LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2005 >> Montego Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Configuration System >> Diagnosis And Testing >> Module Configuration >> Principles of Operation >> Definition of Terms >> Calibration Update
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Calibration Update

Calibration update is used to install a new calibration and strategy into a module.

A calibration update should be carried out only upon notification (such as a Technical Service Bulletin [TSB]). Also, if a module sets DTC U2050, this indicates no application is present and reflashing of software application is required. If a module sets DTC U2051, this indicates no calibration is present and reflashing of calibration is required.

NOTE: If calibration fails when calibrating the DSM, disconnect the vehicle battery, wait 1 minute, connect the battery and complete the calibration update.
scientia non olet · About LEMON Manuals