Remote Transmitter
- Ensure anti-theft system is not armed. Turn ignition switch from LOCK to RUN position 8 times within 10 seconds ending in RUN position. The system will indicate entry into program mode by locking and unlocking all doors.
- Press any button on remote transmitter within 20 seconds. Doors will lock and unlock to confirm transmitter has been programmed. Repeat procedure to program additional transmitters.
- Turn ignition switch to LOCK position to exit program mode. If a new set of transmitters have been programed, RAP module will lock and unlock all doors one last time to confirm programing was successful. If system does not program successfully, repeat procedure. If system will not program, repair remote keyless entry system as necessary. See appropriate wiring diagram in REMOTE KEYLESS ENTRY SYSTEMS article in ACCESSORIES & EQUIPMENT.