LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Overhead Console) >> Universal Transmitter >> Standard Procedure >> Standard Procedure - Setting Transmitter Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Standard Procedure - Setting Transmitter Codes

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn off the engine.
  2. Erase the codes by pressing the two outside buttons. Release the buttons when the display confirms the operation (about 20 seconds).
  3. Choose one of the three buttons to train. Place the hand-held transmitter within one inch of the universal transmitter and push the buttons on both transmitters.
  4. Release both buttons. Your universal transmitter is now "trained". To train the other buttons, repeat Step  3 and Step  4 . Be sure to keep your handheld transmitter in case you need to retrain the universal transmitter.
scientia non olet · About LEMON Manuals