Vehicle - Initialization

The "Initialization" function provides access to three different functions:

• Start system time - Used to synchronize all modules contained on the vehicles byte flight bus.
• Delete fault memory.
• CAS or EWS calibration.

Fig 1: Display Screen - "Initialization" Function

Courtesy of BMW OF NORTH AMERICA, INC.

By selecting "Delete fault memory" the fault memory of all installed control modules will be cleared.

Fig 2: Display Screen - "Delete Fault Memory"

Courtesy of BMW OF NORTH AMERICA, INC.

Displays a report pertaining to the clearing of the fault memory on all installed modules.

Fig 3: Display Screen - Final Report

Courtesy of BMW OF NORTH AMERICA, INC.