Coding & Programming Software

WARNING: This page does not describe the selected car, but rather 333 other vehicles, including the 2007 BMW Z4, 2007 BMW X5, 2007 BMW X3, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Whenever coding and programming are to be performed on a vehicle, the latest version of software for DISplus/GT1 and SSS must be loaded/installed on the equipment being used.

The DIS CD xx contains the diagnostic programs (test modules, schematics, system status values...) prior to CIP 15.0 all coding and programming information for early production vehicles (E31, E32, E34, E36, E38, E39, E46, E53 and E52) was also available.

NOTE: With the introduction of CIP 15.0 all coding and programming information will be migrated to CIP and incorporated within Progman.

Whenever a new version of either DIS CD xx or CIP xx.x is released this indicates that an update or addition to a specific coding, programming or diagnostic routine has occurred. The change can be reflected by a new/updated programming software for a specific control module, the ability to code a new module or the ability to perform a new retrofit procedure when installing a new system.