Inspection and Verification
- Verify the customer concern by operating the system.
- Visually inspect for obvious signs of mechanical or electrical damage.
- If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
- If the concern is not visually evident, verify the symptom. GO to SYMPTOM TABLE .VISUAL INSPECTION TABLE
Mechanical Electrical - Selector lever cable
- Manual control lever
- Transmission control module out of adjustment (6-speed transaxle)
- Fuse(s):
- C34 (30A)
- C18 (10A)
- Connections
- Wiring harness
- Brake pedal position (BPP) switch
- Shift lock actuator