LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Merkur >> 1986 >> XR4Ti Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EEC IV System >> Quick Test >> Continuous Self-Test >> Clearing Continuous Memory Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clearing Continuous Memory Codes

  1. Perform KEY ON/ENGINE OFF SELF-TEST  . When the first service code appears, exit SELF-TEST program by disconnecting STAR tester or by removing jumper wire from Self-Test Input (STI) pigtail. Exiting QUICK TEST in this manner will clear all codes stored in continuous memory.
  2. Repeat KEY ON/ENGINE OFF SELF-TEST  . If code output is 11-10-11, go to CONTINUOUS MEMORY CODES TO BE TESTED. If code output is not correct, check Self-Test Input (STI) circuit for short to ground. Repair short and repeat CLEARING CONTINUOUS MEMORY CODES step.
scientia non olet · About LEMON Manuals