Multi-Function Test Cable-MFK #2 (Four cable ends)

MFK 2 is used to measure:

• Voltage - up to 500 Volts
• Frequency
• Period
• Duty Cycle
• Pulse Duration
• Oscilloscope Measurements

Fig 1: Multi-Function Test Cable-Mfk #2 (Four Cable Ends)

Courtesy of BMW OF NORTH AMERICA, INC.

Both MFK 1 and MFK 2 can be used for signal outputs from the stimulate output function of the multimeter.

On MFK 2, the two large cable ends are for input only (measuring) and the two small ends are for the Stimulate Output function. MFK 1 's leads are for both measuring and stimulation.

Both large positive cable ends of MFK 1 and MFK 2 include a button used to hold the measured value on the display screen.

Fig 2: Freeze Button

Courtesy of BMW OF NORTH AMERICA, INC.