LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1988 >> Starion ESI-R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - ECI System >> Overhaul >> Fuel Injection Mixer >> Cleaning
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injection Mixer: Cleaning

  1. Clean all parts but do not immerse the following in solvent: throttle position sensor, variable resistor or ISC servo. Immersing these parts will damage the insulation. Wipe these parts with a cloth only.
  2. To clean injectors and fuel pressure regulator, seal fuel inlet and outlet with sealing tape and clean in solvent. Check vacuum port of passage for clogging. Clean vacuum passage and fuel passage with compressed air.
scientia non olet · About LEMON Manuals