LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2007 >> E320 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission -- Basic Knowledge >> Basic Knowledge >> Transmission control, function - GF27.60-P-2002N
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission control, function - GF27.60-P-2002N

TRANSMISSION 722.9 in MODEL 215, 220 

TRANSMISSION 722.9 in MODEL 171.4, 203, 230 (except 171.473/44) except CODE (428) Steering wheel shift buttons up to Model Year 8 

TRANSMISSION 722.9 in MODEL 463.303/340/341 

TRANSMISSION 722.9 in MODEL 209, 211, 219 except CODE (428) Steering wheel shift buttons 

The transmission control is dived into electronic and hydraulic transmission control.

While the electronic transmission control takes over the gear selection and adaptation of pressures to the torque to be transmitted, the power supply of the transmission is controlled via the hydraulic elements of the electrohydraulic control unit. The oil supply to the hydraulic elements, such as the hydrodynamic torque converter, the shift elements and the hydraulic transmission control, is provided by way of an oil pump connected to the torque converter.

The fully integrated transmission control (VGS) makes possible precise adaptation of pressures to the respective operating conditions and to the engine output during the shift phase which results in a significant increase in shift quality.

It is possible to reach the engine RPM limit in the individual gears using full throttle and kickdown.

The shift range can be changed in the forwards gears while driving, however the fully integrated transmission control (VGS) prevents an unacceptably high engine speed by means of a downshift lockout device The VGS also offers an additional advantage of flexible adaptation to different vehicle and engine variants. The driver can choose between the two transmission modes "S" (sport program) and "C" (comfort program). These also provide different gear ratios for reverse gear.

The fully integrated transmission control (VGS) control unit (Y3/8n4) monitors and shifts depending on:

VGS control unit, location/task GF27.19-P-4013N 
Electric control unit, location/task/design/function GF27.19-P-5104N 
Kick-down simulator, location/task GF27.10-P-5108N 
Selection range sensor, location/task GF27.19-P-5142N 
Transmission oil temperature sensor, location/task/design GF27.19-P-4014N 
Location/task/function of RPM sensor GF27.19-P-5127N 
Oil pump, location/task/design/function GF27.10-P-5103N