LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1994 >> Capri Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Ignition Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch Test

  1. Locate ignition switch connector under dash. Using a 12-volt test light or voltmeter, check for battery voltage on Black/White wire when ignition switch is turned to RUN or ON position. This will verify proper operation of ignition switch.
    NOTE: Leave ignition switch connector in place during this test.
  2. If there is no voltage at this wire, problem is either ignition switch or circuit between battery and ignition switch.
scientia non olet · About LEMON Manuals