Overhead Console Removal
WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the overhead console retaining screws, located in the sunglass storage bin.
- Using your fingertips, grasp the sides of the overhead console and pull straight down evenly to disengage the two snap clips at the front of the unit.
- Lower the overhead console far enough to access the wire harness connectors.
- Disconnect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors.
- Remove the overhead console from the vehicle.