Selector Lever: Removal

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Remove the center console. For additional information, refer to INSTRUMENT PANEL .
Disconnect the selector lever cable end from the selector lever.

Fig 1: Disconnecting Selector Lever Cable End From Selector Lever
Courtesy of FORD MOTOR CO.
Depress the tab on the selector lever cable connector and lift up on the selector lever cable to remove it from the housing.

Fig 2: Identifying Tab On Selector Lever Cable Connector
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector.

Fig 3: Disconnecting Electrical Connector
Courtesy of FORD MOTOR CO.
Disconnect the wire harness from the shifter in 3 locations.

Fig 4: Disconnecting Wire Harness
Courtesy of FORD MOTOR CO.
Remove the RH plastic retaining clip for the carpet.

Fig 5: Removing RH Plastic Retaining Clip
Courtesy of FORD MOTOR CO.
Remove the LH plastic retaining clip for the carpet.

Fig 6: Removing LH Plastic Retaining Clip
Courtesy of FORD MOTOR CO.
Remove the 2 front shifter bolts.

Fig 7: Removing Front Shifter Bolts
Courtesy of FORD MOTOR CO.
Remove the 2 rear shifter bolts and the shifter from the vehicle.

Fig 8: Removing Rear Shifter Bolts

Courtesy of FORD MOTOR CO.