Plug-in Connections
PLUG-IN CONNECTIONS - TROUBLESHOOTING CHART
| Symptom | Possible Causes | Remedy |
|---|---|---|
| 50 A ammeter clip cannot be connected | Connectors on the ammeter clip do not fit in the socket. | Use the size 2 adapter |
| Cable connection via LAN interface to diagnostic head interrupted | Plug-in connections on LAN adapter defective | Check that the plug-in connections are correctly seated and undamaged. Check whether the plug-in connection via the LAN control panel adapter (uncrossed) has been established. |
IMPORTANT:
Never use force to insert the connectors. The connectors on the measuring and diagnostic cables are marked with a red dot that must be aligned with a corresponding dot on the socket.