ME-SFI idle, function - GF07.61-P-2006MAS
ENGINE 156.984 in MODEL 216.377, 221.077 /177 as of Model Year 2009 /AEJ 08
Function requirements for neutral, general points
- Circuit 87M ON (engine control ON)
- Engine running (engine speed >700 rpm)
- Accelerator not operated
Neutral, general points
The following partial functions are active in neutral and are described in the following documents:
- ME fuel supply, function
- ME injection regulation, function
- Motor electronics (ME) ignition system, function
- ME Start, post-start phase and warm-up enrichment, function
- ME-SFI idle speed control function
- ME-SFI alternator interface function
- ME engine speed signal, function
- ME-SFI safety fuel shutoff, function
- ME-SFI lambda control, function
- ME-SFI two-sensor control, function
- ME oxygen sensor heater, function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis, function
- ME thermal management, function
- ME engine torque requests, function
- Camshaft adjustment, function
- ME knock control, function
- Overheating/pinging protection, function
- Air injection, function
- ME-SFI electronic accelerator, function
- Electronic accelerator pedal emergency running mode, function
- Purge function
- System purging with leak test function (with code (494) USA version)
- Monitoring catalytic converter efficiency, function
| ME fuel supply, function | GF07.61-P-3004MAS | |
|---|---|---|
| ME injection regulation, function | GF07.61-P-3002MAS | |
| Motor electronics (ME) ignition system, function | GF07.61-P-3008MAS | |
| ME Start, post-start phase and warm-up enrichment, function | GF07.61-P-3014MAS | |
| ME-SFI idle speed control function | GF07.61-P-2008MAS | |
| ME-SFI alternator interface function | GF07.61-P-3003MAS | |
| ME engine speed signal, function | GF07.61-P-3017MAS | |
| ME-SFI safety fuel shutoff, function | GF07.61-P-3018MAS | |
| ME-SFI lambda control, function | GF07.61-P-4022MAS | |
| ME-SFI two-sensor control, function | GF07.61-P-3020MAS | |
| ME oxygen sensor heater, function | GF07.61-P-3024MAS | |
| Self-adjustment of mixture formation, function | GF07.10-P-1029MAS | |
| Smooth engine running analysis, function | GF07.10-P-1030MAS | |
| ME thermal management, function | GF07.61-P-4012MAS | |
| ME engine torque requests, function | GF07.61-P-4013MAS | |
| Camshaft adjustment, function | GF07.61-P-4021MAS | |
| ME knock control, function | GF07.61-P-4031MAS | |
| Overheating/pinging protection, function | GF07.61-P-4027MAS | |
| Air injection, function | GF14.30-P-3012MAS | |
| ME-SFI electronic accelerator, function | GF30.20-P-3012MAS | |
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026MAS | |
| Purge function | GF47.30-P-3015MAS | |
| Purge system with leak test function | With code (494) USA version | GF47.30-P-3016MAS |
| Monitoring catalytic converter efficiency, function | GF49.10-P-3033MAS |