Accelerator Pedal Sensor, Basic Function - GF30.20-P-2000A
Model All (4xWD, CAR)
Example of accelerator pedal sensor
Overview
This document contains information on:
- General
- Function
- Limp-home mode
General
The accelerator pedal sensor (1) converts the mechanical actuation of the accelerator pedal into a voltage signal that corresponds to the accelerator pedal position.
Function
The accelerator pedal sensor (1) is integrated on the accelerator pedal pivot. The accelerator pedal sensor (1) consists of a shaft with ring magnet. The ring magnet rotates in a printed circuit board with stator in two fixed Hall elements.
This produces a change in the voltage.
Limp-home mode
If the signal voltage of a Hall element fails, the signal voltage of the second Hall element is used and the engine enters limp-home mode.
| Component descriptions | |||
| Accelerator pedal module, component description | Model 223 | GF30.20-P-0001A | |
| Model 206 | GF30.20-P-0001C | ||
| Model 297 | GF30.20-P-0001D | ||
| Model 295 | GF30.20-P-0001E | ||
| Model 232 | GF30.20-P-0001F | ||
| Model 296 | GF30.20-P-0001G | ||
| Model 254 | GF30.20-P-0001 H | ||
| Model 464 | GF30.20-P-0001J | ||
| Model 214 | GF30.20-P-0001 K | ||
| Model 294 | GF30.20-P-0001 N | ||
| Model 192 | GF30.20-P-0001 R | ||
| Accelerator pedal switch, component description | Model 243 | GF30.20-P-1000B | |
| Component description for the accelerator pedal sensor | Model 243 | GF30.20-P-2011B | |
| Model 118, 177, 247 as of model year 2023 | GF30.20-P-2011L | ||
| Model 167 as of model year 2023 |
GF30.20-P-2011M |