LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Merkur >> 1986 >> XR4Ti Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EEC IV System >> Quick Test >> Engine Running Self-Test >> Code Output
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code Output

  1. Deactivate SELF-TEST (disconnect jumper wire). Start engine and run it at 2000 RPM for 2 minutes to warm up EGO sensor. Turn engine off and wait 10 seconds. Insert jumper to activate SELF-TEST. DO NOT  depress throttle during test unless a Dynamic Response code occurs.
  2. Start engine. The engine ID code will be displayed. Run test. If Dynamic Response code 1 (10 with STAR tester) occurs, briefly accelerate engine to wide open throttle. The ENGINE RUNNING SELF-TEST service codes will then be displayed. Observe and record all codes.