Programmed Defrost Function

The programmed defrost function is activated by a momentary push of the defrost switch.

This function is only available when the engine is running,

0.5 seconds after cranking is completed. The programmed defrost functions as follows:

• AUTO mode off.
• AC stays ON if ON before or OFF if OFF before.
• Fresh/recirculation function is set to fresh air mode.
• Desired temperature will be under manual control.
• Air distribution will be set to DEFROST vents.
• Blower speed 8 selected (depending on battery level).
• Heated rear window and (heated front screen if fitted) is requested on.

The display will show the fan speed at MAX (8 bars), and the desired temperature. The defrost LED will flash at 0.5 Hz to indicate programmed defrost function is active. The programmed defrost function is not automatically recalled after ignition off.

The programmed defrost function is de-activated by the following actions:

• Brief press of the screen distribution switch will cancel the programmed defrost function. The control panel will return to its state prior to selection of programmed defrost.
• Foot or face air distribution mode switches will provide manual air mode operation with all other settings returning to their state prior to selection of programmed defrost and cancel the programmed defrost mode.
• A press of the AUTO switch will restore auto operation of the panel and cancels programmed defrost mode.
• A press of the OFF button will switch the panel off. A subsequent press of the OFF button will switch on the panel and restore the programmed defrost function.
• A long push (>2 second) of the defrost switch will provide manual screen distribution and cancel programmed defrost mode.