Dis V57 Release Notes (M07 01 09)
Publication date: 2009-04-24Reference number: M07 01 09
DIS V57 RELEASE NOTES
TECHNICAL SERVICE BULLETIN
| MINI: | All |
| GROUP: | Workshop Environment Systems |
SUBJECT
DIS V57 Release Notes
SITUATION
The following Service Information covers the release notes for DIS V57. This information can always be accessed directly from the DIS/GT1 Diagnosis start screen.
CAUSE
DIS software errors/improvements
INFORMATION
MISCELLANEOUS
- MOST-ring break diagnosis
The waiting period before ring break diagnosis is executed has been reduced to 2 1/2 minutes. It is now required to disconnect the battery immediately.
ELECTRICAL DIAGNOSIS (SYMPTOM)
For troubleshooting without fault memory, new fault symptoms have been created for the following systems, or existing fault patterns have been expanded:
- Car Communication Computer (CCC)
- R56 - Power windows and central locking system
MODIFICATIONS IN DIAGNOSTICS BASED ON DIAGNOSIS FEEDBACK
For information on Diagnosis Feedback, refer to SI M07 05 06 .
TEST MODULES WITH MEASUREMENT TECHNOLOGY
Test modules that are contained in the test plan but cannot be started (grayed out) require the use of measurement technology. This behavior can occur with the GT1 if the Measurements Interface Box (MIB) is not connected. The test module concerned can be started following connection of the MIB. The behavior described cannot occur with DISPlus, because DISPlus is already integrated into the measurement technology.
USE OF OPS/OPPS
Due to the introduction of the D-CAN, the optical programming system (OPS) or optical testing and programming system (OPPS) must be used in conjunction with the associated cable (green marking and "CAN included" label) for diagnostics on the following models:
R55 and R56
WARRANTY INFORMATION
For information only.