CIP Functions - If Yes

WARNING: This page does not describe the selected car, but rather 333 other vehicles, including the 2007 BMW Z4, 2007 BMW X5, 2007 BMW X3, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

After selecting "Yes" on the Yes/No selection screen a determination/check of all installed control modules is performed.

Fig 1: Display Fitted Control Modules Determined Message

Courtesy of BMW OF NORTH AMERICA, INC.

Upon completing a check of the installed control modules, a list highlighting the installed control modules is displayed.

Select the control module(s) that were replaced and select continue.

Fig 2: Display Control Module Selection Screen

Courtesy of BMW OF NORTH AMERICA, INC.

After selecting the replaced module(s) and selecting continue a measures plan will be generated which compares the integration levels (actual vs. target) for not only the modules replaced but for all installed modules as well. If any of the installed control modules do not match the target level they will be updated along with the replacement modules.