- The safety belt warning indicator lamp does not operate, the safety belt warning chime is OK
|
- Burned-out bulb
- Circuitry (HS-CAN)
- Instrument cluster module
|
|
- Neither the safety belt warning chime nor the safety belt warning indicator lamp operates
|
- Safety belt switch
- Instrument cluster module
- Restraints control module
- Circuitry (HS-CAN)
|
|
- Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract
|
- Front safety belt retractor and pretensioner assembly and tongue
- Second row safety belt retractor and tongue
- Center safety belt retractor and tongue
- Third row safety belt retractor and tongue
|
- CARRY out the component Functional Test. INSTALL a new safety belt retractor if necessary.
|