CIP Main Selection Screen
WARNING: This page does not describe the selected car, but rather 333 other vehicles, including the 2007 BMW Z4, 2007 BMW X5, 2007 BMW X3, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Selection of CIP functions/options:
Termin. CIP - End the CIP program and return to Progman home screen
Load SW - Load software function to be selected if:
- Control module has been replaced
- Retrofit process is to be carried out
- Vehicle software is to be updated
- Coding/programming of one or more module(s) is to be performed
CKM - Vehicle and Key Memory/Individualization allows various driver selectable features (such as drive way locking, seat memory, central locking/unlocking, daytime running lights etc.) to be coded to the vehicle or individual keys.
Management - Provides the ability to:
- display the current version of CIP installed
- print previously performed Service Measure Reports
- run a test on the software currently installed on system (SSS)
Vehicle - Allows access to:
- Vehicle Order
- Initialization
- Service Functions
- Complete vehicle coding