Mixture Formation -- Self-Diagnostic System -- 209 Chassis

• Self-Diagnostic System
  • ME-SFI fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000
    • ME-SFI fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000AC
      • Notes
      • Hot-film mass-air sensor ME-SFI - fault code description - AD07.61-P-4000-01AA
      • Pressure sensor ME-SFI - fault code description - AD07.61-P-4000-02L
      • Intake air temperature sensor ME-SFI - fault code description - AD07.61-P-4000-03L
      • Coolant temperature sensor ME-SFI - fault code description - AD07.61-P-4000-04L
      • Coolant temperature sensor ME-SFI - fault code description - AD07.61-P-4000-04LA
      • O2 sensor signal - fault code description ME - AD07.61-P-4000-06AA
      • O2 sensor signal - fault code description ME - AD07.61-P-4000-06AB
      • Aging of O2 sensor upstream of TWC - fault code description ME - AD07.61-P-4000-07AA
      • Aging of O2 sensor upstream of TWC - fault code description ME - AD07.61-P-4000-07AB
      • O2-sensor heating - fault code description ME-SFI - AD07.61-P-4000-08AA
      • O2-sensor heating - fault code description ME - AD07.61-P-4000-08AB
      • Self-adaptation of mixture formation at its limit -fault code description ME-SFI - AD07.61-P-4000-09AA
      • Self-adaptation of mixture formation at its limit -fault code description ME-SFI - AD07.61-P-4000-09AB
      • Self-adaptation of mixture formation at its limit -fault code description ME-SFI - AD07.61-P-4000-09AC
      • Fault code description for fuel injection valves, ME-SFI - AD07.61-P-4000-10AA
      • Misfires - fault code description - ME - AD07.61-P-4000-11AA
      • Misfires - fault code description - ME - AD07.61-P-4000-11AB
      • Knock sensor ME - fault code description - AD07.61-P-4000-12AA
      • Fault code description for crankshaft position sensor, ME-SFI - AD07.61-P-4000-13L
      • Camshaft Hall sensor - fault code description ME - AD07.61-P-4000-14AA
      • Camshaft Hall sensor - fault code description ME-SFI - AD07.61-P-4000-14V
      • ME secondary air injection malfunction (causal chain) - fault code description - AD07.61-P-4000-15AA
      • Fault code description - three-way catalytic converter effectiveness too low - AD07.61-P-4000-16AA
      • Regeneration system leaking (causal chain) ME-SFI - fault code description - AD07.61-P-4000-17L
      • Fault code description for purge control valve, ME - AD07.61-P-4000-19L
      • Activated charcoal canister shut-off valve ME-SFI - fault code description - AD07.61-P-4000-20L
      • Tank pressure sensor ME - fault code description - AD07.61-P-4000-21L
      • Tank pressure sensor ME - fault code description - AD07.61-P-4000-21LA
      • Idle speed control - fault code description ME - AD07.61-P-4000-24L
      • Gear implausible or leak in transmission, ME-SFI fault code description - AD07.61-P-4000-27L
      • Command valve jams in pressure position, ME-SFI fault code description - AD07.61-P-4000-28L
      • ETC control unit, ME-SFI fault code description - AD07.61-P-4000-29L
      • Supply voltage for valves - fault code description ME - AD07.61-P-4000-30L
      • Supply voltage and function of rpm sensors -fault code description ME - AD07.61-P-4000-31L
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32AA
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32AB
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32AC
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LA
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LB
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LC
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LD
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LE
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LF
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LG
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LH
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LJ
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LK
      • CAN fault detection ME - fault code description - AD07.61-P-4000-32LL
      • Gear position comparison negative (on multiple occasions) - fault code description ME - AD07.61-P-4000-33L
      • Torque converter lockup clutch - fault code description ME - AD07.61-P-4000-34L
      • Pulse width modulation solenoid valve for torque converter lockup - fault code description ME - AD07.61-P-4000-35L
      • Modulating pressure control solenoid valve -fault code description ME - AD07.61-P-4000-36L
      • Shift pressure control solenoid valve - fault code description ME - AD07.61-P-4000-37L
      • Solenoid valve 1-2/4-5 for shift mechanism -fault code description ME - AD07.61-P-4000-38L
      • Solenoid valve 2-3 for shift mechanism - fault code description ME - AD07.61-P-4000-39L
      • Solenoid valve 3-4 for shift mechanism - fault code description ME - AD07.61-P-4000-40L
      • Anti-knock control in the hardware fault control unit, ME-SFI fault code description - AD07.61-P-4000-41AA
      • Pedal value sensor, ME-SFI fault code description - AD07.61-P-4000-45L
      • Throttle valve actuator, ME-SFI fault code description - AD07.61-P-4000-49L
      • Throttle valve actuator, ME-SFI fault code description - AD07.61-P-4000-49LA
      • Throttle valve actuator, ME-SFI fault code description - AD07.61-P-4000-49LB
      • Exhaust gas recirculation malfunction (function chain), ME-SFI fault code description - AD07.61-P-4000-50AA
      • EGR [ARF] pressure transducer, ME-SFI fault code description - AD07.61-P-4000-51AA
      • ME-SFI control unit voltage supply - fault code description - AD07.61-P-4000-59L
      • Oil sensor, ME-SFI fault code description, - AD07.61-P-4000-60L
      • Crash signal implausible, ME-SFI fault code description - AD07.61-P-4000-62L
      • EIS control unit, ME-SFI fault code description - AD07.61-P-4000-63L
      • Fuel tank fill level, ME-SFI fault code description - AD07.61-P-4000-64L
      • Air conditioning (AC) system, ME-SFI fault code description - AD07.61-P-4000-65L
      • ESP control unit, ME-SFI fault code description - AD07.61-P-4000-66L
      • Transmission variant implausible, ME-SFI fault code description - AD07.61-P-4000-67L
      • Air injection relay, ME-SFI fault code description - AD07.61-P-4000-69L
      • Coolant antiboil protection, ME-SFI fault code description - AD07.61-P-4000-70L
      • Electric suction fan, ME-SFI fault code description - AD07.61-P-4000-71L
      • Sensor O2cconnectors swapped, ME-SFI fault code description - AD07.61-P-4000-72L
      • Cruise control switch, ME-SFI fault code description - AD07.61-P-4000-73L
      • Safety fuel shutoff detected, ME-SFI fault code description - AD07.61-P-4000-74L
      • Coolant thermostat, ME-SFI fault code description - AD07.61-P-4000-76L
      • Angle deviation of camshaft relative to crankshaft, ME-SFI fault code description - AD07.61-P-4000-77A
      • Air pump switchover valve, ME-SFI fault code description - AD07.61-P-4000-78A
      • Variable intake manifold switchover valve, ME-SFI fault code description - AD07.61-P-4000-81A
      • Active load limitation, ME-SFI fault code description - AD07.61-P-4000-82AA
      • ME-SFI control unit, ME-SFI fault code description - AD07.61-P-4000-91L
    • ME fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000BC
      • Notes
      • Hot-film mass-air sensor ME-SFI - fault code description - AD07.61-P-4000-01BA
      • Fault code description for fuel injection valves, ME-SFI - AD07.61-P-4000-10BA
      • Misfires - fault code description - ME - AD07.61-P-4000-11BA
      • Misfires - fault code description - ME - AD07.61-P-4000-11BB
    • ME-SFI fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000V
      • Notes
      • Hot-film mass-air sensor ME-SFI - fault code description - AD07.61-P-4000-01V
      • Pressure sensor ME-SFI - fault code description - AD07.61-P-4000-02V
      • Pressure sensor ME-SFI - fault code description - AD07.61-P-4000-02VA
      • Intake air temperature sensor ME-SFI - fault code description - AD07.61-P-4000-03V
      • Coolant temperature sensor ME-SFI - fault code description - AD07.61-P-4000-04V
      • Coolant temperature sensor ME-SFI - fault code description - AD07.61-P-4000-04VA
      • O2 sensor signal, fault code description ME - AD07.61-P-4000-06V
      • O2 sensor signal, fault code description ME - AD07.61-P-4000-06VA
      • O2 sensor signal, fault code description ME - AD07.61-P-4000-06VB
      • O2 sensor signal, fault code description ME - AD07.61-P-4000-06VC
      • O2 sensor signal, fault code description ME - AD07.61-P-4000-06VD
      • O2-sensor heating - fault code description ME-SFI - AD07.61-P-4000-08V
      • O2-sensor heating - fault code description ME-SFI - AD07.61-P-4000-08VA
      • O2 sensor heating - fault code description ME-SFI - AD07.61-P-4000-08VB
      • Self-adaptation of mixture formation at its limit - fault code description ME-SFI - AD07.61-P-4000-09V
      • Self-adaptation of mixture formation at its limit - fault code description ME-SFI - AD07.61-P-4000-09VA
      • Self-adaptation of mixture formation at its limit - fault code description ME-SFI - AD07.61-P-4000-09VB
      • Fault code description for fuel injection valves, ME-SFI - AD07.61-P-4000-10V
      • Fault code description - ME-SFI - misfires - AD07.61-P-4000-11V
      • Knock sensor ME - fault code description - AD07.61-P-4000-12V
      • ME secondary air injection malfunction (causal chain) - fault code description - AD07.61-P-4000-15V
      • Fault code description - three-way catalytic converter effectiveness too low - AD07.61-P-4000-16V
      • Regeneration system leaking (causal chain) ME-SFI - fault code description - AD07.61-P-4000-17V
      • Fault code description for purge control valve, ME-SFI - AD07.61-P-4000-19V
      • Fault code description for purge control valve, ME-SFI - AD07.61-P-4000-19VA
      • Activated charcoal canister shut-off valve ME-SFI - fault code description - AD07.61-P-4000-20V
      • Activated charcoal canister shut-off valve ME-SFI - fault code description - AD07.61-P-4000-20VA
      • Tank pressure sensor ME-SFI - fault code description - AD07.61-P-4000-21V
      • Tank pressure sensor ME-SFI - fault code description - AD07.61-P-4000-21VA
      • CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32V
      • CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32VA
      • Actual value potentiometer in the throttle valve actuator ME-SFI - fault code description - AD07.61-P-4000-48V
      • Actual value potentiometer in the throttle valve actuator ME-SFI - fault code description - AD07.61-P-4000-48VA
      • Throttle valve actuator ME-SFI - fault code description - AD07.61-P-4000-49V
      • Throttle valve actuator ME-SFI - fault code description - AD07.61-P-4000-49VA
      • Throttle valve actuator ME-SFI - fault code description - AD07.61-P-4000-49VB
      • ME-SFI control unit voltage supply - fault code description - AD07.61-P-4000-59V
      • Coolant thermostat - fault code description, ME-SFI - AD07.61-P-4000-76V
      • Coolant thermostat - fault code description, ME-SFI - AD07.61-P-4000-76VA
      • Air pump switchover valve - fault code description, ME-SFI - AD07.61-P-4000-78V
      • Ignition coil - fault code description ME - AD07.61-P-4000-87V
      • ME-SFI control unit - fault code description, ME-SFI - AD07.61-P-4000-91V
      • ME-SFI control unit - fault code description, ME-SFI - AD07.61-P-4000-91VA
      • ME-SFI control unit - fault code description, ME-SFI - AD07.61-P-4000-91VB
      • Continuous camshaft adjustment - fault code description ME - AD07.61-P-4000-94V
      • Continuous camshaft adjustment - fault code description ME - AD07.61-P-4000-94VA
  • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001
    • Air pump relay, fault code description, ME - AD07.61-P-4001-12V
    • Accelerator pedal sensor, fault code description, ME - AD07.61-P-4001-13V
    • Crankshaft Hall sensor, fault code description, ME - AD07.61-P-4001-14V
    • Position sensor for tumble flap, fault code description, ME - AD07.61-P-4001-15V
    • Intake manifold tumble flap switchover valve, fault code description, ME - AD07.61-P-4001-16V
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17V
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VA
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VB
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VC
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VD
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VE
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VF
    • Transmission fault which effects the exhaust, fault code description, ME - AD07.61-P-4001-17VG