LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2006 >> Montego Base, FWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Installation

  1. Install the PCM and the bolt.
    • Tighten to 8 N.m (71 lb-in).
  2. Connect the 3 PCM electrical connectors.
  3. Install the cowl panel grille. For additional information, refer to REMOVAL AND INSTALLATION .
  4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION .
  5. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to KEY PROGRAMMING USING TWO PROGRAMMED KEYS .
scientia non olet · About LEMON Manuals