Anti-Lock Control

ANTI-LOCK BRAKE SYSTEM MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Source	Perform Test
B1596	Service Continuous Code	ABS/TC	TURN the ignition switch from OFF to ON. REPEAT the ABS self-test. If any DTCs are retrieved, REFER to the ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DIAGNOSTIC TROUBLE CODE (DTC) INDEX . If no DTCs are retrieved, CARRY OUT a drive test above 15 km/h (9 mph), then REFER to the SYMPTOM CHART .
B1676	Battery Pack Voltage Out of Range	ABS/TC	GO to PINPOINT TEST B .
B1342	ABS Module Internal Failure	ABS/TC	CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a ABS module. REPEAT the self-test.
B1484	Brake Pedal Input Open Circuit	ABS/TC	GO to PINPOINT TEST C .
C1300	ABS Hydraulic Pump Motor Circuit Failure	ABS/TC	GO to PINPOINT TEST D .
C1145	RF Wheel Speed Sensor Input Circuit Failure	ABS/TC	GO to PINPOINT TEST E .
C1155	LF Wheel Speed Sensor Input Circuit Failure	ABS/TC	GO to PINPOINT TEST E .
C1165	RR Wheel Speed Sensor Input Circuit Failure	ABS/TC	GO to PINPOINT TEST E .
C1175	LR Wheel Speed Sensor Input Circuit Failure	ABS/TC	GO to PINPOINT TEST E .
C1222	Wheel Speed Sensor Signal Mismatch	ABS/TC	GO to PINPOINT TEST F .
C1296	LF Wheel Speed Sensor Signal Fault	ABS/TC	GO to PINPOINT TEST F .
C1297	RF Wheel Speed Sensor Signal Fault	ABS/TC	GO to PINPOINT TEST F .
C1298	RR Wheel Speed Sensor Signal Fault	ABS/TC	GO to PINPOINT TEST F .
C1299	LR Wheel Speed Sensor Signal Fault	ABS/TC	GO to PINPOINT TEST F .
C1266	ABS Valve Power Relay Circuit Failure	ABS/TC	GO to PINPOINT TEST G .
U0073	Control Module Communication Bus Off Fault	Network Fault	Refer to MODULE COMMUNICATIONS NETWORK .
U1900	CAN Communication Bus Fault-Receive Error	Network Fault	Refer to MODULE COMMUNICATIONS NETWORK .
U2023	Fault-Receive From External Node	Network Fault	Refer to MODULE COMMUNICATIONS NETWORK .
C1805	Mismatched Powertrain Control Module (PCM) and/or ABS Module	ABS/TC	CARRY OUT the PCM self-test. CHECK for correct PCM and ABS Module part numbers.