Engine Running Self-Test

There are 4 codes displayed during this test. In order of display, these are an Engine ID code, a Dynamic Response code, Fast codes, and On Demand codes.

The first and third codes are not applicable in field tests. The Engine ID codes are displayed as 20, 30, or 40. The first digit is equal to half the number of cylinders in the engine. Fast codes are the same as those run during Key ON/Engine OFF Self-Test. Engine ID codes and Fast codes are used by automatic equipment during manufacturing process.

The Dynamic Response code appears as the numeral 10. This code instructs the technician to open linkage to WOT position momentarily. This checks inside the TPS and MAPS for proper movement. If WOT does not occur within 15 seconds, the numeral (Code) 77 will be displayed. The On Demand codes are "hard faults" found in system outputs during test.