Section 385 (Engine - Repair (M54))
WARNING: This page is about a different car, the 2005 BMW 530i, 2005 BMW 525i, 2004 BMW 530i, and 2004 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
- Engine, General
- Cylinder Head With Cover
- 11 12 000 Removing and installing, sealing cylinder head cover (M52TU / M54 / M56)
- 11 12 100 Removing and installing/replacing cylinder head (M52TU / M54 / M56)
- 11 12 101 Replacing cylinder head gasket (M52 / S52 / M52TU / M54 / M56)
- 11 12 503 Disassembling and assembling cylinder head (M52 / S52 / M52TU / M54 / M56)
- 11 12 527 Remachining a valve seat (M52 / S52 / M52TU / M54 / M56)
- 11 12 595 Checking a valve guide for wear (M52 / S52 / M52TU / M54 / M56)
- 11 12 600 Reaming a valve guide (M52 / S52 / M52TU / M54 / M56)
- 11 12 719 Resurfacing cylinder head sealing surface (M52 / M52TU / M54 / M56)
- 11 12 729 Checking cylinder head for watertightness (M52TU / M54 / M56)
- Oil Sump
- Housing Cover
- Crankshaft With Bearing
- Flywheel
- Vibration Damper
- Connecting Rod With Bearing
- Piston With Rings And Pin
- V-Ribbed Belt With Tensioner
- Camshaft
- Valves With Springs
- Variable Camshaft Timing
- Oil Supply
- Oil Pump With Filter And Drive
- Oil Filter and Lines
- Oil Filling, Dipstick
- Water Pump With Drive
- Thermostat And Connections
- Intake Manifold
- Air Pump, Lines And Fittings
- Emission Control, Oxygen Sensor
- Positive Crankcase Ventilation/Oil Separator