General Specifications

GENERAL SPECIFICATIONS

Item	Specification
Engine
Displacement	3.5L (4V) (214 CID)
No. cylinders	6
Bore/stroke	92.5/86.7 mm (3.641/3.413 in)
Fire order	1-4-2-5-3-6
Oil pressure	Minimum 30 psi @ 1,500 RPM with engine at normal operating temperature
Compression ratio	10.3:1
Spark plug	AYSF-22FM Gap = 1.29-1.45 mm (0.051-0.057 in)
Engine weight (without accessory drive components)	161 kg (355 lb)
Engine and transaxle assembly weight (without accessory drive components)	260.8 kg (575 lb)
Cylinder Head and Valve Train
Cylinder head gasket surface flatness^a	-
Combustion chamber volume	55.84 cc (3.41 CI)
Valve tappet clearance - intake	0.15-0.25 mm (0.006-0.01 in)
Valve tappet clearance - exhaust	0.300-0.400 mm (0.0118-0.0157 in)
Valve guide bore inner diameter	5.519-5.549 mm (0.217-0.218 in)
Valve stem diameter - intake	5.479-5.497 mm (0.2157-0.2164 in)
Valve stem diameter - exhaust	5.466-5.484 mm (0.2151-0.2159 in)
Valve stem-to-guide clearance - intake	0.022-0.070 mm (0.0008-0.0027 in)
Valve stem-to-guide clearance - exhaust	0.035-0.083 mm (0.0013-0.032 in)
Valve head diameter - intake	36.82-37.18 mm (1.44-1.46 in)
Valve head diameter - exhaust	30.82-31.18 mm (1.21-1.22 in)
Valve face runout	0.05 mm (0.0001 in)
Valve face angle	90.50-91.50 degrees
Valve seat width - intake	1.3-1.5 mm (0.051-0.059 in)
Valve seat width - exhaust	1.4-1.6 mm (0.055-0.062 in)
Valve seat runout	0.04 mm (0.0001 in) MAX
Valve seat angle	89.0-91.0 degrees
Valve spring free length (approx.)	48.4 mm (1.90 in)
Valve spring compression pressure (N @ spec. length)	510 N @ 27.32 mm (115 lbs @ 1.08 in)
Valve spring installed height	37.0 mm (1.45 in)
Valve spring installed height pressure (N @ spec. length)	235 N @ 37.0 mm (53 lbs @ 1.45 in)
Valve spring installed pressure - service limit	10% force loss @ specified height
Camshaft
Theoretical valve lift @ 0 lash	9.6798 mm (0.38 in)
Lobe lift - intake	9.6798 mm (0.38 in)
Lobe lift - exhaust	9.6798 mm (0.38 in)
Allowable lobe lift loss	0.062 mm (0.0024 in)
Camshaft journal bore inside diameter - 1st journal	31.0375-31.0625 mm (1.221-1.222 in)
Camshaft journal bore inside diameter - intermediate journals	25.9875-26.0125 mm (1.023-1.024 in)
Camshaft bearing outside diameter - 1st journal	30.993-31.013 mm (1.2202-1.2209 in)
Camshaft bearing outside diameter - intermediate journals	25.937-25.963 mm (1.021-1.022 in)
Camshaft journal-to-bearing clearance, 1st journal - service limit	0.070 mm (0.0027 in) MAX
Camshaft journal-to-bearing clearance, intermediate journals - service limit	0.0755 mm (0.0029 in) MAX
Runout	0.040 mm (0.0015 in) MAX
End play - standard	0.032-0.170 mm (0.0012-0.0066 in)
End play - service limit	0.190 mm (0.00748 in) MAX
Cylinder Block
Cylinder bore diameter - grade 1	-
Cylinder bore diameter - grade 2	-
Cylinder bore diameter - grade 3	-
Cylinder bore maximum taper	-
Cylinder bore maximum out-of-round - limit	-
Cylinder bore maximum out-of-round - service limit	-
Main bearing bore inside diameter	72.400-72.424 mm (2.8503-2.8513 in)
Head gasket surface flatness	-
Head gasket surface finish	-
Crankshaft
Main bearing journal diameter	67.5 mm (2.657 in)
Main bearing journal maximum taper	0.004 mm (0.00015 in)
Main bearing journal maximum out-of-round	0.006 mm (0.00023 in)
Main bearing journal-to-cylinder block clearance	-
Connecting rod journal diameter	55.983-56.003 mm (2.204-2.205 in)
Connecting rod journal maximum taper	0.004 mm (0.00015 in)
Connecting rod journal maximum out-of-round	0.006 mm (0.00023 in)
Crankshaft maximum end play	0.101-0.291 mm (0.0039-0.0114 in)
Piston and Connecting Rod
Piston diameter - single grade	92.476-92.490 mm (3.6407-3.6413 in)
Piston-to-cylinder bore clearance	0.010 to 0.044 mm (0.0003-0.0017 in)
Piston ring end gap - compression (top, gauge diameter)	0.15-0.25 mm (0.0059-0.0098 in)
Piston ring end gap - compression (bottom, gauge diameter)	0.30-0.55 mm (0.0118-0.0216 in)
Piston ring end gap - oil ring (steel rail, gauge diameter)	0.15-0.45 mm (0.0059-0.0177 in)
Piston ring groove width - compression (top)	1.230-1.25 mm (0.0484-0.0492 in)
Piston ring groove width - compression (bottom)	1.530-1.55 mm (0.0602-0.0610 in)
Piston ring groove width - oil ring	2.53-2.55 mm (0.0996-0.1003 in)
Piston ring width - upper comp ring	1.17-1.19 mm (0.0460-0.0468 in)
Piston ring width - lower comp ring	1.47-1.49 mm (0.0578-0.0586 in)
Piston ring-to-groove clearance (upper and lower compression rings)	0.040-0.080 mm (0.0015-0.0031 in)
Piston pin bore diameter	23.002-23.006 mm (0.9055-0.9057 in)
Piston pin diameter	22.998-23.000 mm (0.9054-0.9055 in)
Piston pin length	55.975 mm (2.203 in)
Piston pin-to-piston fit	0.002 to 0.008 mm (0.00007-0.0003 in)
Piston-to-connecting rod clearance	2.7 mm (0.1 in)
Connecting rod-to-pin clearance - standard	0.007-0.021 mm (0.0002-0.0008 in)
Connecting rod-to-pin clearance - service limit	-
Connecting rod pin bore diameter	23.007-23.019 mm (0.905-0.906 in)
Connecting rod length (center-to-center)	152.68 mm (6.01 in)
Connecting rod maximum allowed bend	0.038 mm (0.0014 in)
Connecting rod maximum allowed twist	0.050 mm (0.0019 in)
Connecting rod bearing bore diameter - grade 1	59.866-59.872 mm (2.3569-2.3571 in)
Connecting rod bearing bore diameter - grade 2	59.873-59.879 mm (2.3572-2.3574 in)
Connecting rod bearing bore diameter - grade 3	59.880-59.886 mm (2.3574-2.3577 in)
Connecting rod bearing-to-crankshaft clearance	-
Connecting rod side clearance (assembled to crank) - standard	0.175-0.425 mm (0.0068-0.0167 in)
Connecting rod side clearance (assembled to crank) - service limit	-

^a Refer to the procedure in this article.