Ignition System: Distributor: Installation

To install, reverse removal procedure. Install new "O" ring if damaged or worn. Insert distributor and rotate until offset drive tangs engage camshaft slots. See Fig 1 , Fig 2 or Fig 3 . Check and adjust timing as required.

NOTE: On Festiva, DO NOT disassemble distributor. Entire unit is serviceable only by complete replacement.

Fig 1: Exploded View of Distributor Assembly (Festiva)

Courtesy of FORD MOTOR CO.

Fig 2: Exploded View of Distributor Assembly (Capri Non-Turbo)

Courtesy of FORD MOTOR CO.

Fig 3: Exploded View of Distributor Assembly (Capri Turbo)

Courtesy of FORD MOTOR CO.