5.0 Engine Oil Change Intervals: Notes

WARNING: This page does not describe the selected car, but rather 180 other vehicles, including the 2014 BMW i8, 2014 BMW i3, 2014 BMW Z4, 2014 BMW X6 M, and 2014 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

With the introduction of the 1999 Model Year vehicles BMW has introduced an extended oil change interval of approximately 15, 000 miles (depending on engine operating conditions) on most models.

To coincide with the increased oil change interval, BMW has also introduced "BMW High Performance Synthetic Oil" which must be used on all 1999 Model Year vehicles (except E36 318ti, 323is/iC, 328is/iC, M3, M Roadster and M Coupe models) whenever a service is necessary.

NOTE: If it is necessary to top up the engine oil between oil changes use of synthetic low viscosity engine oils which conform to the API classification SL or higher is recommended.

BMW High Performance Synthetic Engine Oil may also be used on Model Year 1999 E36 (3-Series and M models) as well has Model Year 1998 and earlier BMW models.

The oil change intervals should not be extended due to the greater durability of a fully synthetic engine oil. The engine oil and filter should always be changed as per the vehicle's Service Interval Indicator when the "Oil Service" or the "Inspection" display appears regardless of the type of oil being used.

BMW mineral-based High Performance engine oil is also offered for model year 1998 and earlier BMW models. For reliable engine performance in all temperature ranges mineral-based engine oil viscosity must be matched to the temperature range at which the vehicle will be operated. See ENGINE OIL TEMPERATURE/VISCOSITY TABLE .