LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Precis Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Hold-In Coil Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hold-In Coil Test

  1. Disconnect field coil wire from terminal "M" at starter solenoid. See Figure . Connect jumper wire between positive battery terminal of 12-volt battery and terminal "S" of starter solenoid.
  2. Connect a second jumper wire from negative battery terminal and touch starter case. If solenoid plunger is pulled in, hold-in coil is good. If solenoid plunger is not pulled in, replace solenoid.
scientia non olet · About LEMON Manuals