Single Power Window Switch
Remove single power window switch from door pull cup. Leave switch connected. Turn ignition on. Using voltmeter, measure voltage between ground and indicated wire colors with switch in specified position. See SINGLE POWER WINDOW SWITCH VOLTAGE table. If switch voltages are not as specified, replace single power window switch.
SINGLE POWER WINDOW SWITCH VOLTAGE
| Switch Position | Wire Color | Voltage |
|---|---|---|
| UP | Blue/Yellow | More Than 10 |
| UP | Blue/Orange | Less Than 1 |
| Normal | Blue/Yellow | Less Than 1 |
| Normal | Blue/Orange | Less Than 1 |
| DOWN | Blue/Yellow | Less Than 1 |
| DOWN | Blue/Orange | More Than 10 |