LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2003 >> CLK55 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Procedures >> General Information On Chassis Alignment >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Information On Chassis Alignment: Notes

  1. Drive vehicle onto electronic alignment system. Ensure ignition switch is in OFF position. Unlock rotary and sliding plates. Install brake pedal winch on brake pedal. Attach measuring headed to each wheel. Perform initial measurement. Check vehicle level at front and rear axle and adjust as necessary. See RIDING HEIGHT ADJUSTMENTS  .
  2. Perform alignment procedure as follows:
    • Check and adjust toe-in at rear axle.
    • Check camber at rear axle.
    • Check and adjust camber and caster on front axle. If axle camber is not within specification, problem may be caused by too great a difference in vehicle level between left and right side of vehicle or accident damage. If vehicle was damaged in an accident, toe-in may be out of specification also.
    • Check and adjust toe-in at front axle.
  3. Remove measuring heads and brake pedal winch. Test drive vehicle.
scientia non olet · About LEMON Manuals