Control Module Selection - Programming - Update Software: Notes

WARNING: This page does not describe the selected car, but rather 333 other vehicles, including the 2007 BMW Z4, 2007 BMW X5, 2007 BMW X3, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

From the "Control module selection" screen specific control modules can be selected for reprogramming.

Select "Retrofits" if an accessory function/feature is to be added or deleted

Fig 1: Display Control Module Selection Screen (2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Example: DME DDE is selected on the previous screen.

By selecting "Programming" the software of the selected module can be updated or a measures plan for all installed modules can be obtained and updated.

Fig 2: Selecting Programming Button

Courtesy of BMW OF NORTH AMERICA, INC.

By selecting "Update Software" a measures plan will be generated that will indicate what updates if any are available not only for the DME but for all modules installed in the vehicle.

Fig 3: Selecting Update Software Button

Courtesy of BMW OF NORTH AMERICA, INC.

A "Measures plan" provides information on updates that are available for all installed control modules. By selecting accept, all modules listed in the measures plan will be updated.

NOTE: Prior to selecting accept printout a copy of the measures plan and attach it to the repair order to document the work performed.

IMPORTANT: If the measures plan identifies any control modules that will need to be replaced exit CIP.

Fig 4: Display Select Measures Plan Table

Courtesy of BMW OF NORTH AMERICA, INC.