Removal & Installation
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Base | 8.1 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CLUTCH RELEASE LEVER: Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: DIFFERENTIAL OUTPUT SEAL: Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: INPUT SHAFT SEAL: Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.4 | C | |||