GT1 Troubleshooting: Printer
PRINTER - TROUBLESHOOTING CHART
| Symptom | Possible Causes | Remedy |
|---|---|---|
| Local Printer does not print | Printer connected to docking station, control panel undocked. | Dock the control panel or insert the USB cable on the printer in the control panel. Check that the connection is correctly seated. |
| Printer is defective. | In the "Administration" window, press the "Self-test" button and select the "Printer connection" function from the menu displayed. The printer should print a page with the heading "PS". If this does not occur, check the cable connection to the printer. | |
| Network Printer does not print. | Network printer connected via LAN cable to docking station; control panel undocked. | Dock the control panel. |
| Radio link to diagnostic head established | Disconnect the cable connection to the diagnostic head and established a connection to the network printer in accordance with Section 4.4.8. | |
| Cable link to diagnostic head established. | Disconnect the cable connection to the diagnostic head and established a connection to the network printer in accordance with Section 4.4.8. | |
| Printer Defective. | In the "Administration" window, press the "self-test" button and select the "printer connection" function from the menu displayed. The printer should print a page with the heading "PS". If this does not occur, chack whether the correct IP address for the printer is entered in the "Administration - Network configuration" window. |