Accelerator Cable
Keep ignition switch in "ON" position for at least 15 seconds before adjustment. Loosen adjusting nut so throttle lever is free. Turn accelerator adjusting nut so throttle lever just starts moving, then back off one turn. Lock adjusting nut with lock nut. Ensure idle position switch touches stopper after idle speed control adjustment.
TORQUE SPECIFICATIONS
| Application | INCH Lbs. (N.m) |
|---|---|
| Injector Holder Tightening Screws | 36-48 (4.5-5) |
| Injection Mixer Mounting Bolts | 132-168 (15-19.5) |