Removal & Installation
WARNING: This page is about the Cooper Base, Automatic CVT, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Base | 9.3 | 6.8 | C | |
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CLUTCH RELEASE LEVER: Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: DIFFERENTIAL OUTPUT SEAL: Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: INPUT SHAFT SEAL: Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.4 | C | |||