Seating DTCS
DRIVER SEAT MODULE (DSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Retrieved | Perform Test |
|---|---|---|---|
| B1342 | ECU is Faulted | On-Demand and Continuous | INSTALL a new DSM and CARRY OUT programmable module installation (PMI). REFER to MULTIFUNCTION ELECTRONIC MODULES article. |
| B1530 | Memory SET Switch Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1534 | Memory 1 Switch Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1538 | Memory 2 Switch Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1663 | Seat Driver Front Up/Down Motor Stalled | On-Demand | If the motor does not operate, go to Pinpoint Test K . If motor operates, go to Pinpoint Test L . |
| B1664 | Seat Driver Rear Up/Down Motor Stalled | On-Demand | If the motor does not operate, go to Pinpoint Test K . If motor operates, go to Pinpoint Test L . |
| B1665 | Seat Driver Forward/Backward Motor Stalled | On-Demand | If the motor does not operate, go to Pinpoint Test K . If motor operates, go to Pinpoint Test L . |
| B1666 | Seat Driver Recline Motor Stalled | On-Demand | If the motor does not operate, go to Pinpoint Test K . If motor operates, go to Pinpoint Test L . |
| B1703 | Seat Driver Recline Forward Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1707 | Seat Driver Recline Rearward Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1711 | Seat Driver Front Up Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1715 | Seat Driver Front Down Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1719 | Seat Driver Forward Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1723 | Seat Driver Rearward Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1727 | Seat Driver Rear Up Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1731 | Seat Driver Rear Down Switch Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test K . |
| B1952 | Seat Rear Up/Down Position Feedback Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1953 | Seat Rear Up/Down Position Feedback Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1956 | Seat Front Up/Down Position Feedback Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1957 | Seat Front Up/Down Position Feedback Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1960 | Seat Recline Forward/Backward Position Feedback Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1961 | Seat Recline Forward/Backward Position Feedback Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1964 | Seat Horizontal Forward/Rearward Position Feedback Circuit Short to Battery | On-Demand and Continuous | Go to Pinpoint Test L . |
| B1965 | Seat Horizontal Forward/Rearward Position Feedback Circuit Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B2084 | Memory SET Indicator Short to Ground | On-Demand and Continuous | Go to Pinpoint Test L . |
| B2477 | Module Configuration Failure | Continuous |
NOTE:
This DTC indicates PMI has not been done to a newly installed module or configuration data has been lost. Presence of this DTC alone does not prevent basic seat operation from the seat control switch. CARRY OUT PMI on the DSM. REFER to MODULE CONFIGURATION
article. REPEAT the self-test and VERIFY successful PMI. If PMI is successful, the DTC will not be present. |
| U0140 | Lost Communication With Body Control Module (GEM) | Continuous | CLEAR the DTC. REPEAT the self-test. If the DTC is retrieved again, REFER to MODULE COMMUNICATIONS NETWORK article to diagnose the medium-speed communication area network (MS-CAN) concern. |
| U0155 | Lost Communication With Instrument Panel Cluster (IC) Control Module | Continuous | CLEAR the DTC. REPEAT the self-test. If the DTC is retrieved again, REFER to MODULE COMMUNICATIONS NETWORK article to diagnose the MS-CAN concern. |
| U2050 | Application Not Present | Continuous | INSTALL a new driver seat module (DSM) and CARRY OUT PMI. REFER to MULTIFUNCTION ELECTRONIC MODULES article. REPEAT the self-test. |
| All Other DTCs | - | - | REFER to the Master DTC Table in MULTIFUNCTION ELECTRONIC MODULES article. |