Navigation System Operating Software (SI M84 04 03)

Publication date: 2008-06-23
Reference number: SI M84 04 03
Supersedes refnos: SI M65 05 03

NAVIGATION SYSTEM OPERATING SOFTWARE

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI M65 05 03, Date of Issue: June 23, 2008

MINI:	R50 (Cooper), R52 (Cooper, Cooper S Convertible), R53 (Cooper S)
GROUP:	Audio, Navigation, Monitors, Alarms, SRS

Superceded Bulletin(s): SI M65 05 03, Date of Issue: March 2008

NOTE: This Service Information bulletin supersedes SI M65 05 03 dated March 2008.

SUBJECT

Navigation System Operating Software

INFORMATION

Navigation system operating software V32 is used on MK III systems and DVD-Top navigation systems.

CORRECTION

Navigation system operating software should be updated under the following circumstances:

There are no corrections or new data included for the US market.
The navigation computer has been replaced.
If instructed by a Service Information bulletin or the Regional Technical Engineer (RTE).

CORRECTIONS INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V31

DVD-Top NAV system improved software for:

Reading Dual Layer DVD

NEW FEATURES INTRODUCED WITH NAVIGATION SOFTWARE V32

No new features

FEATURES INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V30 AND V31

No new features

FEATURES INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V29

Destination input screen text changes:

"State/Province" instead of "Country"
"City/Postal Code" instead of "City/ZIP"
"Town/City" instead of "City" (only in conjunction with road maps before 2006-2)

FEATURES INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V27 AND V28

Disclaimer screen disappears automatically after 8 seconds
Destination input when Country (UNITED STATES or CANADA) is selected via:
- ZIP code (only for UNITED STATES)
- City name
Destination input when an US State or a Canadian Province is selected via:

Street name
City name
ZIP code (only for UNITED STATES)

NOTE: Only in conjunction with NAVTEQ DVD road Map 2006-2 or a more recent version

POI (Point of Interest) icons and "City Center" icons are displayed together
Travel Information (TMC) is no longer displayed (is inactive and not selectable)
Entries in "Address Book/Last Destination" displayed as:
- City name, Street name (Destination entry via City name)
- ZIP code, City name, Street name (Destination entry via ZIP code)
Product Information

Legal disclaimer for usage of the navigation system and the data on the NAVTEQ road maps
How to report missing or incorrect data feedback to NAVTEQ:

Website: www.navteq.com

Phone: 1-888-navteq9 (628-8379)

FEATURES INTRODUCED WITH PRIOR SOFTWARE V26

The actual location is shown as an arrow in a circle.
The destination is marked with a checkered flag.
Map Positioning in "Travel Direction" can now be selected in scales up to 100 mls.
Disable Point of Interest (POI) icons is now selectable on I-Bus DVD NAV systems in:

General Destinations
Travel Information

After loading NAVI SW V32, the vehicle must be driven to ensure the proper function of the navigation system and the correct display of road number icons (e.g., interstate icons).

CHECKING SOFTWARE VERSION

MK III Systems

"Software Status" in the "Set" screen for the MK III system: for example, the software/hardware version is displayed as "3-1/63" or "3-2/63" (MK III with split screen). The numbers have the following meanings: the first digit 3 is a 3rd generation navigation system (MK III); the second digit 1 is a 1st device variant (top navigation - MK IIIc color screen), or 2 is a 2nd device variant (radio navigation - MK III m monochrome display); the last two digits 63 are the software version of the graphic component (6.3).

DVD-Top navigation system

"Software Status" in the "Set" screen for the DVD-Top navigation system: for example, the software/hardware version is displayed as "4-1/00". The numbers have the following meanings: the first digit 4 is a 4th generation navigation system (DVD); the second digit 1 is a 1st device variant (top navigation - DVD color screen), or 2 is a 2nd device variant (radio navigation - DVD monochrome display); the last two digits 00 are the software version of the graphic component (10.0).

CURRENT SOFTWARE VERSIONS

Software version	Application
6.3	MK3 with Split Screen
10.0	DVD-Top navigation system

LOADING SOFTWARE

For MK III and DVD-Top navigation systems use the following software loading instructions:

Turn the ignition to position 1 (terminal R).
NOTE: Do not cycle the key or perform diagnosis while installing the new software. Make sure that the power supply is stable, i.e., do not switch on any electrical loads.
Activate "GPS-Navigation" and acknowledge the screen disclaimer by pushing the rotary knob.
Remove the NAVTEQ road map CD/DVD from the navigation computer by pressing the "eject" button.
Insert the navigation system operating software CD (V32 P/N 01 59 0 141 891 index "y").
Mark III System (R50 and R53 from 03/02 production) or
DVD-Top navigation system (R50, R52, and R53 from 03/03 production):

After a few seconds, a menu of notes on the loading procedure and "progress" bar appear on the monitor.

When the loading process has been completed, the message "Software has been successfully loaded" is displayed.
Remove the navigation system operating software CD and confirm the end of the loading process by pressing the rotary push button on the board monitor. "OK" appears in the display.
Reinsert the NAVTEQ road map CD/DVD into the navigation computer.

TROUBLESHOOTING HINTS

The following problems may occur during the software loading procedure:

The message "CD defective" appears on the display screen.
The message "Fault during programming" appears on the display screen.
The message "The system is restarting" appears on the display screen.
The installation process has stopped; the display screen is blank; and the power LED on the navigation computer is off. The CD will not eject.

These complaints are usually the result of a faulty navigation system operating software CD.

For error messages that appear on the display screen, check for the correct software version and try loading a new navigation system operating software CD.
For a CD that will not eject from the navigation computer, follow the procedure below:
1. Remove the navigation computer.
2. Unplug the voltage supply (blue connector).
3. Reconnect the voltage supply and immediately press the eject button repeatedly until the CD in the drive is ejected.
4. Insert a new navigation system operating software CD and restart the installation process.

PARTS INFORMATION

Part Number	Description
01 59 0 141 891	Navigation Software CD V32 Index "y"

Copies of the NAV SW CD V32 will be shipped to every MINI dealer through the Automatic Tool Shipment Program.

WARRANTY INFORMATION

Updating the vehicle at the customer's request is not covered under warranty.