LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2009 >> E320 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation >> Basic Knowledge >> CDI tank protection function - GF07.16-P-3019P
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CDI tank protection function - GF07.16-P-3019P

ENGINES 642.9 in MODEL 209.3/4, 211.0/2/6, 219.3 

ENGINES 642.8/9 in MODEL 461.3 

ENGINES 642.9 in MODEL 463.3 

ENGINES 642.9 in MODEL 164.1/8, 203.0/2, 204.0/2, 221.0/1, 251.0/1 up to model year 2008/YoM 07 

Increasing the fuel pressure by 4.5 bar up to 1600 bar using the common rail high pressure pump also causes the fuel temperature to increase. To protect the fuel tank from overheating, the CDI control unit (N3/9) reads the fuel temperature sensor (B50) (model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463) or the fuel temperature sensor (B50) (model 204.0/2) and thus monitors the temperature of the fuel supplied to the common rail high-pressure pump. If the temperature of the fuel delivered to the common rail high pressure pump goes above 90°C the injection quantity and rail pressure are automatically reduced. This causes the fuel less to be less compressed. The quantity control valve (Y94) diverts excess fuel back into the tank.

If the temperature of the fuel supplied to the common rail high-pressure pump falls below 90°C, the tank protection function is deactivated by the CDI control unit.

Component description for the rail pressure sensor Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
B4/6
GF07.04-P-6210P 
Model 204.0/2
B4/6
GF07.04-P-6210CO
Component description for the quantity control valve Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
Y94
GF07.05-P-6010P 
Model 204.0/2
Y94
GF07.05-P-6010CO
Pressure regulator valve, component description Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
Y74
GF07.05-P-6020P 
Model 204.0/2
Y74
GF07.05-P-6020CO
Component description for CDI control unit Model 203, 209
N3/9
GF07.16-P-6000P
Model 211, 219
N3/9
GF07.16-P-6000T 
Model 164, 463
N3/9
GF07.16-P-6000GZ
Model 221
N3/9
GF07.16-P-6000SX
Model 251
N3/9
GF07.16-P-6000RT
Model 204.0/2
N3/9
GF07.16-P-6000CO
Model 461
N3/9
GF07.16-P-6000GX
Component description for the fuel temperature sensor Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
B50
GF47.50-P-2010P
Component description for fuel temperature sensor Model 204.0/2
B50
GF47.50-P-2011CO