Removal & Installation
TRANS ID - AISIN WARNER
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4 | 7.2 | C | ||
| Combination Procedure: CONVERTER DRIVE PLATE: Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: FRONT PUMP: Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: FRONT PUMP O-RING: Replace: | ||||
| 0.6 | B | |||
| Combination Procedure: FRONT PUMP SEAL: Replace: | ||||
| 0.4 | B | |||
| Combination Procedure: TORQUE CONVERTER: Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||
TRANS ID - TORQUEFLITE, MA-904A
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 7.2 | C | |||
| Combination Procedure: CONVERTER DRIVE PLATE: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: FRONT PUMP SEAL: Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: KICKDOWN BAND: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.4 | B | ||
| Combination Procedure: REACTION SHAFT &/OR BUSHING: Remove & Replace: | ||||
| 0.5 | A | |||
| Combination Procedure: REVERSE BAND: Remove & Replace: | ||||
| 2.0 | A | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||