LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Evaporative Emission System Tests >> Evaporative Emissions System Leak Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Evaporative Emissions System Leak Test

CAUTION: EVAP emission canister must not be pressurized to more than one psi (6.8 kPa) or damage to EVAP emission canister may occur.
NOTE: EVAP test port is located near cowl top vent panel.

Connect Evaporative Emissions System Leak Tester (134-00056) to EVAP test port. Close canister vent solenoid. See CANISTER VENT CONTROL SOLENOID CLOSING PROCEDURE . Follow manufacturer's instructions included with evaporative emissions system leak tester and test evaporative system for leakage.

scientia non olet · About LEMON Manuals