Timing Belt: Remove & Replace
WARNING: This page is about the Capri Base, Trans Mfr CD 82ET, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.3L Eng | 1.6 | 1.2 | B | |
| Additional Procedure: TIMING BELT: Remove & Replace: | ||||
| 2.3L Eng, If necessary to R&I Pulley add | 0.8 | B | ||
| Combination Procedure: BALANCE SHAFT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: BALANCE SHAFT SPROCKET: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: CAMSHAFT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: CAMSHAFT SPROCKET: Remove & Replace: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: CRANKSHAFT OIL SEAL: Remove & Replace: | ||||
| Front | 0.3 | B | ||
| Combination Procedure: CRANKSHAFT SPROCKET: Remove & Replace: | ||||
| 0.2 | B | |||