LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2011 >> Cooper Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1011 (Coding And Programming - Overview) >> Progman >> Starting a Programming or Coding Session with Progman >> Disconnecting From Interface To Be Used By Progman
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disconnecting From Interface To Be Used By Progman

WARNING: This page does not describe the selected car, but rather 333 other vehicles, including the 2007 BMW Z4, 2007 BMW X5, 2007 BMW X3, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

If the vehicle to be programmed was previously being diagnosed using a diagnostic head with the GT1, then the connection with the head must be broken before that head will be recognized by Progman.

Select "Service"

Select "Setting up a connection"

Fig 1: Selecting Service And Setting Up Connection Button
G03397974Courtesy of BMW OF NORTH AMERICA, INC.

Select "Quit connecting"

Fig 2: Selecting Quit Connecting Button
G03397975Courtesy of BMW OF NORTH AMERICA, INC.

The selected head is free/disconnected

Fig 3: Display Free Diagnostic Head Menu
G03397976Courtesy of BMW OF NORTH AMERICA, INC.

Select "End"

Fig 4: Selecting End Button
G03397977Courtesy of BMW OF NORTH AMERICA, INC.

Select "Change"

Select "Coding/Program"

Fig 5: Selecting Change And Coding/Program Button
G03397978Courtesy of BMW OF NORTH AMERICA, INC.

Select available SSS

Select "Continue"

Fig 6: Selecting Continue Button
G03397979Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals