Technical Bulletins: Campaigns

Accessories & Equipment
- Update Digital Operator's Manual And Enclose Printed Operator's Manual, Replace If Necessary (P-SC-2024070020)
Accessories Control Systems
- Service Campaign 2020110018 - Update Pass Control Unit Software (P-SC-2020110018)
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
- Recall Campaign 2015030005 - Rear Side Marker Lamps, SCN Code The Rear SAM (2015030005)
Anti-Theft Systems
- Ordering A Programmed Key When No Keys Are Present - "The Fallback Process" (S-B-80.57/62H)
Axle Shafts
- Check Front Axle Stabilizer; Replace If Necessary (P-SC-2022100012)
Body Interior
- Update Powertrain And Instrument Cluster Control Unit Software (P-SC-2022110009)
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
- Recall Campaign 2015030005 - Rear Side Marker Lamps, SCN Code The Rear SAM (2015030005)
Communication Devices
- Service Campaign 2019120008 - Update Emergency Call Control Unit Software (P-RC-2019120008)
Engine Control Systems
- Service Campaign 2022080005 - Perform Engine Control Unit Software Update (P-SC-2022080005)
- Service Campaign 2019040001 - Update Engine Electronics (Me-SFI) Control Unit Software (P-SC-2019040001)
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
Exterior Body Panels
- Recall Campaign 2015020001 - Secondary Rubber Hood Seal, Model 212 (E-Class) (2015020001)
Exterior Lights
- Check Gap Dimension Of Fender To Left And Right Tail Lamp, Rework If Necessary (P-SC-2023040014)
- Recall Campaign 2015030005 - Rear Side Marker Lamps, SCN Code The Rear SAM (2015030005)
Frames, Subframes & Crossmembers
- Service Campaign Bulletin 2014020004 - Check Weld Seam At Rear Axle Cross Member At Left And Right, Rework If Necessary (2014020004)
Gauges & Instrument Panels
- Update Powertrain And Instrument Cluster Control Unit Software (P-SC-2022110009)
Ignition Switch/Steering Lock
- Perform SCN Coding In N73 Electronic Ignition Lock Control Unit (P-SC-2022110004)
Interior/Exterior Trim
- Recall Campaign 2015020001 - Secondary Rubber Hood Seal, Model 212 (E-Class) (2015020001)
None
- Check Air Bellows Of Upper Front Axle Transverse Control Arm On Both Sides, Replace Transverse Control Arm If Necessary (P-SC-2022100010)
Restraints Control Systems
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
Starter
- Service Campaign 2018060013 - CLS-Class (218 Platform) Model Year 2014 - Retrofit Spacer Ring On Starter Wiring Harness (P-SC-2018060013)
Steering Control Systems
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
Steering Gear
- Service Campaign 2019080019 - Replace Steering Gear Bolts (P-SC-2019080019)
Suspension Control Systems
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
System
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
Transmission Control Systems
- Recall Campaign 2017030015 - Perform SCN Coding In Various Control Modules As Per DAS/XENTRY (2017030015)
- Service Campaign 2014050002 - Update Transmission Control Module Software (2014050002)