Inspection and Verification
NOTE:
All vehicles are equipped with either memory, or non-memory accelerator and brake pedals. For additional information on diagnosing and testing the adjustable pedal system, refer to BRAKE SYSTEM-GENERAL INFORMATION
.
NOTE:
Care should be exercised when performing service on or around the accelerator pedal linkage and controls.
- Inspect the accelerator pedal and shaft and attaching linkage for damage or distortion which would bind or limit accelerator travel.
- Inspect the accelerator cable for kinks or fraying which may cause binding.
- Inspect the engine idle speed adjustment to make sure of correct idle speed specification after any accelerator linkage adjustment or repair.
- Inspect throttle body for excessive wear or damage.