Customer Supplied 2 Or More Valid Keys
- Cut new transponder equipped key(s), if necessary. After PCM is replaced. Using valid first key, turn ignition switch to ON position. SECURITY light should illuminate for 1-2 seconds. Turn valid key to LOCK position.
- Using valid first key, turn ignition switch to ON position, then LOCK position 6 times. DO NOT leave key in either position for more than one second. Ensure sixth turning is done within one second. Remove valid first key.
- Using valid second key, turn ignition switch to ON position. SECURITY light should illuminate for 1-2 seconds. Turn valid second key to LOCK position and remove key.
- Using valid first key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn valid first key to LOCK position and remove key.
- Repeat step 4 with additional valid key or new third key. Repeat step 4 with each new key, up to 8 keys total. Waiting 30 seconds will cause program to quit automatically.