133X(15-2133)
          • Removing and Installing Crankshaft Position Sensor - RA15001192133X(15-2133)
        • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and installing camshaft position sensor - RA15001042143X(15-2143)
          • Removing and Installing Camshaft Position Sensor - RA15001192143X(15-2143)
        • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
          • Removing and installing EZL/AKR trimming plug connector - RA15001042153X(15-2153)
        • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing knock sensors - RA15001042183X(15-2183)
          • Replacing Knock Sensors - RA15001192183X(15-2183)
          • Removing and Installing EZL/AKR Resistance Trimming Coupling - RA15001192153X(15-2153)
        • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and installing engine systems control unit (MAS) - RA15001042193X(15-2193)
          • Removing and Installing Engine Systems Control Unit (MAS) - RA15001192193X(15-2193)
        • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and installing high voltage distributor - RA15001043010X(15-3010)
          • Removing and Installing High Voltage Distributor - RA15001193010X(15-3010)
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA15001045TA00X
        • Replacing Ignition Cables with M3 Cable Screw - RA15001191476X(15-1476)
        • Technical Modifications Engine 119 Combustion KE Injection - RA1500119TA00X
        • Notes regarding working on breakerless ignition system - RA1500FLH0010X(15-0010)
        • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) - RA1500FLH0020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3A020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3B020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3C020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3D020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3E020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3F020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3I020X(15-0020)
          • Electronic ignition system with variable characteristics EZL - RA1500KE3K020X(15-0020)
        • Function of breakerless transistorized ignition system without series resistors with hybrid ignition control unit (TSZ) - RA1500KE20015X(15-0015)
        • Engine systems control unit (MAS) - RA1500KE30030X(15-0030)
        • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3A025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3B025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3C025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3D025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3E025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3F025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3G025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3H025X(15-0025)
          • Electronic ignition system with variable characteristics and anti-knock control (EZL/AKR) - RA1500KE3I025X(15-0025)
          • RA1500KE3J025X
      • Component Modifications
        • High voltage distributor cap, high voltage distributor rotor - BT15.12-P-0001-01A
        • High voltage distributor rotor with stiffening ribs - BT15.12-P-0002-01A
    • Mixture Formation -- Component Modifications -- 129 Chassis
      • Component Modifications
        • LH-SFI fuel injection valves modified - BT07.03-P-0001-01A
        • O-ring at fuel injection valve modified - BT07.03-P-0002-02A
        • LH-SFI variable reference resistor modified - BT07.41-P-0001-01A
    • Mixture Formation -- General Information -- 129 Chassis
      • General Information
        • Notes on actuations - AH07.00-P-3000
          • References to test conditions for engine testing and adjusting work - AH07.00-P-3000-01A
          • Notes on actual value screens - AH07.00-P-3000-02WA
          • Notes on actuations - AH07.00-P-3000-03WA
        • Notes regarding test conditions when testing engine output and exhaust gas - AH07.00-P-3003-01A
        • Notes on engine tests - AH07.00-P-3004
          • Notes on compression test - AH07.00-P-3004-01WA
          • Notes on smooth engine running test - AH07.00-P-3004-02WA
          • Notes on ignition circuit shutoff test - AH07.00-P-3004-03WA
    • Mixture Formation -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model designation, installation survey - RA07031040001X(07.3-0001)
          • Model Designation, Installation Survey - RA07031190001X(07.3-0001)
          • Model and components survey - RA0703KE10001X(07.3-0001)
        • Location of components - RA07031040005X(07.3-0005)
          • Location of components - RA07031040005X(07.3-0005)
          • Location of Components - RA07031190005X(07.3-0005)
        • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and installing starting valve - RA07031041606X(07.3-1606)
          • Removing and Installing Starting Valve - RA07031191606X(07.3-1606)
        • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Performing fuel quantity comparison measurement - RA07031041609X(07.3-1609)
          • Conducting Fuel Quantity Comparison Measurement - RA07031191609X(07.3-1609)
        • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Checking, adjusting zero position of air flow sensor plate - RA07031041612X(07.3-1612)
          • Testing, Adjusting Zero Position of Air Flow Sensor Plate - RA07031191612X(07.3-1612)
        • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and installing CIS-E resistance trimming plug - RA07031041652X(07.3-1652)
          • Removing and Installing KE Resistance Trimming Plug - RA07031191652X(07.3-1652)
        • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing seal for control plunger - RA07031041660X(07.3-1660)
          • Replacing Seal for Control Plunger - RA07031191660X(07.3-1660)
        • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and installing air flow sensor plate - RA07031041665X(07.3-1665)
          • Removing and Installing Air Flow Sensor Plate - RA07031191665X(07.3-1665)
        • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and installing mixture control unit - RA07031041668X(07.3-1668)
          • Removing and Installing Mixture Control Unit - RA07031191668X(07.3-1668)
        • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and installing diaphragm pressure regulator - RA07031041669X(07.3-1669)
          • Removing and Installing Diaphragm Pressure Regulator - RA07031191669X(07.3-1669)
        • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and installing fuel distributor - RA07031041674X(07.3-1674)
          • Removing and Installing Fuel Distributor - RA07031191674X(07.3-1674)
        • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and installing fuel accumulator - RA07031041683X(07.3-1683)
          • Removing and Installing Fuel Accumulator - RA07031191683X(07.3-1683)
        • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and installing air flow sensor - RA07031041686X(07.3-1686)
          • Removing and Installing Air Flow Sensor - RA07031191686X(07.3-1686)
        • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and installing coolant temperature sensor - RA07031041687X(07.3-1687)
          • Removing and Installing Coolant Temperature Sensor - RA07031191687X(07.3-1687)
        • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and installing overvoltage protection - RA07031041688X(07.3-1688)
          • Removing and Installing Overvoltage Protection - RA07031191688X(07.3-1688)
        • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and installing throttle valve switch - RA07031041689X(07.3-1689)
          • Removing and Installing Throttle Valve Switch - RA07031191689X(07.3-1689)
        • Removing and installing microswitch - RA07031041690X(07.3-1690)
        • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and installing intake air temperature sensor - RA07031041691X(07.3-1691)
          • Removing and Installing Intake Air Temperature Sensor - RA07031191691X(07.3-1691)
        • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing electrohydraulic actuator - RA07031041692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191692X(07.3-1692)
          • Replacing Electrohydraulic Actuator - RA07031191698X(07.3-1692)
        • Replacing vehicle speed Hall-effect sensor - RA07031041693X(07.3-1693)
        • Removing and installing CIS-E control unit - RA07031041698X(07.3-1698)
        • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and installing idle speed motor - RA07031042118X(07.3-2118)
          • Removing and Installing Idle Speed Adjuster - RA07031192118X(07.3-2118)
        • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing oxygen sensor - RA07031045303X(07.3-5303)
          • Replacing Oxygen Sensor - RA07031195303X(07.3-5303)
        • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and installing fuel filter - RA07031045563X(07.3-5563)
          • Removing and Installing Fuel Filter - RA07031195563X(07.3-5563)
        • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and installing fuel pumps - RA07031045713X(07.3-5713)
          • Removing and Installing Fuel Pumps - RA07031195713X(07.3-5713)
        • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and installing fuel pump set - RA07031045770X(07.3-5770)
          • Removing and Installing Fuel Pump Set - RA07031195770X(07.3-5770)
        • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing check valve for fuel pump - RA07031045820X(07.3-5820)
          • Replacing Check Valve for Fuel Pump - RA07031195820X(07.3-5820)
        • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and installing rubber pads for fuel pump set - RA07031045860X(07.3-5860)
          • Removing and Installing Rubber Pads for Fuel Pump Set - RA07031195860X(07.3-5860)
        • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and installing throttle valve housing - RA07031046210X(07.3-6210)
          • Removing and Installing Throttle Valve Assembly - RA07031196210X(07.3-6210)
        • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing injection valves - RA07031046500X(07.3-6500)
          • Testing Injection Valves - RA07031196500X(07.3-6500)
        • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and installing injection valves - RA07031046520X(07.3-6520)
          • Removing and Installing Injection Valves - RA07031196520X(07.3-6520)
        • Programmed Repairs Engine 104 Combustion CIS-E Injection - RA0703104PR00X
        • Technical Modifications Engine 104 Combustion CIS-E Injection - RA0703104TA00X
        • KE Function Diagram - RA07031190003X(07.3-0003)
        • Technical Modifications Engine 119 Injection Combustion KE - RA0703119TA00X
        • Vehicle features - RA0703KE10004X(07.3-0004)
        • Function diagram KE injection system - RA0703KE10010X(07.3-0010)
        • Location of components - RA0703KE10015X(07.3-0015)
        • Influencing parameters at KE control unit - RA0703KE10020X(07.3-0020)
        • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation - RA0703KE1A030X(07.3-0030)
          • Design and operation (continuation) - RA0703KE2E030X(07.3-0030)
        • Fuel supply - RA0703KE1B030X(B.)
        • Mixture formation - RA0703KE1C030X(C.)
        • Functions in the KE control unit - RA0703KE1D030X(D.)
        • Start devices - RA0703KE2F030X(F.)
        • Idle speed devices - RA0703KE2G030X(G.)
        • Installation survey - RA07041040001X(07.4-0001)
        • Removing and installing diaphragm pressure regulator - RA07041041450X(07.4-1450)
        • Removing and installing fuel distributor with injection valves - RA07041041451X(07.4-1451)
        • Removing and installing protective grille at air mass sensor - RA07041041452X(07.4-1452)
        • Removing and installing hot wire air mass sensor - RA07041041453X(07.4-1453)
        • Removing and installing LH resistance trimming plug - RA07041041459X(07.4-1459)
        • Removing and installing coolant temperature sensor - RA07041041462X(07.4-1462)
        • Removing and installing intake air temperature sensor - RA07041041465X(07.4-1465)
        • Removing and installing LH control unit - RA07041041470X(07.4-1470)
        • Replacing oxygen sensor - RA07041045303X(07.4-5303)
        • Removing and installing fuel filter - RA07041045563X(07.4-5563)
        • Removing and installing fuel pumps - RA07041045750X(07.4-5750)
        • Removing and installing fuel pump pack - RA07041045770X(07.4-5770)
        • Replacing check valve for fuel pumps - RA07041045820X(07.4-5820)
        • Removing and installing rubber blocks for fuel pump pack - RA07041045860X(07.4-5860)
        • Removing and installing injection valves - RA07041046520X(07.4-6520)
        • Renewing isolating sleeves and rubber rings (for injection valves) - RA07041046572X(07.4-6572)
        • Programmed repairs - RA0704104PR00X
        • Technical modifications - RA0704104TA00X
        • Vehicle features - RA0704FLH0004X(07.4-0004)
        • Function diagram - RA0704FLH0010X(07.4-0010)
        • Location of components - RA0704FLH0015X(07.4-0015)
        • Influencing parameters at control unit - RA0704FLH0020X(07.4-0020)
        • Design and function - RA0704FLH0030X(07.4-0030)
        • Vehicle Features - RA0705HFM004X(07.5-0004)
        • Function Diagram - RA0705HFM0010X(07.5-0010)
        • Location of Components - RA0705HFM0015X(07.5-0015)
        • Influencing Parameters at the Control Unit - RA0705HFM0020X(07.5-0020)
        • HFM Design and Function - RA0705HFM0030X(07.5-0030)
        • HFM Ignition System Design and Function - RA0705HFM0035X(07.5-0035)
    • Mixture Formation -- Self-Diagnostic System -- 129 Chassis
      • Self-Diagnostic System
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000B
          • Notes
          • Hot-film mass air flow sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-04B
          • Fault code description - ME-SFI - hot film mass air flow sensor - AD07.61-P-4000-01B
          • Pressure sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-06A
          • Fault code description - ME-SFI - pressure sensor - AD07.61-P-4000-02A
          • Intake air temperature sensor - ME-SFI gasoline injection - Testing electrical system - AD07.61-P-6000-05A
          • Fault code description - ME-SFI - intake air temperature sensor - AD07.61-P-4000-03A
          • Coolant temperature sensor - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-08A
          • Fault code description - ME-SFI - coolant temperature sensor - AD07.61-P-4000-04A
          • Throttle valve actuator signal - ME-SFI idle speed control/electronic accelerator - Testing electrics - AD07.61-P-6002-03A
          • ME-SFI actual value potentiometer in the throttle valve actuator, fault code description - AD07.61-P-4000-48A
          • Right O sensor signal upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-11A
          • Fault code description - ME-SFI - oxygen sensor signal - AD07.61-P-4000-06A
          • O2 Fault code description - ME-SFI - ageing of oxygen sensor upstream of TWC - AD07.61-P-4000-07A
          • Right O2 sensor heating in front of the TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-13A
          • Oxygen sensor heating, fault code description ME-SFI - AD07.61-P-4000-08A
          • Oxygen sensor signal on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-15A
          • Oxygen sensor heating on right downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-17A
          • Left O2 sensor signal opstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-10A
          • Left O2 sensor heating upstream TWC - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-12A
          • Oxygen sensor signal on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-14A
          • Oxygen sensor heating on left downstream of TWC - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-16A
          • Self-adaption of mixture formation to limit, fault code description ME-SFI - AD07.61-P-4000-09A
          • Fuel injection (Y62/1) - ME-SFI gasoline injection system - Timing electrical system - AD07.61-P-6000-18A
          • Fault code description - ME-SFI - fuel injectors - AD07.61-P-4000-10B
          • Fuel injector (Y62/2) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-19B
          • Fuel injector (Y62/3) - ME-SFI gasoline injection system - AD07.61-P-6000-20B
          • Fuel injector (Y62/4) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-21B
          • Fuel injector (Y62/5) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-22B
          • Fuel injector (Y62/6) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-23B
          • Fuel injector (Y62/7) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-38A
          • Fuel injector (Y62/8) - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-39A
          • Primary voltage (T1/1) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-11A
          • Primary voltage (T1/2) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-12B
          • Primary voltage (T1/3) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-13B
          • Primary voltage (T1/4) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-14B
          • Primary voltage (T1/5) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-15B
          • Primary voltage (T1/6) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-16B
          • Primary voltage (T1/7) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-20A
          • Primary voltage (T1/8) - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-21A
          • Ignitin voltage - ME-SFI ignition system - testing electrics - AD07.61-P-6001-17B
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01A
          • Fuel injectors - Testing hydraulic system, ME-SFI fuel injectors - AD07.61-P-7002-01B
          • Fault code description - ME-SFI - misfires - AD07.61-P-4000-11B
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BA
          • Notes
          • Fault code description - ME-SFI - knock sensor - AD07.61-P-4000-12A
          • Crankshaft position sensor Checking Electrical components for the ME-SFI ignition system - AD07.61-P-6001-09B
          • Fault code description - ME-SFI - crankshaft position sensor - AD07.61-P-4000-13A
          • Camshaft Hall sensor - ME-SFI ignition system - Testing electrics - AD07.61-P-6001-10B
          • Fault code description - ME-SFI - camshaft Hall sensor - AD07.61-P-4000-14A
          • EGR transducer - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-27B
          • Exhaust gas recirculation malfunction, fault code description ME-SFI - AD07.61-P-4000-50B
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-24B
          • Air pump switchover valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-25A
          • Secondary air injection relay, testing of electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-26A
          • ME-SFI secondary air injection malfunction - Fault code description - AD07.61-P-4000-15A
          • Fault code description - three-way catalytic converter effect too low - AD07.61-P-4000-16B
          • Purge control valve vacuum control - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-30A
          • Purge system - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-31A
          • Regeneration system leaking ME-SFI fault code description - AD07.61-P-4000-17A
          • Purge control valve activation - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-29A
          • Fault code description - ME-SFI - purge control valve - AD07.61-P-4000-19A
          • Activated charcoal canister shutoff valve - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-32A
          • Tank pressusre sensor - Testing electrical system, ME-SFI gasoline injection system - AD07.61-P-6000-33A
          • Fault code description for activated charcoal canister shutoff valve, ME-SFI - AD07.61-P-4000-20A
          • Fault code description for tank pressure sensor, ME-SFI - AD07.61-P-4000-21A
          • Fault code description - ME-SFI - vehicle speed signal - AD07.61-P-4000-23A
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01C
          • Pedal value sensor signal, testing of electrical system, ME-SFI idle speed control/electronic accelerator - AD07.61-P-6002-01D
          • Fault code description - ME-SFI - idle speed control - AD07.61-P-4000-24A
          • Fault code description for oil pressure sensor for cylinder cut-out-system, ME-SFI - AD07.61-P-4000-58B
          • ME-SFI gasoline injection system electrical system, check ME-SFI control module terminal 30 - AD07.61-P-6000-01B
          • ME-SFI control module, terminal 87 - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-02B
          • ME-SFI control module voltage supply - Fault code description - AD07.61-P-4000-59A
          • Cruise control push button Checking the electrical components of cruise control with an ME variable speed limiter - AD07.61-P-6003-01E
          • CAN data bus - ME-SFI gasoline injection system - Testing electrical system - AD07.61-P-6000-34A
          • Fault code description - ME-SFI - CAN faulty - AD07.61-P-4000-26A
        • Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000BB
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000C
        • ME-SFI fuel injection and ignition system, diagnostics, DTC memory - AD07.61-P-4000CA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000F
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FA
        • ME-SFI gasoline injection and ignition system - Diagnostic fault code memory diagnosis - AD07.61-P-4000FB
        • ME-SFI gasoline injection and ignition system Diagnostic fault code memory diagnosis - AD07.61-P-4000FC
    • Mixture Formation -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Engine test and setting operations - AR07.00-P-3000
          • Engine test and setting operations - AR07.00-P-3000WA
          • Engine test and setting operations - AR07.00-P-3000WB
          • Engine test and setting operations - AR07.00-P-3000WC
        • Check and adjust engine - AR07.00-P-3001
          • Check and adjust engine - AR07.00-P-3001WA
          • Check and adjust engine - AR07.00-P-3001WB
        • Test, regulate idle speed - AR07.00-P-3002
          • Test, regulate idle speed - AR07.00-P-3002WA
          • Test, regulate idle speed - AR07.00-P-3002WB
        • Test engine performance and exhaust emissions - AR07.00-P-3003
          • Test engine performance and exhaust emissions - AR07.00-P-3003WA
          • Test engine performance and exhaust emissions - AR07.00-P-3003WB
        • Extension to testing, adjusting engine - AR07.00-P-3004
          • Extension to testing, adjusting engine - AR07.00-P-3004WA
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WB
          • Enlargement to testing, adjusting engine - AR07.00-P-3004WC
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9104AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9113AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9119AB
        • Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9120AB
        • Removing and installing fuel rail with injection valves - AR07.03-P-1450D
        • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451
          • Remove/install fuel rail with injectors (ME-SFI) - AR07.03-P-1451A
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451E
          • Removing and installing fuel rail with injectors (ME-SFI) - AR07.03-P-1451F
        • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452E
          • Removing and installing fuel rail with injection valves (LH-SFI) - AR07.03-P-1452F
        • Remove/install injection valves (ME-SFI) - AR07.03-P-6520
          • Remove/install injection valves (ME-SFI) - AR07.03-P-6520A
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520E
          • Removing and installing injectors (ME-SFI) - AR07.03-P-6520F
        • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521E
          • Removing and installing injection valves (LH-SFI) - AR07.03-P-6521F
        • Removing and installing injection valves - AR07.03-P-6522D
        • Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) - AR07.03-P-6570E
        • Removing and installing hot film mass air flow sensor - AR07.07-P-1453
          • Removing and installing hot film mass air sensor - AR07.07-P-1453D
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453E
          • Removing and installing hot film mass air flow sensor - AR07.07-P-1453F
        • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AA
          • Remove/install hot film mass air flow sensor together with air intake pipe - AR07.07-P-1454AG
        • Removing and installing diaphragm pressure regulator - AR07.17-P-1450D
        • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451E
          • Removing and installing diaphragm pressure regulator (LH-SFI) - AR07.17-P-1451F
        • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452
          • Removing and installing diaphragm pressure regulator (ME) - AR07.17-P-1452E
          • Removing and installing diaphragm pressure regulator (ME-SFI) - AR07.17-P-1452F
        • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453E
          • Removing and installing hot wire mass air flow sensor - AR07.41-P-1453F
        • Removing and installing HFM/LH-SFI variable reference resistor - AR07.41-P-1459
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459E
          • Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459F
          • Removing, installing HFM-SFI variable reference resistor - AR07.51-P-1459D
  • Vacuum Diagrams
    • Introduction
• General Information
  • Abbreviations
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
  • Basic Trouble Shooting
    • Basic Trouble Shooting - General Information
      • * Please Read This First *
      • Accessories & Electrical
        • Charging System Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
      • Air Conditioning & Heat
        • Air Conditioning Trouble Shooting
        • Heater System Trouble Shooting
      • Brakes
        • Brake System Trouble Shooting
      • Engine Mechanical
        • Cooling System Trouble Shooting
        • Gasoline Engine - Mechanical Trouble Shooting
      • Engine Performance
        • Carburetor Trouble Shooting:
        • Diesel Engine Trouble Shooting
        • Fuel Injection Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
        • Tune-Up Trouble Shooting - Gas Engine Vehicles
        • Vacuum Pump - Diesel Trouble Shooting
      • Manual Transmission
        • Manual Transmission Trouble Shooting
      • Powertrain
        • Clutch Trouble Shooting
        • Drive Axle - Noise Diagnosis
          • Unrelated Noises
          • Non-Drive Axle Noises
          • Gear Noise
          • Chuckle
          • Knock
          • Clunk
          • Bearing Whine
          • Bearing Rumble
          • Chatter On Turns
          • Axle Shaft Noise
          • Vibration
        • Drive Axle - RWD Trouble Shooting
        • Fwd Axle Shafts & CV Joints Trouble Shooting
      • Steering & Suspension
        • Manual Steering Gear Trouble Shooting
        • Power Steering Trouble Shooting
        • Steering Column Trouble Shooting
        • Suspension Trouble Shooting
        • Wheel Alignment Trouble Shooting
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Engine Performance - Trouble Shooting - General Information
      • * Please Read This First *
      • Engine Performance
  • Brakes
    • Anti-Lock Brake Safety Precautions - General Information
      • * Please Read This First *
      • Anti-Lock Brake Safety Precautions
    • Map - Brake Systems
      • Brake Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accelerometers
        • Accumulators
        • Anchor Pins
        • Anti-Lock Brake Control Assembly(Module)
        • Anti-Lock Brake Controller
        • Anti-Lock Brake Systems
        • Axle Seal
        • Backing Plates
        • Bleeder Screw
        • Brake Abs Active Light (Blue)
        • Brake Fluid
        • Brake Friction Material
        • Brake On - Off Switch
        • Brake Pads
        • Brake Pedals
        • Brake Shoe Hardware
        • Brake Shoes
        • Brake Stoplight Switches
        • Brake Warning Light (Amber)
        • Brake Warning Light (Red)
        • Bulb Sockets
        • Bulbs And LEDS
        • Caliper Hardware
        • Caliper Mounting Pin
        • Caliper Piston
        • Caliper Shim
        • Caliper Slider Pin (Bolt) Dust Boot
        • Caliper Slider Pin (Bolt)
        • Calipers
        • Combination Valve
        • Controllers
        • Digital Ratio Axle Controllers And Buffers (Drab And Dram)
        • Disable Switches
        • Drums
        • Electrical Brake Pumps
        • Electrical Park Motor
        • Electrical Pumps And Motors
        • Electro-Magnetic Interference
        • Electronic Brake Control Modulator
        • Electronic Brake Distribution
        • Electronic Brake Traction Control Module
        • Electronic Controllers
        • Electronic Traction Control
        • External Brake Cable
        • Flow Control Valve
        • Fluid Level Sensor Switches
        • Fluid
        • Four Wheel Drive Switches
        • Friction Material
        • G Sensors
        • Gaskets
        • Gravitational Switches
        • Grease Seal
        • Height Sensing Proportioning Valve
        • High Pressure Accumulator
        • Hoses
        • Hub
        • Hydraulic Control Unit
        • Hydraulic Modulators
        • Hydro-Boosters
        • Hydro-Electric Boosters (POWERMASTER)
        • Ignition Disable Switches
        • Lamp Driver Relay
        • Lateral Acceleration Switches
        • LEDS
        • Lenses
        • Low Pressure Accumulator
        • Lug Nut
        • Master Cylinder Cover Gasket
        • Master Cylinders
        • Modulators
        • Motor Pack
        • Motors
        • Pads
        • Parking Brake Cable
        • Parking Brake Mechanism
        • Parking Brake Shoes
        • Parking Brake Switches
        • Parking Brake Systems
        • Pedal Travel Switches
        • Pedals
        • Power Distribution Center
        • POWERMASTER
        • Pressure Differential Switches
        • Pressure Switches
        • Pressure Transducers
        • Proportioning Valve
        • Pumps
        • Relays
        • RELUCTOR (Speed) Ring
        • Rotors
        • Self-Adjusting Systems
        • Shoe Hardware
        • Shoes
        • Sockets
        • Speed Sensor (RELUCTOR) Ring
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Star Wheel
        • Steel Brake Lines
        • Stoplight Switches
        • Stroke Sensor
        • Switches
        • Tires
        • Tone Ring
        • Toothed Rings (Tone Wheel)
        • Traction Control System (TCS)
        • Transfer Tubes
        • Vacuum Boosters
        • Vacuum Hoses
        • Valves
        • Wear Indicator
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheel Cylinders
        • Wiring Harnesses
        • Yaw Rate Sensor
      • Brake System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Map - Routine Inspection Reference Guide
      • Routine Inspection Reference Guide
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Maintenance Overview
          • Antifreeze/Coolant
          • Visual Inspection
          • Radiator Cap Test
          • Engine Fan
          • Cooling System Power Flush And Refill
          • Belts (Except Timing Belts)
          • Belt TENSIONER
          • Automatic Transmission Fluid
          • Automatic Transmission Fluid Exchange & Filter Replacement
          • Engine Oil
          • Air Filters
          • Cabin Air Filter
          • Brake Fluid
          • Battery
          • Battery Cables
          • Power Steering
          • Power Steering Fluid
          • Wiper Blades
        • Routine Inspection CHECKSHEET
        • Routine Inspection - UICS
          • Brake Systems
            • Notes
            • Brake Fluid
            • Bulbs And LEDS
            • Hoses
            • Lenses
            • Lug Nut
            • Master Cylinder Cover Gasket
            • Parking Brake Cable
            • Vacuum Hoses
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
          • Drivetrain And Transmission
            • Notes
            • Automatic Transmission Fluid
            • Clutch Master Cylinders
            • Cooler Lines
            • Coolers
            • Differential Fluid
            • Drain Plugs And Gaskets
            • Filters And Screens
            • Fluids And Lubricants
            • Hoses, Lines, And Tubes
            • Hydraulic Fluid
            • Lubricants
            • Manual Transmission Fluid
            • Mounts (Engine, Transaxle And Transmission)
            • Transfer Case Fluid
            • Vacuum Hoses
          • Electrical Systems
            • Batteries
            • Battery Cables
            • Battery Trays And Hold Down Hardware
            • Bulbs, Sealed Beams And LEDS
            • Fuses, Fusible Links And Circuit Breakers
            • Ground Cables And Straps
            • Ground Straps
            • Lenses
            • Sealed Beams
            • Washer Pumps
            • Wiper Arms And Blades
            • Wiper Hoses And Nozzles
            • Wiper Pump Reservoirs
          • Engine Performance And Maintenance
            • Notes
            • Accessory Belts
            • Air Filter Elements
            • Air Filter Gaskets
            • Air Filter Housings And Gaskets
            • Air Pump Belts
            • Batteries
            • Battery Connectors
            • Belt Idler Assemblies (Accessory And Cam Belts)
            • Belt TENSIONERS (Accessory And Cam Belt)
            • Chemical Engine DECARBONIZATION
            • Combustion Chamber Cleaning
            • Coolant Recovery Tanks
            • Coolant
            • Distributor Caps
            • Distributor Rotors
            • Engine Cooling Systems
            • Engine DECARBONIZATION
            • Engine Oil Drain Plugs And Gaskets
            • Engine Oil Filters And Canisters
            • Engine Oil
            • Fuel Filters
            • Fuel Injector Cleaning
            • Fuel Injectors
            • Fuel System Cleaning Service
            • Hose Clamps
            • Hose Connectors
            • Hose Couplers
            • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
            • Ignition Wires (Secondary)
            • Intake Cleaning
            • O2 Sensors
            • PCV Breather Elements
            • PCV Valves
            • Radiator Caps And Pressurized Expansion Tank Caps
            • Spark Plugs
            • Thermostats And Housings
            • Throttle Body Cleaning
            • Timing Belts
            • Vacuum Hoses, Tubes And Connections (Non-Metallic)
          • Exhaust Systems
            • Notes
            • Exhaust And Tail Pipes
          • Heating, Ventilation And Air Conditioning Systems
            • Notes
            • Belts
            • Cabin Air Filters
            • Coolant
            • Evaporator Drain Tubes
            • Evaporator Filters
            • In-Line Filters
            • Vacuum Hoses And Tubes
          • Steering And Suspension, Wheel Alignment, Wheels And Tires
            • Notes
            • Hydraulic Hoses
            • Power Steering Belts
            • Power Steering Fluid
            • Power Steering Hoses
            • Shock Absorbers, Strut Cartridges And Strut Assemblies
            • Strut Rods
            • Tire Pressure Monitoring System
            • Tire Pressure Sensors
            • Tires
            • Valve Stems
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
      • Wheel & Tire Supplement
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
        • Wheels & Tires CHECKSHEET
        • Wheel & Tire - UICS
          • Tire Pressure Monitoring System
          • Tire Pressure Sensors
          • Tires
          • Wheel Alignment
          • Wheel Attachment Hardware
          • Wheels (Rims)
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Check Lists
    • Symptom Check List Worksheet - General Information
      • * Please Read This First *
      • Purpose
        • Notes
        • Why Use the Symptom Check List Worksheets?
        • Making the Worksheets a Part of Your Normal Routine
      • Symptom Check List Worksheets
        • Condensed Version - All On One Page
        • Full Version - All On Four Pages
        • Individual System-Based Check Lists
  • Computer Relearn Procedures
    • Introduction
      • Body Controls
      • Engine Controls
    • ACURA
      • All Models
      • INTEGRA, 3.5RL & 3.2TL
        • ECM/PCM Reset Procedure
        • Final Procedure
        • Known-Good ECM/PCM Substitution
        • ECM/PCM Replacement
    • AUDI
      • All Models
      • A4 1.8L Turbo & A6
        • Notes
        • 1.8L Turbo Readiness Code
      • Pcm Coding (All Models)
    • BMW
      • All Models
      • Component Activation
      • Power Window Calibration
    • DAEWOO
    • HONDA
      • All Models
        • Notes
        • ECM/PCM Reset Procedure
        • Final Procedure
      • Accord, Cr-V, Odyssey, Prelude & S2000
        • Known-Good ECM/PCM Substitution
        • ECM/PCM Replacement
    • HYUNDAI
    • INFINITI
      • ECM Programming
    • ISUZU
      • All Models Except Hombre
      • Hombre
        • BCM Programming/RPO Configuration
        • Password (PASSLOCK) Reprogramming Auto Learn (30-Minute Procedure)
        • Vehicle Driveability Computer Relearn Procedure
    • Jaguar
      • Key Transponder Module (KTM) Synchronization
      • ECM Relearn Procedure
        • Except S-Type
        • S-Type
      • Power Window Calibration (XK8)
      • Radio Security Code
      • TCM DRIVEABILITY Computer Relearn Procedure
    • KIA
    • Land Rover
    • LEXUS
      • Notes
      • Ignition Key Registration (Immobilizer Equipped)
    • MAZDA
      • Immobilizer System (626)
        • Notes
        • Key Replacement Or Addition (Customer Supplied 2 Or More Valid Keys)
        • Key Replacement Or Addition (Customer Supplied Only One Or No Valid Keys)
        • Immobilizer Unit (Customer Supplied At Least One Valid Key)
        • PCM (Customer Supplied 2 Or More Valid Keys)
        • PCM (Customer Supplied Only One Valid Key)
        • Immobilizer Unit & PCM
        • Reprogram Error Recovery
        • Inputting Code Word
    • MERCEDES-BENZ
      • ECM Version Coding
        • Notes
        • Automatic Coding
        • Manual Coding
      • Enabling Code Function For Radio
        • Notes
        • Audio 10 Models (CLK, E & SLK Class)
        • Audio 30 Models (CLK, E & SLK Class)
        • Becker Radio (CL, S & SL Class)
        • Panasonic Exquisite Radio (CL, S & SL Class)
        • Radio With Navigation Control Module (CL, S & SL Class)
        • Radio With 4-Digit Fixed Code (CL, S & SL Class)
        • Radio & Radio With Navigation Control Module With 5-Digit Fixed Code (CL, S & SL Class)
        • Radio (ML Class)
      • Programming Supplemental Restraint System (SRS) Control Module
    • MITSUBISHI
      • ECM
      • Radio Security Code
    • NISSAN
      • Notes
      • ECM Programming
    • PORSCHE
      • All Models
      • BOXSTER
        • Notes
        • Alarm/Drive Block Control Unit Programming
    • SAAB
    • SUBARU
    • SUZUKI
    • TOYOTA
      • Ignition Key Registration (Immobilizer Equipped)
      • Non-Immobilizer Programming (AVALON & CAMRY)
    • VOLKSWAGEN
      • All Models
      • Beetle
        • Notes
        • ECM Programming (1.9L Engine)
        • ECM Programming (2.0L Engine)
        • ECM To TCM Matching (2.0L Engine)
      • CABRIO, Golf, GTI & JETTA
        • Notes
        • ECM Programming (2.0L Engine)
        • ECM Programming (2.8L VR6 Engine)
      • PASSAT
        • Notes
        • ECM Programming (2.8L V6 Engine)
    • VOLVO
      • All Models
        • ECM Programming
        • Radio Security Code
  • OBD-II Drive Cycles
    • * Please Read This First *
    • Drive Cycles
  • Driveline/Axles
    • Drive Axle Noise Diagnosis - General Information
      • * Please Read This First *
      • Unrelated Noises
      • Non-Drive Axle Noises
      • Gear Noise
      • Chuckle
      • Knock
      • Clunk
      • Bearing Whine
      • Bearing Rumble
      • Chatter On Turns
      • Axle Shaft Noise
      • Vibration
    • Gear Tooth Contact Patterns - General Information
      • * Please Read This First *
      • Inspection
        • Notes
        • Gear Tooth Contact Pattern
      • Adjustments
        • Notes
        • Gear Backlash & Pinion Shim Changes
    • Map - Drive Train & Transmission
      • Drive Train & Transmission Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Drivetrain And Transmission
        • Notes
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Automatic Transmission / Transaxle Assemblies/CVTS
        • Automatic Transmission Fluid
        • Axles
        • Bearings And Races
        • Bell Cranks
        • Bell Housings
        • Bushings (External)
        • Cables (Speedometer)
        • Cables (TV, Detent And Shift)
        • Carrier Bearings
        • Clutch Cables And Cable Housings
        • Clutch Discs (Manual Transmissions)
        • Clutch Forks
        • Clutch Linkages (Mechanical)
        • Clutch Master Cylinders
        • Clutch Pedals
        • Clutch Pivots
        • Clutch Pressure Plates
        • Clutch Release Bearings
        • Clutch Slave Cylinders (Concentric)
        • Clutch Slave Cylinders (Conventional Or External)
        • Companion Flanges
        • Connectors
        • Cooler Bypass Valves
        • Cooler Lines
        • Coolers
        • CV Joints
        • Differential And Final Drive Assemblies
        • Differential Fluid
        • Dip Stick Tubes
        • Dip Sticks (Fluid Level Indicators)
        • Dowel Pins, Guides And Pilot Holes
        • Drain Plugs And Gaskets
        • Drive Shaft Flanges
        • Drive Shafts And Half Shafts
        • Dust Boots
        • Engine Mounts
        • Exciter Rings
        • Filler Tubes
        • Filters And Screens
        • Flanges
        • Flex Plates
        • Fluid Level Indicators
        • Fluids And Lubricants
        • Flywheels
        • Force Motors
        • Gaskets
        • Guides
        • Half Shafts
        • Hoses, Lines, And Tubes
        • Housings (Bell, Case, Tail(Extension) And Auxiliary)
        • Hydraulic Fluid
        • Intermediate Shaft Support Bearings
        • Key Interlock Systems
        • Limited Slips
        • Lines
        • Linkages (External)
        • Locking Hub Assemblies
        • Locking Hub Control Knobs
        • Lubricants
        • Manual Transmission Fluid
        • Manual Transmission/Transaxle Assemblies
        • Metal Clad Seals
        • METALASTIC Joints
        • Modulator Pins
        • Modulators
        • Mounts (Engine, Transaxle And Transmission)
        • Odometer Drives (Mechanical)
        • Odometer Heads (Mechanical)
        • Oil Pans
        • Pans
        • Pilot Holes
        • Pressure Plates
        • Pressure Switches
        • Races
        • Rubber Joints (METALASTIC)
        • Screens
        • Seals (Metal Clad)
        • Seals
        • Selector Interlock Systems
        • Sensors
        • Servos
        • Shift Interlock Systems (Selector And Key Interlock Systems)
        • Side Covers
        • Slip Yokes
        • Solenoids
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Speedometer- Driven Gear Housing
        • Speedometer/Odometer Drives (Mechanical)
        • Speedometer/Odometer Heads (Mechanical)
        • Speedometers/Odometers (Electronic)
        • Switches
        • Tone Wheels
        • Toothed Rings (Tone Wheel)
        • Torque Converters
        • Transaxle Mounts
        • Transducers (Transmission)
        • Transfer Case Assemblies
        • Transfer Case Fluid
        • Transmission Coolers
        • Transmission Mounts
        • Transmission Pans
        • Transmission Range Indicators (PRNDL)
        • Tubes
        • Universal Joints (CARDAN Or Cross Type)
        • Vacuum Controls
        • Vacuum Hoses
        • Vacuum Motors
        • Vacuum-Operated Switches
        • Vehicle Speed Sensors
        • Vents
        • Vibration Dampers
        • Wheel Attachment Hardware
        • Wheel Speed Sensors
        • Wiring Harnesses And Connectors
        • Yokes And Slip Yokes
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Trouble Shooting - Clutches - General Information
      • * Please Read This First *
      • All Models
  • DTC Index
    • Anti-Lock/Traction Control
    • Electronic Power Steering
      • Without ESP, BAS & SPS
      • With ESP, BAS & SPS
      • With ABS, ASR, ETS & SPS
    • Keyless Entry Systems - SL500, SL600
    • Engine Performance DTCS
      • SL320
        • SL320 (1994-1996)
        • SL320 (1997)
      • SL500
        • SL500 (1996-1999)
        • SL500 (2001-2002)
        • DI ENGINE 119 (description only)
        • LH ENGINE 119 (description only)
      • SL600
        • SL600 (with test)
        • DI ENGINE 120 (description only)
        • LH ENGINE 120 (description only)
    • HVAC DTCS
      • SL500 (1998-1999)
      • SL500 (2000-2001)
      • SL320, SL500, SL600 (1990-2002)
    • Restraint DTCS
      • SL320, SL500 (1996)
      • SL320, SL500 (1997)
      • SL500 (1998)
      • SL500 (1999)
      • SL500, SL600 (2000)
      • SL500, SL600 (2001)
  • Electrical
    • Map - Electrical Systems
      • Electrical Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Actuator Motors (Electric)
        • Actuator Motors (Vacuum)
        • Air Bags
        • Alternators And Generators
        • Amplifiers
        • Antennas
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Cables
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belts
        • Bulb Sockets
        • Bulbs, Sealed Beams And LEDS
        • Cd Players
        • Cigarette Lighter Assemblies
        • Circuit Breakers
        • Clutch Switches
        • Connectors
        • Control Modules
        • Cruise Control Brake Switches
        • Cruise Control Cables
        • Cruise Control Clutch Switches
        • Cruise Control Linkages And Cables
        • Cruise Control Reservoirs
        • Cruise Control Tubes
        • Cruise Control Vacuum Dump Release Valves
        • Cruise Control Vacuum Hoses, Tubes And
        • Cruise Control Vehicle Speed Sensors
        • Defoggers
        • Defrosters
        • Delays
        • Dimmers
        • Electric Heaters
        • Equalizers
        • Fuse Blocks
        • Fuse Boxes And Blocks
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gauges
        • Generators
        • Ground Cables And Straps
        • Ground Straps
        • Headlight Adjusters
        • Heating Elements (Defrosters, Defoggers, Electric Heaters And Seats)
        • Horns And Sirens
        • Ignition Switches
        • Indicator Lights
        • Keyless Entry Keypads And Transmitters
        • Keyless Entry Transmitters
        • LEDS
        • Lenses
        • Microphones
        • Mirrors (ELECTROCHROMATIC And Heated)
        • Motors
        • Neutral Safety Switches
        • Odometers, Speedometers And Tachometers (Cable Driven)
        • Odometers
        • Power Distribution Center
        • Pulleys
        • Receivers, Amplifiers, Equalizers And Sub-Woofer Volume Controls
        • Relay Boxes
        • Relays
        • Sealed Beams
        • Seat Heaters
        • Security Alarm Sensors
        • Sirens
        • Solenoids
        • Speakers And Microphones
        • Speedometer And Tachometer Linkages And Cables
        • Speedometer Cables
        • Speedometers
        • Starters
        • Sub-Woofer Volume Control
        • Switches
        • Tachometer Cables
        • Tachometers
        • Tape Players And Cd Players
        • TENSIONERS
        • Timers
        • Transceivers
        • Transducers
        • Vacuum Accumulators (Reservoirs)
        • Voltage Regulators
        • Washer Fluid Level Senders
        • Washer Pumps
        • Wiper Arms And Blades
        • Wiper Blades
        • Wiper Hoses And Nozzles
        • Wiper Linkages
        • Wiper Nozzles
        • Wiper Pump Reservoirs
        • Wiring Harnesses And Connectors
      • Battery, Starting & Charging System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
  • Engine
    • Engine Overhaul Procedures - General Information
      • * Please Read This First *
      • Description
      • Engine Identification
      • Inspection Procedures
        • * Please Read This First *
        • General
        • Magnetic Particle Inspection
          • Notes
          • Magnaflux & Magnaglo
        • Penetrant Inspection
          • Notes
          • Zyglo
          • Dye Check
        • Ultrasonic Inspection
        • X-Ray Inspection
        • Pressure Testing
      • Cleaning Procedures
        • * Please Read This First *
        • General
        • Bead Blasting
        • Chemical Cleaning
      • Component Cleaning
        • * Please Read This First *
        • Sheet Metal Parts
        • Intake & Exhaust Manifolds
      • Cylinder Head Replacement
        • * Please Read This First *
        • Removal
        • Installation
        • Valve Adjustment
      • Cylinder Head Overhaul
        • * Please Read This First *
        • Cylinder Head Disassembly
        • Cylinder Head Cleaning & Inspection
        • Valve Springs
        • Valve Guide
          • Notes
          • Measuring Valve Guide Clearance
          • Reaming Valve Guide
          • Replacing Valve Guide
        • Valves & Valve Seats
          • Notes
          • Valve Grinding
          • Valve Lapping
          • Valve Seat Grinding
          • Valve Seat Replacement
          • Valve Seat Concentricity
        • Cylinder Head Reassembly
          • Notes
          • Valve Stem Installed Height
        • Valve Stem Oil Seals
          • Notes
          • Replacement (On-Vehicle)
        • Valve Spring Installed Height
        • Rocker Arms & Assemblies
          • Notes
          • Rocker Studs
          • Rocker Arms & Shafts
        • Push Rods
        • Lifters
          • Notes
          • Hydraulic Lifters
          • Mechanical Lifters
      • Pistons, Connecting Rods & Bearings
        • * Please Read This First *
        • Ridge Removal
        • Piston & Connecting Rod Removal
        • Piston & Connecting Rod
          • Notes
          • Disassembly
          • Cleaning
          • Inspection
        • Piston & Cylinder Bore Fit
        • Assembling Piston & Connecting Rod
        • Checking Piston Ring Clearances
        • Piston & Connecting Rod Installation
        • Connecting Rod Side Clearance
        • Main & Connecting Rod Bearing Clearance
          • Notes
          • Plastigage Method
          • Micrometer & Telescopic Gauge Method
      • Crankshaft & Main Bearings
        • * Please Read This First *
        • Removal
        • Cleaning & Inspection
        • Installation
        • Crankshaft End Play
          • Notes
          • Dial Indicator Method
          • Feeler Gauge Method
        • Cylinder Block
          • Notes
          • Block Cleaning
          • Block Inspection
          • Cylinder Bore Inspection
          • Cylinder Honing
          • Deck Warpage
          • Deck Height
          • Main Bearing Bore & Alignment
          • Expansion Plug Removal
          • Expansion Plug Installation
          • Oil Gallery Plug Removal
          • Oil Gallery Plug Installation
      • Camshaft
        • * Please Read This First *
        • Cleaning & Inspection
        • Camshaft Bearings
          • Notes
          • Removal & Installation
        • Camshaft Installation
        • Camshaft End Play
      • Timing Chains & Belts
        • * Please Read This First *
        • Timing Chains
        • Timing Belts
        • Tension Adjustment
      • Timing Gears
        • * Please Read This First *
        • Timing Gear Backlash & RUNOUT
        • Rear Main Oil Seal Installation
          • Notes
          • One-Piece Type Seal
          • Rope Type Seal
          • Split-Rubber Type Seal
      • Oil Pump
        • * Please Read This First *
        • Rotor Type
        • Gear Type
      • Break-In Procedure
        • * Please Read This First *
        • Engine Pre-Oiling
        • Initial Start-Up
        • Camshaft
        • Piston Rings
        • Final Adjustments
    • General Cooling System Service - General Information
      • * Please Read This First *
      • Description
      • Maintenance
        • Draining
        • Flushing
          • Notes
          • Radiator
          • Engine Block
        • Refilling
      • Testing
        • Thermostat
        • Pressure Testing
          • Notes
          • Radiator Cap
          • Cooling System
  • Engine Performance
    • Electrostatic Discharge Warning - General Information
      • * Please Read This First *
      • Introduction
      • Handling Static-Sensitive Circuits/Devices
      • Checking Static-Sensitive Circuits/Devices
    • Engine Performance Diagnostic Routine Outline - General Information
      • * Please Read This First *
      • Where Does DRIVEABILITY Diagnosis Start?
        • Perform Basic Inspection
        • Check For Trouble Codes
        • Diagnose Symptom
        • Test System
    • Engine Performance Safety Precautions
      • Engine Performance Safety Precautions
    • Map - Engine Performance & Maintenance
      • Engine Performance And Maintenance (Including Exhaust Systems)
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Engine Performance & Maintenance CHECKSHEET
      • Engine Performance And Maintenance
        • Notes
        • Accelerator Pedal Position Sensor
        • Accessory Belts
        • Accessory Pulleys
        • Air Conditioning Cycling Switches
        • Air Conditioning Pressure Sensors
        • Air Ducts And Tubes
        • Air Filter Elements
        • Air Filter Gaskets
        • Air Filter Housings And Gaskets
        • Air Fuel Ratio Sensors
        • Air Injection Control Solenoids
        • Air Plenums
        • Air Pump Belts
        • Air Pumps (Electric Driven)
        • Air Tubes
        • Aspirator, Check And DECEL Valves
        • Baffles
        • Ballast Primary Supply Resistor Wires
        • Ballast Resistors And Primary Supply Resistors
        • Barometric Pressure Sensors
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Connectors
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belt Idler Assemblies (Accessory And Cam Belts)
        • Belt TENSIONERS (Accessory And Cam Belt)
        • Belt-Driven Air Pumps
        • Boost Control Mechanism
        • Camshaft Position Sensors
        • Carburetors And Chokes
        • Casting Core Plugs And Expansion Plugs
        • Charge Air Coolers ""INTERCOOLERS"" (CAC)
        • Check Valves
        • Chemical Engine DECARBONIZATION
        • Chokes
        • Clutch Pedal Position Switches
        • Cold Start Injectors
        • Combustion Chamber Cleaning
        • Connectors
        • Coolant Recovery Tanks
        • Coolant
        • Cooling Fan Motor Modules
        • Cooling Fan Motor Relays And Modules
        • Cooling Fan Motor Resistors
        • Cooling Fan Motor Sensors And Switches
        • Cooling Fan Motor Switches
        • Cooling Fan Motors
        • Crankshaft Position Sensors
        • Cylinder Deactivation Solenoid
        • Cylinder Head Assemblies
        • DECEL Valves
        • Deflectors
        • Dip Stick Tubes
        • Dip Sticks And Tubes
        • Distributor Advances And Retarders (Mechanical And Vacuum)
        • Distributor Boots And Shields
        • Distributor Caps
        • Distributor Retarders (Mechanical And Vacuum)
        • Distributor Rotors
        • Distributor Shields
        • Distributors
        • Early Fuel Evaporation Valves (Heat Riser Assemblies)
        • EGR Coolers
        • EGR Exhaust Manifold Passages
        • EGR Intake And Exhaust Manifold Passages
        • EGR Plates And Coolers
        • Electronic Spark Control Modules
        • Electronic Transmission Control Devices
        • Electronic Transmission Feedback Devices
        • Engine Coolant Temperature Sensors
        • Engine Cooling Systems
        • Engine Covers (Oil Pan, Valve Cover, Timing Cover)
        • Engine DECARBONIZATION
        • Engine Oil Canisters
        • Engine Oil Coolers (External)
        • Engine Oil Drain Plugs And Gaskets
        • Engine Oil Filters And Canisters
        • Engine Oil Gaskets
        • Engine Oil Pressure Gauges (Mechanical)
        • Engine Oil
        • Evaporative Emissions (EVAP) Canister Filters
        • Evaporative Emissions (EVAP) Canister Purge Devices
        • Evaporative Emissions (EVAP) Canisters
        • Evaporative Emissions (EVAP) Feedback Devices
        • Exhaust Gas RECIRCULATION Devices
        • Exhaust Gas RECIRCULATION Feedback Devices
        • Expansion Plugs
        • Fan Control Sensor
        • Fuel Accumulators And Dampers
        • Fuel And Cold Start Injectors
        • Fuel Caps
        • Fuel Dampers
        • Fuel Delivery Check Valves
        • Fuel Distributors (BOSCH Cis)
        • Fuel Filler Necks And RESTRICTORS
        • Fuel Filters
        • Fuel Injector Cleaning
        • Fuel Injectors
        • Fuel Level Senders
        • Fuel Pressure Regulators
        • Fuel Pumps (In-Tank, External, Electrical Or Mechanical)
        • Fuel Rails
        • Fuel RESTRICTORS
        • Fuel System Cleaning Service
        • Fuel Tanks
        • Fuel
        • Gaskets
        • Grommets (Valve Cover)
        • Harmonic Dampers
        • Heater Control Valves
        • Heater Cores
        • Hose Clamps
        • Hose Connectors
        • Hose Couplers
        • Hoses And Tube Couplers, Connectors And Clamps
        • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
        • Housings
        • Idle Air Controls
        • Idle Speed Control Actuators
        • Ignition Boots
        • Ignition Coil Towers
        • Ignition Coils
        • Ignition Control Modules (ICM)
        • Ignition Switches
        • Ignition Terminals
        • Ignition Wires (Secondary)
        • Inertia Fuel Shut-Off Switches
        • Intake Air Temperature Sensors
        • Intake Cleaning
        • Intake Manifolds
        • In-Tank Fuel Strainers
        • INTERCOOLERS
        • Knock Sensors
        • Liquid Vapor Separators
        • Long Block Assemblies
        • Manifold Absolute Pressure (Map) Sensors
        • Mass Air Flow (MAF) Sensors
        • Metal Air Manifolds And Pipes
        • Metal Air Pipes
        • Mix Control Solenoids
        • Motor Mounts
        • O2 Sensors
        • Oil Pans
        • Oil Pressure Sending Units
        • Oil Pump Pick-Up Screens
        • Oil Pumps
        • O-Rings, Gaskets, Seals And Spring Locks
        • Park Neutral Position Switches
        • PCV Breather Elements
        • PCV Orifices
        • PCV Valves
        • Pick-Up Assemblies (Includes Magnetic, Hall Effect And Optical)
        • Power Steering Pressure Sensors
        • Powertrain Control Modules (Pcm) And Prom
        • Powertrain Control Prom
        • Pressurized Expansion Tank Caps
        • Radiator / Cooling Fan Blades
        • Radiator / Cooling Fan Clutches
        • Radiator Caps And Pressurized Expansion Tank Caps
        • Radiators
        • Roll Over Valves
        • Sealing Compounds
        • Seals
        • Secondary Air Injection System Management Devices
        • Sensors
        • Short Block Assemblies
        • Shrouds, Baffles And Deflectors
        • Spark Plugs
        • Spring Locks
        • Super Chargers
        • Switches
        • Thermal Vacuum Valves
        • Thermostatic Air Door Assemblies
        • Thermostats And Housings
        • Throttle Bodies
        • Throttle Body Cleaning
        • Throttle Cables
        • Throttle Linkages And Cables
        • Throttle Position Sensors
        • Throttle Position Switches
        • Timing Belt Sprockets
        • Timing Belts
        • Timing Covers
        • Torque Struts
        • Transmission Range Switches
        • Tube Clamps
        • Tube Connectors
        • Tube Couplers
        • Tubes
        • Turbo Chargers
        • Vacuum Connections
        • Vacuum Hoses, Tubes And Connections (Non-Metallic)
        • Vacuum Regulator Solenoids
        • Vacuum Tubes
        • Valve Covers
        • Vehicle Speed Senors
        • Volume Air Flow Sensors
        • Waste Gate And Boost Control Mechanisms
        • Waste Gate Control Solenoids
        • Water Pumps (Electric)
        • Water Pumps (Non-Electric)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Parasitic Load Explanation & Test Procedures - General Information
      • * Please Read This First *
      • General Information
      • Testing For Parasitic Load
        • Notes
        • CHRYSLER Ignition Off Draw (IOD) Test
        • Test Procedure Using Test Switch
        • Intermittent Parasitic Load Problems
        • Diode Check & Solenoid Test
        • Quad Driver Test
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
    • Waveforms - Injector Pattern Tutorial - General Information
      • * Please Read This First *
      • Purpose Of This Article
        • Notes
        • Scope Of This Article
      • Is A Lab Scope Necessary?
        • Introduction
        • Overview Of NOID Light
          • Notes
          • Use the Right Noid Light
        • Overview Of DVOM
          • Notes
          • Checking Injector Resistance
          • Checking Available Voltage At the Injector
          • Checking Injector On-Time With Built-In Function
          • Checking Injector On-Time With Dwell Or Duty
          • How A Duty Cycle Meter and Dwell Meter Work
          • Strengths of Dwell/Duty Meter
          • Weaknesses of Dwell/Duty Meter
      • The Two Types Of Injector Drivers
        • Notes
        • Overview
        • Voltage Controlled Circuit ("Saturated Switch")
        • Current Controlled Circuit ("Peak & Hold")
      • The Two Ways Injector Circuits Are Wired
      • Interpreting Injector Waveforms
        • Notes
        • Interpreting A Voltage Controlled Pattern
        • Interpreting A Current Controlled Pattern
      • Current Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
      • Voltage Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
  • Map - Exhaust Systems
    • Exhaust Systems
      • Notes
      • Map Standards Of Service
      • The Map Process - Overview
      • The Map Process - Overview Of Service Requirements And Suggestions
      • Catalytic Converters
      • Exhaust And Tail Pipes
      • Exhaust Connections
      • Hangers
      • Heat Risers (Mechanical EFE Devices)
      • Heat Shields
      • Manifolds (Cast And Tube Type)
      • Mechanical EFE Devices
      • Muffler Valve
      • Mufflers And Resonators
    • Reason Code Explanation
  • Heating, Ventilation & A/C (HVAC)
    • Map - Heating, Ventilation, & Air Conditioning
      • Heating, Ventilation & Air Conditioning Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accumulators
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Air Conditioning Fittings
        • Air Conditioning Hoses
        • Air Conditioning Metal Lines
        • Air Control Doors
        • Air Dams (External)
        • Air Distribution System
        • Belts
        • Blend Doors
        • Blower Fans (Blower Wheel Or Squirrel Cage)
        • Blower Motors
        • Blower Resistors
        • Blower Switches
        • Cabin Air Filters
        • Circuit Breakers
        • Compressor Clutch Assemblies
        • Compressors
        • Condenser Air Seals
        • Condenser Fan Motors
        • Condensers
        • Connectors
        • Control Cables
        • Control Heads (Function Selectors)
        • Control Linkages
        • Control Modules
        • Coolant
        • Cooling Fan Blades
        • Cooling Fan Clutches
        • Cooling Fan Motors
        • Evaporator Drain Tubes
        • Evaporator Filters
        • Evaporator Pressure Regulators (EPRS)
        • Evaporators
        • Expansion Valves
        • Function Selectors
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gaskets
        • Heater Cases
        • Heater Control Valves
        • Heater Cores
        • Heater Hoses
        • High Pressure Relief Valves (HPRV)
        • Idlers
        • In-Line Filters
        • Metal Fittings
        • Metal Lines
        • Mix And Air Control Doors (Blend Doors)
        • ORIFACE Tubes
        • O-Rings
        • Pilot-Operated Absolutes (POAS)
        • Plenums
        • Pressure Control Valves
        • Pressure Sensors
        • Pulleys
        • Radiators
        • Receiver-DRIERS
        • Refrigerant Oil
        • Refrigerant
        • Relays
        • Seals
        • Service Ports
        • Spring Lock Couplings
        • Suction Throttling Valves (STVS)
        • Switches (Electrical)
        • TENSIONERS
        • Thermistors And Pressure Sensors
        • Thermostats And Housings
        • Vacuum Hoses And Tubes
        • Vacuum Reservoirs
        • Vacuum Tubes
        • Valves In Receiver (VIRS)
        • Water Pumps (Electric Auxiliary)
        • Wiring Harnesses And Connectors
      • Heating, Ventilation & Air Conditioning System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Hoist/Jack
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
  • Identification
    • CANADIAN Model Cross-Reference
      • * Please Read This First *
      • ACURA
      • ASUNA
      • AUDI
      • BMW
      • CHRYSLER Corp.
        • CHRYSLER
        • Dodge
        • Eagle
        • PLYMOUTH
      • General Motors
        • BUICK
        • CHEVROLET
        • GMC
        • OLDSMOBILE
        • Optima
        • PONTIAC
      • HYUNDAI
      • Jaguar
      • KIA
      • MAZDA
      • MERCEDES-BENZ
      • Mercury
      • MERKUR
      • MITSUBISHI
      • NISSAN
      • RENAULT
      • SATURN
      • Smart
      • SUBARU
      • SUZUKI
      • TOYOTA
      • VOLKSWAGEN
      • VOLVO
      • All Others
    • MERCEDES-BENZ Model Identification
      • Model Identification
        • 1989 Model Identification Table
        • 1990 Model Identification Table
        • 1991 Model Identification Table
        • 1992 Model Identification Table
        • 1993 Model Identification Table
        • 1994 Model Identification Table
        • 1995 Model Identification Table
        • 1996 Model Identification Table
        • 1997 Model Identification Table
        • 1998 Model Identification Table
        • 1999 Model Identification Table
        • 2000 Model Identification Table
        • 2001 Model Identification Table
        • 2002 Model Identification Table
        • 2003 Model Identification Table
        • 2004 Model Identification Table
        • 2005 Model Identification Table
        • 2006 Model Identification Table
        • 2007 Model Identification Table
        • 2008 Model Identification Table
        • 2009 Model Identification Table
        • 2010 Model Identification Table
        • 2011 Model Identification Table
        • 2012 Model Identification Table
        • 2013 Model Identification Table
        • 2014 Model Identification Table
        • 2015 Model Identification Table
        • 2016 Model Identification Table
        • 2017 Model Identification Table
        • 2018 Model Identification Table
  • Metric Conversions
    • Engine Displacement Conversion Table - ECAT
      • Conversion Table
    • Metric Conversions
      • Metric Conversions
        • Notes
        • Length
        • Volume
        • Torque
        • Pressure
      • Conversion Factors
  • OEM General Information
    • Emergency Equipment -- 129 Chassis
      • Repair & Adjustments
        • General description (Make Engel as from 10/83) - RA86000000001Z(86-001)
        • Removal and installation of refrigerator box - RA86000000005Z(86-005)
        • Removal and installation of refrigerator box supply unit - RA86000000007Z(86-007)
        • Removal and installation of thermostat switch - RA86000000010Z(86-010)
        • Removal and installation of refrigeration unit - RA86000000012Z(86-012)
        • Removal and installation of indicator lamp - RA86000000015Z(86-015)
        • Removal and installation of automatic cutout - RA86000000017Z(86-017)
        • Function tests - RA86000000020Z(86-020)
        • Programmed repairs Refrigerator box (make Engel) - RA8600000PR00Z
    • How To Use The Engine Performance Section
      • * Please Read This First *
      • How To Use The Engine Performance Section
      • Application
        • Notes
        • Introduction/Engine/VIN Id
      • Emission Applications
        • Notes
        • Emission Application Tables
      • Specifications
        • Notes
        • Service & Adjustment Specifications
      • Adjustment
        • Notes
        • On-Vehicle Adjustments
      • Theory & Operation
      • Testing & Diagnostics
        • Notes
        • Basic Diagnostic Procedures/Basic Testing
        • Self-Diagnostics/Tests W/Codes
        • Trouble Shooting - No Codes/Tests W/O Codes
        • System & Component Testing
      • Pin Voltage Charts
      • Sensor Range Charts
        • Notes
        • Sensor Operating Range Charts
      • Vacuum Hose Diagram(S)
      • Removal, Overhaul & Installation
      • Wiring Diagrams - Engine Performance
        • Notes
        • 2002 & Earlier
        • 2003 & Later
    • MERCEDES-BENZ Model Identification
      • Model Identification
        • 1989 Model Identification Table
        • 1990 Model Identification Table
        • 1991 Model Identification Table
        • 1992 Model Identification Table
        • 1993 Model Identification Table
        • 1994 Model Identification Table
        • 1995 Model Identification Table
        • 1996 Model Identification Table
        • 1997 Model Identification Table
        • 1998 Model Identification Table
        • 1999 Model Identification Table
        • 2000 Model Identification Table
        • 2001 Model Identification Table
        • 2002 Model Identification Table
        • 2003 Model Identification Table
        • 2004 Model Identification Table
        • 2005 Model Identification Table
        • 2006 Model Identification Table
        • 2007 Model Identification Table
        • 2008 Model Identification Table
        • 2009 Model Identification Table
        • 2010 Model Identification Table
        • 2011 Model Identification Table
        • 2012 Model Identification Table
        • 2013 Model Identification Table
        • 2014 Model Identification Table
        • 2015 Model Identification Table
        • 2016 Model Identification Table
        • 2017 Model Identification Table
        • 2018 Model Identification Table
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
    • Tools -- 129 Chassis
      • Shop-Made Tools
        • Guard plate for radiator / condenser - WF58.50-P-0110-01A
        • Extension for counterholder - WF58.50-P-0330-02A
        • Oil filter cap with test connection for oil pressure measurement - WF58.50-P-1800-01A
        • Connection fitting for automatic transmission fluid pipes - WF58.50-P-2020-01A
        • Shell halves (2 ea.) for pressing off and caulking the inner constant velocity joint. - WF58.50-P-3530-01A
        • Support for retaining device - WF58.50-P-4020-01A
        • Plug gauge for rear wheel location - WF58.50-P-4030-01A
        • Drift for releasing the fitting sleeves in the flexible couplings - WF58.50-P-4110-01A
        • Wiring harness for actuation of switchover valve - WF58.50-P-4210-01A
        • Measurement connection for checking non-return valve or brake booster - WF58.50-P-4310-01A
        • U-bolt for assembling protective sleeve on steering lock - WF58.50-P-4610-01A
  • Maintenance Reminder Light (Reset Procedures)
    • Maintenance Service Reminder (FSS)
      • Notes
      • Maintenance Service Reminder Reset - Button Identification
      • Maintenance Service Reminder Reset - Procedure 01
      • Maintenance Service Reminder Reset - Procedure 02
      • Maintenance Service Reminder Reset - Procedure 03
      • Maintenance Service Reminder Reset - Procedure 04
      • Maintenance Service Reminder Reset - Procedure 05
      • Maintenance Service Reminder Reset - Procedure 06
      • Maintenance Service Reminder Reset - Procedure 07
      • Maintenance Service Reminder Reset - Procedure 08
      • Maintenance Service Reminder Reset - Procedure 09
    • Maintenance Service Reminder (Service Indicator)
      • Notes
      • Maintenance Service Reminder Reset - Procedure 01
        • Notes
        • AP00.20-P-0042GZ
      • Maintenance Service Reminder Reset - Procedure 02
        • Notes
        • AP00.20-P-0042V
      • Maintenance Service Reminder Reset - Procedure 03
        • Notes
        • AP00.20-P-0042SLR
      • Maintenance Service Reminder Reset - Procedure 04
        • Notes
        • AP00.20-P-0042PIT
      • Maintenance Service Reminder Reset - Procedure 05
        • Notes
        • With Comfort Multifunction Steering Wheel (12 Buttons) - AP00.20-P-0042CV
        • With Multifunction Steering Wheel (4 Buttons) - AP00.20-P-0042CW
      • Maintenance Service Reminder Reset - Procedure 06
        • Notes
        • AP00.20-P-0042EW
      • Maintenance Service Reminder Reset - Procedure 08
        • Notes
        • AP00.20-P-0042TA
      • Maintenance Service Reminder Reset - Procedure 09
        • Notes
        • AP00.20-P-0042M
      • Maintenance Service Reminder Reset - Procedure 10
        • Notes
        • Reset Service Indicator - AP00.20-P-0042SX
        • Add / Deselect Service Item - AP00.20-P-0042-02SX
        • Reset Complete Service - AP00.20-P-0042-01SX
        • Reset Individual Service - AP00.20-P-0042-01SY
      • Maintenance Service Reminder Reset - Procedure 11
        • Notes
        • AP00.20-P-0042TX
      • Maintenance Service Reminder Reset - Procedure 12
        • Notes
        • AP00.20-P-0042RT
      • Maintenance Service Reminder Reset - Procedure 13
        • Notes
        • AP00.20-P-0042GP
      • Maintenance Service Reminder Reset - Procedure 14
        • Notes
        • AP00.20-P-0042GG (2008-2011)
        • AP00.20-P-0042GA (2012-)
      • Maintenance Service Reminder Reset - Procedure 15
      • Maintenance Service Reminder Reset - Procedure 16
        • Notes
        • AP00.20-D-0040-01HA - Without Multifunction Steering Wheel
        • AP00.20-D-0040-01HB - With Multifunction Steering Wheel (CODE CL4)
      • Maintenance Service Reminder Reset - Procedure 17
      • Maintenance Service Reminder Reset - Procedure 18
        • Notes
        • AP00.20-P-0043HA
      • Maintenance Service Reminder Reset - Procedure 19
        • Notes
        • AP00.20-P-0043E
      • Maintenance Service Reminder Reset - Procedure 20
        • Notes
        • AP00.20-S-0040EB
      • Maintenance Service Reminder Reset - Procedure 21
        • Notes
        • AP00.20-P-0043J
    • Maintenance Service Reminder (Service Reminder)
      • Notes
      • Maintenance Service Reminder Reset Procedure
    • Emissions Maintenance Reminder
      • Notes
      • Emissions Maintenance Reminder Reset Procedure
    • Tire Pressure Monitor System Reminder
      • Notes
      • TPMS Reminder Reset - Procedure 01
        • Notes
        • Vehicle Manufacture Date Up To 9/30/00
        • Vehicle Manufacture Date 10/1/00 To 5/31/01
        • Manufacture Date After 5/31/01
      • TPMS Reminder Reset - Procedure 02
      • TPMS Reminder Reset - Procedure 03
      • TPMS Reminder Reset - Procedure 04
      • TPMS Reminder Reset - Procedure 05
        • Notes
        • Models With Body 210
        • Models With Body 211
      • TPMS Reminder Reset - Procedure 06
      • TPMS Reminder Reset - Procedure 07
      • TPMS Reminder Reset - Procedure 08
      • TPMS Reminder Reset - Procedure 09
      • TPMS Reminder Reset - Procedure 10
      • TPMS Reminder Reset - Procedure 11
      • TPMS Reminder Reset - Procedure 13
      • TPMS Reminder Reset - Procedure 14
      • TPMS Reminder Reset - Procedure 15
        • Notes
        • Restarting The Tire Pressure Monitor (Direct TPMS)
        • Restarting The Tire Pressure Loss Warning System (Indirect TPMS)
      • TPMS Reminder Reset - Procedure 16
      • TPMS Reminder Reset - Procedure 17
      • TPMS Reminder Reset - Procedure 18
        • Notes
        • Vehicles Without Multifunction Steering Wheel Controls
        • Vehicles With Multifunction Steering Wheel Controls
      • TPMS Reminder Reset - Procedure 19
        • Notes
        • Vehicles With Steering Wheel Buttons
        • Vehicles Without Steering Wheel Buttons
      • TPMS Reminder Reset - Procedure 20
  • Restraints
    • Air Bag/SRS Component Inspection & Replacement Tables - EUROPEAN
      • ALFA Romeo (1991-95)
      • AUDI (1989-04)
      • BMW (1986-04)
      • Jaguar (1990-04)
      • Land Rover (1995-04)
      • MERCEDES-BENZ (1986-04)
      • Mini (2002-04)
      • PORSCHE (1987-04)
      • SAAB (1989-04)
      • VOLKSWAGEN (1990-04)
      • VOLVO (1987-04)
  • Specifications Index
    • Common Specs & Procedures
      • Specifications Index
  • Steering
    • Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
      • Steering & Suspension Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Wheel And Tire
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
      • Steering & Suspension CHECKSHEET
      • Wheels & Tires CHECKSHEET
      • Steering And Suspension, Wheel Alignment, Wheels And Tires
        • Notes
        • Active Handling
        • Active Suspension Control Modules
        • Active Variable Ratio Steering
        • Active Yaw Control
        • Adaptive Cruise Control
        • Advance TRAC
        • Air Bags
        • Air Ride Control Modules
        • Air Ride Suspension Torsion Springs (Counter Balancing)
        • Air Ride Suspension
        • Air Ride Tubes
        • Air Shocks And Air Struts
        • Air Spring Valves
        • Air Springs
        • Air Suspension Control Valves
        • Air Suspension DRIERS
        • Axle Acceleration Sensor
        • Ball Joints
        • Body Acceleration Sensor
        • Bushings
        • Center Links
        • Compressors
        • Continuous Damping Control
        • Control Arm Shafts
        • Control Arms
        • Control Modules
        • Distance Regulation Control Module
        • Distance Regulation Sensor
        • Drag Links
        • Dynamic Stability Control
        • Dynamic Stability Traction Control
        • Electronic Ride Control Shocks And Struts
        • Electronic Stability Control
        • Electronic Suspension System
        • Flex Couplers
        • Gaskets
        • Height Sensors
        • Hydraulic Hoses
        • Hydraulic Power Steering Pumps
        • Hydraulic Suspension Hoses
        • Hydraulic Suspension Pumps
        • Idler Arms
        • Intermediate Shaft U-Joints
        • King Pins
        • Modules
        • Pitman Arms
        • Power Steering Belts
        • Power Steering Coolers
        • Power Steering Fluid
        • Power Steering Hoses
        • Power Steering Lines (Steel)
        • Power Steering Pumps - Electric
        • Power Steering Pumps
        • Radar Sensor
        • Radius Arms
        • Relay Rods
        • Relays
        • Sensors
        • Shock Absorbers, Strut Cartridges And Strut Assemblies
        • Spindles
        • Springs, Coil, Leaf And Torsion Bars
        • STABILITRAC
        • Stability Management System
        • Steering Angle Sensor
        • Steering Arms
        • Steering Couplers
        • Steering Dampers
        • Steering Gears (Except Rack And Pinion)
        • Steering Gears, Rack And Pinion
        • Steering Knuckles
        • Strike Out Bumpers
        • Strut Bearing Plate Assemblies
        • Strut Rods
        • Suspension Pumps (Hydraulic)
        • Sway Bar Links
        • Sway Bar Mounting Bushings
        • Sway Bars
        • Switches
        • Tie Rod Ends (Inner And Outer)
        • Tire Pressure Monitoring System
        • Tire Pressure Sensors
        • Tires
        • Torque Sensor
        • Torsion Springs
        • Track Bar Bushings
        • Track Bars
        • Trailing Arm Bushings
        • Trailing Arms
        • Valve Stems
        • Vehicle Dynamics Control
        • Vehicle Speed Sensor
        • Vehicle Stability Assist
        • Vehicle Stability/Skid Control
        • Warning Lamps
        • Wheel Alignment
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheels (Rims)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Wheel Alignment Theory & Operation - General Information
      • * Please Read This First *
      • Pre-Alignment Instructions
        • Notes
        • General Alignment Checks
      • Adjustments
        • Notes
        • Camber
        • Caster
        • Toe-In Adjustment
        • Toe-Out On Turns
        • Steering Axis Inclination
  • Traction Control Disable Procedures
    • Traction Control Disable
      • MERCEDES TSB: S-B-14.00/31
        • Notes
        • Attachment 1: Vehicles That Must Be Tested On A 4-Wheel Dynamometer
        • Attachment 2: DYNO-Mode Activation Procedure For Operation Of A 2WD Vehicle On A 2-Wheel Dynamometer
      • Disable Procedures
  • Trouble Shooting - Manual Transmission - General Information
    • * Please Read This First *
    • Introduction
• Heating, Ventilation & A/C (HVAC)
  • A/C Compressor
    • Air Compressor, Belt Drives -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9104AB
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9113AB
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9119AB
        • Testing and repair work: Passenger cars: Air compressor, belt drives - AR13.00-Z-9120AB
        • Removing and installing poly V-belt - AR13.22-P-1202
          • Removing and installing poly V-belt - AR13.22-P-1202AO
          • Remove, install poly V-belt - AR13.22-P-1202B
        • Poly V-belt running diagram - AR13.22-P-3902
          • Poly V-belt running diagram - AR13.22-P-3902-02AO
          • Running diagram of poly V-belt - AR13.22-P-3902-02B
        • Remove/install poly-V belt tensioning device - AR13.25-P-3200B
      • Maintenance
        • Check condition of poly V-belt; to do so, gradually turn the engine. - AP13.22-P-1351-02C
      • Repair & Adjustments
        • Removing and installing poly V-belt - RA13001041200X(13-1200)
        • Checking poly V-belt, typical types of damage - RA13001041230X(13-1230)
        • Poly V-belt, running diagrams, dimensions - RA13001041240X(13-1240)
        • Removing and installing tensioning device - RA1300104320XX(13-3200)
        • Removing and installing belt pulley of tensioning device (2nd version) - RA13001043250X(13-3250)
        • Removing and installing guide pulley - RA13001043460X(13-3460)
          • Removing and installing guide pulley - RA13001043460X(13-3460)
          • Removing and installing guide pulley - RA13001203460X(13-3460)
        • Removing and installing shock absorber of tensioning device - RA13001044000X(13-4000)
        • Removing and installing carrier of air pump/generator, models 202, 210 - RA13001044200X(13-4200)
        • Removing and installing poly V-belt - RA13001193420X(13-3420)
        • Examining poly V-belt, damage patterns - RA13001193430X(13-3430)
          • Examining poly V-belt, damage patterns - RA13001193430X(13-3430)
          • Examining poly V-belt, typical damage - RA13001203430X(13-3430)
        • Poly V-belts, running diagrams, dimensions - RA13001193440X(13-3440)
        • Removing and installing tensioning device - RA13001193450X(13-3450)
          • Removing and installing tensioning device - RA13001193450X(13-3450)
          • Removing and installing tensioning device - RA13001203450X(13-3450)
        • Inspecting tensioning device (1st version) - RA13001193452X(13-3452)
        • Technical modifications Engine 120 Mechanical II - RA1300120TA00X
  • General Servicing
    • A/C Refrigerant Oil & Refrigerant Specifications
      • A/C Refrigerant Oil & Refrigerant Specifications
    • Air Conditioning Compressor Servicing
      • CALSONIC
        • Notes
        • Clutch Coil
          • Removal
          • Installation
      • Ford FS-10
        • Clutch Coil
          • Removal
          • Installation
        • Shaft Seal
          • Removal
          • Installation
      • HALLA HS-15 & HALLA HS-18
        • Notes
        • Clutch Coil
          • Removal
          • Installation
        • Shaft Seal
          • Notes
          • Removal
          • Installation
      • HARRISON (DELPHI Thermal) Hd6/Ht6 6-Cylinder
        • Clutch Coil & Bearing Assembly
          • Notes
          • Removal
          • Installation
        • Shaft Seal
          • Notes
          • Removal
          • Installation
      • HARRISON (DELPHI Thermal) V7 7-Cylinder
        • Clutch Coil & Bearing Assembly
          • Notes
          • Removal
          • Installation
        • Shaft Seal
          • Removal
          • Installation
      • KEIHIN Scroll
        • Notes
        • Clutch Coil
          • Removal
          • Installation
      • NIPPONDENSO (DENSO)
        • Notes
        • Clutch Coil
          • Removal (Acura, Honda & Isuzu)
          • Installation
          • Removal (Mazda Miata)
          • Removal (Mercedes-Benz & Mitsubishi)
          • Removal (Suzuki)
          • Removal (All Others)
        • Shaft Seal
          • Notes
          • Removal (Mitsubishi)
          • Installation
      • PANASONIC Rotary Vane
        • Clutch Coil
          • Removal (Mazda)
          • Installation
        • Thermal Protector
          • Removal (Mazda)
          • Installation
      • SANDEN Scroll
        • Notes
        • Clutch Coil & Shaft Seal
          • Notes
          • Removal (Mitsubishi)
          • Installation
          • Removal (Honda)
          • Removal (Mazda)
      • SANDEN 7-Cylinder
        • Clutch Coil & Bearing
          • Removal (Jaguar)
          • Installation
        • Shaft Seal
          • Removal (Jaguar)
          • Installation
          • Removal (Suzuki)
        • Clutch Coil
          • Removal (Suzuki)
          • Installation
      • SEIKO-SEIKI Rotary Vane
        • Clutch Coil
          • Removal (Suzuki)
          • Installation
        • Shaft Seal
          • Removal (Suzuki)
          • Installation
      • ZEXEL Rotary Vane
        • Notes
        • Clutch Coil & Bearing
          • Removal (Honda, Isuzu & Kia)
          • Installation
          • Removal (Nissan)
      • ZEXEL 6-Cylinder
        • Notes
        • Clutch Coil & Bearing
          • Removal (Audi)
          • Installation
          • Removal (Volvo)
    • Air Conditioning System Compressor Applications
      • Air Conditioning System Compressor Applications
    • Air Conditioning System Compressor Refrigerant Oil Checking
      • Refrigerant Oil
      • Servicing Precautions
        • Discharging System
        • Disconnecting Lines & Fittings
        • Connecting Lines & Fittings
        • Placing System In Operation
      • CALSONIC
        • V6
          • Infiniti & Nissan
      • Ford & HALLA
        • Ford FS-10 10-Cylinder
          • Notes
          • Mazda (B2300, B2500, B3000 & B4000 & Tribute)
          • Nissan (Quest)
        • HALLA HS-15 & HALLA HS-18
          • Notes
          • Hyundai & Kia (Optima & Magentis (Canadian))
      • HARRISON (DELPHI Thermal)
        • Hd6/Ht6 & Ht6/Hp6 6-Cylinder
          • Isuzu (Hombre 4.3L & Trooper)
        • V7 7-Cylinder
          • Isuzu (Hombre 2.2L)
      • KEIHIN
        • Scroll
          • Honda
      • NIPPONDENSO (DENSO)
        • Rotary Vane
          • Mazda
        • Scroll, 6-CYL., 7-CYL. Or 10-CYL.
          • Acura & Honda
          • Audi
          • Jaguar
          • Land Rover
          • Lexus
          • Mazda (MPV)
          • Mercedes-Benz
          • Mitsubishi
          • Saab
          • Suzuki
          • Toyota
      • PANASONIC
        • Rotary Vane
          • Mazda (Millenia & Protege)
      • SANDEN
        • Notes
        • Scroll
          • Honda (Civic)
          • Mazda (626)
          • Mitsubishi
          • Saab
        • 7-Cylinder
          • Suzuki
      • SEIKO-SEIKI
        • Rotary Vane
          • Suzuki
      • ZEXEL
        • Rotary Vane
          • Honda (Passport) & Isuzu (Amigo, Rodeo & Vehi-CROSS)
          • Infiniti (G20) & Nissan
          • Subaru (Legacy)
        • 6-Cylinder
          • Audi
          • Volvo
    • Cabin Air Filter
      • Identification
        • Model Identification
      • Removal & Installation
        • Notes
        • Cabin Air Filter
          • Notes
          • Removal & Installation (1990-2002)
    • HVAC Systems - General Servicing
      • USING R-12 & R-134a REFRIGERANT
        • Handling/Safety Precautions
        • IDENTIFYING R-134a SYSTEMS & COMPONENTS
          • Notes
          • Fittings & "O" Rings
          • Underhood A/C Specification Labels
          • Other Means Of Identification
        • Refrigerant Oils
          • Notes
          • Acura
          • Audi
          • Honda
          • Hyundai
          • Infiniti & Nissan
          • Isuzu
          • Jaguar
          • Kia
          • Land Rover
          • Lexus & Toyota
          • Mazda
          • Mercedes-Benz
          • Mitsubishi
          • Saab
          • Subaru
          • Suzuki
          • Volkswagen
          • Volvo
        • Service Equipment
      • System Service Valves
        • SCHRADER-Type Valves
        • Service Valve Locations
      • Refrigerant Recovery/Recycling
  • HVAC Control Systems
    • Automatic A/C-Heater Systems
      • Diagnostic Trouble Code List
      • Specifications
      • Description
      • Operation
        • A/C Push Button Control Unit
          • Notes
          • Temperature Control
          • Air Recirculation Mode
          • EC (Economy) Mode
        • Blower Switch
        • On-Board Diagnostics With Malfunction Memory
        • Vacuum System
      • Programming
        • Version Coding
          • Notes
          • Checking Version Code
          • Programming Version Code
      • Trouble Shooting
        • Function Tests
          • Notes
          • Preparation For Function Test
          • Defrost Function Test
          • Ventilation In Cooling Mode Function Test
          • Normal Setting In Regulating Mode Function Test
          • Economy Not In Heating Mode Function Test
          • Economy In Heating Mode Function Test
          • Residual Engine Heat Utilization Function Test
      • Self-Diagnostics
        • Notes
        • Retrieving Diagnostic Trouble Codes
        • Connecting Test Equipment
        • Erasing Diagnostic Trouble Codes
      • Diagnostic Tests
        • DTC B1226: In-Vehicle Temperature Sensor
        • DTC B1227: Outside Temperature Sensor
        • DTC B1228: Left Heater Core Temperature Sensor
        • DTC B1230: Evaporator Temperature Sensor
        • DTC B1231: Engine Coolant Temperature Sensor
        • DTC B1232: Refrigerant Pressure Sensor
        • DTC B1233: Refrigerant Temperature Sensor
        • DTC B1241: Refrigerant Fill
        • DTC B1416: Coolant Circulation Pump
        • DTC B1417: Automatic A/C MONOVALVE
        • DTC B1419: A/C Compressor Clutch
        • DTC B1420: Idle Speed Increase
        • DTC B1421: Auxiliary Fan (Air) Control Module
        • DTC B1422: Serial Interface (K1)
        • DTC B1423: Switchover Valve Block
        • DTC B1452: Left Air Outlet Feedback Potentiometer
        • DTC B1453: Left Air Outlet Potentiometer
        • DTC B1454: Center Air Outlet Potentiometer
        • DTC B1457: Center Air Outlet Feedback Potentiometer
        • DTC B1458: Right Air Outlet Feedback Potentiometer
        • DTC B1459: Serial Interface (K2)
      • System Tests
        • Notes
        • Reading Actual Values
        • Vacuum Tests
          • Notes
          • Vacuum Distributor Block, Vacuum Reservoir & Switchover Valve Block Tests
          • Vacuum Actuator Circuit Test
        • Miscellaneous Electrical Tests
          • A/C Push Button Control Unit Voltage Output
          • A/C Push Button Control Unit Voltage Supply (Circuit 30)
          • Blower Regulator Control
          • Cold Function Indicator Light (Blue LED) Voltage
          • Cold Push Button Circuit Voltage
          • Diagnostic Output Voltage
          • Right Air Outlet Potentiometer
          • Soft Top Activation Voltage
          • Voltage Supply (Circuit 15)
          • Voltage Supply (Circuit 15x)
          • Warm Function Indicator Light (Red LED) Voltage
          • Warm Push Button Circuit Voltage
      • Removal & Installation
        • Notes
        • A/C-Heater Box
          • Removal & Installation
        • A/C Push Button Control Module
          • Notes
          • Removal & Installation
        • Air Control Module
        • Blower Motor
          • Removal & Installation
        • Evaporator
          • Removal & Installation
        • Evaporator Temperature Sensor
          • Removal & Installation
        • Heater Core
          • Removal & Installation
        • In-Vehicle Temperature Sensor
          • Notes
          • Removal & Installation
        • Refrigerant Pressure Sensor
        • Switchover Valve Block
          • Removal & Installation
      • Torque Specifications
      • Vacuum Hose Diagram(S)
      • Wiring Diagrams
    • Climate Control -- 129 Chassis
      • Diagnostic Trouble Code List
      • General Information
        • Notes on handling refrigerant R134a - AH83.30-N-0003-01A
        • Conduct if air conditioning system is damaged or leaking - AH83.30-N-0004-01A
        • Protect air conditioning circuit and components from moisture when carrying out repair work - AH83.30-N-0005-01A
      • Basic Knowledge
        • Automatic air conditioning (auto A/C), function - GF83.40-P-0001B
          • Notes
          • Air conditioning (Automatic) A/C, networking of components - GF83.40-P-0001-02A
        • Automatic air conditioning pushbutton control module position/function - GF83.40-P-2000C
        • Temperature control function - GF83.57-P-2000C
        • Stationary heater (STH), location of components - GF83.70-P-0006-03B
      • Safety Precautions
        • Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. - AS83.00-Z-0001-01A
        • Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit - AS83.70-Z-0002-01A
      • Self-Diagnostic System
        • Stationary heater (STH) diagnosis, advanced information - AD83.70-P-2001A
          • Notes
          • Coupling assignment, stationary heater unit - AD83.70-P-2001-01A
          • Stationary heater unit connector assignment - AD83.70-P-2001-01GH
          • Notes on diagnosis with Hand-Held Tester (HHT) on heater booster/stationary heater - AD83.70-P-2001-02A
          • Diagnostic tools, stationary heater/heater booster - AD83.70-P-2001-03A
        • Stationary heater (STH) diagnosis, function check - AD83.70-P-3003A
        • Stationary heater (STH) diagnosis, fault memory (B1000, B1800, B1801, B1802, B1803, B1810, B1811, B1820, B1821, B1823, B1824) - AD83.70-P-4002A
        • Stationary heater (STH) diagnosis, troubleshooting - AD83.70-P-5001A
        • Stationary heater test of electrical system - AD83.70-P-6001
          • Stationary heater test of electrical system heater unit voltage supply - AD83.70-P-6001-01A
          • Stationary heater/heater booster test of electrical system heater unit diagnostic cable - AD83.70-P-6001-02A
          • Stationary heater test of electrical system timer voltage supply - AD83.70-P-6001-03A
          • Stationary heater test of electrical system glow plug - AD83.70-P-6001-04A
          • Stationary heater test of electrical system glow plug - AD83.70-P-6001-04B
          • Stationary heater/heater booster test of electrical system fuel metering pump - AD83.70-P-6001-05A
          • Stationary heater/heater booster test of electrical system fuel metering pump - AD83.70-P-6001-05B
          • Stationary heater test of electrical system combustion air blower - AD83.70-P-6001-06A
          • Stationary heater test of electrical system combustion air - AD83.70-P-6001-06B
          • Stationary heater test of electrical system circulation pump - AD83.70-P-6001-07A
          • Stationary heater test of electrical system circulation pump - AD83.70-P-6001-07B
          • Stationary heater test of electrical system automatic air conditioning pushbutton control module actuation - AD83.70-P-6001-08A
          • Stationary heater test of electrical system vehicle heater blower motor - AD83.70-P-6001-09A
        • Fuel metering pump delivery quantity, testing fuel delivery of stationary heater - AD83.70-P-7000
          • Fuel metering pump delivery quantity, testing fuel delivery of stationary heater - AD83.70-P-7000-01A
          • Fuel metering pump leaks, testing fuel delivery of stationary heater/heater booster - AD83.70-P-7000-02A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Climate control - AR83.00-Z-9113AB
        • Testing and repair work: Passenger cars: Climate control - AR83.00-Z-9129AA
        • Correcting oil level in air conditioning following repair or slow refrigerant loss - AR83.30-P-5251C
        • Correcting oil level in air conditioning after replacing parts - AR83.30-P-5252C
        • Correcting oil level in air conditioning after system suddenly loses all refrigerant - AR83.30-P-5253C
        • Removing and installing auxiliary fan series resistor - AR83.30-P-5370C
        • Removing and installing refrigerant pressure sensor - AR83.30-P-5430C
        • Check evaporator for leakage - AR83.30-P-5550A
        • Removing and installing liquid tank - AR83.30-P-6520C
        • Removing and installing pushbutton control module - AR83.40-P-6350C
        • Replacing bulbs on pushbutton control module for air conditioning (automatic) - AR83.40-P-6352F
        • Removing and installing auxiliary fan - AR83.40-P-6360C
        • Removing and installing A/C compressor - AR83.55-P-5300C
        • Check emission level, adjust if necessary - AR83.70-P-1177C
          • Notes
          • Checking emission level with gas trace instrument - AR83.70-P-1177-01C
          • Checking emission level with carbon dioxide tester - AR83.70-P-1177-02C
        • Removing and installing stationary heater - AR83.70-P-5302C
          • Notes
          • Bleeding coolant circuit after installing stationary heater - AR83.70-P-5302-01C
        • Remove/install combustion air blower unit - AR83.70-P-5555C
        • Removing and installing fuel metering pump - AR83.70-P-5652C
        • Removing and installing coolant circulation pump - AR83.70-P-5700C
        • Remove/install burner insert - AR83.70-P-5772C
        • Removing and installing timer - AR83.70-P-5892C
        • Remove/install control unit/heat exchanger unit - AR83.70-P-5935C
        • Removing and installing check valve - AR83.70-P-6015C
        • Removing and installing thermostat in coolant circuit - AR83.70-P-6016C
      • Repair & Adjustments
        • Removal, reinstallation of air inlet cover - RA83001240140X(83-140)
        • Removing and installing heater box (air conditioning system) - RA83001290100X(83-100)
        • Removing and installing heat exchanger - RA83001290110X(83-110)
        • Removing and installing control unit (pushbutton control module) up to 05/96 - RA83001290112X(83-112)
        • Removing and installing control system for center and side nozzles - RA83001290116X(83-116)
        • Removing and installing blower motor - RA83001290120X(83-120)
        • Removing and installing electronic blower controller - RA83001290125X(83-125)
        • Removing and installing, testing interior air temperature sensor with fresh air blower - RA83001290130X(83-130)
        • Removing and installing, testing heat exchanger temperature sensor - RA83001290135X(83-135)
        • Removing and installing, testing outside air temperature sensor up to 05/96 - RA83001290137X(83-137)
        • Removing and installing valve strip - RA83001290138X(83-138)
        • Functional description - RA83001290400X(83-0400)
        • Arrangement of components - RA83001290401X(83-0401)
        • Function of coolant circuit with diagram - RA83001290402X(83-0402)
        • Information for troubleshooting - RA83001290403X(83-0403)
        • Testing vacuum system, automatic heater control, automatic air conditioning temperature control, automatic air conditioning control up to 05/96 - RA83001290520X(83-520)
        • Removing and installing refrigerant compressor - RA83001290530X(83-530)
        • Removing and installing speed sensor on refrigerant compressor - RA83001290532X(83-532)
        • Removing and installing electro-magnetic clutch, testing solenoid coil (refrigerant compressor 10 PA 17) - RA83001290536X(83-536)
        • Removing and installing preresistor for auxiliary fan up to 12/93 - RA83001290537X(83-537)
        • Removing and installing condenser - RA83001290538X(83-538)
        • Removing and installing fluid reservoir up to 05/96 - RA83001290540X(83-540)
        • Testing, removing and installing pressure switch for refrigerant compressor in fluid reservoir up to 05/96 - RA83001290542X(83-542)
        • Testing, removing and installing pressure switch for auxiliary fan in fluid reservoir - RA83001290544X(83-544)
        • Removing and installing, testing evaporator temperature sensor - RA83001290546X(83-546)
        • Removing and installing expansion valve - RA83001290552X(83-552)
        • Removing and installing evaporator - RA83001290554X(83-554)
        • Removing and installing auxiliary fan - RA83001290560X(83-560)
        • Removing and installing vacuum elements - RA83001290665X(83-665)
        • Checking function of auxiliary heater - RA83001291085X(83-1085)
        • Checking glow - RA83001291098X(83-1098)
        • Checking fuel delivery quantity of fuel metering pump - RA83001291108X(83-1108)
        • Checking combustion air blower - RA83001291121X(83-1121)
        • Checking function of fuel metering pump - RA83001291122X(83-1122)
        • Checking flame control (after function test 83-1085) - RA83001291125X(83-1125)
        • Checking timer - RA83001291130X(83-1130)
        • Checking temperature sensor - RA83001291132X(83-1132)
        • Checking thermal fuse - RA83001291133X(83-1133)
        • Checking circulating pump - RA83001291135X(83-1135)
        • Checking resistor for combustion air blower - RA83001291138X(83-1138)
        • Bleeding coolant circuit - RA83001291165X(83-1165)
        • Checking and adjusting emission value (CO ) - RA83001291177X(83-1177)
        • Removing and installing heater with holder - RA83001295302X(83-5302)
        • Removing and installing combustion air blower - RA83001295557X(83-5557)
        • Removing and installing fuel metering pump - RA83001295652X(83-5652)
        • Removing and installing flame control - RA83001295742X(83-5742)
        • Removing and installing glow plug - RA83001295757X(83-5757)
        • Replacing ceramic web - RA83001295772X(83-5772)
        • Removing and installing check valve - RA83001295842X(83-5842)
        • Removing and installing timer - RA83001295892X(83-5892)
        • Removing and installing control unit - RA83001295935X(83-5935)
        • Removing and installing temperature sensor - RA83001295977X(83-5977)
        • Removing and installing thermal fuse - RA83001295982X(83-5982)
        • Removing and installing thermostat - RA83001296002X(83-6002)
        • Removing and installing circulating pump - RA83001296022X(83-6022)
        • Removing and installing resistor for combustion air blower - RA83001296055X(83-6055)
        • Technical modifications - RA83SH129TA00X
• Maintenance
  • Maintenance Reminder Light (Reset Procedures)
    • Maintenance Service Reminder (FSS)
      • Notes
      • Maintenance Service Reminder Reset - Button Identification
      • Maintenance Service Reminder Reset - Procedure 01
      • Maintenance Service Reminder Reset - Procedure 02
      • Maintenance Service Reminder Reset - Procedure 03
      • Maintenance Service Reminder Reset - Procedure 04
      • Maintenance Service Reminder Reset - Procedure 05
      • Maintenance Service Reminder Reset - Procedure 06
      • Maintenance Service Reminder Reset - Procedure 07
      • Maintenance Service Reminder Reset - Procedure 08
      • Maintenance Service Reminder Reset - Procedure 09
    • Maintenance Service Reminder (Service Indicator)
      • Notes
      • Maintenance Service Reminder Reset - Procedure 01
        • Notes
        • AP00.20-P-0042GZ
      • Maintenance Service Reminder Reset - Procedure 02
        • Notes
        • AP00.20-P-0042V
      • Maintenance Service Reminder Reset - Procedure 03
        • Notes
        • AP00.20-P-0042SLR
      • Maintenance Service Reminder Reset - Procedure 04
        • Notes
        • AP00.20-P-0042PIT
      • Maintenance Service Reminder Reset - Procedure 05
        • Notes
        • With Comfort Multifunction Steering Wheel (12 Buttons) - AP00.20-P-0042CV
        • With Multifunction Steering Wheel (4 Buttons) - AP00.20-P-0042CW
      • Maintenance Service Reminder Reset - Procedure 06
        • Notes
        • AP00.20-P-0042EW
      • Maintenance Service Reminder Reset - Procedure 08
        • Notes
        • AP00.20-P-0042TA
      • Maintenance Service Reminder Reset - Procedure 09
        • Notes
        • AP00.20-P-0042M
      • Maintenance Service Reminder Reset - Procedure 10
        • Notes
        • Reset Service Indicator - AP00.20-P-0042SX
        • Add / Deselect Service Item - AP00.20-P-0042-02SX
        • Reset Complete Service - AP00.20-P-0042-01SX
        • Reset Individual Service - AP00.20-P-0042-01SY
      • Maintenance Service Reminder Reset - Procedure 11
        • Notes
        • AP00.20-P-0042TX
      • Maintenance Service Reminder Reset - Procedure 12
        • Notes
        • AP00.20-P-0042RT
      • Maintenance Service Reminder Reset - Procedure 13
        • Notes
        • AP00.20-P-0042GP
      • Maintenance Service Reminder Reset - Procedure 14
        • Notes
        • AP00.20-P-0042GG (2008-2011)
        • AP00.20-P-0042GA (2012-)
      • Maintenance Service Reminder Reset - Procedure 15
      • Maintenance Service Reminder Reset - Procedure 16
        • Notes
        • AP00.20-D-0040-01HA - Without Multifunction Steering Wheel
        • AP00.20-D-0040-01HB - With Multifunction Steering Wheel (CODE CL4)
      • Maintenance Service Reminder Reset - Procedure 17
      • Maintenance Service Reminder Reset - Procedure 18
        • Notes
        • AP00.20-P-0043HA
      • Maintenance Service Reminder Reset - Procedure 19
        • Notes
        • AP00.20-P-0043E
      • Maintenance Service Reminder Reset - Procedure 20
        • Notes
        • AP00.20-S-0040EB
      • Maintenance Service Reminder Reset - Procedure 21
        • Notes
        • AP00.20-P-0043J
    • Maintenance Service Reminder (Service Reminder)
      • Notes
      • Maintenance Service Reminder Reset Procedure
    • Emissions Maintenance Reminder
      • Notes
      • Emissions Maintenance Reminder Reset Procedure
    • Tire Pressure Monitor System Reminder
      • Notes
      • TPMS Reminder Reset - Procedure 01
        • Notes
        • Vehicle Manufacture Date Up To 9/30/00
        • Vehicle Manufacture Date 10/1/00 To 5/31/01
        • Manufacture Date After 5/31/01
      • TPMS Reminder Reset - Procedure 02
      • TPMS Reminder Reset - Procedure 03
      • TPMS Reminder Reset - Procedure 04
      • TPMS Reminder Reset - Procedure 05
        • Notes
        • Models With Body 210
        • Models With Body 211
      • TPMS Reminder Reset - Procedure 06
      • TPMS Reminder Reset - Procedure 07
      • TPMS Reminder Reset - Procedure 08
      • TPMS Reminder Reset - Procedure 09
      • TPMS Reminder Reset - Procedure 10
      • TPMS Reminder Reset - Procedure 11
      • TPMS Reminder Reset - Procedure 13
      • TPMS Reminder Reset - Procedure 14
      • TPMS Reminder Reset - Procedure 15
        • Notes
        • Restarting The Tire Pressure Monitor (Direct TPMS)
        • Restarting The Tire Pressure Loss Warning System (Indirect TPMS)
      • TPMS Reminder Reset - Procedure 16
      • TPMS Reminder Reset - Procedure 17
      • TPMS Reminder Reset - Procedure 18
        • Notes
        • Vehicles Without Multifunction Steering Wheel Controls
        • Vehicles With Multifunction Steering Wheel Controls
      • TPMS Reminder Reset - Procedure 19
        • Notes
        • Vehicles With Steering Wheel Buttons
        • Vehicles Without Steering Wheel Buttons
      • TPMS Reminder Reset - Procedure 20
• Restraints
  • Air Bag, SRS
    • Air Bag Restraint Systems
      • Description & Operation
      • Component Locations
      • Servicing
      • System Operation Check
      • Air Bag Safety Precautions
      • Adjustments
      • Disabling & Activating Air Bag System
        • Disabling System
        • Activating System
      • Disposal Procedures
        • Notes
        • Deployed Air Bag Or ETR
        • Scrapped Vehicle
        • UNDEPLOYED Air Bag-ETR
      • Post-Collision Inspection
      • Removal & Installation
        • Notes
        • CLOCKSPRING Assembly
          • Removal & Installation
        • Control Module
          • Removal & Installation Class
          • Removal & Installation Sl Class
          • Removal & Installation Clk & Slk
        • Driver-Side Air Bag Module
          • Notes
          • Removal & Installation
        • Side Air Bag Unit (Driver-Side & Passenger-Side)
          • Removal & Installation
        • Side Air Bag Sensor (Driver-Side & Passenger-Side)
          • Removal & Installation
        • Occupied Seat Recognition Sensor
          • Removal & Installation
        • Passenger-Side Air Bag Module
          • Removal & Installation Class
          • Removal & Installation Sl Class
          • Removal & Installation Clk
          • Removal & Installation Slk
      • Diagnostics
        • Notes
        • Retrieving Fault Codes
        • Diagnostic Trouble Code List
        • Clearing Fault Codes
        • Understanding Diagnostic Chart Information
          • Notes
          • SRS & ETR Diagnosis Chart Column Identification
          • Using SRS & ETR Diagnosis Chart
        • Control Module Programming
          • Notes
          • Vehicles Without Side AIR Bag
          • Vehicles With Side AIR Bag
          • Parameters
      • Diagnostic Tests
        • Except E Class
          • SRS & ETR Diagnosis Tests 1.0-3.1
          • SRS & ETR Diagnosis Tests 3.2-3.4
          • SRS & ETR Diagnosis Tests 4.0-5.1
          • SRS & ETR Diagnosis Tests 5.2-7.0
          • SRS & ETR Diagnosis Tests 7.1-8.0
          • SRS & ETR Diagnosis Tests 9.0-9.2
          • SRS & ETR Diagnosis Tests 9.3-10.0
          • SRS & ETR Diagnosis Tests 11.0-12.1
          • SRS & ETR Diagnosis Tests 13.0-13.1
          • SRS & ETR Diagnosis Tests 14.0-15.0
          • SRS & ETR Diagnosis Tests 15.1-15.3
          • SRS & ETR Diagnosis Tests 15.4-16.1
          • SRS & ETR Diagnosis Tests 16.2-17.1
          • SRS & ETR Diagnosis Tests 17.2-18.0
          • SRS & ETR Diagnosis Tests 18.1-19.1
          • SRS & ETR Diagnosis Tests 19.2-20.1
          • SRS & ETR Diagnosis Tests 21.0-22.1
        • E Class
          • SRS & ETR Diagnosis Tests 1.0-2.1
          • SRS & ETR Diagnosis Tests 3.0-3.2
          • SRS & ETR Diagnosis Tests 3.3-5.0
          • SRS & ETR Diagnosis Tests 5.1-6.0
          • SRS & ETR Diagnosis Tests 7.0-7.3
          • SRS & ETR Diagnosis Tests 8.0-9.2
          • SRS & ETR Diagnosis Tests 9.3-11.0
          • SRS & ETR Diagnosis Tests 11.1-11.3
          • SRS & ETR Diagnosis Tests 12.0-13.1
          • SRS & ETR Diagnosis Tests 13.2-14.0
          • SRS & ETR Diagnosis Tests 15.0-15.2
          • SRS & ETR Diagnosis Tests 16.0-16.2
          • SRS & ETR Diagnosis Tests 17.0-18.0
          • SRS & ETR Diagnosis Tests 19.0-20.0
          • SRS & ETR Diagnosis Tests 21.0-21.2
          • SRS & ETR Diagnosis Tests 22.0-22.2
          • SRS & ETR Diagnosis Tests 23.0-24.0
          • SRS & ETR Diagnosis Tests 25.0-26.0
          • SRS & ETR Diagnosis Tests 27.0-28.0
          • SRS & ETR Diagnosis Tests 29.0-30.0
          • SRS & ETR Diagnosis Tests 31.0-31.2
          • SRS & ETR Diagnosis Tests 32.0-33.1
          • SRS & ETR Diagnosis Tests 33.2-36.0
        • Connecting Test Equipment
      • Wire Repair
      • Torque Specifications
      • Wiring Diagrams
    • Air Bag/SRS Component Inspection & Replacement Tables - EUROPEAN
      • ALFA Romeo (1991-95)
      • AUDI (1989-04)
      • BMW (1986-04)
      • Jaguar (1990-04)
      • Land Rover (1995-04)
      • MERCEDES-BENZ (1986-04)
      • Mini (2002-04)
      • PORSCHE (1987-04)
      • SAAB (1989-04)
      • VOLKSWAGEN (1990-04)
      • VOLVO (1987-04)
    • Seats, Restraint Systems -- 129 Chassis
      • General Information
        • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002
          • Important instructions for performing repair, body and welding work on vehicles with airbags and emergency tensioning retractors - AH91.00-P-0002-01A
          • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002-01B
        • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006
          • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006-01A
          • Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B
      • User Information
        • Confirmation for deactivation of airbag - OV91.60-P-0001-01A
      • Basic Knowledge
        • Electric seat adjustment (ESA), function - GF91.29-P-0004AA
        • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02A
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02B
        • Front emergency tensioning retractor, function - GF91.40-P-4000
          • Front emergency tensioning retractor, design - GF91.40-P-4000-02A
          • Front emergency tensioning retractor, function - GF91.40-P-4000-03A
        • Triggering mechanism of supplemental restraint system (SRS) - GF91.60-P-0002-08F
      • Safety Precautions
        • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001
          • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01A
          • Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Seats, bunks, restraint systems - AR91.00-Z-9129AA
        • Removing and installing control valve for multi-contour seat - AR91.25-P-1710C
        • Removing and installing air cushions in multi-contour backrest - AR91.25-P-1740C
        • Removing and installing multi-contour seat air cushions - AR91.25-P-1770C
        • Removing and installing drive for horizontal seat adjustment - AR91.29-P-1300A
        • Removing and installing drive for seat height adjustment - AR91.29-P-1421
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421A
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421B
        • Removing and installing front seat backrest motor - AR91.29-P-1431A
        • Removing and installing front seat head restraint motor - AR91.29-P-1432A
        • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001G
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001H
        • Reactivating passenger airbag after deactivation - AR91.60-P-0002
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002G
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002H
        • Removing and installing front passenger seat occupied recognition sensor - AR91.60-P-0720C
      • Repair & Adjustments
        • (91-830)
          • Testing function of roll-over bar - RA91001240830X(91-830)
          • Testing roll-over bar for proper function - RA91001290830X(91-830)
        • (91-860)
          • Removal and installation of left and right rear axle switches - RA91001240860X(91-860)
          • Removing and installing left and right rear axle switches up to 05/95 - RA91001290860X(91-860)
        • Function description, front seats - RA91001290010X(91-010)
        • Removing and installing front seat head restraints - RA91001290052X(91-052)
        • Removing and installing adjustment mechanism for head restraint and upper belt guide fitting - RA91001290053X(91-053)
        • Removing and installing front seat cushion and backrest cushion - RA91001290055X(91-055)
        • Converting mount at front of front seat cushion - RA91001290057X(91-057)
        • Removing and installing covering on side of backrest frame - RA91001290060X(91-060)
        • Removing and installing covering on rear of front seat backrest - RA91001290065X(91-065)
        • Removing and installing side covering on outside of seat cushion frame - RA91001290070X(91-070)
        • Removing and installing cover on upper belt guide fitting - RA91001290075X(91-075)
        • Removing and installing front seat - RA91001290100X(91-100)
        • Removing and installing seat rail - RA91001290120X(91-120)
        • Removing and installing gear with spindle for forward/backward seat adjustment mechanism - RA91001290122X(91-122)
        • Removing and installing gear for seat height adjustment, front - RA91001290123X(91-123)
        • Removing and installing gear for seat height adjustment, rear - RA91001290124X(91-124)
        • Removing and installing gear for backrest adjustment - RA91001290125X(91-125)
        • Removing and installing backrest lock on front seat - RA91001290130X(91-130)
        • Repairing damaged female threads on seat frame - RA91001290140X(91-140)
        • Checking front seat frame following accident - RA91001290151X(91-151)
        • Removing and installing control cables for backrest lock - RA91001290155X(91-155)
        • Removing and installing cover on front seat cushion - RA91001290180X(91-180)
        • Removing and installing cover on front seat backrest cushion - RA91001290182X(91-182)
        • Removing and installing rear seat - RA91001290200X(91-200)
        • Removing and installing emergency tensioning retractors - RA91001290502X(91-502)
        • Seat belt replacement regulations - RA91001290550X(91-550)
        • Removing and installing ETR control module or ETR with airbag control module - RA91001290622X(91-622)
        • Instructions for replacing seat belts - RA91001290625X(91-625)
        • Removing and installing emergency tensioning retractor (ETR) - RA91001290630X(91-630)
        • Removing and installing airbag unit in steering wheel - RA91001290660X(91-660)
        • Removing and installing side airbag unit - RA91001290690X(91-690)
        • Removing and installing side airbag sensor - RA91001290710X(91-710)
        • Function description of roll-over bar - RA91001290800X(91-800)
        • Safety regulations for roll-over bars - RA91001290820X(91-820)
        • Removing and installing roll-over bar crash actuated trigger module up to 05/95 - RA91001290840X(91-840)
        • Removing and installing soft top control module - RA91001290841X(91-841)
        • Removing and installing roll-over bar convenience switch - RA91001290880X(91-880)
        • Removing and installing roll-over bar - RA91001290900X(91-900)
        • Adjusting roll-over bar - RA91001290920X(91-920)
        • Description of operation of airbag with ETR and side airbag - RA9100129A600X(91-600)
        • Safety precautions for airbag, side airbag and emergency tensioning retractor - RA9100129A610X(91-610)
          • Notes
          • A: General
          • B. Shipping airbag, side airbag and emergency tensioning retractor units
          • C. Storing airbag, side airbag and emergency tensioning retractor units
          • D. Installation and removal of airbag, side airbag and emergency tensioning retractor units
          • E. Rendering airbag, side airbag and ETR units unusable
          • F. Disposing of faulty components of restraint system
          • G. Important instructions for performing repair, body and welding work
        • Removing, installing passenger airbag unit - RA9100129A680X(91-680)
          • Passenger airbag unit (up to approx. 08/95)
          • B. Passenger airbag unit (as of approx. 09/95)
        • Technical modifications, group 91 - RA9100129TA00X
        • Technical modifications, group 91 - RA9100129TA01X
      • Component Modifications
        • Discontinuation of control module and rear axle switch (roll bar) - BT91.59-P-0001-01A
  • Restraints Control Systems
    • Seats, Restraint Systems -- 129 Chassis
      • General Information
        • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002
          • Important instructions for performing repair, body and welding work on vehicles with airbags and emergency tensioning retractors - AH91.00-P-0002-01A
          • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002-01B
        • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006
          • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006-01A
          • Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B
      • User Information
        • Confirmation for deactivation of airbag - OV91.60-P-0001-01A
      • Basic Knowledge
        • Electric seat adjustment (ESA), function - GF91.29-P-0004AA
        • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02A
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02B
        • Front emergency tensioning retractor, function - GF91.40-P-4000
          • Front emergency tensioning retractor, design - GF91.40-P-4000-02A
          • Front emergency tensioning retractor, function - GF91.40-P-4000-03A
        • Triggering mechanism of supplemental restraint system (SRS) - GF91.60-P-0002-08F
      • Safety Precautions
        • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001
          • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01A
          • Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Seats, bunks, restraint systems - AR91.00-Z-9129AA
        • Removing and installing control valve for multi-contour seat - AR91.25-P-1710C
        • Removing and installing air cushions in multi-contour backrest - AR91.25-P-1740C
        • Removing and installing multi-contour seat air cushions - AR91.25-P-1770C
        • Removing and installing drive for horizontal seat adjustment - AR91.29-P-1300A
        • Removing and installing drive for seat height adjustment - AR91.29-P-1421
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421A
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421B
        • Removing and installing front seat backrest motor - AR91.29-P-1431A
        • Removing and installing front seat head restraint motor - AR91.29-P-1432A
        • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001G
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001H
        • Reactivating passenger airbag after deactivation - AR91.60-P-0002
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002G
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002H
        • Removing and installing front passenger seat occupied recognition sensor - AR91.60-P-0720C
      • Repair & Adjustments
        • (91-830)
          • Testing function of roll-over bar - RA91001240830X(91-830)
          • Testing roll-over bar for proper function - RA91001290830X(91-830)
        • (91-860)
          • Removal and installation of left and right rear axle switches - RA91001240860X(91-860)
          • Removing and installing left and right rear axle switches up to 05/95 - RA91001290860X(91-860)
        • Function description, front seats - RA91001290010X(91-010)
        • Removing and installing front seat head restraints - RA91001290052X(91-052)
        • Removing and installing adjustment mechanism for head restraint and upper belt guide fitting - RA91001290053X(91-053)
        • Removing and installing front seat cushion and backrest cushion - RA91001290055X(91-055)
        • Converting mount at front of front seat cushion - RA91001290057X(91-057)
        • Removing and installing covering on side of backrest frame - RA91001290060X(91-060)
        • Removing and installing covering on rear of front seat backrest - RA91001290065X(91-065)
        • Removing and installing side covering on outside of seat cushion frame - RA91001290070X(91-070)
        • Removing and installing cover on upper belt guide fitting - RA91001290075X(91-075)
        • Removing and installing front seat - RA91001290100X(91-100)
        • Removing and installing seat rail - RA91001290120X(91-120)
        • Removing and installing gear with spindle for forward/backward seat adjustment mechanism - RA91001290122X(91-122)
        • Removing and installing gear for seat height adjustment, front - RA91001290123X(91-123)
        • Removing and installing gear for seat height adjustment, rear - RA91001290124X(91-124)
        • Removing and installing gear for backrest adjustment - RA91001290125X(91-125)
        • Removing and installing backrest lock on front seat - RA91001290130X(91-130)
        • Repairing damaged female threads on seat frame - RA91001290140X(91-140)
        • Checking front seat frame following accident - RA91001290151X(91-151)
        • Removing and installing control cables for backrest lock - RA91001290155X(91-155)
        • Removing and installing cover on front seat cushion - RA91001290180X(91-180)
        • Removing and installing cover on front seat backrest cushion - RA91001290182X(91-182)
        • Removing and installing rear seat - RA91001290200X(91-200)
        • Removing and installing emergency tensioning retractors - RA91001290502X(91-502)
        • Seat belt replacement regulations - RA91001290550X(91-550)
        • Removing and installing ETR control module or ETR with airbag control module - RA91001290622X(91-622)
        • Instructions for replacing seat belts - RA91001290625X(91-625)
        • Removing and installing emergency tensioning retractor (ETR) - RA91001290630X(91-630)
        • Removing and installing airbag unit in steering wheel - RA91001290660X(91-660)
        • Removing and installing side airbag unit - RA91001290690X(91-690)
        • Removing and installing side airbag sensor - RA91001290710X(91-710)
        • Function description of roll-over bar - RA91001290800X(91-800)
        • Safety regulations for roll-over bars - RA91001290820X(91-820)
        • Removing and installing roll-over bar crash actuated trigger module up to 05/95 - RA91001290840X(91-840)
        • Removing and installing soft top control module - RA91001290841X(91-841)
        • Removing and installing roll-over bar convenience switch - RA91001290880X(91-880)
        • Removing and installing roll-over bar - RA91001290900X(91-900)
        • Adjusting roll-over bar - RA91001290920X(91-920)
        • Description of operation of airbag with ETR and side airbag - RA9100129A600X(91-600)
        • Safety precautions for airbag, side airbag and emergency tensioning retractor - RA9100129A610X(91-610)
          • Notes
          • A: General
          • B. Shipping airbag, side airbag and emergency tensioning retractor units
          • C. Storing airbag, side airbag and emergency tensioning retractor units
          • D. Installation and removal of airbag, side airbag and emergency tensioning retractor units
          • E. Rendering airbag, side airbag and ETR units unusable
          • F. Disposing of faulty components of restraint system
          • G. Important instructions for performing repair, body and welding work
        • Removing, installing passenger airbag unit - RA9100129A680X(91-680)
          • Passenger airbag unit (up to approx. 08/95)
          • B. Passenger airbag unit (as of approx. 09/95)
        • Technical modifications, group 91 - RA9100129TA00X
        • Technical modifications, group 91 - RA9100129TA01X
      • Component Modifications
        • Discontinuation of control module and rear axle switch (roll bar) - BT91.59-P-0001-01A
  • Seat Belts
    • Seats, Restraint Systems -- 129 Chassis
      • General Information
        • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002
          • Important instructions for performing repair, body and welding work on vehicles with airbags and emergency tensioning retractors - AH91.00-P-0002-01A
          • Notes on performing repair, body work and welding on vehicles with airbags and ETR units - AH91.00-P-0002-01B
        • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006
          • Evaluation of airbags and emergency tensioning retractors on accident vehicles - AH91.00-P-0006-01A
          • Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B
      • User Information
        • Confirmation for deactivation of airbag - OV91.60-P-0001-01A
      • Basic Knowledge
        • Electric seat adjustment (ESA), function - GF91.29-P-0004AA
        • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02A
          • Purpose of control module for front seat adjustment with memory - GF91.29-P-2102-02B
        • Front emergency tensioning retractor, function - GF91.40-P-4000
          • Front emergency tensioning retractor, design - GF91.40-P-4000-02A
          • Front emergency tensioning retractor, function - GF91.40-P-4000-03A
        • Triggering mechanism of supplemental restraint system (SRS) - GF91.60-P-0002-08F
      • Safety Precautions
        • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001
          • Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01A
          • Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. - AS91.00-Z-0001-01B
      • Testing & Repair
        • Testing and repair work: Passenger cars: Seats, bunks, restraint systems - AR91.00-Z-9129AA
        • Removing and installing control valve for multi-contour seat - AR91.25-P-1710C
        • Removing and installing air cushions in multi-contour backrest - AR91.25-P-1740C
        • Removing and installing multi-contour seat air cushions - AR91.25-P-1770C
        • Removing and installing drive for horizontal seat adjustment - AR91.29-P-1300A
        • Removing and installing drive for seat height adjustment - AR91.29-P-1421
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421A
          • Removing and installing drive for seat height adjustment - AR91.29-P-1421B
        • Removing and installing front seat backrest motor - AR91.29-P-1431A
        • Removing and installing front seat head restraint motor - AR91.29-P-1432A
        • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001G
          • Deactivating passenger airbag when using a reboard child seat - AR91.60-P-0001H
        • Reactivating passenger airbag after deactivation - AR91.60-P-0002
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002G
          • Reactivating passenger airbag after deactivation - AR91.60-P-0002H
        • Removing and installing front passenger seat occupied recognition sensor - AR91.60-P-0720C
      • Repair & Adjustments
        • (91-830)
          • Testing function of roll-over bar - RA91001240830X(91-830)
          • Testing roll-over bar for proper function - RA91001290830X(91-830)
        • (91-860)
          • Removal and installation of left and right rear axle switches - RA91001240860X(91-860)
          • Removing and installing left and right rear axle switches up to 05/95 - RA91001290860X(91-860)
        • Function description, front seats - RA91001290010X(91-010)
        • Removing and installing front seat head restraints - RA91001290052X(91-052)
        • Removing and installing adjustment mechanism for head restraint and upper belt guide fitting - RA91001290053X(91-053)
        • Removing and installing front seat cushion and backrest cushion - RA91001290055X(91-055)
        • Converting mount at front of front seat cushion - RA91001290057X(91-057)
        • Removing and installing covering on side of backrest frame - RA91001290060X(91-060)
        • Removing and installing covering on rear of front seat backrest - RA91001290065X(91-065)
        • Removing and installing side covering on outside of seat cushion frame - RA91001290070X(91-070)
        • Removing and installing cover on upper belt guide fitting - RA91001290075X(91-075)
        • Removing and installing front seat - RA91001290100X(91-100)
        • Removing and installing seat rail - RA91001290120X(91-120)
        • Removing and installing gear with spindle for forward/backward seat adjustment mechanism - RA91001290122X(91-122)
        • Removing and installing gear for seat height adjustment, front - RA91001290123X(91-123)
        • Removing and installing gear for seat height adjustment, rear - RA91001290124X(91-124)
        • Removing and installing gear for backrest adjustment - RA91001290125X(91-125)
        • Removing and installing backrest lock on front seat - RA91001290130X(91-130)
        • Repairing damaged female threads on seat frame - RA91001290140X(91-140)
        • Checking front seat frame following accident - RA91001290151X(91-151)
        • Removing and installing control cables for backrest lock - RA91001290155X(91-155)
        • Removing and installing cover on front seat cushion - RA91001290180X(91-180)
        • Removing and installing cover on front seat backrest cushion - RA91001290182X(91-182)
        • Removing and installing rear seat - RA91001290200X(91-200)
        • Removing and installing emergency tensioning retractors - RA91001290502X(91-502)
        • Seat belt replacement regulations - RA91001290550X(91-550)
        • Removing and installing ETR control module or ETR with airbag control module - RA91001290622X(91-622)
        • Instructions for replacing seat belts - RA91001290625X(91-625)
        • Removing and installing emergency tensioning retractor (ETR) - RA91001290630X(91-630)
        • Removing and installing airbag unit in steering wheel - RA91001290660X(91-660)
        • Removing and installing side airbag unit - RA91001290690X(91-690)
        • Removing and installing side airbag sensor - RA91001290710X(91-710)
        • Function description of roll-over bar - RA91001290800X(91-800)
        • Safety regulations for roll-over bars - RA91001290820X(91-820)
        • Removing and installing roll-over bar crash actuated trigger module up to 05/95 - RA91001290840X(91-840)
        • Removing and installing soft top control module - RA91001290841X(91-841)
        • Removing and installing roll-over bar convenience switch - RA91001290880X(91-880)
        • Removing and installing roll-over bar - RA91001290900X(91-900)
        • Adjusting roll-over bar - RA91001290920X(91-920)
        • Description of operation of airbag with ETR and side airbag - RA9100129A600X(91-600)
        • Safety precautions for airbag, side airbag and emergency tensioning retractor - RA9100129A610X(91-610)
          • Notes
          • A: General
          • B. Shipping airbag, side airbag and emergency tensioning retractor units
          • C. Storing airbag, side airbag and emergency tensioning retractor units
          • D. Installation and removal of airbag, side airbag and emergency tensioning retractor units
          • E. Rendering airbag, side airbag and ETR units unusable
          • F. Disposing of faulty components of restraint system
          • G. Important instructions for performing repair, body and welding work
        • Removing, installing passenger airbag unit - RA9100129A680X(91-680)
          • Passenger airbag unit (up to approx. 08/95)
          • B. Passenger airbag unit (as of approx. 09/95)
        • Technical modifications, group 91 - RA9100129TA00X
        • Technical modifications, group 91 - RA9100129TA01X
      • Component Modifications
        • Discontinuation of control module and rear axle switch (roll bar) - BT91.59-P-0001-01A
• Steering
  • Electronic Steering
    • Electronic Power Steering - 129, 140 & 210 Chassis
      • Model Identification
      • Production Date Information
      • Description & Operation
        • Notes
        • Parameter Steering
        • PML Electronic Control Unit
          • Notes
          • Voltage Supply
          • Fault Memory
          • Speed Performance Map Control
          • Safety Circuit & Monitoring Devices
        • Parameter Steering Valve (All Models)
        • Speed Recording
        • Design & Function Of Speed Sensors
        • Design & Function Of Road Speed Sensor
      • Component Locations
        • Component Locations (129 Chassis)
        • Component Locations (140 Chassis)
        • Component Locations (210 Chassis)
      • Using Diagnostic Charts
      • Programming
        • Notes
        • Activating Steering Angle Sensor
      • Trouble Shooting
        • Notes
        • Function Test
        • Symptom Index
      • Self-Diagnostic System (Section 11)
        • Retrieving Diagnostic Trouble Codes
          • Notes
          • Reading Diagnostic Trouble Code Memory
          • Clearing Diagnostic Trouble Codes
        • Diagnostic Trouble Code Definitions
      • System Tests
        • Notes
        • Preparation For Tests (Section 22)
        • Connecting Test Equipment
        • Electronic Stability Program (Esp) & Speed Sensitive Power Steering (SPS) Electrical Tests Program (Section 23)
          • Test Step 1.0-1.2
          • Test Step 2.0-5.0
          • Test Step 6.0-8.0
          • Test Step 8.1-11.1
          • Test Step 12.0-13.2
          • Test Step 14.0-15.2
          • Test Step 16.0-17.2
          • Test Step 18.0-19.2
          • Test Step 20.0-22.0
          • Test Step 23.0-23.3
          • Test Step 23.4-23.7
          • Test Step 23.8-24.2
          • Test Step 24.3-26.0
          • Test Step 26.1-28.0
          • Test Step 28.1-29.2
          • Test Step 30.0-30.2
      • Removal & Installation
        • Notes
        • Parameter Steering Valve (All Models)
      • Connector Identification
      • Special Tools
    • Electronic Power Steering - 129, 202, 208 & 210 Chassis (With Esp, BAS & SPS)
      • Model Identification
      • Production Date Information
      • Description & Operation
      • Component Locations
        • Component Locations (129 Chassis With 113 Engine)
        • Component Locations (202 & 208 Chassis)
        • Component Locations (210 Chassis With 112/113/606 Engines)
      • Using Diagnostic Charts
      • Programming
        • Activating & Initializing Steering Angle Sensor
        • Control Module Adaptation
      • Trouble Shooting
        • Notes
        • Test Preparation
        • Function Test
        • Symptom Index
      • Self-Diagnostic System (Section 11)
        • Retrieving Diagnostic Trouble Codes
        • Clearing Diagnostic Trouble Codes
        • Diagnostic Trouble Code Definitions (Section 12)
      • System Tests
        • Test Preparation
        • Brake Assist (BAS), Electronic Stability Program (Esp) & Speed Sensitive Power Steering (SPS) Electrical Tests Program (Section 23)
          • Test Step 1.0-5.0
          • Test Step 6.0-9.1
          • Test Step 10.0-13.0
          • Test Step 13.1-18.0
          • Test Step 19.0-27.0
          • Test Step 28.0-34.1
          • Test Step 35.0-36.2
      • Removal & Installation
        • Notes
        • Parameter Steering "P" Valve (Y10)
      • Connector Identification
      • Special Tools
    • Electronic Power Steering - Wiring Diagrams
      • Wiring Diagrams
  • Manual Steering
    • Steering -- 129 Chassis
      • General Information
        • Evaluating steering rack when repairing accident vehicles - AH46.20-P-9409-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Steering - AR46.00-Z-9129AA
        • Removing and installing steering wheel - AR46.10-P-0100
          • Removing and installing steering wheel - AR46.10-P-0100A
            • Notes
            • Installation of replacement steering wheel - AR46.10-P-0100-01A
          • Removing and installing steering wheel - AR46.10-P-0100B
        • Removing and installing spring contact - AR46.10-P-0200A
          • Notes
          • Set the clock spring contact to center position - AR46.10-P-0200-01A
        • Removing and installing steering angle sensor - AR46.10-P-0300
          • Removing and installing steering angle sensor - AR46.10-P-0300A
            • Notes
            • Activating steering angle sensor - AR46.10-P-0300-01A
          • Removing and installing steering angle sensor - AR46.10-P-0300B
        • Removing and installing jacket tube - AR46.10-P-0400A
        • Dismantling and assembling rigid jacket tube - AR46.10-P-0500A
          • Notes
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01C
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01E
          • Dismantling and assembling inner jacket tube - AR46.10-P-0500-02C
        • Dismantling and assembling electrically adjustable jacket tube - AR46.10-P-0600A
          • Notes
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01A
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01B
          • Removing and installing lower bracket for jacket tube - AR46.10-P-0600-02A
          • Removing and installing motor for longitudinal steering column adjustment - AR46.10-P-0600-03A
          • Removing and installing jacket tube pressure element - AR46.10-P-0600-04A
        • Removing and installing lock cylinder - AR46.10-P-0800
          • Removing and installing lock cylinder - AR46.10-P-0800A
          • Removing and installing lock cylinder - AR46.10-P-0800C
        • Removing and installing steering lock - AR46.10-P-0900A
          • Notes
          • Unlock steering lock - AR46.10-P-0900-01A
        • Adjusting steering gear in vehicle - AR46.20-P-0100A
          • Notes
          • Adjusting friction torque of steering gear - AR46.20-P-0100-01A
        • Replacing sealing ring in lower steering gear cover - AR46.20-P-0200A
        • Removing and installing steering gear - AR46.20-P-0500B
          • Notes
          • Placing steering gear in center position - AR46.20-P-0500-01A
        • Fill power steering pump and bleed - AR46.30-P-0010
          • Fill power steering pump and bleed - AR46.30-P-0010A
          • Fill power steering pump and bleed - AR46.30-P-0010B
        • Checking oil pressure of power steering pump - AR46.30-P-0100
          • Checking oil pressure in power steering pump - AR46.30-P-0100A
          • Checking oil pressure of power steering pump - AR46.30-P-0100GH
        • Removing and installing power steering pump - AR46.30-P-0500
          • Removing and installing power steering pump - AR46.30-P-0500A
          • Removing and installing power steering pump - AR46.30-P-0500B
        • Remove/install drag link - AR46.40-P-0100A
        • Removing and installing tie rod - AR46.40-P-0200A
        • Remove/install steering idler arm, replacing plain rubber mount - AR46.40-P-0300A
      • Maintenance
        • Check and correct power steering fluid level - AP46.00-P-4611
          • Checking and adjusting oil level in power steering - AP46.00-P-4611BA
          • Check and correct power steering fluid level - AP46.00-P-4611BB
        • Inspect play of track rod and drag link joints, inspect rubber boots - AP46.00-P-4653BA
        • Check tie rod and center link for play - AP46.40-P-4650-01BA
      • Repair & Adjustments
        • Adjusting steering gear in vehicle - RA46001243230X(46-3230)
        • Removing and installing drag link - RA46001246177X(46-6177)
        • Removing and installing tie rod - RA46001247007X(46-7007)
        • Removing and installing contact spiral - RA46001248300X(46-8300)
        • Removal and installation of steering wheel - RA46001260610X(46-610)
        • Steering gear survey - RA4600FBL0001X(46-0001)
          • Steering gear survey - RA4600FBL0001X(46-0001)
          • Survey of steering gears - RA46097650001X(46-0001)
        • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Survey of power steering pumps (LHP)/tandem pumps (TANP) - RA46097650002X(46-0002)
        • Steering wheel survey - RA4600FBL0003X(46-0003)
        • General - RA4600FBL0005X(46-0005)
        • Functional survey - RA4600FBL0006X(46-0006)
        • Design and function of steering gear - RA4600FBL0010X(46-0010)
        • Design and function of electrical components in PARAMETER STEERING - RA4600FBL0020X(46-0020)
        • Design and function of power steering pump - RA4600FBL0050X(46-0050)
        • Design and function of tandem pump - RA4600FBL0060X(46-0060)
        • Function of electrically adjustable jacket tube - RA4600FBL0615X(46-0615)
        • Function of manually adjustable jacket tube - RA4600FBL0616X(46-0616)
        • Function of contact spiral between steering column tube and steering wheel - RA4600FBL0617X(46-0617)
        • Checking and adjusting friction torque of steering gear - RA46097650120X(46-0120)
        • Replacing steering gear when performing repairs to vehicle involved in accident - RA46097650140X(46-0140)
        • Removing and installing parameter steering (PML) P-valve (Y10) - RA46097650231X(46-0231)
        • Removing, installing and checking bearing cover with pitman arm shaft - RA46097650232X(46-0232)
        • Disassembling and assembling pitman arm shaft/bearing cover - RA46097650233X(46-0233)
        • Removing and installing adjusting screw - RA46097650234X(46-0234)
        • Removing, installing and checking play compensator - RA46097650235X(46 - 0235)
        • Removing and installing steering shaft/bearing cover, replacing radial seal ring - RA46097650236X(46-0236)
        • Removing, installing and checking control valve - RA46097650238X(46 - 0238)
        • Filling and bleeding the power steering pump/tandem pump - RA46097650715X(46-0715)
        • Technical modifications -steering gear 765.9 Models 124, 129, 140, 201, 202 and power steering pumps - RA4609765TA00X
        • Disassembling and assembling power steering pump/tandem pump - RA46A97650730X(46-0730)
        • Tandem pump models 67, 167 - RA46C97650730X(C.)
      • Component Modifications
        • 2nd version of steering lock - BT46.10-P-0001-01A
        • 3rd version of steering lock - BT46.10-P-0002-01A
        • 4th version of steering lock - BT46.10-P-0003-01A
        • 5th version of steering lock - BT46.10-P-0004-01A
  • Power Steering
    • Steering -- 129 Chassis
      • General Information
        • Evaluating steering rack when repairing accident vehicles - AH46.20-P-9409-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Steering - AR46.00-Z-9129AA
        • Removing and installing steering wheel - AR46.10-P-0100
          • Removing and installing steering wheel - AR46.10-P-0100A
            • Notes
            • Installation of replacement steering wheel - AR46.10-P-0100-01A
          • Removing and installing steering wheel - AR46.10-P-0100B
        • Removing and installing spring contact - AR46.10-P-0200A
          • Notes
          • Set the clock spring contact to center position - AR46.10-P-0200-01A
        • Removing and installing steering angle sensor - AR46.10-P-0300
          • Removing and installing steering angle sensor - AR46.10-P-0300A
            • Notes
            • Activating steering angle sensor - AR46.10-P-0300-01A
          • Removing and installing steering angle sensor - AR46.10-P-0300B
        • Removing and installing jacket tube - AR46.10-P-0400A
        • Dismantling and assembling rigid jacket tube - AR46.10-P-0500A
          • Notes
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01C
          • Detaching and attaching lower steering shaft - AR46.10-P-0500-01E
          • Dismantling and assembling inner jacket tube - AR46.10-P-0500-02C
        • Dismantling and assembling electrically adjustable jacket tube - AR46.10-P-0600A
          • Notes
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01A
          • Installing upper bracket for jacket tube - AR46.10-P-0600-01B
          • Removing and installing lower bracket for jacket tube - AR46.10-P-0600-02A
          • Removing and installing motor for longitudinal steering column adjustment - AR46.10-P-0600-03A
          • Removing and installing jacket tube pressure element - AR46.10-P-0600-04A
        • Removing and installing lock cylinder - AR46.10-P-0800
          • Removing and installing lock cylinder - AR46.10-P-0800A
          • Removing and installing lock cylinder - AR46.10-P-0800C
        • Removing and installing steering lock - AR46.10-P-0900A
          • Notes
          • Unlock steering lock - AR46.10-P-0900-01A
        • Adjusting steering gear in vehicle - AR46.20-P-0100A
          • Notes
          • Adjusting friction torque of steering gear - AR46.20-P-0100-01A
        • Replacing sealing ring in lower steering gear cover - AR46.20-P-0200A
        • Removing and installing steering gear - AR46.20-P-0500B
          • Notes
          • Placing steering gear in center position - AR46.20-P-0500-01A
        • Fill power steering pump and bleed - AR46.30-P-0010
          • Fill power steering pump and bleed - AR46.30-P-0010A
          • Fill power steering pump and bleed - AR46.30-P-0010B
        • Checking oil pressure of power steering pump - AR46.30-P-0100
          • Checking oil pressure in power steering pump - AR46.30-P-0100A
          • Checking oil pressure of power steering pump - AR46.30-P-0100GH
        • Removing and installing power steering pump - AR46.30-P-0500
          • Removing and installing power steering pump - AR46.30-P-0500A
          • Removing and installing power steering pump - AR46.30-P-0500B
        • Remove/install drag link - AR46.40-P-0100A
        • Removing and installing tie rod - AR46.40-P-0200A
        • Remove/install steering idler arm, replacing plain rubber mount - AR46.40-P-0300A
      • Maintenance
        • Check and correct power steering fluid level - AP46.00-P-4611
          • Checking and adjusting oil level in power steering - AP46.00-P-4611BA
          • Check and correct power steering fluid level - AP46.00-P-4611BB
        • Inspect play of track rod and drag link joints, inspect rubber boots - AP46.00-P-4653BA
        • Check tie rod and center link for play - AP46.40-P-4650-01BA
      • Repair & Adjustments
        • Adjusting steering gear in vehicle - RA46001243230X(46-3230)
        • Removing and installing drag link - RA46001246177X(46-6177)
        • Removing and installing tie rod - RA46001247007X(46-7007)
        • Removing and installing contact spiral - RA46001248300X(46-8300)
        • Removal and installation of steering wheel - RA46001260610X(46-610)
        • Steering gear survey - RA4600FBL0001X(46-0001)
          • Steering gear survey - RA4600FBL0001X(46-0001)
          • Survey of steering gears - RA46097650001X(46-0001)
        • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Power steering/tandem pump survey - RA4600FBL0002X(46-0002)
          • Survey of power steering pumps (LHP)/tandem pumps (TANP) - RA46097650002X(46-0002)
        • Steering wheel survey - RA4600FBL0003X(46-0003)
        • General - RA4600FBL0005X(46-0005)
        • Functional survey - RA4600FBL0006X(46-0006)
        • Design and function of steering gear - RA4600FBL0010X(46-0010)
        • Design and function of electrical components in PARAMETER STEERING - RA4600FBL0020X(46-0020)
        • Design and function of power steering pump - RA4600FBL0050X(46-0050)
        • Design and function of tandem pump - RA4600FBL0060X(46-0060)
        • Function of electrically adjustable jacket tube - RA4600FBL0615X(46-0615)
        • Function of manually adjustable jacket tube - RA4600FBL0616X(46-0616)
        • Function of contact spiral between steering column tube and steering wheel - RA4600FBL0617X(46-0617)
        • Checking and adjusting friction torque of steering gear - RA46097650120X(46-0120)
        • Replacing steering gear when performing repairs to vehicle involved in accident - RA46097650140X(46-0140)
        • Removing and installing parameter steering (PML) P-valve (Y10) - RA46097650231X(46-0231)
        • Removing, installing and checking bearing cover with pitman arm shaft - RA46097650232X(46-0232)
        • Disassembling and assembling pitman arm shaft/bearing cover - RA46097650233X(46-0233)
        • Removing and installing adjusting screw - RA46097650234X(46-0234)
        • Removing, installing and checking play compensator - RA46097650235X(46 - 0235)
        • Removing and installing steering shaft/bearing cover, replacing radial seal ring - RA46097650236X(46-0236)
        • Removing, installing and checking control valve - RA46097650238X(46 - 0238)
        • Filling and bleeding the power steering pump/tandem pump - RA46097650715X(46-0715)
        • Technical modifications -steering gear 765.9 Models 124, 129, 140, 201, 202 and power steering pumps - RA4609765TA00X
        • Disassembling and assembling power steering pump/tandem pump - RA46A97650730X(46-0730)
        • Tandem pump models 67, 167 - RA46C97650730X(C.)
      • Component Modifications
        • 2nd version of steering lock - BT46.10-P-0001-01A
        • 3rd version of steering lock - BT46.10-P-0002-01A
        • 4th version of steering lock - BT46.10-P-0003-01A
        • 5th version of steering lock - BT46.10-P-0004-01A
  • Steering Column
    • Description & Operation
    • Service Precautions
    • System Operation Check
    • Disabling & Activating Air Bag System
      • Notes
      • C230 & C280
        • Disabling System
        • Activating System
      • E300D, E320, SL320 & SL500
        • Disabling System
        • Activating System
      • S320, S420 & S500
        • Disabling System
        • Activating System
    • Adjustments
      • CLOCKSPRING
    • Removal & Installation
      • Notes
      • Air Bag Module
        • Notes
        • Removal & Installation
      • CLOCKSPRING
        • Removal & Installation
      • Steering Wheel
        • Removal
        • Installation
      • Combination Switch
        • Removal
        • Installation
      • Steering Lock Housing
        • Removal & Installation (C230 & C280)
        • Removal (Except C230 & C280)
        • Installation
      • Ignition Key Cylinder
        • Notes
        • Removal & Installation (C230 & C280)
        • Removal & Installation (E320 & E430 With Electronic Ignition/Start Switch)
        • Removal & Installation (E320 & E430 Without Electronic Ignition/Start Switch)
        • Removal & Installation (S320, S420, S500, SL320 & SL500)
      • Steering Column
        • Removal
        • Installation
      • Lower Steering Column Shaft
        • Removal
        • Installation
    • Overhaul
    • Torque Specifications
  • Power Steering Gear
    • Description & Operation
    • Application
    • Lubrication
      • Fluid Type
      • Fluid Capacity
      • Power Steering Pump Bleeding
    • Adjustments
      • Belt Tension
      • Steering Gear Friction Torque
    • System Tests
      • Hydraulic System Pressure Testing (Standard Pump)
    • Removal & Installation
      • Belt
        • Removal & Installation (Gasoline Engine Belt Tensioner)
        • Removal & Installation (Diesel Engine Belt Tensioner)
      • Power Steering Pump
        • Removal & Installation
      • Power Steering Gear
        • Notes
        • Removal & Installation (CL500, S320, S420 & S500)
        • Removal & Installation (C230, C280, CLK320, SL320, SL500 & SLK230)
    • Overhaul
    • Torque Specifications
• Suspension
  • Front Suspension
    • Front Axle -- 129 Chassis
      • Repair & Adjustments
        • Technical data - RA33001240010X(33-0010)
        • Removing and installing front axle halves - RA33001240200X(33-0200)
        • Adjusting wheel bearing play - RA33001240300X(33-0300)
        • Removing and installing front wheel hub - RA33001240310X(33-0310)
        • Replacing front wheel hub - RA33001240320X(33-0320)
        • Removing and installing steering knuckle - RA33001240400X(33-0400)
        • Removing and installing steering knuckle arm - RA33001240420X(33-0420)
        • Checking supporting joint of steering knuckle mounting - RA33001240425X(33-0425)
        • Replacing boot for supporting joint of steering knuckle mounting - RA33001240430X(33 - 0430)
        • Replacing supporting joint - RA33001240440X(33-0440)
        • Replacing control arm mounting - RA33001240526X(33-0526)
        • RA3300124PR00X
        • Technical modifications front axle Models 124, 129, 201 - RA3300124TA00X
    • Suspension - Front- Strut Type
      • Description
      • Adjustments & Inspection
        • Ball Joint Checking
        • Wheel Alignment Specifications & Procedures
        • Wheel Bearings
          • Inspection
          • Adjustment
      • Removal & Installation
        • Ball Joint
          • Removal & Installation
        • Coil Spring
          • Notes
          • Removal
          • Installation
        • Lower Control Arm
          • Notes
          • Removal
          • Installation
        • Lower Control Arm Bushings
          • Removal
          • Installation
        • Stabilizer Bar
          • Removal & Installation
        • Steering Knuckle
          • Notes
          • Removal & Installation
        • Steering Knuckle Arm
          • Removal & Installation
        • Strut Assembly
          • Notes
          • Removal
          • Installation
        • Suspension Assembly
          • Notes
          • Removal
          • Installation
        • Wheel Hub
          • Removal & Installation
      • Torque Specifications
    • Suspension -- 129 Chassis
      • General Information
        • General notes on working on vehicles with level control/ADS - AH32.00-P-0002-01A
        • Springs; general background information. - AH32.20-P-9404-01A
      • Basic Knowledge
        • Adaptive damping system (ADS II), function - GF32.32-P-0001A
          • Notes
          • Adaptive damping system (ADS II), task and benefits - GF32.32-P-0001-02A
          • Adaptive damping system (ADS II), location of hydraulic components - GF32.32-P-0001-06A
          • Adaptive damping system (ADS II), location of electrical/electronic components - GF32.32-P-0001-07A
      • Self-Diagnostic System
        • Notes on function check, adaptive damping system (ADS II) - AD32.32-P-2000-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9129AA
        • Removing and installing front spring - AR32.20-P-0200A
          • Notes
          • Tensioning and untensioning spring - AR32.20-P-0200-01A
        • Removing and installing rear spring - AR32.20-P-0230A
        • Removing and installing torsion bar on front axle - AR32.20-P-0300A
        • Removing and installing torsion bar on rear axle - AR32.20-P-0315A
        • Removing and installing front shock absorber strut - AR32.25-P-0100A
        • Remove/install rear shock absorber - AR32.25-P-0110A
        • Checking shock absorber strut - AR32.25-P-0120A
        • Checking shock absorber - AR32.25-P-0121A
        • Checking level control pressure oil pump - AR32.31-P-0510A
          • Notes
          • Connecting and disconnecting tester at rear axle distributor fitting - AR32.31-P-0510-01A
        • Removing and installing front axle spring strut - AR32.31-P-0605A
        • Remove/install rear axle suspension strut - AR32.31-P-0610A
          • Notes
          • Checking and setting distance between rear axle spring strut and wheel house - AR32.31-P-0610-01A
        • Removing and installing rear axle spring actuator - AR32.31-P-0615A
        • Removing and installing rear axle spring actuator - AR32.31-P-0620A
        • Draining and filling pressure oil system at front and rear axle - AR32.31-P-0630A
        • Removing and installing level control valve unit - AR32.31-P-0650A
        • Removing and installing rear axle damper valve - AR32.31-P-0680A
        • Removing and installing front axle damper valves - AR32.31-P-0685A
        • Removing, installing ADS control unit - AR32.32-P-0500A
        • Replace (ADS) suspension control unit and adapt vehicle electrical system to control unit version - AR32.32-P-0501SL
        • Remove/install of wiring harness for adaptive damping system (ADS) - AR32.32-P-0505SL
          • Notes
          • Changing coupling pin assignment - AR32.32-P-0505-17SL
        • Remove/install comfort/sport switch - AR32.32-P-0517SL
      • Maintenance
        • Check and correct level control, 4MATIC, ASD, ADS fluid level - AP32.30-P-3211BA
      • Repair & Adjustments
        • General work on vehicles with ADS - RA32001290600X(32-0600)
        • Removing and installing front axle spring strut or shock absorber/ADS - RA32001290605X(32-0605)
        • Rear strut assembly - Removal and installation - RA32001290610X(32-0610)
        • Front pressure accumulator - Removal and installation - RA32001290615X(32-0615)
        • Rear pressure accumulator - Removal and installation - RA32001290620X(32-0620)
        • Hydraulic system - Draining and refilling - RA32001290630X(32-0630)
        • Level control valve assembly - Removal and installation - RA32001290650X(32-0650)
        • Control/linkage rod on level controller - Removal and installation - RA32001290660X(32-0660)
        • Front level controller - Removal and installation - RA32001290665X(32-0665)
        • Rear level controller - Removal and installation - RA32001290670X(32-0670)
        • Damper valves - Removal and installation - RA32001290680X(32-0680)
        • Technical modifications - Level control with ADS 140 Models 129. - RA3200129TA01X
      • Component Modifications
        • High-pressure stretch hose installed in oil circuit (ADS) - BT32.32-P-0001-01A
      • Miscellaneous Notes
        • Disposing of damper strut - OS32.25-P-0120-01A
        • Disposing of shock absorber - OS32.25-P-0121
          • Disposing of shock absorber - OS32.25-P-0121-01A
          • Disposing of shock absorber - OS32.25-P-0121-01GC
          • Disposing of shock absorber - OS32.25-P-0121-01GH
        • Disposing on spring actuator - OS32.30-P-0620-01A
  • Rear Suspension
    • Rear Axle -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Rear axle - AR35.00-Z-9129AA
        • Removing and installing complete rear axle - AR35.10-P-0010C
          • Notes
          • Removing and installing bracket for ADS level controller - AR35.10-P-0010-01A
        • Removing, installing front and rear rubber mount of rear axle mount - AR35.10-P-0040C
          • Notes
          • Removing and installing front rubber mounts of rear axle mounting - AR35.10-P-0040-02D
          • Removing and installing rear rubber mounts of rear axle mounting - AR35.10-P-0040-03E
        • Removing, installing rear rubber mount for center assembly mount in rear axle carrier - AR35.10-P-0050C
          • Notes
          • Install front differential mount - AR35.10-P-0050-01A
          • Removing and installing rear rubber mounts of rear axle center assembly mounting - AR35.10-P-0050-02C
          • Checking installed position of center assembly in rear axle carrier - AR35.10-P-0050-03C
          • Supporting rear axle with wooden blocks - AR35.10-P-0050-04A
        • Remove/install camber strut - AR35.20-P-0110B
          • Notes
          • Inserting sleeve for camber strut in wheel carrier - AR35.20-P-0110-02A
        • Remove/install radius rod - AR35.20-P-0111B
          • Notes
          • Inserting sleeve for tensile strut in wheel carrier - AR35.20-P-0111-01A
        • Remove/install tie rod and replacement of rubber mount - AR35.20-P-0112B
          • Notes
          • Removal and installation of track rod rubber mount - AR35.20-P-0112-01B
        • Remove/install torque strut - AR35.20-P-0113B
          • Notes
          • Inserting sleeve for torque strut in wheel carrier - AR35.20-P-0113-01A
        • Remove/install spring link, replace rubber mount - AR35.20-P-0114B
          • Notes
          • Remove/install spring link rubber mount - AR35.20-P-0114-01B
          • Removing and installing guide rail at spring link - AR35.20-P-0114-02A
        • Remove/install wheel carrier - AR35.20-P-0115B
        • Removing, installing supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116B
          • Notes
          • Remove/install supporting joint on wheel carrier - AR35.20-P-0116-01B
        • Remove/install rear axle shaft flange and angular ball bearing - AR35.20-P-0130B
          • Notes
          • Pulling rear axle shaft flange out and in (wheel carrier installed) - AR35.20-P-0130-01A
          • Pulling out and drawing in rear-axle shaft flange (wheel carrier installed) - AR35.20-P-0130-01B
          • Pull bearing inner race off rear axle shaft flange - AR35.20-P-0130-02A
          • Remove/install double-row angular ball bearing in wheel carrier - AR35.20-P-0130-03A
          • Pulling jammed rear axle shaft flange out and in (wheel carrier removed) - AR35.20-P-0130-04GH
        • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115
          • Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03A
          • Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03B
        • Remove/install rear axle shaft - AR35.30-P-0620A
        • Remove/install inside CV joint or rubber boots on rear axle shaft - AR35.30-P-0660A
          • Notes
          • Installing end cover and cup seal on joint ring - AR35.30-P-0660-01A
          • Inner constant-velocity joint on rear halfshaft, extraction and pressing on - AR35.30-P-0660-02A
          • Inner constant-velocity joint - Dismantling, inspecting for wear, assembly - AR35.30-P-0660-03A
        • Remove/install rear axle differential - AR35.31-P-0520C
        • Connecting flange components - AR35.31-P-0540
          • Detaching, mounting connecting flange circlip - AR35.31-P-0540-01A
          • Pulling off and pressing on grooved ball bearing connecting flange - AR35.31-P-0540-04A
        • Clamping differential housing - AR35.31-P-0560-01A
        • Bleeding ASD hydraulic system - AR35.41-P-0519C
        • Repairing ASD ring cylinder - AR35.41-P-0545
          • Repairing ASD ring cylinder - AR35.41-P-0545C
            • Notes
            • Removing and installing ASD hydraulic pipe on rear axle center assembly - AR35.41-P-0545-01C
            • Removing and installing ring cylinder - AR35.41-P-0545-02C
            • Installing oil deflector in rear axle housing - AR35.41-P-0545-03C
            • Repairing ring cylinder - AR35.41-P-0545-04C
          • Repairing ASD ring cylinder - AR35.41-P-0545D
            • Notes
            • Repairing ring cylinder - AR35.41-P-0545-04D
        • Dismantling and assembling ASD differential - AR35.41-P-0560C
          • Notes
          • Driving out and driving in ASD differential pin and roll pin - AR35.41-P-0560-02C
          • Removing and installing differential bevel gears with spherical washers - AR35.41-P-0560-03C
          • Removing and installing differential side gears with friction washers - AR35.41-P-0560-04C
          • Checking friction torque of ASD differential - AR35.41-P-0560-05C
      • Repair & Adjustments
        • Distinguishing features and installation survey for rear axle center piece in models 129 and 140 - RA3500HMV0500X(35-500)
        • Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMV0550X(35-550)
        • Repairing differential - RA3500HMV0560X(35-560)
        • Technical modifications Rear axle center piece with 210 mm dia. crown wheel (reinforced) - RA3500HMVTA00X
      • Component Modifications
        • Increased core diameter of rear rubber mounts in rear axle cross member - BT35.10-P-0001-01A
        • Stiffer spring link rubber mounts - BT35.20-P-0001-01A
        • Standardization of spring link rubber mounts - BT35.20-P-0002-01A
        • Diameter of wheel carrier holes modified - BT35.20-P-0005-01A
        • Bolted connection of torque strut to wheel carrier modified - BT35.20-P-0006-01A
        • Bolted connection of camber strut to wheel carrier modified - BT35.20-P-0007-01A
        • Bolted connection of tensile strut to wheel carrier modified - BT35.20-P-0008-01A
        • Bolted connection of track rod to wheel carrier revised - BT35.20-P-0009-01A
        • Rear axle shaft strengthened at ball cage k - BT35.30-P-0001-01A
        • Rear axle shaft diameter increased - BT35.30-P-0002-01A
        • Modified rear axle shaft rubber boot and hose clamp - BT35.30-P-0003-01A
        • Centered rear axle shaft and connecting flange - BT35.30-P-0004-01A
        • Rear axle shafts with forged centers (without core hole bore) - BT35.30-P-0005-01A
        • Modified front mounting of rear axle center assembly - BT35.31-P-0001-01A
        • Tapped hole of speed sensor on rear axle housing moved - BT35.31-P-0004-01A
        • Balancing of differential housing - BT35.31-P-0006
          • Balancing of differential housing - BT35.31-P-0006-01B
          • Balancing of differential housing - BT35.31-P-0006-01C
        • Connecting flange with centering - BT35.31-P-0009-01A
        • Routing of ASD ring cylinder and hydraulic pipe modified - BT35.41-P-0002-01A
    • Suspension - Rear
      • Description
      • Adjustments & Inspection
        • Wheel Alignment Specifications & Adjustments
      • Hydraulic Pressure Release
        • Level Control System
        • Automatic Locking Differential (ASD)
      • Hydraulic System Refill
        • Level Control System
        • Automatic Locking Differential (ASD)
      • Removal & Installation
        • Notes
        • Camber Strut
          • Notes
          • Removal & Installation
        • Coil Spring
          • Notes
          • Removal & Installation
        • Lower Suspension Arm
          • Notes
          • Removal & Installation
        • Radius Rod
          • Notes
          • Removal & Installation
        • Rear Suspension & Axle Carrier
          • Notes
          • Removal
          • Installation
        • Shock Absorber
          • Removal & Installation
        • Thrust Rod
          • Notes
          • Removal & Installation
        • Track Rod
          • Notes
          • Removal & Installation
        • Wheel Carrier
          • Notes
          • Removal
          • Installation
        • Wheel Carrier Supporting Joint
          • Notes
          • Removal & Installation
      • Torque Specifications
    • Suspension -- 129 Chassis
      • General Information
        • General notes on working on vehicles with level control/ADS - AH32.00-P-0002-01A
        • Springs; general background information. - AH32.20-P-9404-01A
      • Basic Knowledge
        • Adaptive damping system (ADS II), function - GF32.32-P-0001A
          • Notes
          • Adaptive damping system (ADS II), task and benefits - GF32.32-P-0001-02A
          • Adaptive damping system (ADS II), location of hydraulic components - GF32.32-P-0001-06A
          • Adaptive damping system (ADS II), location of electrical/electronic components - GF32.32-P-0001-07A
      • Self-Diagnostic System
        • Notes on function check, adaptive damping system (ADS II) - AD32.32-P-2000-01A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9129AA
        • Removing and installing front spring - AR32.20-P-0200A
          • Notes
          • Tensioning and untensioning spring - AR32.20-P-0200-01A
        • Removing and installing rear spring - AR32.20-P-0230A
        • Removing and installing torsion bar on front axle - AR32.20-P-0300A
        • Removing and installing torsion bar on rear axle - AR32.20-P-0315A
        • Removing and installing front shock absorber strut - AR32.25-P-0100A
        • Remove/install rear shock absorber - AR32.25-P-0110A
        • Checking shock absorber strut - AR32.25-P-0120A
        • Checking shock absorber - AR32.25-P-0121A
        • Checking level control pressure oil pump - AR32.31-P-0510A
          • Notes
          • Connecting and disconnecting tester at rear axle distributor fitting - AR32.31-P-0510-01A
        • Removing and installing front axle spring strut - AR32.31-P-0605A
        • Remove/install rear axle suspension strut - AR32.31-P-0610A
          • Notes
          • Checking and setting distance between rear axle spring strut and wheel house - AR32.31-P-0610-01A
        • Removing and installing rear axle spring actuator - AR32.31-P-0615A
        • Removing and installing rear axle spring actuator - AR32.31-P-0620A
        • Draining and filling pressure oil system at front and rear axle - AR32.31-P-0630A
        • Removing and installing level control valve unit - AR32.31-P-0650A
        • Removing and installing rear axle damper valve - AR32.31-P-0680A
        • Removing and installing front axle damper valves - AR32.31-P-0685A
        • Removing, installing ADS control unit - AR32.32-P-0500A
        • Replace (ADS) suspension control unit and adapt vehicle electrical system to control unit version - AR32.32-P-0501SL
        • Remove/install of wiring harness for adaptive damping system (ADS) - AR32.32-P-0505SL
          • Notes
          • Changing coupling pin assignment - AR32.32-P-0505-17SL
        • Remove/install comfort/sport switch - AR32.32-P-0517SL
      • Maintenance
        • Check and correct level control, 4MATIC, ASD, ADS fluid level - AP32.30-P-3211BA
      • Repair & Adjustments
        • General work on vehicles with ADS - RA32001290600X(32-0600)
        • Removing and installing front axle spring strut or shock absorber/ADS - RA32001290605X(32-0605)
        • Rear strut assembly - Removal and installation - RA32001290610X(32-0610)
        • Front pressure accumulator - Removal and installation - RA32001290615X(32-0615)
        • Rear pressure accumulator - Removal and installation - RA32001290620X(32-0620)
        • Hydraulic system - Draining and refilling - RA32001290630X(32-0630)
        • Level control valve assembly - Removal and installation - RA32001290650X(32-0650)
        • Control/linkage rod on level controller - Removal and installation - RA32001290660X(32-0660)
        • Front level controller - Removal and installation - RA32001290665X(32-0665)
        • Rear level controller - Removal and installation - RA32001290670X(32-0670)
        • Damper valves - Removal and installation - RA32001290680X(32-0680)
        • Technical modifications - Level control with ADS 140 Models 129. - RA3200129TA01X
      • Component Modifications
        • High-pressure stretch hose installed in oil circuit (ADS) - BT32.32-P-0001-01A
      • Miscellaneous Notes
        • Disposing of damper strut - OS32.25-P-0120-01A
        • Disposing of shock absorber - OS32.25-P-0121
          • Disposing of shock absorber - OS32.25-P-0121-01A
          • Disposing of shock absorber - OS32.25-P-0121-01GC
          • Disposing of shock absorber - OS32.25-P-0121-01GH
        • Disposing on spring actuator - OS32.30-P-0620-01A
  • Wheel Alignment
    • Wheel Alignment Specifications & Procedures
      • Riding Height Adjustment
        • Notes
        • Checking Riding Height
          • Notes
          • Front Axle (C230, C280, C43, CLK320, CLK430, CL500 (1999), E300 Turbo Diesel, E320, E430, E55, S320, S420, S500 (1999), SL500 & SLK230)
          • Rear Axle (C230, C280, C43, CLK320, CLK430, CL500 (1999), E300 Turbo Diesel, E320, E430, E55, S320, S420, S500 (1999) & SL500)
          • Rear Axle (SLK230)
        • Adjusting Riding Height
          • Front Axle
          • Rear Axle
        • Adjusting Control Point Of Level Control System
          • Notes
          • C230, C280, C43, CLK320 & CLK430
          • Cl500 (1999), S320, S420 & S500 (1999)
          • E300 Turbo Diesel, E320, E430 & E55
        • Ball Point Position
          • C230, C280, C43, Cl500 (1999), CLK320, CLK430, S320, S420, S500 (1999) & SLK230
      • Jacking & Hoisting
        • Notes
        • Floor Jack Or Hoist
        • Emergency Jacking
      • Wheel Alignment Procedures
        • Performing Alignment Procedure
        • Adjustments
      • Torque Specifications
      • Wheel Alignment Specifications
    • Wheels, Chassis Alignment Check -- 129 Chassis
      • General Information
        • Information on measuring tire tread depth - AH40.10-P-0006-01T
        • Notes on tire flat spots - AH40.10-P-1030-01A
        • Information on tires / rims - AH40.10-P-9411-01A
      • Testing & Repair
        • General information on vehicle level measurement - AR40.00-P-0202A
        • Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9129AA
        • Checking condition of rim - AR40.10-P-1010-01A
        • Replace tires - AR40.10-P-1030A
        • Balance wheels - AR40.10-P-1040A
          • Notes
          • Mounting centering sleeve - AR40.10-P-1040-01A
          • Balancing wheels on vehicles with ETS, ASR or ESP - AR40.10-P-1040-03A
        • Perform chassis alignment check - AR40.20-P-0200A
        • General information on chassis alignment - AR40.20-P-0201A
        • Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230A
        • Checking vehicle level at front and rear axles - AR40.20-P-0300
          • Checking vehicle level at front and rear axles - AR40.20-P-0300A
            • Notes
            • Adjusting vehicle level by altering springs or rubber spring mount - AR40.20-P-0300-01A
          • Checking vehicle level at front and rear axles - AR40.20-P-0300D
          • Checking vehicle level at front and rear axles - AR40.20-P-0300E
        • Check ball point position - AR40.20-P-0320A
        • Adjusting ball point position - AR40.20-P-0321A
        • Checking and adjusting camber and caster of front wheels - AR40.20-P-0322A
        • Check and adjust front axle toe-in - AR40.20-P-0323A
        • Checking toe-out on turns - AR40.20-P-0325A
        • Checking rear axle camber - AR40.20-P-0331A
        • Check and adjust toe on rear axle - AR40.20-P-0332A
        • Check accidents vehicles and vehicles in which accident damage is suspected - AR40.30-P-0400A
        • Preparations for dimensional and comparative measurement - AR40.30-P-0401A
          • Notes
          • Adjusting fixtures for distance and comparison measurement according to the model concerned - AR40.30-P-0401-01A
        • Carry out distance and comparison measurements on front and rear axles - AR40.30-P-0402A
          • Notes
          • Carrying out distance and comparison measurements on front axle - AR40.30-P-0402-01A
          • Carry out distance and comparison measurements on rear axle - AR40.30-P-0402-02A
        • Measuring rear axle carrier (when removed) - AR40.30-P-0410A
        • Measuring spring link, camber arm, radius rod, thrust arm and track rod of rear axle - AR40.30-P-0420A
        • Measuring wheel carrier (when removed) - AR40.30-P-0425A
        • Measuring steering knuckle - AR40.30-P-0451A
        • Measuring lower wishbone (when removed) - AR40.30-P-0452A
      • Maintenance
        • Remove/install wheels, rotate if necessary - AP40.10-P-4050Z
        • Check tires for damage and cracks - AP40.10-P-4051Z
  • Wheels & Tire System
    • Wheels, Chassis Alignment Check -- 129 Chassis
      • General Information
        • Information on measuring tire tread depth - AH40.10-P-0006-01T
        • Notes on tire flat spots - AH40.10-P-1030-01A
        • Information on tires / rims - AH40.10-P-9411-01A
      • Testing & Repair
        • General information on vehicle level measurement - AR40.00-P-0202A
        • Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9129AA
        • Checking condition of rim - AR40.10-P-1010-01A
        • Replace tires - AR40.10-P-1030A
        • Balance wheels - AR40.10-P-1040A
          • Notes
          • Mounting centering sleeve - AR40.10-P-1040-01A
          • Balancing wheels on vehicles with ETS, ASR or ESP - AR40.10-P-1040-03A
        • Perform chassis alignment check - AR40.20-P-0200A
        • General information on chassis alignment - AR40.20-P-0201A
        • Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230A
        • Checking vehicle level at front and rear axles - AR40.20-P-0300
          • Checking vehicle level at front and rear axles - AR40.20-P-0300A
            • Notes
            • Adjusting vehicle level by altering springs or rubber spring mount - AR40.20-P-0300-01A
          • Checking vehicle level at front and rear axles - AR40.20-P-0300D
          • Checking vehicle level at front and rear axles - AR40.20-P-0300E
        • Check ball point position - AR40.20-P-0320A
        • Adjusting ball point position - AR40.20-P-0321A
        • Checking and adjusting camber and caster of front wheels - AR40.20-P-0322A
        • Check and adjust front axle toe-in - AR40.20-P-0323A
        • Checking toe-out on turns - AR40.20-P-0325A
        • Checking rear axle camber - AR40.20-P-0331A
        • Check and adjust toe on rear axle - AR40.20-P-0332A
        • Check accidents vehicles and vehicles in which accident damage is suspected - AR40.30-P-0400A
        • Preparations for dimensional and comparative measurement - AR40.30-P-0401A
          • Notes
          • Adjusting fixtures for distance and comparison measurement according to the model concerned - AR40.30-P-0401-01A
        • Carry out distance and comparison measurements on front and rear axles - AR40.30-P-0402A
          • Notes
          • Carrying out distance and comparison measurements on front axle - AR40.30-P-0402-01A
          • Carry out distance and comparison measurements on rear axle - AR40.30-P-0402-02A
        • Measuring rear axle carrier (when removed) - AR40.30-P-0410A
        • Measuring spring link, camber arm, radius rod, thrust arm and track rod of rear axle - AR40.30-P-0420A
        • Measuring wheel carrier (when removed) - AR40.30-P-0425A
        • Measuring steering knuckle - AR40.30-P-0451A
        • Measuring lower wishbone (when removed) - AR40.30-P-0452A
      • Maintenance
        • Remove/install wheels, rotate if necessary - AP40.10-P-4050Z
        • Check tires for damage and cracks - AP40.10-P-4051Z
• Transmission
  • Automatic Trans
    • Automatic Transmission -- Basic Knowledge -- 129 Chassis
      • Basic Knowledge
        • Automatic transmission (AT), function - GF27.10-P-0001G
        • Component survey for automatic transmission - GF27.10-P-0025-02A
        • Power transmission, function - GF27.10-P-2009GH
        • Parking lock, location / task / design / function - GF27.10-P-5100G
    • Automatic Transmission -- General Information -- 129 Chassis
      • General Information
        • Notes for checking shift points in selector lever position "D" on a test trip - AH27.10-P-9407-01A
    • Automatic Transmission -- Repair & Adjustments -- 129 Chassis
      • Repair & Adjustments
        • Design of the transmissions - RA27007229000X(27-9000)
        • Function ranges - RA27007229010X(27-9010)
        • Driving tips - RA27007229020X(27-9020)
        • Torque converter - RA27007229030X(27-9030)
        • Design and operating principle of a single planet gear set - RA27007229040X(27-9040)
        • Design and operating principle of a Ravigneaux planet gear set - RA27007229050X(27-9050)
        • Mechanical design of the transmissions - RA27007229060X(27-9060)
        • Power flow in the gears - RA27007229070X(27-9070)
        • Gear reduction ratios - RA27007229080X(27-9080)
        • Primary and secondary pumps - RA27007229100X(27-9100)
        • Operating pressure - RA27007229110X(27-9110)
        • Modulating pressure - RA27007229120X(27-9120)
        • Lubricating pressure - RA27007229130X(27-9130)
        • Control pressure - RA27007229140X(27-9140)
        • Governor pressure - RA27007229150X(27-9150)
        • Boosted governor pressure - RA27007229160X(27-9160)
        • Shift pressure - RA27007229170X(27-9170)
        • Function of command valves and sequence of gearshifts - RA27007229180X(27-9180)
        • Installation survey, test and pressure data, basic and national versions - RA27037220001X(27-001)
        • Transmission ratios - RA27037220002X(27-002)
        • Adjusting cable for control pressure - RA27037220110X(27-110)
        • Removing, installing and adjusting starter lockout switch - RA27037220130X(27-130)
        • Testing and adjusting vacuum control valve, engine 603.96 - RA27037220140X(27-140)
        • Testing during the road test - RA27037220320X(27-320)
        • Shift points in selector lever position "D" - RA27037220330Z(27-330)
        • Measure and adjust pressure value - RA27037220350X(27-350)
        • Removing, installing, dismantling and assembling shift valve body - RA27037220400X(27-400)
        • Removing and installing vacuum box - RA27037220425X(27-425)
        • Removing, installing, dismantling and assembling lower cover with intermediate plate - RA27037220430X(27-430)
        • Removing, installing, dismantling and assembling rear cover (transmission in situ) - RA27037220440X(27-440)
        • Removing and installing centrifugal governor - RA27037220520X(27-520)
        • Removing, installing, dismantling and assembling secondary pump (transmission in situ) - RA27037220530X(27-530)
        • Removing and installing transmission air-oil cooler with blower (models 124/140) - RA27037220550X(27-550)
        • Removing and installing front transmission cover and primary pump - RA27037220630X(27-630)
        • Dismantling, assembling and measuring gear set - RA27037220660X(27-660)
        • Dismantling, assembling and measuring clutch K1 - RA27037220680X(27-680)
        • Dismantling, assembling and measuring clutch K2 - RA27037220690X(27-690)
        • Removing, installing and adjusting control pressure cable with vacuum actuator - RA2703722A115X(27-115)
          • Removing, installing and adjusting control pressure cable with vacuum actuator - RA2703722A115X(27-115)
          • Removing, installing and adjusting control pressure cable with vacuum actuator - RA2703722B115X(27-115)
        • Adjusting shift rod - RA2703722A120X(27-120)
        • Removing and installing transmission with torque converter - RA2703722A600X(27-600)
        • Dismantling and assembling transmission - RA2703722A640X(27-640)
          • Dismantling and assembling transmission - RA2703722A640X(27-640)
          • Dismantling and assembling transmission - RA2703722B640X(27-640)
          • Dismantling and assembling transmission - RA2703722C640X(27-640)
          • Dismantling and assembling transmission - RA2703722D640X(27-640)
        • Adjusting and checking parking lock - RA2703722B740X(27-740)
          • Adjusting and checking parking lock - RA2703722B740X(27-740)
          • Adjusting and checking parking lock - RA2703722C740X(27-740)
          • Adjusting and checking parking lock - RA2703722D740X(27-740)
        • Removing, installing, dismantling and assembling floor shift - RA2703722B745X(27-745)
          • Removing, installing, dismantling and assembling floor shift - RA2703722B745X(27-745)
          • Removing, installing, dismantling and assembling floor shift - RA2703722C745X(27-745)
        • Technical modifications Automatic transmission 722.3 I 09/88 - RA2703722TA00X
        • Hydraulic system 4th - 5th gear (722.5) - RA27057229190X(27-9190)
        • Downshifts when accelerating (function of reaction valves) - RA27057229200X(27-9200)
        • Selector lever downshifts - RA27057229210X(27-9210)
        • Damper systems - RA27057229220X(27-9220)
        • 5th Gear shift conditions - RA27057229230X(27-9230)
        • Arrangement of electrical components - RA27057229240X(27-9240)
        • Influencing parameters at 5-speed automatic transmission control unit (N15/1) - RA27057229250X(27-9250)
        • Design and function of electronics - RA27057229260X(27-9260)
        • Drive position "B" - RA27057229270X(27-9270)
        • Kickdown cutoff - RA27057229280X(27-9280)
        • Mode selector switch - RA27057229290X(27-9290)
        • Transmission shift point retard - RA27057229300X(27-9300)
        • Transmission overload protection - RA27057229320X(27-9320)
        • Downshift lock (722.5) - RA27057229330X(27-9330)
        • Parking shift lock - RA27057229340X(27-9340)
        • Selected speed indicator of floor-mounted shift - RA27057229350X(27-9350)
      • Component Modifications
        • Oil drain plug on torque converter deleted - BT27.20-P-0001-01A
    • Automatic Transmission -- Testing & Repair -- 129 Chassis
      • Testing & Repair
        • Checking oil level in automatic transmission and correcting, if necessary - AR27.00-P-0100A
        • Inspect ATF level in automatic transmission, add ATF if necessary - AR27.00-P-0101A
        • Testing and repair work: Passenger cars: Automatic transmission - AR27.00-Z-9722AC
        • Adjusting control pressure cable on throttle linkage - AR27.10-P-0120A
        • Checking upshift delay - AR27.10-P-0140A
        • Measuring and adjusting pressure values - AR27.10-P-0180A
          • Notes
          • Adjusting modulating pressure - AR27.10-P-0180-01A
          • Adjusting modulating pressure - AR27.10-P-0180-01B
          • Measuring governor pressure - AR27.10-P-0180-02A
        • Removal and installation of control pressure cable with vacuum actuator - AR27.10-P-0200A
        • Basic adjustment of control pressure cable (after replacing) - AR27.10-P-0220A
        • Removal and installation of starter lock-out switch - AR27.10-P-0240A
        • Removal and installation of vacuum unit - AR27.10-P-0260A
        • Removal and installation of centrifugal governor - AR27.10-P-0280A
          • Notes
          • Removal of centrifugal governor - AR27.10-P-0280-01A
          • Checking regulating valve for ease of movement - AR27.10-P-0280-02A
          • Installing centrifugal governor - AR27.10-P-0280-03A
        • Removal and installation, dismantling and assembling secondary pump - AR27.10-P-0300A
        • Remove/install oil pump - AR27.10-P-0400A
        • Remove/install transmission with torque converter - AR27.10-P-0500
          • Removal and installation of transmission with torque converter - AR27.10-P-0500A
          • Remove/install transmission with torque converter - AR27.10-P-0500B
            • Notes
            • Disconnecting and connecting plug connector - AR27.10-P-0500-01A
            • Remove/install oil filler pipe - AR27.10-P-0500-04A
        • Fastening transmission to assembly bracket - AR27.10-P-0600
          • Fastening transmission to assembly bracket - AR27.10-P-0600-01A
          • Fasten transmission to assembly stand - AR27.10-P-0600-01B
        • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200A
          • Notes
          • Insert selector valve into driver of detent plate - AR27.19-P-0200-01A
        • Disassemble and assemble electrohydraulic control unit - AR27.19-P-0220A
        • Remove/install torque converter - AR27.20-P-0500
          • Removing and installing torque converter - AR27.20-P-0500-01A
          • Remove/install torque converter - AR27.20-P-0500-01B
          • Flushing out oil cooler with oil cooler pipe and torque converter - AR27.20-P-0500-02A
          • Checking torque converter - AR27.20-P-0500-03A
        • Remove/install front transmission cover with primary pump - AR27.30-P-0640A
        • Dismantling and assembling front transmission cover with primary pump - AR27.30-P-0660A
          • Notes
          • Removal and installation of piston LB3 - AR27.30-P-0660-01A
          • Dismantling and assembling primary pump - AR27.30-P-0660-02A
        • Remove/install rear transmission cover - AR27.30-P-0680A
        • Dismantling and assembling rear transmission cover - AR27.30-P-0700A
          • Notes
          • Installing race/grooved ball bearing and checking play - AR27.30-P-0700-01A
        • Remove/install valve body assembly - AR27.35-P-0320A
        • Dismantling and assembling shift valve housing - AR27.35-P-0340A
          • Notes
          • Lifting damper housing with the intermediate plate - AR27.35-P-0340-01A
          • Adjusting full throttle control pressure - AR27.35-P-0340-02A
        • Dismantle and assemble shift plate - AR27.35-P-0350A
        • Removal and installation of bottom cover with intermediate plate - AR27.35-P-0360A
          • Notes
          • Removal and installation of control valve for 5th gear - AR27.35-P-0360-01A
          • Hooking up connecting linkage and adjusting play - AR27.35-P-0360-02A
        • Detaching and attaching bottom cover at large intermediate plate - AR27.35-P-0380A
        • Dismantling and assembling bottom cover - AR27.35-P-0400A
        • Loosening or fastening electrical cables at kick-down solenoid valve and at control valve for 5th gear - AR27.50-P-0360-03A
        • Dismantling and assembling transmission (section 1) - AR27.50-P-0600A
          • Notes
          • Removal and installation of one-way valve, B2 brake band guide, oil deflector and temperature throttle - AR27.50-P-0600-03A
          • Screw on and secure twelve-point collared nut and secure - AR27.50-P-0600-04B
          • Install grooved ball bearing in rear transmission housing - AR27.50-P-0600-05A
          • Measure end play between park pawl gear and grooved ball bearing - AR27.50-P-0600-06A
        • Detach/attach transmission housing on torque converter housing. - AR27.50-P-0601A
          • Notes
          • Remove grooved ball bearing in rear of transmission housing - AR27.50-P-0601-01A
        • Dismantling and assembling transmission (section 2) - AR27.50-P-0620A
          • Notes
          • Removal and installation of three-arm flange - AR27.50-P-0620-01A
        • Removing and installing multiple-disc clutches K1, K2 and K3 - AR27.50-P-0621A
        • Dismantling and assembling transmission (section 3) - AR27.50-P-0720A
          • Notes
          • Dismantling and assembling oil pump - AR27.50-P-0720-01A
        • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721A
        • Remove brake of overdrive (BS) and clutch (KS), install - AR27.50-P-0740A
          • Notes
          • Remove of internally geared wheel - AR27.50-P-0740-01A
          • Removal of overdrive brake piston - AR27.50-P-0740-02A
          • Installation of overdrive brake piston and multidiscs for overdrive brake - AR27.50-P-0740-03A
          • Installation of internally geared wheel, sun gear and planet carrier - AR27.50-P-0740-04A
          • Measurement of axial play of output shaft/intermediate shaft - AR27.50-P-0740-05A
          • Measuring axial play of output shaft/rear cover - AR27.50-P-0740-06A
          • Measurement of play in multi-discs for overdrive brake - AR27.50-P-0740-07A
        • Dismantling and assembling transmission (section 4) - AR27.50-P-0780A
          • Notes
          • Removal of brake band piston B1 - AR27.50-P-0780-01A
          • Removal of gear set - AR27.50-P-0780-02A
          • Removal of brake band B2 - AR27.50-P-0780-03A
          • Installation of brake band B2 - AR27.50-P-0780-04A
          • Installation of gear set - AR27.50-P-0780-05A
          • Installation and measurement of multi-disc brake B3 - AR27.50-P-0780-06A
          • Installation of brake band B1 - AR27.50-P-0780-07A
          • Measurement of play in brake band B1 - AR27.50-P-0780-08A
          • Measurement of play in brake band B2 - AR27.50-P-0780-09A
          • Dismantling, assembling and carrying out basic adjustment of brake band piston B1 - AR27.50-P-0780-10A
          • Inserting and measuring multiple-disc pack B3 - AR27.50-P-0780-11A
          • Checking installed position of lubricating nozzle in support flange/oil gallery K2 - AR27.50-P-0780-12A
        • Removing and installing multi-disk brake B2, disk pack B3 and park pawl gear - AR27.50-P-0781A
        • Dismantling and assembling output shaft with center and rear gear set - AR27.50-P-0810A
          • Notes
          • Checking and adjusting end play between shim and circlip - AR27.50-P-0810-01A
        • Dismantling and assembling gear set - AR27.50-P-0840A
          • Notes
          • Inspecting freewheel F2 axial clearance - AR27.50-P-0840-02A
        • Disassembling and assembling rear hollow shaft with rear freewheel - AR27.50-P-0850A
        • Dismantling and assembling freewheel F2 - AR27.50-P-0860A
        • Dismantling and assembling multi-disk brake B1 - AR27.50-P-0870A
          • Notes
          • Inserting and measuring multi-disk pack B1 - AR27.50-P-0870-01A
        • Dismantling and assembling multiple-disc brake B2 - AR27.50-P-0880A
          • Notes
          • Assembling piston guide and outer multiple-disc carrier of multiple-disc brake - AR27.50-P-0880-01A
          • Inserting and measuring multiple-disc pack B2 - AR27.50-P-0880-02A
        • Dismantling and assembling overdrive clutch - AR27.51-P-0760A
          • Notes
          • Assembling and measuring overdrive clutch - AR27.51-P-0760-01A
        • Disassemble/assemble clutch K1 - AR27.51-P-0800
          • Dismantling and assembling clutch K1 - AR27.51-P-0800A
            • Notes
            • Installing piston K1 outer multi-disc carrier - AR27.51-P-0800-01A
          • Disassemble/assemble clutch K1 - AR27.51-P-0800B
            • Notes
            • Insert and measure multi-disk pack K1 - AR27.51-P-0800-02A
        • Dismantling and assembling clutch K2 - AR27.51-P-0820A
          • Notes
          • Installation of piston K2 in outer multi-disc carrier - AR27.51-P-0820-01A
          • Inserting and measuring multiple-disc pack K2 - AR27.51-P-0820-02A
        • Dismantling and assembling drive shaft with clutch K2 and front gear set - AR27.51-P-0825A
        • Disassemble and assemble clutch K3. - AR27.51-P-0830A
          • Notes
          • Inserting and measuring multi-disk pack K3 - AR27.51-P-0830-01A
        • Flush out oil cooler lines and oil cooler - AR27.55-P-0001A
        • Removing and installing wire cable/transmission for parking lock interlock on transmission - AR27.60-P-0500
          • Removing and installing wire cable/transmission for parking lock interlock on transmission - AR27.60-P-0500-05A
          • Removing and installing wire cable / transmission for parking shift lock on transmission - AR27.60-P-0500-05B
        • Remove/install floor selector and center shift - AR27.60-P-0900
          • Removal and installation of center shift - AR27.60-P-0900A
          • Remove/install floor selector - AR27.60-P-0900B
        • Adjust shift lock - AR27.60-P-0910A
        • Dismantling and assembling center/floor shift - AR27.60-P-0920
          • Dismantling and assembling center shift - AR27.60-P-0920A
            • Notes
            • Removing and installing selector lever handle - AR27.60-P-0920-01A
          • Disassembling and assembling floor shift - AR27.60-P-0920B
        • Remove/install selector lever - AR27.60-P-0930A
        • Removal and installation of operating lever with wire cable for parking lock interlock - AR27.60-P-0940A
        • Remove/install park pawl mechanism - AR27.60-P-0950A
        • Adjusting parking lock interlock - AR27.60-P-0960A
        • Adjusting wire cables for parking lock interlock - AR27.60-P-0965
          • Adjusting wire cables for parking lock interlock - AR27.60-P-0965A
          • Adjusting wire cables for parking lock interlock - AR27.60-P-0965B
        • Adjusting shift rod - AR27.60-P-0980A
        • Removing and installing wire cable for parking lock interlock - AR27.60-P-1000
          • Removing and installing wire cable for parking lock interlock - AR27.60-P-1000A
          • Removing and installing wire cable for parking lock interlock - AR27.60-P-1000B
    • Overall Vehicle -- 129 Chassis
      • General Information
        • Notes on self-locking nuts and bolts - AH00.00-N-0001-01A
        • Notes on performance correction - AH00.10-P-2010
          • Notes on performance correction - AH00.10-P-2010-01A
          • Correction tables for calculating actual performance value - AH00.10-P-2010-02A
        • Notes on wires/plugs - AH00.19-P-1000
          • Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
          • Repair methods for wiring harnesses - AH00.19-P-1000-04A
          • Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
          • Notes regarding plug connections - AH00.19-P-1000-06A
          • Notes on soft soldering - AH00.19-P-1000-07A
          • Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
          • Notes on crimping - AH00.19-P-1000-09A
          • Notes on soldering - AH00.19-P-1000-10A
          • Notes on cable protection - AH00.19-P-1000-11A
      • Basic Knowledge
        • Female contacts and contact pins, installation survey, as-built configuration - GF00.19-P-7000A
        • Plugs and couplings as-built configuration - GF00.19-P-8000A
      • Safety Precautions
        • Risk of injury caused by pinching or jamming when working on loaded springs or spring bodies - AS00.00-Z-0001-01A
        • Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
        • Risk of death. Death may occur If body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
        • Risk of accident & Risk of injury - AS00.00-Z-0005-01A
        • Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
        • Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
        • Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
        • Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. - AS00.00-Z-0011-01A
        • Risk of injury & Rick of poisoning - AS00.00-Z-0013-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0001-01A
        • Risk of injury & Risk of poisoning - AS00.19-Z-0002-01A
      • Self-Diagnostic System
        • Connecting and using test equipment - AD00.00-P-1000AZ
        • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03A
          • Connecting Hand-Held Tester (HHT), reading out fault memory - AD00.00-P-2000-03B
          • Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A
        • Explanation of diagnostic symbols - AD00.00-P-2001A
        • Diagnosis assignment - AD00.00-P-2002A
        • Connect diagnosis testing equipment - AD00.00-P-2003A
        • Diagnostic procedure - AD00.00-P-2004A
      • Testing & Repair
        • Testing and repair work: Passenger cars: Overall vehicle - AR00.00-Z-9129AA
        • Testing and repair work: Passenger cars - AR00.01-Z-9129AA
        • Repair wiring harness as per specified repair method - AR00.19-P-0001A
        • General repair methods for wiring harness. - AR00.19-P-0100A
          • Notes
          • Repair wiring harness by crimping - AR00.19-P-0100-03A
          • Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
          • Repairing cable harness by soldering - AR00.19-P-0100-05A
          • Repair wiring harnesses using rapid connection technology - AR00.19-P-0100-06A
          • Protect repair area after cable repairs - AR00.19-P-0100-08A
          • Protect repair area after cable repairs - AR00.19-P-0100-08B
          • Protect repair area after cable repairs - AR00.19-P-0100-08C
          • Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
        • Removing contacts from plugs and connectors - AR00.19-P-0120A
          • Notes
          • Remove contacts from sensor spade-type contact plug - AR00.19-P-0120-01A
          • Remove contacts from sensor laminated contact plug - AR00.19-P-0120-01B
          • Remove contacts from sensor spade-type contact coupling - AR00.19-P-0120-02A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-02B
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03A
          • Remove contacts from micro quadlock system plug - AR00.19-P-0120-03B
          • Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
          • Remove contacts from Micro Quadlock System coupling - AR00.19-P-0120-04B
          • Remove contacts from E 95 coupling - AR00.19-P-0120-05A
          • Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
          • Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
          • Remove contacts from Junior Power Timer plug - AR00.19-P-0120-08A
          • Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
          • Remove contacts from standard power timer coupling - AR00.19-P-0120-10A
          • Remove contacts from spade-type sensor contact coupling - AR00.19-P-0120-12A
          • Remove contacts from spade-type sensor contact plug - AR00.19-P-0120-13A
          • Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
          • Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
          • Remove contacts from 2.5 round plug contact plug - AR00.19-P-0120-16A
          • Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
          • Remove contacts from 2.5 solder contact plug round plug contact - AR00.19-P-0120-18A
          • Remove contacts from spade-type contact system coupling - AR00.19-P-0120-19A
          • Remove contacts from spade-type contact system plug - AR00.19-P-0120-20A
          • Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
          • Remove contacts from Siemens ELO plug - AR00.19-P-0120-24A
          • Remove contacts from mini spade-type contact coupling - AR00.19-P-0120-26A
          • Remove contacts from mini spade-type contact plug - AR00.19-P-0120-27A
        • Performing basic programming - AR00.19-P-0200A
      • Capacities & Specifications
        • Viscosity classes of engine oils (car engines) - BB00.40-P-0224-01A
        • Multigrade engine oils - BB00.40-P-0229
          • Multigrade engine oils (Sheet 229.1) - BB00.40-P-0229-01A
          • Multigrade engine oils (Sheet 229.3) - BB00.40-P-0229-03A
          • Multigrade engine oils (Sheet 229.5) - BB00.40-P-0229-05A
        • Hypoid gear oils - BB00.40-P-0235
          • Hypoid gear oils (SAE 90, 85 W-90) - BB00.40-P-0235-00A
          • Universal hypoid gear oils - BB00.40-P-0235-07A
        • Steering gear oils (ATF) - BB00.40-P-0236-03A
        • Liquid grease (NLGI grades 00/000) - BB00.40-P-0264-00A
        • High temperature antifriction bearing grease (NLGI grade 2) - BB00.40-P-0265-01A
        • Long-life grease (NLGI grade 2) - BB00.40-P-0266-02A
        • Multipurpose grease (NLGI Class 2) - BB00.40-P-0267-00A
        • Leaf spring grease - BB00.40-P-0268-00A
        • Complex grease (NLGI grade 2) - BB00.40-P-0269-02A
        • Coolant specifications - BB00.40-P-0310-01A
        • Anticorrosion/antifreeze agents (Sheet 325.0) - BB00.40-P-0325-00A
        • General brake fluid - BB00.40-P-0330-01A
        • Brake fluids (DOT 4 plus) - BB00.40-P-0331-00A
        • Hydraulic oils (Specification 343.0) - BB00.40-P-0343-00A
        • Compressor oils - BB00.40-P-0362-00A
      • Miscellaneous Notes
        • Notes on scrapping gas-filled hydraulic components - OS00.00-P-1000-01A
    • Removal & Installation - A/T
      • Application
      • Removal & Installation
        • Notes
        • Transmission
          • Notes
          • C230, C280, C43, CL500 (1999), CLK320, CLK430, E300 Turbo Diesel, E320, E430, E55, S420, S500 (1999) & SL500
          • Cl500 (2000), S430 & S500 (2000)
          • Ml320, Ml430 & Ml55
      • Torque Specifications
    • Servicing - A/T
      • Application
      • Lubrication
        • Service Intervals
        • Checking Fluid Level
        • Recommended Fluid
        • Fluid Capacities
        • Draining & Refilling
      • Adjustments
        • Shift Linkage
          • Except CL500 (2000), S430 & S500 (2000)
          • Cl500 (2000), S430 & S500 (2000)
        • Shift Lock
      • Torque Specifications
    • Shift Interlock Systems
      • Identification
      • Description & Operation
        • Shift Interlock System
          • Steering Lock
          • Parking Lock Interlock
      • Trouble Shooting
      • Adjustments
        • Shift Interlock Cables
          • Steering Lock Cable & Parking Lock Interlock Cable With Adjusters At Brake Pedal
          • Steering Lock Cable & Parking Lock Interlock Cable With Adjuster At Transmission
      • Removal & Installation
        • Shift Interlock Cable
          • Notes
          • Steering Lock Cable
          • Parking Lock Interlock Cable With Adjuster At Transmission
          • Parking Lock Interlock Cable With Adjuster At Brake Pedal
      • Wiring Diagrams
  • Clutch
    • Clutch -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Clutch - AR25.00-Z-9129AA
        • Checking clutch disk for wear when installed - AR25.10-P-0020A
        • Remove/install clutch - AR25.10-P-0050A
          • Notes
          • Checking pressure plate and clutch plate - AR25.10-P-0050-01A
        • Move back adjusting ring of self-adjusting clutch - AR25.10-P-0100-01GC
        • Bleeding the clutch actuation - AR25.20-P-0070A
        • Removing and installing master cylinder - AR25.20-P-0100A
        • Removing and installing slave cylinder - AR25.20-P-0150A
    • Pedal Assembly -- 129 Chassis
      • Testing & Repair
        • Testing and repair work: Passenger cars: Pedal assembly - AR29.00-Z-9129AA
        • Removal and installation of foot controls - AR29.10-P-0300A
        • Dismantling and assembling foot controls - AR29.10-P-0350A
  • Hydraulic Diagrams - 722.6 Series/W5A580
    • Hydraulic Diagrams - 722.6 Series/W5A580
  • Manual Transmission -- 129 Chassis
    • Testing & Repair
      • Removal and installation of transmission - AR26.10-P-0020A
• External Pages