LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Precis Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Optical Ignition >> Power Transistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Transistor

  1. Disconnect power transistor connector. Using a 3.0-volt power source, connect negative end of power source to terminal No. 2 of power transistor and positive end to terminal No. 1. See Fig 1 .
  2. Using an analog ohmmeter, check for continuity between terminals No. 1 and 2 of power transistor. Continuity should exist. With positive end of 3.0-volt power source disconnected, there should be no continuity. Replace power transistor if it fails test.
    Fig 1: Identifying Power Transistor Connectors
    G93J78161Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals